Amphenol
®
PT Series
Miniature Cylindrical Connectors
12-070-19
www.amphenol-industrial.com
Amphenol® 97 Series Connectors are UL recognized and CSA recognized.
Table of Contents Page
Introduction, Amphenol® Miniature Cylindrical
General Information, Design Flexibility . . . . . . . . . . . . . . 1, 2
Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . 3
Insert availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 5
Alternate positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Insert arrangement patterns . . . . . . . . . . . . . . . . . . . . . . . . . 7-10
PT, SP, MS/PT Proprietary/MIL-DTL-26482, Series 1
Bayonet Coupling, Solder Contacts
General Information, Specifications, Service Class . . . . . . . . 11, 12
PT00 (MS3110), SP00 wall mounting receptacle . . . . . . . . . 13
PT01 (MS3111) cable connecting receptacle . . . . . . . . . . . .14
PT02 (MS3112) SP02 box mounting receptacle . . .. . . . . . . .15
PT06 (MS3116) SP06 straight plug . . . . . . . . . . . . . . . . . .16
PT07 (MS3114) SP07 jam nut receptacle . . . . . . . . . . . . . . . . . . . 17
PT08E, SP08E 90 degree plug . . . . . . . . . . . . . . . . . . . . .18
PT Connectors with Printed Circuit Board Contacts
box mount receptacle, jam nut receptacle . . . . . . . . . . . . . . . . . . .19
PTB, SPB thru bulkhead receptacle . . . . . . . . . . . . . . . . . . . . . . . . .20
General Information, Specifications - PT hermetic . . . . . . . 21
PTIH (MS3113H) hermetic solder mounting receptacle . . . . . . 22
PT02H hermetic box mounting receptacle . . . . . . . . . . . . . 23
PT07H (MS3114H) hermetic jam nut receptacle . . . . . . . . . .24
PT, SP, MS/PT how to order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
PT-SE, SP-SE, MS/PT-SE Proprietary/MIL-DTL-26482, Series 1
Bayonet Coupling, Crimp Contacts
General Information, Specifications, Service Class . . . . . . . .26, 27
PT00SE (MS3120), SP00SE wall mounting receptacle . . . . . . . . .28
MF00SE (MS3128) wall mounting receptacle . . . . . . . . . . . . . . . . .29
PT01SE (MS3121) SP01SE cable connecting receptacle . . . . . .30
PT02SE (MS3122) SP02SE box mounting receptacle . . . . . . . 31
MF02SE (MS3127) box mounting receptacle . . . . . . . . . . . . . . . .. 32
PT06SE (MS3126), SP06SE straight plug . . . . . . . . . . . . . . 33
PT07SE (MS3124) SP07SE jam nut receptacle . . . . . . . . . . 34
PT08SE, SP08SE 90 degree plug . . . . . . . . . . . . . . . . . . 35
PT-SE, SP-SE, MS/PT-SE how to order . . . . . . . . . . . . . . . . 36
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-40
Glands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Application tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Contacts, Power and Thermocouple Crimp . . . . . . . . . . . . . . . . . 43
Contacts, Shielded Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-48
Mounting Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .49
Other Amphenol Miniature Cylindrical Connectors . . . . . . . . . . . . . . . . . . 50
Proprietary/MIL-DTL-26482 Series 1 connectors covered in this
catalog are widely used in general duty and environmental
applications, both industrial and military. Markets that use this
family of connectors include:
• Instrumentation
• Monitoring Equipment
• Machine Tool, Factory Automation
• Communications
• Geophysical
• Industrial Controls and Robotics
• Oil and Petrochemical Industries
• Rail/Mass Transit
• Military/Aerospace
If more information is needed concerning
the connectors covered in this publication,
or if there are special application needs,
please contact:
Amphenol Corporation
Amphenol Industrial Operations
191 Delaware Avenue
Sidney, New York 13838-1395
Telephone: 888-364-9011
Fax: 520-397-7169
Please go to the Amphenol websites to
view, download and save this catalog and
most all of Amphenol interconnection
product literature.
www.amphenol-industrial.com
Some miniature connector styles are
available in RoHS Compliant versions.
Please contact Amphenol Industrial
Operations for more information.
Amphenol operates Quality Systems
that are certified to ISO 9001:2015; ISO
14001:2015; ISO/TS 16949:2016 by third
party registrars.
NOTE:
The connector products in this brochure
were formerly known as Bendix®
products. These products are now
manufactured and sold under the
Amphenol® brand name. The name
“Amphenol” will replace the name “Bendix”
on products and literature in the future.
NOTE:
The Miniature MIL-DTL-26482, Series
2 connectors PTS-DR and MS/PTS-DR
(formerly in this catalog) are no longer
supplied with these designations.
Amphenol now supplies the Amphenol®/
Matrix® MIL-DTL-26482, Series 2. (Military
numbers include MS3470 - MS3472,
MS3474, - MS3476).
Amphenol® Miniature Cylindrical Connectors
Proprietary/MIL-DTL-26482, Series 1
Amphenol® Miniature Cylindrical connectors offer twice the number of contacts in just half the size of a Standard
connector. These miniature connectors, are available in several series, each with varying design characteristics
and customer options to meet cost considerations and provide maximum design flexibility. There are two styles
within the family that are MS approved and qualified to MIL-DTL-26482, Series 1, and in addition there are several
proprietary styles.
Common features of all styles:
• All are for general duty applications and environmental sealing is achieved with the grommet and clamp design.
• Operating temperature is from –55°C to +125°; Operating voltage to 1000 VAC (RMS) at sea level.
• Pin and socket contacts are machined from low loss copper alloy and gold plated to eliminate contact corrosion and
provide an indefinite shelf life.
• All have resilient inserts which provide high dielectric strength and moisture barrier.
• A variety of shell finishes (including non-cadmium) and a variety of back-end accessories are available within the
styles.
Bayonet Coupling with Solder Contact Termination
PT Solder
jam nut receptacle and
mated straight plug
PT, MS/PT (solder)
• MS and proprietary versions
• Factory installed solder contacts
• 3 point bayonet coupling and 5 key/keyway mating.
• Intermateable with all miniature series
connectors.
• MS/PT meets MIL-DTL-26482 Series 1,
service classes E, F and P.
• MS/PT is UL recognized.
SP (solder)
• SP Series is a modification of the PT with
same features except a wider flange for
back panel mounting
Options
• 7 shell styles with 60 insert
patterns
• Hermetic seal (glass fusion)
receptacle styles available
• Pressurized thru bulkhead
receptacle style available
• Per-installed coax solder contacts are available
• Printed circuit board contacts
are available
Bayonet Coupling with Crimp Contact Termination
PT Solder
wall mount receptacle
PT-SE Crimp
wall mount receptacle
and mated straight plug
PT-SE, MS/PT-SE (crimp)
• MS and proprietary versions
• Crimp rear insertable/front release
contact termination. (closed entry socket
insert prevents probe damage).
• 3 point bayonet coupling and 5 key/keyway mating.
• Intermateable with all miniature series
connectors.
• MS/PT-SE meets MIL-DTL-26482 Series 1,
service classes E, F, P.
SP-SE (crimp)
• Modification of the PT-SE with wider
flange for back panel mounting
1
Options
• 6 shell styles with 47 insert
patterns
• Coax and thermocouple contacts are available
Amphenol Miniature Cylindrical
design flexibility
The large family of miniature proprietary and MS style connectors provides for
many optional features and designs. In addition to the choices of bayonet or threaded
shells, solder or crimp termination within the style variations, there are additional
options that are shown here.
Hermetics
Hermetically sealed receptacles have fused compression
glass sealed inserts which provide environmental moisture
sealing. There are three hermetic styles within the PT
bayonet series.
Coaxial Contacts
Amphenol Miniature connectors can incorporate shielded
coax contacts. Size 8 and 12 crimp coax contacts are
available in PT-SE, SP-SE, MS/PT-SE. Factory installed size 8
and 12 solder type coax contacts are available in PT, SP,
MS/PT connectors. See coax contact information pages at
the end of this catalog.
PT Connector with Hermetic
Seal Insert and Coax
Contacts
PT Connector with PC Tail
Contacts
Printed Circuit Board Tail Contacts
PT bayonet connectors in box mounting receptacle and jam nut receptacle styles are
available with printed circuit board contacts. Standard PCB tails for MIL-DTL-26482
connectors have gold plating, .0050 inches over nickel. See page 20 and call Amphenol
for further information.
Flex Circuitry
Flex termination assemblies for attaching cylindrical connectors to printed circuit
boards are available through the Amphenol division ACT, Advanced Circuit
Technology. Flex can be used with miniature 26482 connectors and it can be designed
to meet specific length, current carrying capacity and to fit the precise geometric
shape of the connector to board package. Flex circuity plugs into a printed circuit
board and creates a self-locking terminal pad which eliminates the need for an
additional interconnect to the PCB.
Filter Protection
Amphenol offers the FPT Series which combines the miniature PT series with an EMI
filter. Designed to provide EMI protection for sensitive circuits, each circuit is
individually filtered within the connector, eliminating the need for costly and bulky
exterior network filters. Filter contacts are available in MF, HF, VHF, and UHF ranges
and are intermateable and intermountable with MIL-DTL-26482 connectors. For
further information see catalog 12-120, Amphenol EMI Filter Transient Protection
Connectors.
PT Connector with Flex
PT Connector with EMI
Filter Protection
Overmolded Cable
Overmold seals and cables can be designed for almost any industrial application.
A variety of materials are available: neoprene, hypalon and others; and a variety of
lengths can be designed to meet customer specifications. Overmold seals to the rear
of the connector and to the cable jacket providing moisture sealing.
2
PT Connector with
Overmolded Cable
Amphenol Miniature Cylindrical
connector selection guide
The accompanying chart is provided to assist the user in selecting the appropriate type of miniature connector to
meet the application requirements. Further information can be found in specific sections of this catalog.
Solder
CHARACTERISTICS
Intermateable†
Contacts
Contact Retention System
Coupling
Solder
Crimp
PT
MS/PT
SP
MS/ PT-SE
PT-SE
O
O
O
O
O
•
•
•
•
•
•
•
•
•
•
•
•
•
•
**•
Crimp Ri/FR
Non-Removable
•
•
•
Removable
Bayonet
•
•
Olive Drab Cadmium (003)
•
•
•
Standard Finishes††
Anodic Coated (005)
Temperature Range
•
•
Resilient Dielectric (-55°C to +125°C)
•
Wide Mounting Flange
•
•
Hermetic Seal
•
•
•
Wall Mounting Receptacle “00”
•
•
•
Cable Connecting Receptacle “01”***
•
•
Box Mounting Receptacle “02”
*•
•
SHELL STYLE AVAILABILITY
•
•
•
•
**•
Straight Plug “06”
•
•
•
•
•
Jam Nut receptacle “07”
*•
*•
•
•
•
thru-bulkhead Receptacle “TB”
•
Solder Mount Receptacle “I”
*•
90° Plug “08”
•
•
*•
•
RI/FR = Rear Insertion/Front Releasable
† o intermates with o
†† Optional finishes available. See “how to order” sections.
* Available in hermetic version
** Dual mounting holes
*** This connector style is sometimes referred to as a cable connecting “plug.”
It does, however, mate with either a straight or 90 degree plug.
3
•
Amphenol Miniature Cylindrical
insert availability
Solder Termination
Insert
Arrangement
Crimp
Termination
Screw
Termination
MS/PT-SE
PT-SE
SP-SE
PT
Contact Size
Total
Contacts
SP
Hermetic
PT
MS-PT
X
X
X*
1
1
I
X
X
X
2
2
I
X
X
X
3
3
I
X
X
X
4
4
I
X
X
X
3
3
I
8-98
X
X
3
3
10-2
X
X
2
X
X
X*
X
X
X
10-7
X
X
X
10-70
X
X
MS/PT
PT
8-2
X
8-3
X
8-4
X
8-33
X
6-1
10-5
10-6
X
X
16
12
10
8
Coax
12
X
X
X
X*
12-3*
X
X
X
X
X
X
X*
Service
Rating
I
I
5
5
I
6
6
I
7
7
6
X
8
2
I
1
10-98
12-4
X
20
1
6
Coax
I
3
3
II
4
4
I
12-8
X
X
X
X*
X
8
8
I
12-10
X
X
X
X
X
10
10
I
12-14
X
X
14
14
I
12-98
X
X
10
10
14-2
X
X
2
S
S
X
X
X
X
X
5
8
6
X
X
12
8
4
I
1
I
14-4
14-5
X
14-8
I
2
4
II
4
I
5
II
X
X
14-12
X
X
X
14-15
X
X
X
X
X
15
14
14-18
X
X
X
X*
X
18
18
I
14-19
X
X
X
X
X
19
19
I
X*
5
1
14-71
P
X
14-91 HV
S
X
14-AA
X
X
X
X
14-22
16-8
X
X
X
16-23
X
X
X
16-26
X
X
X
X
X
16-70
4
X*
X
16-76†††
16-99
X
X
18-2
X
X
X
X
18-3
X
X
X
18-5
X
X
3
2
4
I
3
I
3
1
4
4
X
8
X
23
22
X
26
26
15
14
X*
14
8
X
23
21
X
8
II
1
I
I
1
2
5
18-8
3
5
8
X
X
X
X
X
11
18-30
X
X
X
X*
X
30
4
8
29
1
N/A
5
***
I
2
3
X*
**
I
2
18-11
*Not available in MS version
**Flashover voltage 5,000 VAC (RMS)
***1500 VAC (RMS)
S designates Socket insert only.
I
II
II
II
I
11
II
1
I
P designates Pin insert only.
†Size 12 contacts for #10 wire
††Not presently tooled
†††Contacts must be ordered separately
Amphenol Miniature Cylindrical
insert availability, cont.
Solder Termination
Insert
Arrangement
Crimp Termination
Contact Size
MS/PT
PT
SP
Hermetic
PT
MS-PT
MS/PT-SE
PT-SE
SP-SE
Total
Contacts
X
X
X
X
X
32
18-72
X
X
14
18-75
X
X
4
X
X
18-32
18-71
X*
18-76
20
18-91 HV
20-16
X
X
X
20-24
X
X
9
8
X*
6
6
X
16
X
24
24
X
25
25
20-26
X
X
26
26
20-27
X
X
X
27
27
20-39
X
X
X
X
X
39
39
20-41
X
X
X
X
X
41
41
14
10
7
7
X
X
X
X
X
X
X
X
X
X
22-34
X
22-36
X
Coax, I
**
II
I
I
6
I
I
2
I
I
4
Coax
Hi-Voltage
25
X
32
32
I
X
34
34
I
X
36
36
I
X
41
27
22-55
X
X
X
X
X
55
55
X
X
19
13
9
2
X
X
19
12
22-71
X*
22-78†††
22-96
X*
X
X
X
X
X
X
24-79
*Not available in MS version
**Flashover voltage 5,000 VAC (RMS)
***1500 VAC (RMS)
II
25
I
14
I
I
4
7
6
I, Coax
7
I, Coax
3
N/A
7
Coax
II
7†
31
X*
51
47
X
61
61
49
45
1
1
Coax
21
7
31
24-51†††
X
II
2
X*
X
24-71
1
21
X
24-61
N/A
X
X
X
X
Coax
7
X
24-31
4
7
22-41
22-72
Coax, II
X*
22-25
22-70
Service
Rating
1
16
X
22-7
8
4
3
6
X
20-90 HV
12
I
10
8
20-70
Coax
32
20-25
22-32
12
4
18-80
22-21
16
I
4
I
I
2
2
N/A
5
Coax
†Size 12 contacts for #10 wire
††Not presently tooled
†††Contacts must be ordered separately
5
Amphenol Miniature Cylindrical
alternate positioning
A
To avoid cross-plugging problems in applications requiring the use of
more than one miniature cylindrical connector of the same size and
arrangement, alternate insert rotations are available as indicated in the
accompanying chart.
B
A
B
Position W
Position X
Position Z
Insert Rotation
Degrees
W
Position Y
Views looking into front face of pin insert or rear of socket insert.
Insert Rotation
Insert
Arrangement
A
B
A
As shown in the diagram at right, the front face of the pin insert is
rotated within the shell in a clockwise direction from the normal shell
key. The socket insert would be rotated counterclockwise the same
number of degrees in respect to the normal shell key.
Shell
Size
B
Alternate Positioning
X
Y
Z
Shell
Size
Insert
Arrangement
Degrees
W
X
Y
Z
6
6-1
-
-
-
-
18
18-5
55
97
263
315
8
8-2*
58
122
-
-
18
18-8
180
-
-
-
8
8-3
60
210
-
-
18
18-11*
62
119
241
340
8
8-4*
45
97
184
-
18
18-30*
180
193
285
350
8
8-33*
90
-
-
-
18
18-32*
85
138
222
265
8
8-98
-
-
-
-
18
18-71
18
108
127
215
10
10-2
45
90
315
-
18
18-72
53
102
213
293
10
10-5*
45
151
180
270
18
18-75
45
-
-
-
10
10-6*
90
-
-
-
18
18-76
-
-
-
-
10
10-7
90
-
-
-
18
18-80
45
90
135
160
10
10-70
-
-
-
-
18
18-91HV
90
180
240
270
10
10-98*
90
180
240
270
20
20-16*
238
318
333
347
12
12-3
-
-
180
-
20
20-24
70
145
215
290
12
12-4*
38
-
-
-
20
20-25
72
144
216
288
12
12-8
90
112
203
292
20
20-26
13
107
210
322
12
12-10*
60
155
270
295
20
20-27
72
144
216
288
12
12-14
-
-
-
-
20
20-39*
63
144
252
333
12
12-98*
61
135
189
340
20
20-41*
45
126
225
-
14
14-2
58
122
-
-
20
20-70
63
135
222
335
14
14-4*
45
-
-
-
20
20-90
45
135
225
315
14
14-5*
40
92
184
273
22
22-7
19
41
-
-
14
14-8
48
162
189
312
22
22-21*
16
135
175
349
14
14-12*
43
90
-
-
22
22-25
60
125
211
336
14
14-15*
17
110
155
234
22
22-32
72
145
215
288
14
14-18*
15
90
180
270
22
22-34
62
142
218
298
288
14
14-19*
30
165
315
-
22
22-36
72
144
216
14
14-22
45
-
-
-
22
22-41
39
135
264
-
14
14-71
-
-
-
-
22
22-55*
30
142
226
314
14
14-91HV
-
60
-
-
22
22-70
30
82
218
312
14
14-AA*
45
-
-
-
22
22-71
33
191
236
270
16
16-8*
54
152
180
331
22
22-72
42
200
277
339
16
16-23
158
270
-
-
22
22-78
19
41
-
-
16
16-26*
60
-
275
338
22
22-96*
19
41
-
-
16
16-70
41
122
216
286
24
24-31
90
225
255
-
16
16-76
-
-
-
-
24
24-51
22
171
313
-
16
16-99*
66
156
223
340
24
24-61*
90
180
270
324
18
18-2
58
122
-
-
24
24-71
39
131
205
281
18
18-3
-
-
180
-
24
24-79
-
-
-
-
6
* Available in Hermetic Class
Amphenol Miniature Cylindrical
insert arrangements
D
C A
B
Insert Arrangement
A
B
A
C
A
C
C
B
B
B
B
A
A
6-1
8-2
8-3
8-4
8-33
8-98
Service Rating
I
I
I
I
I
I
I
Number of Contacts
1
2
3
4
3
3
2
Contact Size
20
20
20
20
20
20
16
E
D
F
D
C
D
Insert Arrangement
E
B
E
B
C
A
A
A
F
A
10-2
C
B
A
C
D
B
C
B
10-5
10-6
10-7
10-70
10-98
12-3
12-4
I
I
I
COAX
I
II
I
Service Rating
Number of Contacts
5
6
7
1
6
3
4
Contact Size
20
20
20
8 COAX
20
16
16
G
H
A
F
H
E
G
B
A
K
B
A
J
C
C
Insert Arrangement
12-8
D
E
A
H
G
K
R
N
12-10
A
C
F
H
L
M
K
J
F
D
B
E
D
F
J
E
P
12-14
B
C
D
A
C
B
B
E
D
C
D
12-98
14-2
14-4
14-5
Service Rating
I
I
I
I
II
I
II
Number of Contacts
8
10
14
10
2
4
5
Contact Size
20
20
20
20
12
12
16
A
H
G
D
J
K
L A
M
R
C
L
E
D
J
N
S
P
R
F
14-18
I
A
M
L
B
U
G
14-15
I
A
T
H
E
F
14-12
I
K
D
P
G
L
M
B
N C
H
F
14-8
Service Rating
K
B
M
E
Insert Arrangement
J
G
C
F
A
H
B
E
C
D
N
K
J
P
V
U
S
G
C
R
T
H
A
B
A
D
B
B
E
D
C
D
E
C
F
14-19
14-22
14-71
I
I
Number of Contacts
6
2
8
4
14
1
18
19
1
4
3
1
Contact Size
20
12
20
16
20
16
20
20
20
12
16
8 COAX
7
I
I
Amphenol Miniature Cylindrical
insert arrangements
A
A
A
N
G
D
M
B
L
H
C
F
B
B
C
C
Insert Arrangement
E
P
A
S
Z
X
M
D
J
D
C
U
W
V
H
G
E
K
F
U
b
Y
V
W
X
J
14-91HV
14-AA
16-8
16-23
16-26
I
II
I
I
Number of Contacts
3
4
8
22
1
26
Contact Size
20
12
16
20
16
20
A
A
B
G
N
N
J
L
P
N
C
J
F
E
Insert Arrangement
H
C
R
M
M
K
G
D
L
D
M
L
E
Y
A
R
P
B
K
H
P
S
X
U
C
D
V
W
E
F
K
J
F
H
G
16-70
16-76
16-99
18-2
18-3
N/A
Flashover
1,500 VAC (RMS)
I
II
II
Service Rating
F
B
T
Z
E
G
H
Flashover
5,000 VAC (RMS)
Service Rating
C
D
c
Z
L
B
T
N a
T
K
A
R
S
P
B
R
Y
Number of Contacts
14
1
8
1
5
21
2
2
3
Contact Size
20
12 COAX
20
12*
2 COAX
20
16
8
10
*Contact Positions Optional
A
J
G
A
H
E
B
D
C
R
P
B
K
H
C
L
G
Insert Arrangement
F
D
f
g
a
D
E
C
U
e
D
V
Z
L
E
B
T
b
M
C
d
c
N
F
A
S
A
B
K
Y
E
W
X
F
G
H
J
18-5
18-8
18-11
Service Rating
II
I
II
Number of Contacts
5
8
11
29
1
Contact Size
12
12
16
20
16
T
S
R
P
N
j
g
Y
a
Z
H
J
A
B
K
J
D
X
h
b
K
Service Rating
C
W
c
L
H
B
V
f
d
M
Insert Arrangement
A
U
e
18-30
I
A
L
J
G
B
C
P
E
C
H
F
F
G
N
G
D
F
E
D
A
C
B
M
D
E
18-32
18-71
18-72
18-75
I
II, COAX
N/A
COAX
Number of Contacts
32
8
1
10
4
4
Contact Size
20
16
8 COAX
20
12 COAX
8 COAX
8
Amphenol Miniature Cylindrical
insert arrangements
L
A
A
H
B
D
B
M
B
N
S
C
C
J
F
G
C
A
K
A
E
P
R
B
D
H
F
D
D
E
Insert Arrangement
Number of Contacts
C
E
F
18-76
18-80
18-91 HV
20-16
II
I, COAX
Flashover
5,000 VAC (RMS)
II
Service Rating
Contact Size
G
3
1
6
2
6
16
12 COAX
8 COAX
20
8 COAX
20
16
L
W
K
a
V
J
H
N
X
U
G
S
L
V
R
T
E
P
N
U
a
F
D
M
B
a
W
c
b
Z
X
P
C
20-25
N
D
B
a
b
d
Y
c
G
X
K
J
J
G
H
20-26
20-27
I
25
20
6
27
Contact Size
20
20
20
12
20
W
T
S
A
C
Z
m
r
h
V
Y
k
i
a
R
P
g
N
q
M
c
Service Rating
d
e
L
Insert Arrangement
b
n
p
f
K
J
A
W
B
X
U
D
E
F
T
I
B
m
s
h
t
g
R
G
P
H
N
d
M
H
H
c
e
C
G
J
F
B
E
D
N
F
K
L
G
G
b
p
q
M
F
n
f
B
P
a
r
S
A
A
E
Z
I
L
J
D
Y
k
i
K
C
X
j
E
20-39
20-41
20-70
20-90
I
I
COAX
HI-VOLTAGE
37
2
41
10
4
7
Contact Size
20
16
20
20
8 COAX
20
A
F
P
A
N
M
B
C
X
E
C
S
D
D
U
J
S
a
D
E
F
G
H
J
d
D
U
X
H
V
W
F
G
22-7
22-21
22-25
COAX
II
I
I
7
21
25
32
8 COAX
16
16
20
9
T
e
f
Y
V
J
B
S
C
j
g
Z
K
U
W
R
c
h
L
T
a
A
P
b
M
C
E
F
G
Contact Size
B
Z
b
K
T
H
Number of Contacts
X
L
V
K
Y
M
R
W
N
A
R
N
B
P
L
G
Service Rating
C
D
Number of Contacts
Insert Arrangement
F
V
W
I
V
E
U
L
24
j
D
T
Number of Contacts
U
C
S
Z
M
E
F
H
Y
K
H
J
T
A
R
A
V
L
G
K
E
S
D
Z
20-24
Service Rating
C
b
F
Insert Arrangement
U
Y
C
R
T
B
S
X
W
M
P
Z
P
N
B
Y
A
R
A
M
22-32
E
Amphenol Miniature Cylindrical
insert arrangements
A
T
S
d
R
N
k
b
R
C
V
e
c
P
h
M
M
F
K
Insert Arrangement
b
L
H
J
K
E
T
Z
d
g
G
e
N
i
N
M
FF
f
e
g
L
22-36
22-41
I
I
Number of Contacts
34
36
27
14
55
Contact Size
20
20
20
16
20
H
B
U
L
N
S
E
B
C
G
U
T
P
N
M
D
F
E
E
C
D
22-70
Service Rating
L
G
C
G
F
V
H
F
Insert Arrangement
S
R
E
H
B
J
G
D
R
A
A
K
B
C
P
J
I
J
F
V
T
K
22-55
A
A
D
22-71
i, COAX
22-72
I, COAX
22-78
N/A
COAX
Number of Contacts
12
6
2
7
12
4
3
7
Contact Size
20
8 COAX
20
8 COAX
20
16
8 COAX
8 COAX
M
L
A
A
N
Z
F
Y
B
E
R
c
d
V
H
V
U
S
T
G
B
c
d
BB
z
w
x
R
m
P
h
i
n
j
k
M
N
G
g
H
J
K
V
GG
r
U
q
T
FF
EE
p
S
L
P
BB
m
k
N
M
22-96
24-31
24-51
Service Rating
II
I
I
Number of Contacts
7
31
47
4
61
12 for #10 WIRE
16
20
12 COAX
20
Contact Size
a
Z
Y
W
r
B
b
u
d
e
p
U
f
m
x
S
R
Insert Arrangement
Service Rating
k
P
v
w
i
j
N
M
h
L
L
J
K
I
Contact Size
A
20
F
g G
n
T
D
E
j
24-61
Symbol
D
AA
BB
H
i
Contact Legend
F
C
c
z
y
q
V
A
t
s
X
G
h
AA
CC
F
g
z
DD
E
f
y
KK
LL
n
R
PP
D
e
x
JJ
NN
C
d
w
HH
MM
B
c
v
u
s
A
b
a
t
W
F
f
p
X
E
e
v
CC
q
Y
D
AA
DD
Z
C
y
S
F
D
Insert Arrangement
s
T
E
U
A
b
u
r
D
a
t
W
C
g
W
C
X
Q
b
e
J
Y
P
f
X
G
Z
B
a
K
G
H
J
I
M
c
d
K
22-34
Service Rating
F
b
u
v
E
a
t
w
D
Z
s
DD
x
M
Y
r
CC
EE
K
L
BB
HH
y
J
P
X
q
GG
h
H
f
R
G
H
J
p
q
h
F
j
C
W
p
AA
z
P
B
V
n
m
k
R
E
c
t
S
F
b
n
s
D
A
U
T
S
C
m
r
X
Y
a
U
B
a
i
D
A
Z
k
j
V
W
j
k
W
C
h
l
c
G
Z
L
X
V
g
m
d
Y
a
Y
B
n
N
E
X
g
j
f
e
P
D
A
U
W
f
l
T
S
B
U
16
E
C
B
12
H
J
K
HV
24-71
24-79
N/A
COAX
Number of Contacts
45
2
2
1
Contact Size
20
16
8 COAX
20
12 COAX
5
10
8 COAX
8 COAX
Amphenol PT, SP, MS/PT
Proprietary/MIL-DTL-26482, Series 1
bayonet coupling and solder termination
wall mounting
receptacle
cable
connecting
receptacle*
box mounting
receptacle
straight plug
Amphenol® solder contact miniature cylindrical connectors meet the
most critical application needs. Design versatility combined with high
reliability performance makes these series of Miniature Cylindrical
Connectors ideal for environmental sealing or pressurized applications.
The MS/PT Series is qualified to MIL-DTL-26482, Series 1 and has all the outstanding
design characteristics and quality of the PT Series. The SP Series is a modification
of the PT, providing special shells with a wide mounting flange for back panel
mounting.
A corrosion resistant electrically conductive finish of cadmium plate with an olive
drab chromate after-treatment is used on the PT and MS/PT. The SP is given a
durable non-conductive hard anodic “Alumilite”® coating which provides abrasion
protection and resistance to corrosion.
**NEW** 500 hour corrosion resistance, RoHS compliant harsh environment
conductive plating. Gray Zinc over an Electroless Nickel (Gray ZnNi) base, with a Light
Gun Metal Gray appearance.
Shell components for these series are aluminum. The dependable 5 key/keyway
polarization with bayonet lock coupling assures positive mating with no chance
of cross plugging. Spring tension provided by a wave washer in the coupling nut
ensures maintenance of interfacial seal between mating halves.
Both the insert and main joint gasket are molded from resilient neoprene. This
provides excellent moisture sealing at the gasket and superior electrical isolation of
the contact in the insert.
Both pins and sockets are machined from a copper alloy and are gold plated.
This gold plating eliminates contact corrosion and offers an indefinite shelf life.
Socket contacts for these series are a closed entry design. A breakaway style plug is
available in the PT solder series. Hermetics receptacles are available in PT and MS/
PT solder series. Receptacles with printed circuit board contacts are also available.
PT Solder is UL recognized under file #E115497, Vol. 1, Sec. 5. The PT, SP and MS/PT
Series are intermateable and intermountable with all existing Miniature Cylindrical
Series connectors.
Refer to pages 4-10 for insert arrangement availability.
PT, SP, MS/PT
Table 1: CONTACT DATA/CONNECTOR RATINGS
Contact Specifications
jam nut
receptacle
Contact
Size
Test Current
Maximum Millivolt
Drop†
20
7.5
55
Solder Well
Diameter
.046
16
13.0
50
.078
12
23.0
42
.116
+.004
-.000
+.005
-.003
+.004
-.002
Solder Well
Depth
+.031
.125
-.000
+.031
-.000
+.031
-.000
.188
.188
Service Rating
thru bulkhead
receptacle
Service
Rating
Recommended
Operating
AC Voltage at Sea
Level
Sea
Level
50,000 ft.
70,000 ft.
110,000
ft.
I
600
1,500
500
375
200
II
1,000
2,300
750
500
200
11
Test Voltage AC (RMS), 60 cps
† Silver plated wire
per MIL-DTL-26482
* This connector
style is sometimes
referred to as a
cable connecting
“plug.” It does,
however, mate
with a straight or
90 degree plug.
Amphenol PT, SP, MS/PT
Proprietary/MIL-DTL-26482, Series 1
bayonet coupling and solder termination, cont.
PT, SP Service Classes
PT and SP connectors are available in the service classes listed below.
Each class, with the exception of hermetic, offers one or more means of
terminating or supporting a cable or wire bundle.
“A”
General duty; back shell is threaded for conduit
attachment of MS3057 cable clamp
“A” (SR) General duty, with strain relief clamp for cable
or wire bundle support
“C”
Pressurized receptacle; less than 1 cu. in. per
hour leakage at 30 psi over a temperature
range of –65°F to +257°F
“E”
Environmental resistant connectors - supplied
with a multi-holed grommet and clamping
nut for moisture-proofing individual open
wires
“E” (SR) Environmental resistant strain relief clamp
and grommet for moisture proofing individual
wires; provides added wire bundle support
“P”
Translucent nylon boot for retaining customer
applied potting compounds; held in
place by a threaded ring
“P” (SR) Strain relief clamp suitable for retaining customer
applied potting compounds, with provision
for wire support
“PG” Compressing cable gland for moisture proofing
jacketed cables.
“H”* Hermetically sealed with compression glass
inserts (see pages 22-25)
“A” general
duty
“E” (SR),
MS/”F”
strain relief
“E”,
MS/”E”
open wire seal
Style with printed circuit board contacts- see page 20.
MS/PT Service Classes
The MS/PT Miniature connector is available in the following certified
service classes:
“E”
“F”
“J”
“P”
Environmental resistant connectors - supplied
with a multi-holed grommet and clamping
nut for moisture-proofing individual open wires
Grommet seal with strain relief clamp
Compressing clamp and neoprene gland for
moisture proofing multi-conductor jacketed
cable and strain relief. Telescoping sleeves
(MS 3420A) can be used to adapt to cables
smaller than minimum close-down.
Translucent nylon boot for retaining customerapplied potting compounds; held in
place by a threaded ring
“P”
MS/ “P”
potting boot
“PG”
cable gland
seal
12
PT00 (MS3110)
SP00
wall mounting receptacle
S
R
L
PT
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
SP
.150 ± .005 Dia.
(TP)
4 Holes
R S
“PG” Cable Gland Seal
A
(TP)
K
TERMINATION ASSEMBLIES
“A” General Duty/
“C” Pressurized“
L
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
N
“E” Open Wire Seal
GDH
N
D
L
Z
“P” Potting Boot
N
N
N
D
“J” Cable Seal
PT00A-XX-XXX
SP00A-XX-XXX
PT00C-XX-XXX
PU
XL
C
.375 MIN
D
PT00PG-XX-XXX
L
L
L
V
Q
M
PT00A-XX-XXX (SR)
SP00A-XX-XXX (SR)
PT00E-XX-XXX (SR)
SP00E-XX-XXX (SR)
PT00P-XX-XXX (SR)
SP00P-XX-XXX (SR)
MS3110F-XX-XXX
PT00E-XX-XXX
SP00E-XX-XXX
MS3110E-XX-XXX
PT00P-XX-XXX
SP00P-XX-XXX
MS3110P-XX-XXX
N
D
RELEASED / Dec . 21 2015, 2:09:12 PM
MS3110J-XX-XXX
To complete part number see how to order on page 25.
■ (MMC) located within .0025 of (TP)
Receptacle Front View
Shell
Size
6
8
10
12
14
16
18
20
22
24
R
(TP)
S
Max.
Receptacle Side View
PT
SP
PT
SP
A
+.001
-.005
.469
.594
.719
.812
.906
.969
1.062
1.156
1.250
1.375
.641
.734
.812
.938
1.031
1.125
1.203
1.297
1.375
1.500
.688
.812
.938
1.031
1.125
1.219
1.312
1.438
1.562
1.688
.953
1.047
1.125
1.250
1.344
1.438
1.516
1.672
1.750
1.875
.348
.473
.590
.750
.875
1.000
1.125
1.250
1.375
1.500
K +.020
-.010
PT
SP
.524
.524
.524
.524
.524
.524
.524
.650
.650
.650
6
8
10
12
14
16
18
20
22
24
.906
.906
.906
.906
.906
.906
.906
1.125
1.125
1.125
Class “A”, “C”
Z
Max.
PT
SP
Q
Thread
Class 2A
.431
.431
.431
.431
.431
.431
.431
.556
.556
.589
.462
.462
.462
.462
.462
.462
.462
.556
.556
.556
.3125-32 NEF
.4375-28 UNEF
.5625-24 NEF
.6875-24 NEF
.8125-20 UNEF
.9375-20 UNEF
1.0625-18 NEF
1.1875-18 NEF
1.3125-18 NEF
1.4375-18 NEF
L Max.
.493
.493
.493
.493
.493
.493
.493
.650
.650
.650
Class “A” (SR), “E” (SR), “P” (SR), MS/”F”
Shell
Size
M +.010
-.000
Class “e”,
MS/”E”
PT
SP
.468
.468
.468
.468
.468
.468
.531
.531
.531
.498
.438
.438
.438
.438
.438
.438
.438
.531
.531
.498
Class “P”, MS/”P”
D Min.
L
Max.
N
Max.
V
Thread
Class A
.175
.297
.421
.546
.663
.787
.879
1.014
1.134
1.259
1.553
1.553
1.553
1.553
1.553
1.553
1.553
1.703
1.703
1.765
.462
.590
.717
.834
.970
1.088
1.216
1.332
1.460
1.585
.3750-32 NEF
.5000-28 UNEF
.6250-24 NEF
.7500-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.1875-18 NEF
1.1875-18 NEF
1.4375-18 NEF
1.4375-18 NEF
Class “J”
D
Class “PG”
C
Thread
D
Min.
G
Max.
H
Max.
L
Max.
N
Max.
L
Max.
N
Max.
D
Min.
L
Max.
N
Max.
Closed
Free
N
Max.
XL
Max.
B
Thread
L
Max.
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
8-32
.240
.302
.428
.552
.615
.740
.740
.928
.990
.125
.188
.312
.375
.500
.625
.625
.750
.800
.812
.875
1.000
1.125
1.188
1.438
1.438
1.625
1.719
1.922
1.922
1.922
1.922
2.047
2.078
2.344
2.344
2.406
.550
.675
.803
.920
1.047
1.165
1.290
1.418
1.543
1.266
1.266
1.266
1.266
1.266
1.266
1.266
1.516
1.516
1.578
.440
.560
.685
.813
.930
1.057
1.175
1.301
1.430
1.555
.192
.317
.434
.548
.673
.798
.899
1.024
1.149
1.274
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.656
1.656
1.717
.484
.608
.734
.858
.984
1.110
1.234
1.360
1.484
1.610
.168
.205
.338
.416
.550
.600
.635
.670
.740
.230
.312
.442
.539
.616
.672
.747
.846
.894
.547
.675
.812
.940
1.067
1.194
1.322
1.449
1.576
2.271
2.271
2.411
2.599
2.943
3.172
3.610
3.766
3.985
M12x1.5-6H
M16x1.5-6H
M16x1.5-6H
M18x1.5-6H
M22x1.5-6H
M25x1.5-6H
M25x1.5-6H
M32x1.5-6H
M32x1.5-6H
.936
.936
.936
.936
.936
.936
1.180
1.180
1.180
All dimensions for reference only.
13
PT01 (MS3111)
cable connecting receptacle
L
S
M
Y
S
“PG” Cable Gland Seal
Q
A
L
K
Z
N
TERMINATION ASSEMBLIES
“A” General Duty
L
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
“E” Open Wire Seal
PT01PG-XX-XXX
L
L
L
V
D
“P” Potting Boot
“J” Cable Seal
N
D
GD H
N
N
N
D
XL
C
.375 MIN
PT01A-XX-XXX (SR)
PT01E-XX-XXX (SR)
PT01P-XX-XXX (SR)
MS3111F-XX-XXX
PT01A-XX-XXX
PT01E-XX-XXX
MS3111E-XX-XXX
PT01P-XX-XXX
MS3111P-XX-XXXX
N
D
RELEASED / Dec . 21 2015, 2:09:12 PM
Note: This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
To complete part number see how to order on page 25.
Receptacle
Front View
Shell
Size
Receptacle Side View
K
+.020
-.010
S
±.020
Y
±.020
A
+.001
-.005
6
.688
.812
.348
.494
.906
8
.812
.938
.473
.494
.906
10
.938
1.062
.590
.494
12
1.031
1.156
.750
.494
14
1.125
1.250
.875
16
1.219
1.344
1.000
18
1.312
1.438
1.125
20
1.438
1.562
1.250
22
1.562
1.688
24
1.688
1.812
M
+.016
-.000
C
Thread
D
Min.
Class “A”, “C”
Q
Thread
Class 2A
Z
Max.
D
Min.
L
Max.
N
Max.
.400
.3125-32 NEF
.948
.175
1.553
.462
.3750-32 NEF
.400
.4375-28 UNEF
.948
.297
1.553
.590
.5000-28 UNEF
.906
.400
.5625-24 NEF
.948
.421
1.553
.717
.6250-24 NEF
.906
.400
.6875-24 NEF
.948
.546
1.553
.834
.6250-24 NEF
.494
.906
.400
.8125-20 UNEF
.948
.663
1,553
.970
.8750-20 UNEF
.494
.906
.400
.9375-20 UNEF
.948
.787
1.553
1.088
1.0000-20 UNEF
.494
.906
.400
1.0625-18 NEF
.948
.879
1.553
1.216
1.1875-18 NEF
.650
1.125
.535
1.1875-18 NEF
1.166
1.041
1.703
1.332
1.1875-18 NEF
1.375
.650
1.125
.535
1.3125-18 NEF
1.166
1.135
1.703
1.460
1.4375-18 NEF
1.500
.683
1.188
.568
1.4375-18 NEF
1.166
1.259
1.703
1.585
1.4375-18 NEF
L Max.
Class “A” (SR), “E” (SR), “P” (SR), MS/”F”
Shell
Size
MS3116J-XX-XXX
G
Max.
H
Max.
L
Max.
N
Max.
Class “e”,
MS/”E”
Class “P”, MS/”P”
L
Max.
N
Max.
D
Min.
L
Max.
N
Max.
V
Thread
Class A
Class “J”
D
Closed
Free
Class “PG”
N
Max.
XL
Max.
B
Thread
L
Max.
6
-
-
-
-
-
-
1.266
.440
.192
1.438
.484
-
-
-
-
-
-
8
6-32
.240
.125
.812
1.922
.550
1.266
.560
.317
1.438
.608
.168
.230
.547
2.271
M12x1.5-6H
.936
10
6-32
.302
.188
.875
1.922
.675
1.266
.685
.434
1.438
.734
.205
.312
.675
2.271
M16x1.5-6H
.936
12
6-32
.428
.312
1.000
1.922
.803
1.266
.813
.548
1.438
.548
.338
.442
.812
2.411
M16x1.5-6H
.936
14
6-32
.552
.375
1.125
1.922
.920
1.266
.930
.673
1.438
.673
.416
.539
.940
2.599
M18x1.5-6H
.936
16
6-32
.615
.500
1.188
2,047
1.047
1.266
1.057
.798
1.438
.798
.550
.616
1.067
2.943
M22x1.5-6H
.936
18
8-32
.740
.625
1.438
2.078
1.165
1.266
1.175
.899
1.438
.899
.600
.672
1.194
3.172
M25x1.5-6H
.936
20
8-32
.740
.625
1.438
2.344
1.290
1.516
1.301
1.024
1.656
1.024
.635
.747
1.322
3.610
M25x1.5-6H
1.180
22
8-32
.928
.750
1.625
2.344
1.418
1.516
1.430
1.149
1.656
1.149
.670
.846
1.449
3.766
M32x1.5-6H
1.180
24
8-32
.990
.800
1.719
2.406
1.543
1.516
1.555
1.274
1.717
1.274
.740
.894
1.576
3.985
M32x1.5-6H
1.180
All dimensions for reference only.
14
PT02 (MS3112)
SP02
box mounting receptacle
S
R
(TP)
L
PT
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
M
SP
.150 ± .005 Dia.
R S
(TP)
4 Holes
A
N
K
Z
PT02A-XX-XXX
SP02A-XX-XXX
* PT02C-XX-XXX
* SP02C-XX-XXX
* PT02E-XX-XXX
* SP02E-XX-XXX
MS3112E-XX-XXX
* PT02P-XX-XXX
* SP02P-XX-XXX
MS3112P-XX-XXX
To complete part number see how to order on page 25.
■ (MMC) located within .0025 of (TP)
* The PT02 and SP02 box mounting receptacles are made only to complete a series;
no provision is made for accessories or potting on the rear skirt.
Receptacle Front View
Shell
Size
R
(TP)
Receptacle Side View
S
A
+.001
-.005
K
+.020
-.010
M
+.031
-.000
L Max.
N
Dia.
Max.
Z
Max.
PT
SP
PT
SP
PT
SP
PT
SP
PT
SP
6
.469
.641
.688
.953
.348
.493
.524
.825
.431
.462
.323
.465
.438
8
.594
.734
.812
1.047
.473
.493
.524
.825
.431
.462
.449
.465
.438
10
.719
.812
.938
1.125
.590
.493
.524
.825
.431
.462
.573
.465
.438
12
.812
.938
1.031
1.250
.750
.493
.524
.825
.431
.462
.699
.465
.438
14
.906
1.031
1.125
1.344
.875
.493
.524
.825
.431
.462
.823
.465
.438
16
.969
1.125
1.219
1.438
1.000
.493
.524
.825
.431
.462
.949
.465
.438
18
1.062
1.219
1.312
1.516
1.125
.493
.524
.825
.431
.462
1.073
.465
.438
20
1.156
1.312
1.438
1.672
1.250
.650
.650
1.076
.556
.556
1.199
.526
.531
22
1.250
1.438
1.562
1.750
1.375
.650
.650
1.076
.556
.556
1.323
.526
.531
24
1.375
1.562
1.688
1.875
1.500
.683
.683
1.109
.589
.589
1.449
.493
.497
All dimensions for reference only.
15
PT06 (MS3116)
SP06
S
straight plug
“PG” Cable Gland Seal
TERMINATION ASSEMBLIES
“A” General Duty
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
L
“E” Open Wire Seal
“P” Potting Boot
L
L
L
V
L
N
D
PT06PG-XX-XXX
N
D
GDH
N
N
N
D
“J” Cable Seal
C
.375 MIN
PT06A-XX-XXX
SP06A-XX-XXX
PTG06A-XX-XXX
PT06A-XX-XXX (SR)
SP06A-XX-XXX (SR)
PTG06A-XX-XXX (SR)
PT06E-XX-XXX (SR)
SP06E-XX-XXX (SR)
PTG06E-XX-XXX (SR)
PT06P-XX-XXX (SR)
SP06P-XX-XXX (SR)
PTG06P-XX-XXX (SR)
MS3116F-XX-XXX
PT06E-XX-XXX
SP06E-XX-XXX
PTG06E-XX-XXX
MS3116E-XX-XXX
PT06P-XX-XXX
SP06P-XX-XXX
PTG06P-XX-XXX
MS3116P-XX-XXX
XL
N
D
RELEASED / Dec . 21 2015, 2:09:12 PM
MS3116J-XX-XXX
To complete part number see how to order on page 25.
Shell
Size
Plug Front View
Plug Side View
S
Max.
J
L
Max.
6
.625
.353
8
.750
.353
10
.859
.353
12
1.013
.353
Class “A”
Q Thread
Class 2A
Z
Max.
D
Min.
L
Max.
N
Max.
V Thread
Class A
.906
.3125-32 NEF
.594
.175
1.609
.462
1.4375-18 NEF
.906
.4375-28 UNEF
.594
.297
1.609
.590
.5000-28 UNEF
.906
.5625-24 NEF
.594
.421
1.609
.717
.6250-24 NEF
.906
.6875-24 NEF
.594
.546
1.609
.834
.7500-20 UNEF
14
1.156
.353
.906
.8125-20 UNEF
.594
.663
1.609
.970
.8750-20 UNEF
16
1.281
.353
.906
.9375-20 UNEF
.594
.787
1.609
1.088
1.0000-20 UNEF
18
1.391
.353
.906
1.0625-18 NEF
.594
.879
1.609
1.216
1.1875-18 NEF
20
1.531
.415
1.062
1.1875-18 NEF
.672
1.014
1.656
1.332
1.1875-18 NEF
22
1.656
.415
1.062
1.3125-18 NEF
.672
1.135
1.656
1.460
1.4375-18 NEF
24*
1.776
.415
1.125
1.4375-18 NEF
.672
1.259
1.750
1.587
1.4375-18 NEF
Class “A” (SR), “E” (SR), “P” (SR), MS/”F”
Shell
Size
Class “e”,
MS/”E”
Class “P”, MS/”P”
Class “J”
D
Class “PG”
C
Thread
D
Min.
G
Max.
H
Max.
L
Max.
N
Max.
L
Max.
N
Max.
D
Min.
L
Max.
N
Max.
Closed
Free
N
Max.
XL
Max.
B
Thread
L
Max.
6
-
-
-
-
-
-
1.266
.440
.192
1.438
.484
-
-
-
-
-
-
8
6-32
.240
.125
.812
1.922
.550
1.266
.560
.317
1.438
.608
.168
.230
.547
2.271
M12x1.5-6H
.936
10
6-32
.302
.188
.875
1.922
.675
1.266
.685
.434
1.438
.734
.205
.312
.675
2.271
M16x1.5-6H
.936
12
6-32
.428
.312
1.000
1.922
.803
1.266
.813
.548
1.438
.858
.338
.442
.812
2.411
M16x1.5-6H
.936
14
6-32
.552
.375
1.125
1.922
.920
1.266
.930
.673
1.438
.984
.416
.539
.940
2.599
M18x1.5-6H
.936
16
6-32
.615
.500
1.188
2.047
1.047
1.266
1.057
.798
1.438
1.110
.550
.616
1.067
2.943
M22x1.5-6H
.936
18
8-32
.740
.625
1.438
2.078
1.165
1.266
1.175
.899
1.438
1.234
.600
.672
1.194
3.172
M25x1.5-6H
.936
20
8-32
.740
.625
1.438
2.344
1.290
1.516
1.301
1.024
1.656
1.360
.635
.747
1.322
3.610
M25x1.5-6H
1.180
22
8-32
.928
.750
1.625
2.344
1.418
1.516
1.430
1.149
1.656
1.484
.670
.846
1.449
3.766
M32x1.5-6H
1.180
24
8-32
.990
.800
1.719
2.406
1.543
1.578
1.555
1.274
1.717
1.610
.740
.894
1.576
3.985
M32x1.5-6H
1.180
All dimensions for reference only.
16
PT07 (MS3114)
SP07
jam nut receptacle
M
S
H
S
M
Z
N
J A
P
R
L
Recept. Front View
“P” Potting Boot
M
C
L
P
R
PT07A-XX-XXX (SR)
SP07A-XX-XXX (SR)
PT07E-XX-XXX (SR)
MS3114F-XX-XXX
J Flat
+.000
-.010
K
+.011
-.010
H
±.016
S
M
6
.625
.812
.348
.405
.125
8
.750
.938
.473
.530
.125
10
.875
1.062
.590
.655
12
1.062
1.250
.750
14
1.188
1.375
16
1.312
1.500
18
1.438
1.625
20
1.562
22
1.688
24
1.816
Z
D N
J A
P
L
PT07P-XX-XXX
MS3114P-XX-XXX
Receptacle Side View
A Dia.
+.001
-.005
Class “E”, MS/”E”
Min.
Max.
R Thread
Class 2A
UNEF
.696
.062
.125
.4375-28
.231
.568
.696
.604
.191
.696
.062
.125
.5625-24
.231
.568
.696
.729
.191
.125
.696
.062
.125
.6875-24
.231
.568
.696
.854
.191
.818
.125
.696
.062
.125
.8750-20
.231
.568
.696
.979
.191
.875
.942
.125
.696
.062
.125
1.0000-20
.231
.568
.696
1.104
.191
1.000
1.066
.125
.696
.062
.125
1.1250-18
.231
.568
.696
1.229
.191
1.125
1.191
.125
.696
.062
.125
1.2500-18
.231
.568
.696
1.354
.191
1.812
1.250
1.316
.156
.884
.062
.250
1.3750-18
.261
.630
.884
1.510
.221
1.938
1.375
1.441
.156
.884
.062
.250
1.5000-18
.261
.630
.884
1.635
.221
2.062
1.500
1.566
.156
.917
.062
.250
1.6250-18
.228
.660
.917
1.760
.188
Panel Thickness
Class “A” (SR), “E” (SR), “P” (SR), MS/”F”
C
Thread
K
GD H
To complete part number see how to order on page 25.
Shell
Size
P
Z
J A
PT07E-XX-XXX
SP07E-XX-XXX
MS3114E-XX-XXX
Shell
Size
R
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
“E” Open Wire Seal
R
“A” General Duty/
“C” Pressurized Receptacle
PT07A-XX-XXX
PT07C-XX-XXX
J A
TERMINATION ASSEMBLIES
M
Z
D Max.
G
H
L
Z
Max.
L
Max.
M
N
Max.
Z
±.040
Class “E” (SR)
C
Thread
M
D
Max.
G
Class “P”, MS/”P”
H
L
M
D
Max.
L +.010
-.026
M
N
Z
6
-
-
-
-
-
-
-
-
-
-
-
-
.202
.593
.696
.484
.191
8
6-32
.250
.125
.781
1.062
.696
6-32
.250
.125
.775
1.029
.696
.327
.593
.696
.608
.191
10
6-32
.312
.188
.844
1.062
.696
6-32
.312
.188
.837
1.029
.696
.444
.593
.696
.734
.191
12
6-32
.438
.312
.969
1.062
.696
6-32
.438
.312
.963
1.029
.696
.558
.593
.696
.858
.191
14
6-32
.562
.375
1.094
1.062
.696
6-32
.562
.375
1.087
1.029
.696
.683
.593
.696
.984
.191
16
6-32
.625
.500
1.156
1.188
.696
6-32
.625
.500
1.150
1.161
.696
.808
.593
.696
1.110
.191
18
8-32
.750
.625
1.406
1.188
.696
8-32
.750
.625
1.400
1.161
.696
.909
.593
.696
1.234
.191
20
8-32
.750
.625
1.406
1.250
.884
8-32
.750
.625
1.400
1.224
.884
1.034
.718
.884
1.360
.221
22
8-32
.938
.750
1.594
1.250
.884
8-32
.938
.750
1.587
1.224
.884
1.159
.718
.884
1.484
.221
24
8-32
1.000
.800
1.594
1.250
.917
8-32
1.000
.800
1.681
1.320
.917
1.284
.718
.917
1.610
.188
*Size 24 strain relief available in PT only
17
All dimensions for reference only.
PT08 E
SP08 E
G
90 degree plug
TERMINATION ASSEMBLIES
“E” Open Wire Seal, “E” (SR)
Strain Relief
“P” Potting Boot 75 degrees
L
L
E
A
B
PT08E-XX-XXX
SP08E-XX-XXX
PT08E-XX-XXX (SR)
SP08E-XX-XXX (SR)
H
PT08P-XX-XXX
SP08P-XX-XXX
D
K
C
To complete part number see how to order on page 25.
All lockwire holes are .044 Dia. Min.
Plug
Front
View
Shell
Size
G
Dia.
Max
Plug Side View
Class “E”, “E” (SR)
B
±.031
C
+.010
-.025
Class “P”
D
±.062
E
+.047
-.025
L
±.057
A
±.025
H
±.015
K
±.015
L
Max.
8
.796
.655
.169
.941
.339
1.786
.469
.312
.438
1.656
10
.921
.749
.170
1.191
.393
1.880
.547
.438
.562
1.781
12
1.046
.812
.264
1.191
.450
1.965
.625
.516
.688
1.843
14
1.171
.905
.310
1.254
.519
2.113
.734
.625
.781
1.953
16
1.297
1.030
.330
1.316
.583
2.315
.750
.656
.890
2.000
18
1.422
1.015
.444
1.562
.621
2.423
.781
.703
1.000
2.046
20
1.562
1.077
.510
1.625
.683
2.695
.859
.766
1.125
2.218
22
1.672
1.139
.515
1.719
.739
2.742
.906
.812
1.234
2.265
24
1.797
1.265
.656
1.751
.797
2.980
1.169
.918
1.374
2.624
All dimensions for reference only.
18
PT Connectors with
Printed Circuit Board Contacts
Box Mounting Receptacle (PT02)
with PCB Contacts
Order by applicable part number in chart below;
add insert arrangement number. Refer to insert availability
on pages 4-10.
■ (MMC) located within .0025 of (TP)
S
R
(TP)
L
PT
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
M
SP
.150 ± .005 Dia.
R S
(TP)
4 Holes
A
N
K
Shell
Size
Part Number*
PT02 with PCB
Contacts
6
8
Receptacle Front View
Z
Receptacle Side View
R
(TP)
S
+.011
-.010
A
+.001
-.005
K
+.021
-.010
L
Max.
M
+.031
-.000
N
Dia.
Max.
Z
+.040
-.050
71-570120-XXX
.469
.688
.348
.493
.825
.431
.323
.380
71-570121-XXX
.594
.812
.473
.493
.825
.431
.449
.380
10
71-570122-XXX
.719
.938
.590
.493
.825
.431
.573
.380
12
71-570123-XXX
.812
1.031
.750
.493
.825
.431
.699
.380
14
71-570124-XXX
.906
1.125
.875
.493
.825
.431
.823
.380
16
71-570125-XXX
.969
1.219
1.000
.493
.825
.431
.949
.380
18
71-570126-XXX
1.062
1.312
1.125
.493
.825
.431
1.073
.380
20
71-570127-XXX
1.156
1.438
1.250
.650
1.076
.556
1.199
.286
22
71-570128-XXX
1.250
1.562
1.375
.650
1.076
.556
1.323
.286
24
71-570129-XXX
1.375
1.688
1.500
.683
1.109
.589
1.449
.253
All dimensions for reference only.
M
S
H
Jam Nut Receptacle (PT07)
with PCB Contacts
All lockwire holes are .044 Dia. Min.
Order by applicable part number in chart below;
add insert arrangement number. Refer to insert availability
on pages 4-10.
S
J A
R
Receptacle Front View
Shell
Size
Part Number*
PT02 with PCB
Contacts
6
P
K
Receptacle Side View
P Panel
Thickness
H
+.017
-.016
S
±.010
A Dia.
+.001
-.005
J Flat
+.000
-.010
K
+.011
-.010
M
±.010
Min.
71-533720-XXX
.625
.812
.348
.405
.125
.696
.062
8
71-533721-XXX
.750
.938
.473
.530
.125
.696
.062
10
71-533722-XXX
.875
1.062
.590
.655
.125
.696
12
71-533723-XXX
1.062
1.250
.750
.818
.125
14
71-533724-XXX
1.188
1.375
.875
.942
.125
16
71-533725-XXX
1.312
1.500
1.000
1.066
18
71-533726-XXX
1.438
1.625
1.125
20
71-533727-XXX
1.562
1.812
22
71-533728-XXX
1.688
1.938
24
71-533729-XXX
1.816
2.062
All dimensions for reference only.
Z
Max.
R
Thread
Class 2A
Z
+.025
-.035
.125
.4375-28 UNEF
.376
.125
.5625-24 UNEF
.376
.062
.125
.6875-24 UNEF
.376
.696
.062
.125
.8750-20 UNEF
.376
.696
.062
.125
1.0000-20 UNEF
.376
.125
.696
.062
.125
1.1250-18 UNEF
.376
1.191
.125
.696
.062
.125
1.2500-18 UNEF
.376
1.250
1.316
.156
.884
.062
.250
1.3750-18 UNEF
.367
1.375
1.441
.156
.884
.062
.250
1.5000-18 UNEF
.367
1.500
1.556
.156
.917
.062
.250
1.6250-18 UNEF
.334
* For RoHS compliance connectors with PCB contacts change “71”- to:
“FL” designates conductive gray zinc nickel plating
“93” designates black zinc cobalt plating
19
PTB
SPB
thru bulkhead receptacle
L
S
R
M
PTB
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
SPB
.150 ± .005 Dia.
(TP)
R S
P
4 Holes
A
A
(TP)
K
* PTB-XX-XXX
* SPB-XX-XXX
* To complete part number add desired arrangement number (refer to pages 4 and 5 for insert
availability) and add “PS”;
Example: PTB-18-32PS. If a rotation is required, use PTB-18-32PS and add W, X, Y or Z. Example:
PTB-18-32 PSW.
The socket end of the insert always appears at the “P” dimension end of shell.
■(MMC) located within .0025 of (TP)
Receptacle Front View
Shell
Size
R
(TP)
Receptacle Side View
S
P
Max.
PTB
SPB
PTB
SPB
A
+.001
-.005
K
+.016
-.000
L
±.005
M
+.010
-.000
PTB
SPB
6
.469
.641
.688
.953
.348
.625
1.050
.562
.125
.188
8
.594
.734
.812
1.047
.473
.625
1.050
.562
.125
.188
10
.719
.812
.938
1.125
.590
.625
1.050
.562
.125
.188
12
.812
.938
1.031
1.250
.750
.625
1.050
.562
.125
.188
14
.906
1.031
1.125
1.344
.875
.625
1.050
.562
.125
.188
16
.969
1.125
1.219
1.438
1.000
.625
1.050
.562
.125
.188
18
1.062
1.203
1.312
1.516
1.125
.625
1.050
.562
.125
.188
20
1.156
1.297
1.438
1.672
1.250
.781
1.330
.688
.125
.312
22
1.250
1.375
1.562
1.750
1.375
.781
1.330
.688
.125
.312
24
1.375
1.500
1.688
1.875
1.500
.781
1.330
.688
.125
.312
All dimensions for reference only.
20
PT
hermetic
solder
mounting
receptacle
Three shell styles are available in the hermetic PT
bayonet series:
• PTIH (MS3113H)
• PT02H
• PT07H (MS3114H)
These hermetic connectors are only available with solder cup or
flat eyelet pin contacts in the MS/PT version. Socket contacts
are available in some proprietary PT versions. Other design
characteristics of the PT hermetic connector series are as
follows:
Shell sizes: 8 through 24 (tin plated)
Contact count: 2 through 61. Refer to pages 4 and 5 for insert
availability for hermetics.
Current: 5.0 amp each #20 contact
10 amp each #16 contact
17 amp each #12 contact
Contacts are tin plated for PT; gold is optional
box mounting
receptacle
Dielectric Withstanding Voltage (sea level):
1500 volts (RMS) 60 cps, Service Rating I
2300 volts (RMS) 60 cps, Service Rating II
Compression glass inserts, permanently lettered
Helium Leakage: Less than 1.0 X 10-6 cc/sec.
at 15 psi differential
Physical Shock: 100 G’s
Vibration:
Exceeds MIL-E-5272 Procedure II
Thermal Shock:
No deterioration or failure after 5 cycles
at –55°F to +257°F
Intermateability: Mates with MS3116 and PT06
Refer to pages 4-10 for insert arrangement availability.
jam nut
receptacle
21
PTIH (MS3113H)
hermetic solder mounting receptacle
L
G
W
A
N
.031 +.006
–.005
Z
* PTIH-XX-XXX
** PTIY-XX-XXX
** MS3113H-XXCXXX
† PTIH-XX-XXX (100)
†† PTIY-XX-XXX (100)
†† MS3113H-XXYXXX
To complete part number see how to order on page 25.
* Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
† Flat eyelet pin contacts without interfacial seal
†† Flat eyelet pin contacts with interfacial seal
Recept.
Front View
Shell Size
Receptacle Side View
G Dia.
Max.
A Dia.
+.001
-.005
L
+.025
-.016
N Dia.
+.001
-.005
W
+.001
-.010
Z
Max.
6
.511
.348
.447
.438
.094
.386
8
.636
.473
.447
.562
.094
.386
10
.761
.590
.447
.672
.094
.386
12
.855
.750
.447
.781
.094
.386
14
.980
.875
.447
.906
.094
.386
16
1.105
1.000
.447
1.031
.094
.386
18
1.229
1.125
.447
1.156
.094
.386
20
1.323
1.250
.509
1.250
.094
.386
22
1.449
1.375
.509
1.375
.125
.418
24
1.574
1.500
.542
1.500
.125
.418
All dimensions for reference only.
22
PT02H
hermetic box mounting receptacle
PT
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
S
R
(TP)
L
W
SP
.150 ± .005 Dia.
4 Holes
R S
(TP)
A
N
U
Z
* PT02H-XX-XXX
** PT02Y-XX-XXX
† PT02H-XX-XXX (100)
†† PT02Y-XX-XXX (100)
To complete part number see how to order on page 25.
* Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
† Flat eyelet pin contacts without interfacial seal
†† Flat eyelet pin contacts with interfacial seal
■ (MMC) located within .0025 of (TP)
Recept. Front View
Receptacle Side View
Shell Size
R
(TP)
S
±.016
A Dia.
+.001
-.005
K
±.015
L
+.025
-.015
N Dia.
+.001
-.005
U
+.011
-.010
Z
Max.
6
.469
.688
.348
.047
.494
.438
.062
.344
8
.594
.812
.473
.047
.494
.562
.062
.344
10
.719
.938
.590
.047
.494
.672
.062
.344
12
.812
1.031
.750
.047
.494
.781
.062
.344
14
.906
1.125
.875
.047
.494
.906
.062
.344
16
.969
1.219
1.000
.047
.494
1.031
.062
.344
18
1.062
1.312
1.125
.047
.494
1.156
.062
.344
20
1.156
1.438
1.250
.047
.556
1.250
.062
.344
22
1.250
1.562
1.375
.079
.556
1.375
.062
.377
24
1.375
1.688
1.500
.079
.588
1.500
.062
.377
All dimensions for reference only.
23
PT07H (MS3114H)
hermetic jam nut receptacle
S
H
M
Z
A
S
R
P
K
* PT07H-XX-XXX
** PT07Y-XX-XXX
** MS3114H-XXCXXX
† PT07H-XX-XXX (100)
†† PT07Y-XX-XXX (100)
†† MS3114H-XXYXXX
To complete part number see how to order on page 25.
* Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
† Flat eyelet pin contacts without interfacial seal
†† Flat eyelet pin contacts with interfacial seal
Recept. Front View
Shell
Size
Receptacle Side View
S
±.016
H Hex
+.017
-.016
A
+.001
-.005
K
+.043
-.016
M
+.031
-.000
P Panel Thickness
Min.
R
Thread
Class 2A
Max.
Z Max.
6
.812
.625
.348
.094
.696
8
.938
.750
.473
.094
.696
.125
.062
.4375-28 UNEF
.206
.125
.062
.5625-24 NEF
.206
10
1.062
.875
.590
.094
12
1.250
1.062
.750
.094
.696
.125
.062
.6875-24 NEF
.206
.696
.125
.062
.8750-20 UNEF
.206
14
1.375
1.188
.875
16
1.500
1.312
1.000
.094
.696
.125
.062
1.0000-20 UNEF
.206
.094
.696
.125
.062
1.1250-18 NEF
.206
18
1.625
1.438
20
1.812
1.562
1.125
.094
.696
.125
.062
1.2500-18 NEF
.206
1.250
.125
.884
.250
.062
1.3750-18 NEF
22
1.938
.081
1.688
1.375
.125
.884
.250
.062
1.5000-18 NEF
.081
24
2.062
1.812
1.500
.125
.917
.250
.062
1.6250-18 NEF
.048
All dimensions for reference only.
24
PT, SP, MS/PT
how to order
PT,SP
Ex: PT00A-20-41PW003
1.
2.
3.
4.
5.
6.
7.
8.
Contact Configuration
Insert Rotation
Finish
P
W
003
Connector Type
Shell Style
Service Class
Shell Size
Insert
Arrangement
PT
00
A
20
41
3. Service Class
1. Connector Type
PT
SP
PTG
standard olive drab, electrically conductive cadmium
plate bayonet lock connector with solder contacts
electrically non-conductive, hard anodic coated bayonet lock connector with solder contacts and larger
flange and mounting holes for back panel mounting
plug with grounding fingers
No letter is required for normal position
General duty back shell
C
Pressurized receptacle
E
Environmental resisting open wire seal with grommet and nut
P
Assembly with potting boot
PG
2. Shell Style
7. Insert Rotation
A
W
H
Hermetic* without interfacial seal
Y
Hermetic* with interfacial seal
01
Cable connecting receptacle
02
Box mounting receptacle
4. Shell Size
06
Straight plug
Shell sizes 6 - 24 available
07
Jam nut receptacle
08
90 degree plug cable support
5. Insert Arrangement
B
thru bulkhead receptacle (pressurized)
I
Solder mount receptacle (Hermetic only)
Refer to pages 4-10 for insert availability
(Use only the number following the hyphen)
Designates a strain relief clamp
Indicate optional finishes as follows:
100
P
Pin contacts
S
Socket contacts
Suffix added for flat eyelet pin contacts in hermetic
versions
OR
6. Contact Configuration
For ordering connectors with printed circuit board
contacts, see pg. 19.
MS/PT
MIL-DTL-26482, Series 1
Ex: MS3110E20-41PW
005
* Anodic coating - Alumilite® (standard on “SP”)
023
* Electroless nickel
025
Black zinc cobalt plating
072
* Conductive gray zinc nickel plating
424
* Electroless nickel finish with strain relief
470
Black zinc cobalt plating with strain relief
725
Gray zinc nickel plating with strain relief
* RoHS Compliant finish
Note: Olive drab cadmium is the default plating. If required on SP
type use suffix (003).
1.
2.
Connector Type
Specification
Number
Shell Style
Service Class
MS
311
0
E
1. Connector Type
Military standard
2. Specification Number
Basic family number for
MIL-DTL-26482, Series 1 solder type
3. Shell Style
0
8. Finish
SR
Wall mounting receptacle
311
Refer to page 6
Y
Z
Adapter for cable glad for moisture proofing
jacketed cables
00
MS
X
3.
4.
5.
6.
7.
8.
Shell Size
Insert Arrangment
Contact
Configuration
Insert Rotation
20
41
P
W
4. Service Class
7. Contact Configuration
E
Environmental resisting connector
P
Pin contacts
F
Environmental resisting connectors
with strain relief
S
Socket contacts
J
Clamp assembly for moisture proofing
multi-jacketed cables, with strain relief
P
Potted type with potting boot
H
Hermetic
Cable connecting receptacle
2
Box mounting receptacle
3
Solder mount receptacle (Hermetic only)
4
Jam nut receptacle
6
Straight plug
8. Insert Rotation
No letter is required for normal position
Wall mounting receptacle
1
For ordering connectors with printed circuit board
contacts, see pg. 19.
W
5. Shell Size
Shell sizes 8 - 24 available
X
Y
Refer to page 6
Z
6. Insert Arrangement
Refer to pages 4-10 for insert availability
(Use only the number following the hyphen)
Hermetic Version:
In this version a letter replaces the hyphen between the
Shell Size and Insert Arrangement (Steps 5 and 6)
Y
Flat eyelet pin contacts
C
Solder cup pin contacts
25
* Hermetic connectors are supplied with tin plated shells.
** This connector style is sometimes referred to as a cable
connecting “plug”. It does, however, mate with either a
straight or 90 degree plug.
Amphenol PT-SE, SP-SE, MS/PT-SE
Proprietary/MIL-DTL-26482, Series 1
bayonet coupling and crimp termination
wall mounting
receptacle
Amphenol® SE crimp type miniature connectors provide
performance and versatility needed for applications
demanding high reliability and crimp removable contacts.
These crimp contacts are rear insertable/front release and
are held in position by an MS approved spring tower
retention system.
The MS/PT-SE Series is qualified to MIL-DTL-26482, Series 1 and has all the
outstanding design characteristics and quality of the PT Series.
cable
connecting
receptacle*
box mounting
receptacle
The SP-SE Series is a modification of the PT-SE, providing special shells with a
wide mounting flange for back panel mounting.
A corrosion resistant electrically conductive finish of cadmium plate with an
olive drab chromate after-treatment is used on the PT-SE and MS/PT-SE. The
SP-SE is given a durable non-conductive hard anodic “Alumilite”® coating
which provides abrasion protection and resistance to corrosion.
500 hour corrosion resistance, RoHS compliant harsh environment conductive
plating. Gray Zinc over an Electroless Nickel (Gray ZnNi) base, with a Light Gun
Metal Gray appearance.
Shell components for these series are aluminum. The dependable 5 key/
keyway polarization with bayonet lock coupling assures positive mating with
no chance of cross plugging. Spring tension provided by a wave washer in the
coupling nut
ensures maintenance of interfacial seal between mating halves.
straight plug
Both the insert and main joint gasket are molded from resilient neoprene.
This provides excellent moisture sealing at the gasket and superior electrical
isolation of the contact in the insert.
Both pins and sockets are machined from a copper alloy and are gold plated.
This gold plating eliminates contact corrosion and offers an indefinite shelf
life. Socket contacts for these series are closed entry design.
jam nut
receptacle
Breakaway style plug is available in PT-SE crimp.
The PT-SE, SP-SE and MS/PT-SE Series are intermateable and intermountable
with all existing Miniature Cylindrical Series connectors.
Refer to pages 4-10 for insert arrangement availability.
* This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
26
PT-SE, SP-SE, MS/PT-SE
Contact Specifications
Contact Size
Test Current
Maximum
Millivolt Drop†
Crimp Well
Diameter
Minimum Well
Depth
20
7.5
55
.049±.001
.267
16
13.0
49
.067±.001
.236
12
23.0
42
.100±.002
.236
“SE”,
MS / “E”
open wire seal
Service Rating
Service
Rating
Recommended
Operating AC
Voltage at Sea
Level
Test Voltage AC (RMS), 60 cps
Sea Level
50,000 ft.
70,000 ft.
110,000 ft.
I
600
1,500
500
375
200
II
1,000
2,300
750
500
200
† Silver plated wire per MIL-DTL-26482
PT-SE and SP-SE Service Classes
PT-SE and SP-SE connectors are available in the three
service classes listed below.
“SE” (SR),
MS / “F”
strain relief
clamp
“SE”
Open wire sealing - environmental resistant,
with a nut and grommet for moisture proofing
individual wires
“SE (SR)“ Strain relief clamp - environmental resistant
strain relief clamp and grommet for moisture
proofing individual wires; provides added
wire bundle support
“SP”
Translucent nylon boot for retaining customer
applied potting compounds; held in place by
a threaded ring
MS/PT-SE Service Classes
MS-SE series connectors are available in the following
certified service classes:
“E”
“F”
“P”
Open wire sealing - environmental resisting
connectors are supplied with a multi-hole
grommet and clamping nut for moisture
proofing individual open wires
Environmental resistant strain relief clamp
and grommet for moisture proofing individual
wires; provides added wire bundle support
Potting applications - these connectors are
supplied with a translucent nylon boot for retention
of customer applied potting compound
27
“SP”,
MS / “P”
potting boot
PT00 SE (MS3120)
SP00 SE
wall mounting receptacle
S
R
T Dia.
4 Holes
(TP)
R S
(TP)
TERMINATION ASSEMBLIES
“SE” (SR), MS / “F” Strain Relief
“SE” Open Wire Seal
“SP” Potting Boot
L
N
A
K
M
PT00SE-XX-XXX
SP00SE-XX-XXX
MS3120E-XX-XXX
PT00SE-XX-XXX (SR)
SP00SE-XX-XXX (SR)
MS3120F-XX-XXX
PT00SP-XX-XXX
SP00SP-XX-XXX
To complete part number see how to order on page 36.
■(MMC) located within .005 of (TP)
Receptacle Front View
Shell
Size
R
(TP)
PT
Receptacle Side View
S
Max.
SP
PT
T Dia.
±.005
SP
PT
SP
A Dia.
+.001
-.005
K
±.016
M
+.010
-.000
PT
P*
Panel Thickness
SP
PT
SP
8
.594
-
.828
-
.120
-
.473
.062
.431
-
.094
-
10
.719
.812
.954
1.141
.120
.150
.590
.062
.431
.462
.094
.125
12
.812
.938
1.047
1.226
.120
.150
.750
.062
.431
.462
.094
.125
14
.906
1.031
1.141
1.360
.120
.150
.875
.062
.431
.462
.094
.125
16
.969
1.125
1.234
1.453
.120
.150
1.000
.062
.431
.462
.094
.125
18
1.062
1.203
1.328
1.532
.120
.150
1.125
.062
.431
.462
.094
.125
20
1.156
1.297
1.453
1.688
.120
.150
1.250
.094
.556
.556
.219
.219
22
1.250
1.375
1.578
1.766
.120
.150
1.375
.094
.556
.556
.219
.219
24
1.375
1.500
1.703
1.891
.147
.150
1.500
.094
.589
.589
.219
.219
Shell
Size
Class “SE”, MS/”E”
Class “SE”(SR), MS/”F”
Class “SP”, MS/”P”
L
Max.
N Dia.
Max
G
Dia.
L
Max.
N
Max.
D Dia.
Max.
L
Max.
N Dia.
Max.
8
1.328
.560
.125
2.422
.781
-
-
-
10
1.328
.704
.188
2.422
.844
.444
1.656
.734
12
1.328
.825
.312
2.422
.969
.558
1.656
.858
14
1.328
.954
.375
2.422
1.094
.683
1.656
.984
16
1.328
1.080
.500
2.537
1.156
.808
1.656
1.110
18
1.328
1.204
.625
2.537
1.406
.909
1.656
1.234
20
1.359
1.330
.625
2.824
1.406
1.034
1.750
1.360
22
1.359
1.454
.750
2.824
1.594
1.159
1.750
1.484
24
1.422
1.580
.800
2.900
1.688
1.284
1.782
1.610
* Back panel mounting
All dimensions for reference only.
28
MF00 SE (MS3128)
wall mounting receptacle
T1 Dia.
4 Holes
S
R1
(TP)
R
(TP)
R R1
(TP) (TP) S
T Dia.
4 Holes
“SE” Open Wire Seal
MS / “F” Strain Relief
TERMINATION ASSEMBLIES
L
N
A
M
K
MF00SE-XX-XXX (SR)
MS3128F-XX-XXX
MF00SE-XX-XXX
MS3128E-XX-XXX
Receptacle Front View
Shell
Size
R
R1
S
Max.
T Dia.
±.005
Receptacle Side View
T1 Dia.
±.005
A Dia.
+.001
-.000
K
±.016
M
+.010
-.000
Class MS/ ”E”
L
Max.
N
Max.
Class MS/ “F”
F
Min.
G
Dia.
L
Max.
N
Max.
10
.719
.812
1.141
.120
.150
.590
.062
.462
1.328
.685
.297
.188
1.906
.891
12
.812
.938
1.266
.120
.150
.750
.062
.462
1.328
.813
.422
.312
1.906
1.016
14
.906
1.031
1.360
.120
.150
.875
.062
.462
1.328
.930
.547
.375
1.906
1.141
16
.969
1.125
1.453
.120
.150
1.000
.062
.462
1.328
1.057
.609
.500
2.000
1.203
18
1.062
1.203
1.532
.120
.150
1.125
.062
.462
1.28
1.175
.734
.625
2.000
1.469
20
1.156
1.297
1.688
.120
.150
1.250
.094
.556
1.359
1.301
.734
.625
2.172
1.469
22
1.250
1.375
1.766
.120
.150
1.375
.094
.556
1.359
1.428
.922
.750
2.172
1.656
24
1.375
1.500
1.891
.147
.150
1.500
.094
.589
1.422
1.533
.984
.800
2.234
1.750
All dimensions for reference only.
29
PT01 SE (MS3121)
SP01 SE
cable connecting receptacle
S
S
TERMINATION ASSEMBLIES
“SE” (SR), MS / “F” Strain Relief
“SE” Open Wire Seal
“SP”, MS / “P” Potting Boot
L
L
D N
A
N
A
K
K
PT01SE-XX-XXX
SP01SE-XX-XXX
MS3121E-XX-XXX
K
PT01SE-XX-XXX (SR)
SP01SE-XX-XXX (SR)
MS3121F-XX-XXX
PT01SP-XX-XXX
SP01SP-XX-XXX
MS3121P-XX-XXX
Note: This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
To complete part number see how to order on page 36.
Receptacle
Front View
Shell
Size
Receptacle Side View
Class “SE”, MS/ ”E”
Class “SE” (SR), MS/”F”
Class “SP”, MS/”P”
S
Max.
A Dia.
+.001
-.005
K
±.018
L
Max.
N Dia.
Max.
G Dia.
L Max.
N
Max.
D Dia.
L
Max.
N Dia.
Max.
.832
.473
.094
1.522
.560
.125
2.422
.828
-
-
-
10
.975
.590
.094
1.522
.685
.188
2.422
.891
.444
1.656
.734
12
1.068
.750
.094
1.522
.813
.312
2.422
1.016
.558
1.656
.858
14
1.162
.875
.094
1.522
.930
.375
2.422
1.141
.683
1.656
.984
16
1.256
1.000
.094
1.522
1.057
.500
2.537
1.203
.808
1.656
1.110
18
1.349
1.125
.094
1.522
1.175
.625
2.537
1.469
.909
1.656
1.234
20
1.475
1.250
.115
1.709
1.301
.625
2.824
1.469
1.034
1.750
1.360
22
1.599
1.375
.115
1.709
1.428
.750
2.824
1.656
1.159
1.750
1.484
24
1.729
1.500
.115
1.709
1.555
.800
2.900
1.750
1.284
1.782
1.610
8
All dimensions for reference only.
30
PT02 SE (MS3122)
SP02 SE
box mounting receptacle
S
L
R
M
(TP)
R
S
(TP)
K
A
N
T Dia.
4 Holes
D
PT02SE-XX-XXX
SP02SE-XX-XXX
MS3122E-XX-XXX
To complete part number see how to order on page 36.
■ (MMC) located within .0025 of (TP)
Receptacle Front View
Shell
Size
Receptacle Side View
T
Dia.
±.005
S
Max.
R
PT
SP
PT
SP
PT
SP
A
Dia.
+.001
-.005
D
Max.
PT
K
±.025
M
+.010
-.000
L
Max.
SP
PT
SP
N
Dia.
+.011
-.000
8
.594
-
.828
-
.120
-
.473
.312
-
.062
1.358
.431
-
.438
10
.719
.812
.954
1.141
.120
.150
.590
.312
.219
.062
1.296
.431
.462
.562
12
.812
.938
1.047
1.266
.120
.150
.750
.312
.219
.062
1.296
.431
.462
.688
14
.906
1.031
1.141
1.360
.120
.150
.875
.312
.219
.062
1.296
.431
.462
.812
16
.969
1.125
1.234
1.453
.120
.150
1.000
.312
.219
.062
1.296
.431
.462
.938
18
1.062
1.203
1.328
1.532
.120
.150
1.125
.312
.219
.062
1.296
.431
.462
1.062
20
1.156
1.297
1.453
1.688
.120
.150
1.250
.406
.344
.094
1.358
.556
.556
1.188
22
1.250
1.375
1.578
1.766
.120
.150
1.375
.406
.344
.094
1.358
.556
.556
1.312
24
1.375
1.500
1.703
1.891
.147
.150
1.500
.406
.344
.094
1.358
.589
.589
1.438
All dimensions for reference only.
31
MF02 SE (MS3127)
box mounting receptacle
T1 Dia.
4 Holes
S
R1
L
(TP)
M
R
(TP)
R R1
(TP) (TP) S
K
A
T Dia.
4 Holes
N
D
MF02SE-XX-XXX
MS3127E-XX-XXX
To complete part number see how to order on page 36.
■ (MMC) located within .0025 of (TP)
Receptacle Front View
Receptacle Side View
Shell
Size
N
Dia.
+.011
-.000
R
R1
S
Max.
T
±.005
T1
±.005
A
Dia.
+.001
-.005
D
Max.
K
±.016
L
Max.
M
+.010
-.000
10
.562
.719
.812
1.141
.120
.150
.590
.219
.062
1.266
.462
12
.688
.812
.938
1.266
.120
.150
.750
.219
.062
1.266
.462
14
.812
.906
1.031
1.360
.120
.150
.875
.219
.062
1.266
.462
16
.938
.969
1.125
1.453
.120
.150
1.000
.219
.062
1.266
.462
18
1.062
1.062
1.203
1.532
.120
.150
1.125
.219
.062
1.266
.462
20
1.188
1.156
1.297
1.688
.120
.150
1.250
.344
.094
1.328
.556
22
1.312
1.250
1.375
1.766
.120
.150
1.375
.344
.094
1.328
.556
24
1.438
1.375
1.500
1.891
.147
.150
1.500
.344
.094
1.328
.589
All dimensions for reference only.
32
PT06 SE (MS3126)
SP06 SE
straight plug
S
TERMINATION ASSEMBLIES
“SE” (SR), MS / “F” Strain Relief
“SE”, MS / “E” Open Wire Seal
L
“SP”, MS / “P” Potting Boot
L
L
N
G N
Z pin contacts
Z1 socket contacts
D N
Z pin contacts
Z1 socket contacts
PT06SE-XX-XXX
SP06SE-XX-XXX
PTG06SE-XX-XXX
MS3126E-XX-XXX
Z pin contacts
Z1 socket contacts
PT06SE-XX-XXX (SR)
SP06SE-XX-XXX (SR)
PTG06SE-XX-XXX (SR)
MS3126F-XX-XXX
PT06SP-XX-XXX
SP06SP-XX-XXX
PTG06SP-XX-XXX
MS3126P-XX-XXX
To complete part number see how to order on page 36.
Plug Front View
Shell Size
Plug Side View
S Dia.
Max.
Z
±.045
Z1
±.045
Class “SE”, MS/”E”
Class “SE” (SR), MS/”F”
L Max.
N Max.
G
Dia.
Class “SP”, MS/”P”
L
Max.
N
Max.
D
Dia.
L
Max.
N Dia.
Max.
8*
.734
.640
.579
1.328
.540
.125
2.413
.828
.327
1.750
.578
10
.859
.640
.579
1.328
.685
.188
2.413
.891
.444
1.750
.734
12
1.031
.640
.579
1.328
.813
.312
2.413
1.016
.558
1.750
.858
14
1.156
.640
.579
1.328
.930
.375
2.413
1.141
.683
1.750
.984
16
1.281
.640
.579
1.328
1.057
.500
2.528
1.203
.808
1.750
1.110
18
1.391
.640
.579
1.328
1.175
.625
2.528
1.469
.909
1.750
1.234
20
1.531
.640
.579
1.297
1.301
.625
2.753
1.469
1.034
1.750
1.360
22
1.656
.640
.579
1.297
1.428
.750
2.753
1.656
1.159
1.750
1.484
24
1.777
.640
* PT-SE, MS-SE and MS-SP only.
All dimensions for reference only.
.579
1.359
1.533
.800
2.830
1.750
1.284
1.766
1.610
33
PT07 SE (MS3124)
SP07 SE
S
H
jam nut receptacle
S
TERMINATION ASSEMBLIES
“SE” (SR), MS / “F” Strain Relief
“SE”, MS / “E” Open Wire Seal
L
“SP”, MS / “P” Potting Boot
L
L
M
M
M
K
R
K
K
N
J A
F N
J A
G N
J A
R
P
P
PT07SE-XX-XXX
SP07SE-XX-XXX
MS3124E-XX-XXX
R
P
PT07SE-XX-XXX (SR)
SP07SE-XX-XXX (SR)
MS3124F-XX-XXX
PT07SP-XX-XXX
SP07SP-XX-XXX
MS3124P-XX-XXX
To complete part number see how to order on page 36.
All lockwire holes are .044 Dia. Min.
Receptacle Front View
Shell Size
H Hex
Max.
S
Max.
Receptacle Side View
A Dia.
+.001
-.005
J Flat
+.000
-.010
K
+.011
-.010
M
±.005
P
Panel Thickness
Min.
R
Thread
Class 2A
Max.
8
.767
.954
.473
.530
.125
.696
.062
.125
.5625-24 UNEF
10
.892
1.078
.590
.655
.125
.696
.062
.125
.6875-24 NEF
12
1.079
1.266
.750
.818
.125
.696
.062
.125
.8750-20 UNEF
14
1.205
1.391
.875
.942
.125
.696
.062
.125
1.0000-20 UNEF
16
1.329
1.516
1.000
1.066
.125
.696
.062
.125
1.1250-18 NEF
18
1.455
1.641
1.125
1.191
.125
.696
.062
.125
1.2500-18 NEF
20
1.579
1.828
1.250
1.316
.156
.884
.062
.250
1.3750-18 NEF
22
1.705
1.954
1.375
1.441
.156
.884
.062
.250
1.5000-18 NEF
24
1.829
2.078
1.500
1.556
.156
.917
.062
.250
1.6250-18 NEF
Class “SE”, MS/”E”
Class “SE” (SR), MS/”F”
Class “SP”, MS/”P”
Shell Size
L
Max.
N
Max.
F
Min.
G Dia.
Free
L
Max.
N
Max.
G
Dia.
L
Max.
N Dia.
Max.
8
1.438
.749
.234
.125
1.922
.828
-
-
-
10
1.438
.874
.297
.188
1.922
.891
.444
1.656
.734
12
1.438
.999
.422
.312
1.922
1.016
.558
1.656
.858
14
1.438
1.124
.547
.375
1.922
1.141
.683
1.656
.984
16
1.438
1.249
.609
.500
2.000
1.203
.808
1.656
1.110
18
1.438
1.374
.734
.625
2.000
1.469
.909
1.656
1.234
20
1.625
1.530
.734
.625
2.172
1.469
1.034
1.922
1.360
22
1.625
1.655
.922
.750
2.172
1.656
1.159
1.922
1.484
24
1.688
1.780
.984
.800
2..234
1.750
1.284
1.951
1.610
All dimensions for reference only.
34
PT08 SE
SP08 SE
90 degree plug
G
“SE” Open Wire Seal, “SE” (SR) Strain Relief
TERMINATION ASSEMBLIES
“SP” Potting Boot 75 degrees
L
L
E
A
B
PT08SE-XX-XXX
SP08SE-XX-XXX
PT08SE-XX-XXX (SR)
SP08SE-XX-XXX (SR)
H
PT08SP-XX-XXX
SP08SP-XX-XXX
D
K
C
To complete part number see how to order on page 36.
All lockwire holes are .044 Dia. Min.
Plug Front View
Plug Side View
Shell Size
G Dia.
Max.
B
±.031
C
+.010
-.025
D
±.062
E
+.047
-.025
L
Max.
A
±.025
H
±.015
K
±.015
L
Max.
10
.921
.749
.170
1.191
.393
2.137
.547
.438
.562
2.031
12
1.046
.812
.264
1.191
.450
2.222
.625
.516
.688
2.093
14
1.171
.905
.310
1.254
.519
2.370
.734
.625
.781
2.203
16
1.297
1.030
.330
1.316
.583
2.572
.750
.656
.890
2.250
18
1.422
1.015
.444
1.562
.621
2.680
.781
.703
1.000
2.296
20
1.562
1.077
.510
1.625
.683
2.753
.859
.766
1.125
2.343
22
1.672
1.139
.515
1.719
.739
2.799
.906
.812
1.234
2.390
24
1.797
1.250
.656
1.750
.787
3.037
1.181
.918
1.374
2.624
All dimensions for reference only.
35
PT-SE, SP-SE, MS/PT-SE
how to order
PT-SE, SP-SE
Ex: PT00SE-20-41PW003
1.
2.
3.
4.
5.
6.
7.
8.
Contact Configuration
Insert Rotation
Finish
P
W
003
Connector Type
Shell Style
Service Class
Shell Size
Insert
Arrangement
PT
00
SE
20
41
1. Connector Type
PT
standard olive drab, electrically conductive cadmium
plate bayonet lock connector with solder contacts
MF
standard olive drab, electrically conductive cadmium
plated, bayonet lock connector with dual mounting
holes, and
crimp contacts
SP
electrically non-conductive, hard anodic coated bayonet lock connector with solder contacts and larger
flange and mounting holes for back panel mounting
3. Service Class
7. Insert Rotation
SE
Environmental crimp
No letter is required for normal position
SP
potted type crimp
W
Both of the above are Amphenol proprietary versions of the
MILDTL-26482, Series 1 crimp contact connector and offer
15 lbs. contact retention for size 20 contacts; 25 lbs. for size
16 contacts.
2. Shell Style
Z
PG
SQ
Braided shield termination
8. Finish
Heatshrink termination
SR
G
Wall mounting receptacle
01
Cable connecting receptacle
4. Shell Size
02
Box mounting receptacle
Shell sizes 8 - 24 available
06
Straight plug
07
Jam nut receptacle
5. Insert Arrangement
08
90 degree plug
Refer to pages 4-10 for insert availability
(Use only the number following the hyphen)
Designates a strain relief clamp
Indicate optional finishes as follows:
100
P
Pin contacts
S
Socket contacts
Suffix added for flat eyelet pin contacts in hermetic
versions
OR
6. Contact Configuration
005
* Anodic coating - Alumilite® (standard on “SP”)
023
* Electroless nickel
025
Black zinc cobalt plating
072
* Conductive gray zinc nickel plating
424
* Electroless nickel finish with strain relief
470
Black zinc cobalt plating with strain relief
725
Gray zinc nickel plating with strain relief
* RoHS Compliant finish
MS/PT-SE
MIL-DTL-26482, Series 1
Ex: MS3120E20-41PW
Note: Olive drab cadmium is the default plating. If required on SP
type use suffix (003).
1.
2.
Connector Type
Specification
Number
Shell Style
Service Class
MS
311
0
E
3.
1. Connector Type
Military standard
2. Specification Number
312
Refer to page 6
Y
adapter for cable gland for moisture proofing
jacketed cables
00
MS
X
basic family for MIL-DTL-26482, Series 1 crimp type
3. Shell Style
0
Wall mounting receptacle
1
Cable connecting receptacle*
2
Box mounting receptacle
4
Jam nut receptacle
6
Straight plug
7
box mounting receptacle with dual mounting holes
8
wall mounting receptacle with dual mounting holes
4.
5.
6.
7.
8.
Shell Size
Insert Arrangement
Contact
Configuration
Insert Rotation
20
41
P
W
4. Service Class
7. Contact Configuration
E
Environmental resisting connector
P
Pin contacts
F
Environmental resisting connectors with strain relief
S
Socket contacts
P
Potted type with potting boot
SQ
G
Braided shield termination
8. Insert Rotation
Heatshrink termination
No letter is required for normal position
W
X
5. Shell Size
Y
Shell sizes 8 - 24 available
6. Insert Arrangement
Refer to pages 4-10 for insert availability
(Use only the number following the hyphen)
36
Refer to page 6
Z
* This connector style is sometimes referred to as a cable
connecting “plug”. It does, however, mate with either a
straight or 90 degree plug.
PT & SP
accessories – sealing plugs, flange gaskets,
potting boots
SEALING PLUGS- FOR PT & SP
C
B
DIA
.135 +.030
–.025
A
DIA
Contact
Size
Amphenol®
Part Number
MS
Number
A
Dia.
±.010
B
Dia.
±.005
C
±.010
Color
Code
12
10-405996-12
MS27488-12
.121
.171
.564
Yellow
16
10-405996-16
MS27488-16
.083
.133
.564
Blue
20
10-405996-16
MS27488-20
.060
.090
.564
Red
How to Order: Order by 10- (Proprietary) or MS part number as shown in chart
above.
SEALING PLUG
MS27488-XX
10-405996-XX
MOUNTING FLANGE GASKETS – FOR PT & SP
PT
10-101949
.130 DIA SIZE 6 TO 22
.156 DIA SIZE 24
.160 DIA 10-150949
Shell Size
T
MOUNTING FLANGE GASKET
10-101949-XX
10-150949-XX
PT & SP
10-101949
10-150949
SP
10-150949
R
±.010
S
±.010
R
±.010
S
±.010
F
+.016
-.000
T
±.008
6
.469
.688
.641
.953
.375
.024
8
.594
.812
.734
1.047
.500
.024
10
.719
.938
.812
1.125
.625
.024
12
.813
1.031
.938
1.250
.750
.024
14
.906
1.125
1.031
1.344
.875
.024
16
.969
1.219
1.125
1.438
1.000
.024
18
1.063
1.312
1.203
1.516
1.125
.024
20
1.156
1.438
1.297
1.672
1.250
.024
22
1.250
1.563
1.375
1.750
1.375
.024
24
1.375
1.688
1.500
1.875
1.500
.024
How to Order: For PT: 10-101949-XX (complete order number with desired shell size).
For SP: 10-150949-XX (complete order number with desired shell size).
75° POTTING BOOTS – FOR PT & SP
B
E
15º
REF
D
L
75° POTTING BOOT
10-101988-XX
Shell
Size
B
Max.
D
±.015
E
±.015
L
Max.
8
.433
.312
.438
.766
10
.493
.438
.562
.830
12
.552
.516
.688
.861
14
.643
.625
.781
.916
16
.658
.656
.890
.936
18
.689
.703
1.000
.959
20
.750
.766
1.125
1.052
22
.794
.812
1.234
1.073
24
1.070
.918
1.374
1.310
How to Order: 10-101988-XX (complete order number with desired shell size).
All dimensions for reference only
37
PT & SP
CLASS “E” STRAIN RELIEF CLAMP – FOR PT & SP
accessories – clamps
L
B
D G
Shell
Size
B
Max.
C Thread
Class 2B
D
Min.
G
Max.
L
Max.
8
.550
6-32 NC
.240
.812
.930
10
.675
6-32 NC
.302
.875
.930
12
.803
6-32 NC
.428
1.000
.930
14
.920
6-32 NC
.552
1.125
.930
16
1.047
6-32 NC
.615
1.188
1.062
18
1.165
8-32 NC
.740
1.438
1.062
20
1.291
8-32 NC
.740
1.438
1.093
22
1.418
8-32 NC
.928
1.719
1.093
24
1.533
8-32 NC
.928
1.719
1.093
How to Order:
C
10-101971-XX X
Add desired
Add desired finish suffix†
shell size
“3” designates olive drab cadmium
“5’ designates Alumilite®
Not for use with jam nut style connectors
CLASS “E” STRAIN RELIEF CLAMP
10-101971-XX
CLASSES “A” & “P” STRAIN RELIEF CLAMP – FOR PT & SP
L
B
D G
Shell
Size
B
Max.
C Thread
Class 2B
D
Min.
G
Max.
L
+.010
-.020
8
.540
6-32 NC
.240
.812
.843
10
.665
6-32 NC
.302
.875
.843
12
.793
6-32 NC
.428
1.000
.843
14
.910
6-32 NC
.552
1.125
.843
16
1.037
6-32 NC
.614
1.188
.975
18
1.155
8-32 NC
.740
1.438
.975
20
1.281
8-32 NC
.740
1.438
1.007
22
1.408
8-32 NC
.928
1.719
1.007
24
1.533
8-32 NC
.938
1.719
1.007
How to Order:
C
10-101980-XX X
Add desired
Add desired finish suffix†
shell size
“3” designates olive drab cadmium
“5’ designates Alumilite®
Not for use with jam nut style connectors
CLASSES “A” & “P” STRAIN
RELIEF CLAMP
10-101980-XX
CLASS “A” CABLE CLAMPS – FOR PT & SP
V Thread
B
Shell
Size
Amphenol®
Part Number
A
±.031
B
Max.
C
Dia. Min.
V
Thread
10
97-3057-1004
.795
.842
.3125
.6250-24
12
97-3057-1007
.850
.995
.4375
.7500-20
14
97-3057-1008
.920
1.120
.5625
.8750-20
16
97-3057-1010
.920
1.216
.6250
1.0000-20
18/20
97-3057-1012
.927
1.403
.7500
1.1875-18
22/24
97-3057-1016
1.015
1.683
.9375
1.4375-18
How to Order: Order by 97-3057-XXXX number listed above. Standard finish is olive
drab zinc alloy. Consult Amphenol, Sidney, NY for alternate finishes.
† Standard accessory finishes are “3” olive drab cadmium for PT and MS/PT types,
“5” Alumilite® for SP types. Electroless nickel plating is also available on some
items; consult Amphenol, Sidney, NY
C
A
All dimensions for reference only.
CLASS “A” CABLE CLAMP
97-3057-XXXX
38
PT, SP, MS/PT
accessories – protection caps
RECEPTACLE PROTECTION CAPS – FOR PT, SP, MS/PT
PLUG PROTECTION CAPS – FOR PT, SP, MS/PT
C
B
.140 +.010
–.005
DIA
FOR SIZE 24
L
L
+.010
G
.140
X
X
RECEPTACLE PROTECTION CAP
FOR PT, SP, MS/PT CONNECTORS
10-101960-XXX
MS3181-XXX
(Wall Receptacle)
.125 +.010
–.005
DIA
FOR SIZE 6-22
N
10-101961-XXX
(Cable Connecting
Receptacle)
PLUG PROTECTION CAP
FOR PT, SP, MS/PT CONNECTORS
10-101964-XXX
MS3181-XXX
(Jam Nut Recptacle)
MS3180-XXX
10-101957-XXX
Shell
Size
B Dia.
+.010
-.000
C Dia.
+.010
-.000
G
Dia.
Max.
L
+.020
-.000
X
Std. & MS
RA, CA, NA
X
MS only
RAL/CAL/NAL
Shell
Size
N Dia.
+.001
-.005
L Dia.
+.025
-.015
X
Std. & MS
CA, RA
X
MS only
CAL/ RAL
6
.328
.454
.577
.563
3.000
5.000
6
.348
.532
3.000
5.000
8
.454
.578
.706
.563
3.000
5.000
8
.473
.532
3.000
5.000
5.000
10
.590
.532
3.000
5.000
.750
.532
3.500
5.000
10
.578
.703
.816
.563
3.000
12
.703
.891
1.000
.563
3.500
5.000
12
14
.844
1.016
1.128
.563
3.500
5.000
14
.875
.532
3.500
5.000
16
.969
1.141
1.257
.563
3.500
5.000
16
1.000
.532
3.500
5.000
5.000
18
1.125
.532
3.500
5.000
1.250
.594
4.000
5.000
18
1.094
1.266
1.367
.563
3.500
20
1.219
1.391
1.496
.563
4.000
5.000
20
22
1.343
1.516
1.624
.563
4.000
5.000
22
1.375
.594
4.000
5.000
24
1.453
1.614
1.747
.603
4.000
5.000
24
1.500
.627
4.000
5.000
How to Order Proprietary Receptacle Caps:
Wall Receptacle Caps:
10-101960- XX X
Cable Connecting Receptacle Caps:
10-101961- XX X
Jam Nut Receptacle Caps:
10-101964- XX X
Add desired shell size
Add desired finish suffix†
“FL” designates gray zinc nickel
“3” designates olive drab cadmium
“5” designates Alumilite®
Proprietary caps are supplied with standard bead chains only (as shown
in drawing at left). For other chain options, an MS version cap should be
ordered.
How to Order MS Version Receptacle Caps:
Wall Receptacle Caps:
MS3181- XX
-CA for sash chain
-CAL for long sash chain
-RA for rope chain
-RAL for long rope chain
Jam Nut Recept. Caps:
MS3181- XX
-NA for sash chain
-NAL for long sash chain
Shell size
MS versions are supplied with standard anodize finish only. For other
finish options a proprietary cap should be ordered.
39
How to Order Proprietary Plug Caps:
10-101957-XX X
Add desired shell size
Add desired finish suffix†
“FL” designates gray zinc nickel
“3” designates olive drab cadmium
“5” designates Alumilite®
Proprietary caps are supplied with standard bead chains only (as
shown in drawing at left). For other chain options an MS version
cap should be ordered.
How to Order
MS Version Plug Caps:
MS3180- XX -CA for sash chain
-CAL for long sash chain
-RA for rope chain
Shell Size
-RAL for long rope chain
PT & SP
accessories – dummy receptacles, “O” rings,
plastic dust caps
DUMMY RECEPTACLES – FOR PT, SP, MS/PT
S
.150 DIA. +.004
–.002
4 HOLES
R
M
Shell
Size
K
±.010
M
+.030
-.000
N
+.001
-.005
8
.062
.462
10
.062
12
Proprietary
Version
MS Version
R
±.005
S
±.010
R1
(TP)
S1
(TP)
.473
.734
1.047
.594
.828
.462
.590
.812
1.125
.719
.954
.062
.462
.750
.938
1.250
.812
1.047
14
.062
.462
.875
1.031
1.344
.906
1.141
DUMMY RECEPTACLE
FOR PT, SP, MS/PT CONNECTORS
16
.062
.462
1.000
1.125
1.438
.969
1.234
18
.062
.462
1.125
1.203
1.516
1.062
1.328
MS3115-XXX
10-150921-XXX
20
.062
.556
1.250
1.297
1.672
1.156
1.453
22
.062
.556
1.375
1.375
1.750
1.250
1.578
24
.062
.589
1.500
1.500
1.875
1.375
1.703
R
S
K
N
How to Order Proprietary Dummy Receptacles:
Add desired shell size
Add desired finish suffix†
“FL” designates gray zinc nickel
“3” designates olive drab cadmium
“5” designates Alumilite®
How to Order MS Version Dummy Receptacles:
Add desired shell size
Add desired finish suffix†
-A designates Alumilite®
-L designates electroless nickel
-W designates olive drab cadmium
10-150921-XX X
MS3115-XX X
PLASTIC DUST CAPS – FOR PT, SP
Shell Size
Plug Plastic Dust
Cap
Receptacle Plastic
Dust Cap
6
10-70500-8
10-70506-8S
8
10-70506-12
10-70506-10
10
10-70500-12
10-70506-12
12
10-70506-16
10-70506-14
14
10-70506-18
10-70506-16
16
10-70506-20
10-70506-18
18
10-70506-22
10-70506-20
20
10-70506-24
10-79506-22
22
10-70524-1
10-70506-24
24
10-70506-28
10-70524-1
How to Order Plastic Dust Caps:
To the basic order number add the dust cap size to
match connector plug or receptacle shell size, as
shown in the tables above.
Example: 10-70506-12 would be the correct order
number for a plastic dust cap for a PT00 receptacle,
shell size 10.
All dimensions for reference only.
40
PT accessories
glands
Nylon Cable Glands
Metal Cable Glands
Material:
Nylon 66 (UL Approved 94V-2)
Seal ring:
UL 94V-2 (UL Approved 94V-2)
Thread Type:
Metric; PG, NPT
Temp Range:
Static:
-40° to +100°C
Dynamic: -20° to +80°C
Short Term:
+120°
Current Colors: Gray, Black
Material:
Brass with Nickel; Brass with Tin/Nickel
Clamping:
UL approved PA6, 94V-0
Seal Ring:
UL 94V-2 (UL approved NBR, 94V-2;UL approved
DOW CORNING RUBBER, 94V-0
Thread Type:
Metric, PG, NPT
Protective: IP68 (tighten with o-ring)
Temp Range:
-40° to +100°C
Torque Value (N-M) of hex and cap nuts: 3.0-4.5 N-M M12, M16, M20
are UL recognized under file #E339605
AIGO Part
Thread “A”
M “d”
(mm)
Cable
Range
(mm)
Thread
“L”
(mm)
Clamp
“H”
(mm)
Spanner
“S”
(mm)
AIGO Part
Thread
“A”
M “d”
(mm)
Cable
Range
(mm)
Thread
“L”
(mm)
Clamp
“H”
(mm)
Spanner
“S”
(mm)
AIO-CSM12
M12 x1.5
8
3-6.5
8
20
15
AIO-CSJM12
M12x1.5
6.5
3-6.5
6.2
15
14
19
AIO-CSJM14
M14x1.5
8
4-8
5
19
15
AIO-CSJM16
M16x1.5
9
6-9
6.3
20
18
AIO-CSJM18
M18x1.5
10
5-10
7
20
22
AIO-CSJM20
M20x1.5
12
6-12
8.3
20
22
AIO-CSM16
M16 x 1.5
8
4-8
8
22
AIO-CSM18
M18 x 1.5
10
5-10
9
25
22
AIO-CSM18
M20 x 1.5
12
6-12
9
30
24
AIO-CSM20
M22 x 1.5
14
10-14
10
30
27
AIO-CSJM22
M22x1.5
14
10-14
8
24
24
AIO-CSM22
M24 x 1.5
14
10-14
10
30
27
AIO-CSJM24
M24x1.5
14
10-14
8
24
27
AIO-CSM24
M25 x 1.5
18
13-18
10
30
33
AIO-CSJM25
M25x1.5
18
13-18
7.8
23
30
AIO-CSM25
M30 x 2.0
18
13-18
11
33
33
AIO-CSJM27
M27x1.5
18
13-18
8
26
30
AIO-CSJM30
M30x2.0
18
13-18
8
26
32
AIO-CSJM32
M32x1.5
25
18-25
10
27
40
AIO-CSJM36
M36x2.0
25
18-25
10
34
40
AIO-CSM30
M32 x 1.5
25
18-25
11
38
42
AIO-CSM32
M33 x 2.0
25
18-25
11
39
42
AIO-CSM33
M40 x 1.5
32
22-32
13
48
54
AIO-CSJM40
M40x1.5
32
22-32
10
39
50
AIO-CSM40
M50 x 1.5
38
32-38
14
50
60
AIO-CSJM50
M50x1.5
38
32-38
11
39
60
AIO-CSM50
M72 x 2.0
57
51-57
16
75
80
AIO-CSJM63
M63x1.5
44
37-44
12
43
67
AIO-CSM72
NPT1/2”
12
6-12
13.6
28
24
AIO-CSJM72
M72x1.5
52
46-52
16
47
75
AIO-CSJM80
M80x2.0
60
52-60
20
57
90
AIO-CSIN1/2
NPT 3/4”
18
13-18
14.1
32
33
AIO-CSJM90
M90x2.0
70
62-70
20
57
100
AIO-CSIN3/4
NPT 1”1/2”
32
22-32
17.3
50
54
AIO-CSJIN1/2
NPT 1/2”
12
6-12
13.6
25
24
AIO-CSJIN3/4
NPT 3/4”
18
13-18
14.1
26
30
AIO-CSJIN5/4
NPT 1”1/4”
32
22-32
17.3
41
50
AIO-CSJIN3/2
NPT 1”1/2”
32
22-32
17.3
46
50
65
AIO-CSIN3/2
G 1/2”
12
6-12
9
26
24
AIO-CSGIN3/4
G 3/4”
18
13-18
11
27
33
AIO-CSGIN1
G1”
25
18-25
11
33
42
AIO-CSJIN2
NPT2”
44
37-44
17.7
46
AIO-CSGIN5/4
G1”1/4
28
21-28
13
48
54
AIO-CSJIN5/2
NPT2 1/2”
52
46-52
23.7
58
80
AIO-CSGIN3/2
G1”1/2”
32
22-32
13
48
54
AIO-CSJIN3
NPT3”
70
62-70
26
58
100
AIO-CSGIN5/2
G2”1/2”
57
51-57
14
75
80
AIO-CSJGIN1/2
G1/2”
12
6-12
8
24
24
AIO-CSJGIN3/4
G3/4”
18
13-18
8
27
30
AIO-CSPG7
PG7
6.5
3-6.5
8
20
15
AIO-CSJGIN1
G1”
25
18-25
10
34
40
AIO-CSPG9
PG9
8
4-8
8
22
19
AIO-CSJGIN5/4
G1”1/4”
32
22-32
10
39
50
AIO-CSPG11
PG11
10
5-10
8
24
22
AIO-CSJGIN3/2
G1”1/2”
32
22-32
10
39
50
AIO-CSPG13.5
PG13.5
12
6-12
9
26
24
AIO-CSJGIN2
G2”
44
37-44
12
44
65
AIO-CSPG16
PG16
14
10-14
10
28
27
AIO-CSJGIN 5/2
G2 1/2”
52
46-52
16
47
82
AIO-CSJPG7
PG7
6.5
3-6.5
6
18
14
AIO-CSPG21
PG21
18
13-18
11
33
33
AIO-CSJPG9
PG9
8
4-8
7
21
18
AIO-CSPG29
PG29
25
18-25
11
38
42
AIO-CSJPG11
PG11
10
5-10
7
20
22
AIO-CSPG36
PG36
32
22-32
13
48
54
AIO-CSJPG13.5
PG13.5
12
6-12
8
24
22
AIO-CSPG42
PG42
38
32-38
14
52
60
AIO-CSJPG16
PG16
14
10-14
8
25
24
AIO-CSJPG21
PG21
18
13-18
8
26
30
AIO-CSJPG36
PG36
32
22-32
10
38
50
AIO-CSJPG42
PG42
38
32-38
11
42
60
AIO-CSJPG48
PG48
44
37-44
12
44
65
For additional information on other products available refer to our
Cord grips & Cable Glands, Catalog 12-055
41
Application Tools
“SE”
The following data includes information pertaining to the application tools for crimping, inserting and removing size
20, 16, and 12 contacts incorporated in Amphenol® Miniature Cylindrical Connectors.
All crimping tools included are the “full cycling” type, and when used as specified by the manufacturer, provide
reliable crimped wire to contact termination.
Tool frames and turret heads are available from approved tool manufacturers; consult Amphenol, Sidney, NY for listings.
Assembly instructions are available online at www.amphenol-industrial.com
See the following:
L-786 for SE assembly instructions
L-555 for solder type instructions
CRIMPING TOOLS
FOR PT-SE, SP-SE, MS/PT-SE
(MIL-DTL-26482, Series 1) Connectors
MS Tool Part Number
Contact Size
Tool From
Turret Head
20
M22520/1-01
M22520/1-02
16
M22520/1-01
M22520/1-02
12
M22520/1-01
M22520/1-02
INSERTION/REMOVAL TOOLS
FOR PT-SE, SP-SE, MS/PT-SE
(MIL-DTL-26482, Series 1) Connectors
Insertion Tool
Contact Size
Removal Tool
Amphenol®
Contact
Insertion Pliers
Amphenol®
Contact Insertion
Tool
MS
Part Number Contact Insertion Tool
Amphenol®
Contact
Removal Tool
MS
Part Number
Contact Removal
Tool
20
11-8107-20
11-7401-20
M81969/17-03
11-7880-20
M81969/19-07
16
11-8107-16
11-7401-16
M81969/17-04
11-7880-16
M81969/19-08
12
-
-
M81969/17-05
-
M81969/19-09
42
Contacts - Power and Thermocouple Crimp
for miniature cylindrical connectors
The following tables provide part number information for crimp contacts used in Amphenol® Miniature Cylindrical
Connectors. For additional information, consult Amphenol, Sidney, NY.
CRIMP CONTACTS for MIL-DTL-26482, Series 1
(PT-SE, SP-SE) Connectors
Pins
Contact Size
Accommodates
Wire Size
Sockets
MS Number
Amphenol®
Proprietary
Number
MS Number
Amphenol®
Proprietary
Number
20
20, 22 & 24
AWG
M39029/31-240
10-683787-20P
M39029/32-259
10-731210-3D1
16
16, 18 & 20
AWG
M39029/31-228
10-683788-16P
M39029/32-247
10-679379-16D
12
12 & 14 AWG
M39029/31-235
10-807100-125
M39029/32-254
10-807103-125
20-16
16 AWG
10-330930-20F
10-807155-205
16-20
20 AWG
10-330932-16F
10-330933-16F
12-10
12 AWG
10-330938-12F
10-330939-12F
THERMOCOUPLE CONTACTS for Miniature Connectors
Size
Material
Pins
Proprietary Part Number
Sockets
Proprietary Part Number
SE
SE
Chromel
10-330940-21P
10-330940-21S
Alumel
10-330940-22P
10-330940-22S
Chromel
10-330940-1P
10-330940-1S
Alumel
10-330940-2P
10-330940-2S
Iron
10-330940-3P
10-330940-3S
Constantan
10-330940-4P
10-330940-4S
16 Crimp Termination
20 Crimp Termination
See L-776 for thermocouple contact termination instructions. These are online at www.amphenol-industrial.com
For PCB contacts for miniature connectors, see page 20.
43
Coaxial Contacts
for miniature cylindrical connectors
Amphenol® Miniature Connectors can incorporate shielded coax
contacts. The Miniature family is built around MIL-DTL-26482
specifications, with Mil-approved and proprietary styles offered.
Normal operating voltage for Miniature cylindricals with power only
contacts is up to 1,000 VAC (RMS) at sea level.
Table 1: Miniature Cylindricals offer these features for contact
termination
flexibility:
• Several insert arrangements that can incorporate:
• Size 8 & 12 Crimp Coax contacts for Crimp type
• Size 8 & 12 Solder Coax contacts for Solder type
• Wide selection of connector shell styles and sizes
• Standard power contact options within the various connector
styles include: solder type, crimp front release, crimp rear release
• Coax contacts are designed to the same high performance
standards as power contacts. Coax and power contacts may be
intermixed with no degradation of connector reliability.
• No mis-mating or cross-plugging with insert rotation and keyway
polarization.
Table 2: GENERAL ORDERING INFORMATION
Amphenol Miniature Cylindricals are normally supplied with a full
complement of power contacts, separately packaged. Coax contacts
are ordered by part number as referenced in the part number charts
on the following pages of this catalog, and are substituted for the
power contacts at the time of the cable or equipment assembly. If
the application is for coax only, the connector may be ordered less
contacts and no power contacts will be supplied.
Installation instructions for the coax contacts for Miniature
Connectors are provided in Amphenol documents as follows: L-633 for
solder type; L-613 for SE type.
HOW TO ORDER:
A.
Select the coax contacts designed for the cable being used
from the applicable charts in this catalog for each Miniature
type (solder, SE).
B.
Select a connector insert from those shown on pages 4-5
which will accommodate the quantity and size of coaxial
contacts needed plus any power contacts required. Note:
Size 8S and 12S contacts are used with connector inserts
through shell size 18 only. For larger connector shell sizes,
use size 8L contacts.
C.
Determine the Miniature Cylindrical type, shell style, finish,
service class and insert rotation required for your application.
D.
Consult Amphenol, Sidney NY with the pertinent cable,
contact, insert arrangement and connector style choices for
complete connector part number.
44
Solder Coax Contact
for use in Miniature Solder Type Connectors
Pin Crimp Coax Contact
for use in Miniature Crimp SE Type Connectors
Socket Crimp Coax Contact
for use in Miniature Crimp SE Type Connectors
Coaxial Contacts
for miniature cylindrical connectors, cont.
Amphenol® Coaxial Contacts designed for use
in Miniature Cylindrical Connectors offer the same
durability advantages and design benefits for reliable
interconnection as the Amphenol coax contacts used
in high performance D38999 connectors. A variety
of military and commercial shielded cables are
accommodated within the miniature cylindrical series.
Amphenol supplies coax contacts for solder and crimp
SE connector styles.
TYPICAL MINIATURE CRIMP COAX
SOCKET CONTACT has crimp socket outer
contact with a solder pin inner contact
Other features of the coax for miniature cylindricals include:
•
•
•
•
Miniature coax design has an outside nut within the
assembly for fast, reliable assembly of contact to
cable.
All types feature solder style inner contacts and
crimp style outer contacts for reliable cable
termination
Miniature coax crimp type contacts are designed for
use in Miniature crimp series connectors
Miniature coax solder type contacts are designed
for use in Miniature solder series connectors. These
come pre-installed into the solder connector.
TYPICAL MINIATURE CRIMP COAX PIN
CONTACT has crimp pin outer contact
with a solder socket inner contact
TYPICAL ELECTRICAL PERFORMANCE
Size 8 and 12 Coax Contacts
Contact Resistance:
Center @ 1 Amp, 170 millivolts max. voltage drop @ 25°C
Outer @ 12 Amps, 150 millivolts max. voltage drop @ 25°C
Dielectric Withstanding Voltage:
Size 8: 1,300 VAC Rms @ sea level
Size 12: 1,000 VAC Rms @ sea level
Size 8 & 12: 250 VAC Rms @ 50,000 ft.
Insulation Resistance
5,000 megohms minimum @ 25°C
Typical VSWR for size 8 & 12 PT-SE Types II & III only:
1.2 + .12F (GHz) up to 10 GHz
EXPLANATION OF TYPE CLASSIFICATIONS:
PT-SE Type I
is moisture seal design with internal O-ring.
PT-SE Type II
is 50 ohm impedance matched version. Contacts
terminated to other than 50 ohm cables are therefore not matched.
PT-SE Type III is 50 ohm contact, non-serviceable after assembly.
Solders are non-impedance matched contacts.
CONTACT FINISHES:
Suffix Finish
1
0.00020 min. silver over copper flash
2
0.00005 min. gold (Knoop hardness 130-200) over silver
3
0.00010 min. gold (Knoop hardness 130-200) over silver
4
0.00010 min. gold (Knoop hardness 130-200) over copper
5
0.00005 min. gold (Knoop hardness 130-200) over nickel
E
0.00005 min. gold (Knoop hardness 90 max.) over copper
F
0.00005 min. gold (Knoop hardness 130-200) over copper
H
0.00010 min. gold (Knoop hardness 130-200) over copper
45
Coaxial Contacts
for miniature cylindrical connectors, cont.
solder (MIL-DTL-26482 Series 1 type) - application data
MATING
PIN DIA
L
H
F
G
SOCKET
L
H
F
G MATING
PIN DIA
PIN
SOLDER COAX CONTACTS
For use in Miniature Solder Type Connectors: PT, SP, and MS/PT Styles
Dimensional Data
(See Drawings above)
Contact Part Number
Contact
Size
Cable
Pin
RG-58C/U,
RG-141A/U,
RG-303/U
Socket
G
Dia.
H
Dia.
±0.001
F
Across
Flats
±0.004
Pin
Crimp Ferrule Tools
Retainer
Nut
Wrench
Socket
MIL-T-22910/7-1
Tool
Use with Die Part
Number
MIL-C-22520/5-01
Tool
Use with Die Part
Number
MIL-C-22520/10-01
Tool
Use with Die Part
Number
M22910/7-15 (B)
M22520/5-05 (B)
M22520/5-41 (B)
M22520/10-07 (B)
M22910/7-18 (B)
M22520/5-45 (B)
11-8676-3
11-8678-2
L
Length Ref.
21-33020-2
21-33019-2
8S
0.040
± 0.001
0.219
0.280
1.114
1.115
21-33020-1
21-33019-1
8L
0.040
± 0.001
0.219
0.280
1.176
1.177
21-33020-3
21-33019-3
8S
0.040
± 0.001
0.219
0.280
1.114
1.115
RG-142B/U,
Times
MI51115
21-33020-7*
21-33019-7*
8S
0.040
± 0.001
0.219
0.280
1.114
1.115
M22910/7-16 (B)
M22520/5-43 (B)
RG-161/U,
RG-174A/U,
RG-179B/U,
RG-187A/U,
RG-188A/U,
RG-316/U
21-33020-32*
21-33019-32*
12S
0.0300
± 0.0005
0.140
0.172
1.092
1.093
M22910/7-12 (B)
M22520/5-03 (A)
M22520/5-08 (A)
M22520/5-35 (B)
M22520/10-05 (A)
11-8676-1
RG-178B/U
21-33020-4
21-33019-4*
8S
0.040
± 0.001
0.219
0.280
1.114
1.115
M22910/7-11 (B)
M22520/5-03 (B)
M22520/5-33 (B)
M22520/10-05 (B)
11-8676-2
RG-196A/U
21-33020-31†
21-33061-31*†
12S
0.0300
± 0.0005
0.140
0.172
1.092
1.093
M22910/7-11 (B)
M22520/5-03 (B)
M22520/5-33 (B)
M22520/10-05 (B)
11-8676-1
RG-180B/U,
RG-195A/U,
Raychem
5022D1312-9
21-33020-5*
21-33019-5*
8S
0.040
± 0.001
0.219
0.280
1.114
1.115
M22910/7-15 (B)
M22520/5-05 (B)
M22520/5-41 (B)
M22520/10-07 (B)
11-8676-2
Raychem
5021D1331-9
21-33020-6*
21-33019-6*
8S
0.040
± 0.001
0.219
0.280
1.114
1.115
M22910/7-15 (B)
M22520/5-05 (B)
M22520/5-41 (B)
M22520/10-07 (B)
11-8676-2
Thermatics
2929-29
21-33020-33
21-33061-33
12S
0.0200
± 0.0005
0.140
0.172
1.092
1.093
M22910/7-13 (B)
M22520/5-37 (B)
RG-59B/U,
RG-62A/U,
RG-62B/U,
RG-210/U
NOTE: Contacts can be ordered by part numbers given in chart
NOTE: Size 8S and 12S contacts are used with connector
inserts through shell size 18 only. For larger connector shell
sizes, use size 8L contacts.
CONTACT FINISH: For all contacts in this series feature
0.000050 minimum gold (Knoop hardness 130-200).
11-8676-2
11-8676-1
* Consult Amphenol, Sidney NY for availability
CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner
part numbers indicate applicable die closure. Commercial
equivalents with the same die closure dimension may be used.
† 21-33020-31 and 21-33061-31 only mate with each other
46
Coaxial Contacts
for miniature cylindrical connectors, cont.
crimp SE (MIL-DTL-26482 Series 1 type) - application data
L
F
L
G
H
G
H
MATING
PIN DIA
MATING
PIN DIA
SOCKET
F
PIN
NOTE: All contacts of the same size and the same inner and
outer contact diameters (G & H) will mate with each other.
SE CRIMP COAX CONTACTS
For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, and MS/PT-SE Styles
Contact Part Number
Cable
RG-55B/U,
RG-142A/U,
RG-142B/U,
RG-223/U
RG-58C/U,
RG-141A/U,
RG-303/U
RG-59B/U,
RG-62A/U,
RG-62B/U,
RG-210/U
RG-140/U,
RG-302/U
RG-161/U,
RG-174A/U,
RG-179B/U,
RG-187A/U,
RG-188A/U,
RG-316/U
RG-178B/U,
RG-196A/U
Dimensional Data (See Drawings above)
Finish
Contact
on
Type
Size
Mating
Parts
Pin
Socket
21-33012-21
21-33012-25
21-33038-21
21-33038-25*
21-33011-21
21-33011-25
21-33037-21
21-33037-25
8
8
8
8
I
II
I
II
21-33138-21( )*
21-33138-25( )*
21-33137-21( )*
21-33137-25( )*
8
8
I
II
21-33012-22
21-33012-26
21-33038-22*
21-33038-26*
21-33138-22( )*
21-33138-26( )*
21-33011-22
21-33011-26
21-33037-22
21-33037-26*
21-33137-22( )
21-33137-26( )*
8
8
8
8
8
8
I
II
I
II
I
II
G
Dia.
H
Dia.
±0.001
F
Across
Flats
±0.004
0.0355
±0.0010
0.218
0.0355
±0.0010
Installation Tools
Crimp Ferrule Tools
L Length Ref.
Retainer Nut
Wrench
Socket
MIL-T-22910/7-1
Tool
Use with Die Part
Number
MIL-C-22520/5-01
Tool
Use with Die Part
Number
MIL-C-22520/10-0
Tool
Use with Die Part
Number
0.280
1.156 1.144
M22910/7-17 (B)
M22520/5-05 (A)
M22520/5-19 (B)
M22520/10-07 (A)
11-8676-2
11-8369-5 11-7880-8
11-8660-5 11-8154-1
0.218
0.280
1.156 1.144
M22910/7-15 (B)
M22520/5-05 (B)
M22520/5-41 (B)
M22520/10-07 (B)
11-8676-2
11-8369-4 11-7880-8
11-8660-4 11-8154-1
0.0355
±0.0010
0.218
0.280
1.156 1.144
M22910/7-18 (B)
M22520/5-45 (B)
11-8676-3
11-8369-5 11-7880-8
11-8660-5 11-8154-1
0.0355
±0.0010
0.218
0.280
1.156 1.144
M22910/7-17 (B)
M22520/5-05 (A)
M22520/5-19 (B)
11-8676-2
11-8369-5 11-7880-8
11-8660-5 11-8154-1
0.0355
±0.0010
0.218
0.280
1.156 1.144
11-8676-2
11-7880-8
11-8154-1
Pin
Insertion
Removal
2
4
**
2
4
**
21-33012-36
21-33011-36
8
II
2
21-33038-36*
21-33037-36
8
II
4
21-33138-36( )*
21-33137-36( )
8
II
**
21-33012-37*
21-33011-37*
8
II
2
21-33038-37*
21-33037-37*
8
II
4
21-33138-37( )*
21-33012-34
21-33012-30
21-33038-34
21-33038-30
21-33138-34( )*
21-33138-30( )*
21-33012-1
21-33012-4
21-33038-1*
21-33038-4
21-33137-37( )*
21-33011-34
21-33011-30
21-33037-34
21-33037-30
21-33137-34( )*
21-33137-30( )*
21-33011-1
21-33011-4
21-33037-1*
21-33037-4*
8
8
8
8
8
8
8
12
12
12
12
II
I
II
I
II
I
II
I
II
I
II
**
21-33138-1( )*
21-33138-4( )*
21-33137-1( )
21-33137-4( )*
12
12
I
II
**
21-33012-35
21-33011-35
8
I
2
21-33038-35
21-33037-35
8
I
4
21-33138-35( )*
21-33137-35( )*
8
I
**
21-33012-3*
21-33012-5
21-33038-3*
21-33038-5
21-33138-3( )*
21-33138-5( )*
21-33011-3*
21-33011-5
21-33037-3*
21-33037-5*
21-33137-3( )*
21-33137-5( )*
12
12
12
12
12
12
I
II
I
II
I
II
M22520/10-07 (A)
2
4
**
M22910/7-12 (B)
2
4
11-8369-2
11-8660-2
M22520/10-05 (A)
0.0200
±0.0005
0.128
0.172
1.092 1.072
11-8676-1
11-7880-12
11-8154-2
0.0355
±0.0010
0.218
0.280
1.156 1.144
11-8676-2
11-7880-8
11-7880-8
M22910/7-11 (B)
2
4
M22520/5-03 (A)
M22520/5-08 (A)
M22520/5-35 (B)
0.0200
± 0.0005
0.128
0.172
M22520/5-03 (B)
M22520/5-33 (B)
1.092 1.072
11-8369-1
11-8660-1
11-8676-1
11-7880-12
11-8154-2
**
NOTE: Contacts can be ordered by part numbers given in chart
** See finish options for SE crimp Miniature contacts listed on
page 44. Replace the parenthesis of the contact part number with
the finish suffix number. However, you should consult Amphenol,
Sidney, NY regarding the availability of all finish choices for each
part number.
* Consult Amphenol, Sidney NY for availability
CRIMPING TOOLS: Italicized letters in parenthesis that follow
positioner part numbers indicate applicable die closure.
Commercial equivalents with the same die closure dimension may
be used.
CHART CONTINUES ON NEXT PAGE
47
Coaxial Contacts
for miniature cylindrical connectors, cont.
crimp SE (MIL-MDL-26482 Series 1 type) - application data, cont.
SE CRIMP COAX CONTACTS
For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, and MS/PT-SE Styles
Dimensional Data
Contact Part Number
Cable
RG-180B/U,
RG-195A/U
Raychem
9527E1118,
RG-180B/U,
RG-195A/U
RG-188 or
RG-316
Double Braid
Thermax
50C-25ADS-1
Pin
Socket
21-33012-24
21-33012-46*
21-33011-24
21-33011-46*
8
8
I
II
2
21-33038-24
21-33038-46*
21-33037-24
21-33037-46*
8
8
I
II
4
21-33138-24( )* 21-33137-24( )*
21-33138-46( )* 21-33137-46( )*
8
8
I
II
**
21-33106-40( )
21-33105-40( )
12
III
**
21-33012-6*
21-33012-7*
21-33011-6*
21-33011-7*
12
12
I
II
2
21-33038-6*
21-33038-7*
21-33037-6*
21-33037-7*
12
12
I
II
4
21-33138-6( )*
21-33138-7( )*
21-33137-6( )*
21-33137-7( )*
12
12
I
II
**
21-33012-44
21-33011-44
8
II
2
21-33038-44*
21-33037-44*
8
II
4
8
II
**
21-33138-44( )* 21-33137-44( )*
RG-195
Double Braid
21-33012-28
21-33011-28
8
I
2
21-33038-28*
21-33037-28*
8
I
4
21-33138-28( )* 21-33137-28( )*
RG-122/U,
Raychem
5022E5111
8
I
**
21-33012-23
21-33012-27
21-33011-23
21-33011-27
8
8
I
II
2
21-33038-23*
21-33038-27
21-33037-23*
21-33037-27
8
8
I
II
4
8
8
I
II
**
21-33138-23( )* 21-33137-23( )*
21-33138-27( )* 21-33137-27( )*
Raychem
9530D5314
21-33012-31
21-33011-31
8
I
2
21-33038-31
21-33037-31
8
I
4
21-33138-31( )* 21-33137-31( )*
Raychem
9527A1317
8
I
**
21-33012-39
21-33011-39
8
II
2
21-33038-39*
21-33037-39*
8
II
4
8
II
**
21-33138-39( )* 21-33137-39( )*
Raychem
7527A1318
Westrex
199-49-1,
Tensolite
30850/87T-1
Finish
Contact
on
Type
Size
Mating
parts
21-33012-40*
21-33011-40
8
II
2
21-33038-40*
21-33037-40*
8
II
4
21-33138-40*
21-33137-40( )*
8
II
**
21-33012-43
21-33011-43
12
II
2
21-33038-43
21-33037-43
12
II
4
12
II
**
21-33138-43( )* 21-33137-43( )*
Installation Tools
Crimp Ferrule Tools
G
Dia.
H
Dia.
±0.001
F
Across
Flats
±0.004
0.0355
± 0.0010
0.218
0.280
0.0200
± 0.0005
0.128
0.0200
± 0.0005
0.128
L Length Ref.
Pin
Socket
1.156 1.114
0.899 0.879
0.172
MIL-T-22910/7-1 47MIL-C-22520/5-01 MIL-C-22520/10-0
Tool
Tool
Tool
Use with Die Part
Use with Die Part
Use with Die Part
Number
Number
Number
M22520/7-15 (B)
M22520/5-05 (B)
M22520/5-41 (B)
Retainer
Nut
Wrench
Insertion
Removal
11-8369-4
11-8660-4
11-7880-8
11-8154-1
11-8674-2
11-7880-12
11-8154-2
11-8676-1
11-8369-2
11-8660-2
11-7880-12
11-8154-2
11-8676-2
11-8369-4
11-8660-4
11-7880-8
11-8154-1
M22520/10-07 (B) 11-8676-2
Daniels GS200 Tool with G2P330 or
M22520/31-01 Tool with Positioner M22520/31-02
1.092 1.072
M22910/7-13 (B)
M22520/5-37 (B)
0.0355
± 0.0010
0.128
0.280
1.156 1.144
0.0355
± 0.0010
0.128
0.280
1.156 1.144
M22910/7-16 (B)
M22520/5-43 (B)
11-8676-2
11-8369-4
11-8660-4
11-7880-8
11-8154-1
0.0355
± 0.0010
0.218
0.280
1.156 1.144
M22520/7-15 (B)
M22520/5-05 (B)
M22520/5-41 (B)
M22520/10-07 (B) 11-8676-2
11-8369-4
11-8660-4
11-7880-8
11-8154-1
0.0355
± 0.0010
0.218
0.280
1.156 1.144
M22910/7-15 (B)
M22520/5-05 (B)
M22520/5-41 (B)
M22520/10-07 (B) 11-8676-2
11-8369-4
11-8660-4
11-7880-8
11-8154-1
0.0355
± 0.0010
0.218
0.280
1.156 1.144
M22910/7-12 (B)
M22520/5-03 (A)
M22520/5-08 (A)
M22520/5-35 (B)
M22520/10-05 (A) 11-8676-2
11-8369-2
11-8660-2
11-7880-8
11-8154-1
0.0200
± 0.0005
0.128
0.172
1.092 1.072
M22910/7-11 (B)
M22520/5-03 (B)
M22520/5-33 (B)
M22520/10-05 (B) 11-8676-1
11-8369-1
11-8660-1
11-7880-12
11-8154-2
NOTE: Contacts can be ordered by part numbers given in chart
** See finish options for SE crimp Miniature contacts listed on page 44.
Replace the parenthesis of the contact part number with the finish suffix
number. However, you should consult Amphenol, Sidney, NY regarding the
availability of all finish choices for each part number.
* Consult Amphenol, Sidney NY for availability
48
CRIMPING TOOLS: Italicized letters in parenthesis that follow
positioner part numbers indicate applicable die closure.
Commercial equivalents with the same die closure dimension
may be used.
Mounting Recommendations
for miniature cylindrical connectors
FLANGE MOUNTED CONNECTORS
All flange mounting PT connectors use standard MS mounting dimensions.
They cannot be back panel mounted due to coupling clearance. The PTB
(thru-bulkhead) type connector must also be back panel mounted on one side.
Flange gaskets are available for both series, see page 37.
R (TP)
Shell Size
FLANGE MOUNTED CONNECTORS
D Dia.
PT, PTB
SP
PT
SP, PTB
6
.469
.641
.323
.439
8
.594
.734
.449
.563
10
.719
.812
.573
.680
12
.812
.938
.699
.859
14
.906
1.031
.823
.984
16
.969
1.125
.949
1.108
18
1.062
1.203
1.073
1.233
20
1.156
1.297
1.199
1.358
22
1.250
1.375
1.323
1.483
24
1.375
1.449
1.449
-
4 HOLES
.120 Dia. for Shell Sizes 6-22
PC & PT
.147 Dia. for
Size 24 PT
.150 Dia. for
SP only
R
(TP)
No. 4 Screw
for PC & PT
No. 6 Screw
for SP and for
Size 24 PT
D Dia.
R
2
R
2
SECTION
CUT-OUT
JAM NUT MOUNTINGS
JAM NUT MOUNTINGS
The jam nut design has become very popular because it allows bench wiring of
harness assemblies. The labor saving often offsets the added cost of the jam
nut receptacle which is due to the self contained “O” ring and the extra nut.
Shell Size
6
R
+.010
-.000
.447
B
+.000
-.010
.420
F
±.010
.286
P Panel Thickness
Min.
.062
F
Max.
.125
B
8
.572
.542
.331
.062
.125 R
10
.697
.669
.375
.062
.125
12
.884
.830
.442
.062
.125
14
1.007
.955
.486
.062
.125
16
1.134
1.084
.530
.062
.125
18
1.259
1.208
.573
.062
.125 PT ONLY
20
1.384
1.333
.641
.062
.250
22
1.507
1.459
.685
.062
.250
24
1.634
1.575
-
.062
.250
R
F
CUT-OUT FOR
HERMETIC RECEPTACLE MOUNTINGS
This series must be mounted in such a way as to preserve the
hermetic seal provided by the glass insert. Mounting data for
box and jam nut receptacles is given above. Cut-out required for
solder mounting receptacles (N) is given below.
Shell
Size
N
Max.
6
.458
The finish of each of these hermetic receptacles is fused electrodeposited tin for easy solderability, and protected by a special
lacquer for optimum shelf life. The lacquer will not interfere with
any soldering operation.
8
10
.582
.692
12
.801
14
16
18
20
22
24
.926
1.051
1.176
1.395
1.375
1.520
Low temperature solder should be used and the addition of a
solder fillet at arrow points on drawing at right is recommended.
Care must be taken that the operating temperature of the final
assembly does not rise above the melting point of tin (440° F).
49
F
JAM NUT MOUNTINGS
F
B
CUT-OUT FOR
PIN LOCATION
PT ONLYFOR PC ONLY
SECTION
PIN LOCATION FOR PC ONLY
HERMETIC RECEPTACLES
N
CUT-OUT
SOLDER
RECEPTACLE
JAM NUT
RECEPTACLE
(See dimensions
above)
BOX
RECEPTACLE
(See dimensions
above)
Other Amphenol Miniature Cylindrical
Connectors
Geophysical Miniature Cylindricals
Designed for the Geophysical industry’s rugged
environments, the Amphenol® RPT Series connector
has custom features that provide reliability in extreme
temperature and moisture conditions.
The unique shell design provides stronger shells along
with an anodized (non-conductive) finish for greater
salt, corrosion and abrasion resistance. Coupling nuts
are manufactured with round detent holes and are sold
separately for greater customer flexibility.
See product data sheet #146.
RJ Field Bayonet Cylindricals
Amphenol PCD division provides MIL-DTL-26482 bayonet
coupling cylindrical connectors with an RJ45 Ethernet
interface*. These are designed for use in all levels of harsh
environments from industrial to mil-aero applications
providing IP67 protection from dust, fluids, vibration, shock
and traction. The Amphenol® RJ Field allows the use of
Ethernet Class D/Cat 5 and Cat 5e connections for 10 BaseT,
100 Base TX, or 1000 BaseT networks. It works with any
standard RJ45 cordset with no extra tooling. It also offers
reinforced EMI protection.
For more information go online to www.rjfield.com or ask for
the Field Series brochure.
* RJ Field Bayonet and other Field Series products are available through
Amphenol PCD. These include RJF TV within MIL-DTL-38999 Series III
threaded coupling connectors, and RJF 544 within ECTA push-pull plastic
shell coupling.
50
工商网监
湘ICP备2023018690号
