PT02SE18-11PW

MATES WITH ITT CANNON AND SOURIAU MIL-DTL-26482 The Amphenol MIL-DTL-26482 Series I PT/PT-SE offers high-density contact arrangements in a circular shell. PT offers solder contacts, PT-SE offers highperformance crimp contacts, and PT-CE offers a commercial crimp option. These circular connectors provide quick-disconnect bayonet coupling for rapid mating and unmating, and several mounting styles and shell sizes. • Intermateable, intermountable and interchangeable with all MIL-DTL-26482 connectors APPLICATIONS FEATURES • Power generators • Off-road vehicles • Industrial machinery • Engines • Earth-moving equipment • Telecommunications • Sensors • Ships • Traffic control • Motion control • Mobile equipment RUGGED SHELL Aluminum alloy shell and hardware create a rugged connector with minimal weight. These connectors have been used extensively in commercial, military, and aerospace environments. Standard shells accept all MIL-DTL-26482 accessories. 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I Amphenol PT/PT-SE MIL-DTL-26482 Series I ENVIRONMENTALLY-SEALED Complete moisture sealing is achieved by combining four seals: shell, peripheral, interfacial, and wire. Wire seal is accomplished by multiple ripple design, exceeding the wire sealing requirements of MIL-DTL-26482. RESISTANT TO MILITARY ENVIRONMENTS These connectors will operate in temperatures from -67˚F to +257˚F (-55˚C to +125˚C) under the harshest possible conditions. WIDE RANGE OF WIRE GAUGES AND CURRENT-CARRYING CAPACITY Up to 23 amps with wire gauges from 24 to 12 AWG wire. RESILIENT INSULATOR & GROMMET A resilient neoprene insulator and integrated rear wire sealing grommet guarantees a liquid-tight assembly. Crimp contacts that can be inserted from the rear of the connector are available. Solder contacts are permanently bonded into the insulator. SOLDER OR CRIMP GOLD-PLATED CONTACTS PT connector contacts are gold-plated per MIL-G-45204 type II. PT-CE commercial crimp contacts are not military-approved, but the PT-SE crimp contacts are built in accordance to MIL-C-39029. Both types of contacts are crimped with the standard M22520/1 crimp tool. Socket contacts are closed to eliminate damage from test probes and to help prevent misaligned pins during engagement. Contact insertion is from the rear of the connector. When the contact is fully inserted, it snaps securely into retention tines embedded in the insulator. Contact extraction is accomplished from the front with the proper extraction tool. Pressing the tool plunger pushes the contact out through the rear of the connector. AGENCY APPROVALS • MIL-DTL-26482 • UL#E115497, for solder contacts only For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 123 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I TECHNICAL SPECIFICATIONS MATERIALS & FINISHES Shell Aluminum alloy Plating Anodic coating (alumilite), olive drab chromate over cadmium over nickel, electroless nickel, olive drab zinc, non-conductive black zinc, conductive black zinc and gray zinc nickel Contacts Copper alloy Platings Gold-plated, 50 microinches minimum per MIL-G-45204 type II. Insulator Resilient neoprene. PT-SE and PT-CE insulators encase a tough plastic wafer with contact retention tines for high-reliability retention of crimp contacts. ELECTRICAL DATA Operating Voltage & Test Voltage SERVICE RATING* TEST ALTITUDE TEST VOLTAGE MAXIMUM OPERATING VOLTAGE 1 Sea Level 2 1 70,000 feet 2 DC AC (RMS) DC 850 600 2,100 AC (RMS) 1,500 1,400 1,000 3,200 2,300 400 300 535 375 600 450 700 500 *Each insulator layout has a specific “service rating.” The service ratings for each layout are listed on a pages 127, 129-131. Current Rating POTENTIAL DROP CONTACT SIZE RATED CURRENT TEST CURRENT (MILLIVOLTS) AMPS (MAX.) AMPS (WORKING) INITIAL 20 13 7.5 < 55 16 22 13 < 50 12 41 23 < 42 Wire Range Sizes 24 to 12 AWG (and coax) Contact Resistance When tested to MIL-STD-1344 Method 3004, will not exceed voltage drops listed in table. Consult MIL-DTL-26482, 3.6.4 for details. Insulation Resistance 5,000 megohms minimum at 77˚F (25˚C) MECHANICAL Operating Temperature -67˚F to +257˚F (-55˚C to +125˚C) Sealing 48 hours in 6 feet of water per MIL-DTL-26482 4.6.14. Meets 10- and 20-day 50-95% humidity testing per MIL-STD-1344 Method 1002.2 per MIL-DTL-26482. 124 Wire Sealing Range: Per MIL-DTL-26482 1.4 CONTACT SIZE AWG WIRE SIZE MIN. (PT) 20 24, 22, and 20 .047 (1.19) .047 (1.19) .083 (2.11) 16 20, 18, and 16 .066 (1.68) .066 (1.68) .109 (2.77) 12 12 and 14 .097 (2.46) .097 (2.46) .142 (3.61) INSULATION OUTSIDE DIAMETER LIMITS: INCHES (MM) MIN. (PT-SE/PT-CE) MAX. (PT/PT-SE/PT-CE) For assistance in North America: +1 800.675.1214 • www.peigenesis.com • sales@peigenesis.com MECHANICAL Insulation Strip Lengths CONTACT WIRE SIZE SIZE (AWG) STRIP LENGTH INCHES (MM) 20 20-24 .275 (7.0) 16 16-20 .250 (6.4) 12 12-14 .250 (6.4) Mating Life 500 cycles minimum per MIL-DTL-26482 3.6.17 Salt Spray Unmated connectors and protective covers meet 48-hour exposure to MIL-STD-1344 Method 1001 per MIL-DTL-26482. (Cadmium plating) Olive drab/black zinc, electroless nickel meets 48-hour salt spray test, gray zinc nickel meets 500-hour salt spray test. Heat +221˚F (+105˚C) for 1,000 hours per MIL-DTL-26482 Chemical Resistance 20-hour full-immersion unmated in hydraulic fluid and lubricating oil per MIL-DTL-26482. Vibration 10 to 2,000Hz (15g’s) 10 microseconds maximum discontinuity. To MIL-STD-1344 Method 2005 per MIL-DTL-26482. Shock 50g’s, 11ms duration, three major axes. 10 microseconds maximum discontinuity. To MIL-STD-1344 Method 2004 per MIL-DTL-26482. Contact Type Solder, crimp, printed circuit, thermocouple, coax Number of Circuits PT: 1 to 61; PT-SE & PT-CE: 2 to 61 Contact Insertion (Crimp) Insertion from the rear of connector with simple hand-tool. Front release with appropriate extraction tool. Contact Retention 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I TECHNICAL SPECIFICATIONS To MIL-STD-1344 Method 2007 per MIL-DTL-26482. CONTACT SIZE 20 12 and 16 AXIAL LOAD MIN. LBS (NEWTONS) 15 (66.7) 25 (111.2) Polarization Five keyway, three-point bayonet with optional rotational polarization. a See pages 127, 129. Approvals • MIL-DTL-26482H • UL#E115497 (PT solder only) EXCERPT FROM MIL-DTL-26482H PIN = Part Identification Number For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 125 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I CREATE YOUR SOLDER PAR T NUMBER USING THESE SIX STEPS 1 2 3 4 5 MS3116º Fº 16-26 P W SHELL STYLE ENDBELL LAYOUT CONTACT ROTATION (military part number example) 1 2 3 4 5 6 PT06* E* 16-26 P W -SR SHELL STYLE ENDBELLS LAYOUT CONTACT ROTATION MODIFIER (commercial part number example) STEP 1: S E L E C T S H E L L ST Y L E, PL U G OR RECEP TACL E Mates with RECEPTACLES PT02E* MS3112E° PT07A* Jam Nut Receptacle Box Mount Receptacle PTB* Through Bulkhead Receptacle PLUGS PT06* MS3116° PT08E-SR* Right Angle Cable Plug PT05A = PT06 (less rear accessories) Cable Plug PT08front PT02front less rear accessories PT00* MS3110° PT01* MS3111° (less rear accessories) (less rear accessories) PT03A = PT00 Wall Mount Receptacle PT04A = PT01 Cable Mount Receptacle PT07* MS3114° PTBside PT06sid Jam Nut Receptacle STEP 2: S EL ECT END BEL L PT01side A* General-Duty Threaded E†† Environmental, No Clamp PART NUMBER KEY: Commercial=(*) Commercial & Military=(††) Military Only=(°) 126 A-(SR)* Non-Environmental with Clamp E-(SR)* F-military° Environmental with Clamp J†† PT07side Environmental with Clamp and Cable Jacket Gland Seal (Not available for PT07 shell style) W* Environmental without Clamp (Not available for PT07 Shell Style) For assistance in North America: +1 800.675.1214 • www.peigenesis.com • sales@peigenesis.com P†† Right Angle (for PT08P) PT08 PotSide Environmental Potting a See page 494 for epoxy potting compound.  SERVICE LAYOUT RATING TOTAL ROTATIONS CONTACTS 20 16 12 STEP 4: SELECT CONTACT COAX W X Y Z I 1 1 - - - - 6-1* 8-2†† I 2 2 58 122 - - 8-3†† I 3 3 60 210 - - 8-4†† I 4 4 45 97# 184# - 8-33* I 3 3 90 - - - 10-2* 8-98* I 3 3 - - - - I 2 2 45 90 315 10-5* I 5 45 151 180 270 10-6†† I 10-98†† I 5 6 6 3 3 12-4* I 4 4 38 - - - I 12-10†† I 12-14 A* I 14-4 AS* I 14-AA*u 14-5†† - - 180 - 8 8 90 112 203 292 10 10 60 155 270 295 14 14 - - - - 4 4 45 ­- - - I 4 4 45 ­- - - II 5 5 40 92 184 273 14-12†† I 12 8 4 43 90 - 14-15†† I 15 14 1 14-18†† I 18 18 15 90 180 270 14-19†† I 19 19 30 165 315 3 3 14-91* HV 5k 16-8†† II 8 16-23†† 23 I 16-26†† I 8 - 17 110 155 234 - 60 - - 54 152 180 331 22 1 158 270 - - 26 26 60 - 275 338 16-70 Coax 15 14 1 - - - - 16-99†† I 18-5* 18-11†† II 5 II 11 11 62 119 241 340 18-30†† I 30 29 1 180 193 285 350 18-32†† I 32 32 85 138 222 265 20-16†† II 16 16 238 318 333 347 20-24†† I 24 24 70 145 215 290 20-25* 20-27†† I 25 25 72 144 216 288 I 27 27 72 144 216 288 20-39†† I 39 37 2 63 144 252 333 20-41†† I 41 41 45 126 225 7 23 21 2 5 66 156 223 340 55 97 263 315 STEP 6: SELECT MODIFIER Default plating: Olive drab cadmium = F-Style Strain Relief (not military) = Black Anodized = Anodic Coating (Alumilite) = Olive Drab Chromate over Cadmium over Nickel (500-hour salt spray) 023* = Electroless Nickel (RoHS) 024* = Olive Drab Zinc Alloy 025* = Black Alloy (RoHS) 027* = Conductive Black Alloy (RoHS) 072 = Gray Zinc Nickel (RoHS) 424* = Electroless Nickel and Strain Relief (SR & 023) (RoHS) 466* = Olive Drab Zinc Alloy with Strain Relief (SR & 024) 470* = Black Alloy with Strain Relief (SR & 025) (RoHS) 476* = Conductive Black Alloy with Strain Relief (SR & 027) (RoHS) SCC* = Self-Closing Cap Box Mount (02) Shell sizes 8,10, 12 & 18 only SR* 002* 005* 014* - 20-90* HV 22-21†† II 7 45 135 225 315 21 21 16 135 175 349 22-32†† I 32 32 72 145 215 288 22-34* 22-36* I 34 34 62 142 218 298 I 36 36 72 144 216 288 22-41†† I 41 27 14 39 135 264 22-55†† I 55 55 30 142 226 314 24-31A* 24-61†† I 31 31 90 225 255 I 61 90 180 270 324 61 W, X, Y, Z 90 180 240 270 12-3 II 12-8†† See chart at left (Omit for normal) 6 6 90 - - - STEP 5: SELECT ROTATION - †† P = Pin S = Socket 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I STEP 3: S E L E C T L AY OU T - PART NUMBER KEY: Commercial=(*) Commercial & Military=(††) # = Commercial Rotation Only (Not Military) A = A-Class Only S = Socket Insert Only u = 14-AA Insert Follows 14-4 MIL-STD-1669A contact spacing For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 127 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I CREATE YOUR CRIMP PAR T NUMBER USING THESE SIX STEPS 1 2 3 4 5 MS3126º Fº 16-26 P W SHELL STYLE FINISH LAYOUT CONTACT ROTATION (military part number example) 1 2 3 4 5 6 PT06* SE* 16-26 P W -SR SHELL STYLE ENDBELLS LAYOUT CONTACT ROTATION MODIFIER (commercial part number example) STEP 1: S E L E C T S H E L L ST Y L E, PL U G OR RECEP TACL E Mates with RECEPTACLES PLUGS less rear accessories PT02SE* PT02CE MS3122E° Box Mount Receptacle PT00* MS3120° PT06* MS3126° (less rear accessories) (less rear accessories) PT03SE = PT00SE PT08SE-SR* Right Angle Cable Plug PT05SE = PT06SE Wall Mount Receptacle Cable Plug PT08front PT06front PT02front PT01* MS3121° PT04SE = PT01SE (less rear accessories) PT07* MS3124° Jam Nut Receptacle Cable Mount Receptacle STEP 2: SEL ECT END BEL L SE* E° Environmental No Clamp CE†† Proprietary SE-(SR)* CE-(SR)†† SP* CP†† P° Add SR modifier to end of part number to call out the F-style endbell Environmental Potting a See page 494 for epoxy potting compound. F° Environmental with Clamp Right Angle (for PT08SP) PART NUMBER KEY: SE=(*) CE=(††) Military=(°) PT08 PotSide 128 For assistance in North America: +1 800.675.1214 • www.peigenesis.com • sales@peigenesis.com STEP 3: S E L E C T L AY OU T LAYOUT SERVICE RATING TOTAL 8-2†† I 2 8-3†† I 8-4†† I 8-33*° 10-6††*° CONTACTS 20 16 12 12 COAX STEP 4: SELECT CONTACT INSERT ROTATIONS 8 COAX W X Y Z 2 58 122 - - 3 3 60 210 - - 4 4 45 97# 184# - I 3 3 90 - - - I 6 6 90 - - - 6 90 180 240 270 - - 180 - 10-98†† I 6 12-3††*° II 3 12-8††*° I 8 8 90 112 203 292 12-10††*° I 10 10 60 155 270 295 3 14-5††*° II 5 5 40 92 184 273 14-12††*° I 12 8 4 43 90 - - 14-15††*° I 15 14 1 17 110 155 234 14-18††*° I 18 18 15 90 180 270 14-19††*° I 19 19 30 165 315 - 14-22* I 5 1 45 - - - 3 14-91* HV 5k 3 16-8††*° II 8 16-23††*° I 23 22 16-26††*° I 26 26 16-76* Coax 14 8 23 21 16-99*° I 18-5††* II 5 18-11††* II 11 18-30††*° I 30 29 18-32††*° I 32 32 18-80†† I/Coax 8 6 18-91††* HV 5k 6 6 20-16††*° II 16 20-27†† I 27 27 20-39††*° I 39 37 20-41††*° I 41 41 22-7* Coax 7 22-21††*° II 21 4 - 60 - - 8 54 152 180 331 1 158 270 - - 60 - 275 338 1 5 2 5 - - - - 66 156 223 340 55 97 263 315 11 62 119 241 340 1 180 193 285 350 85 138 222 265 45 90 135 160 90 180 240 270 238 318 333 347 72 144 216 288 63 144 252 333 45 126 225 - 19 41 - - 21 16 135 175 349 25 2 16 2 7 22-25* I 25 60 125 211 336 22-32†† I 32 32 72 145 215 288 22-34†† I 34 34 62 142 218 298 22-36†† I 36 36 72 144 216 288 22-41††*° I 41 27 39 135 264 - 22-55††*° I 55 55 30 142 226 314 22-78* Coax 7 19 41 - - 14 7 22-96* II 7 19 41 - 24-31†† I 31 31 7 90 225 255 - 24-38 I 38 38 85 138 222 265 24-51* I/Coax 51 47 22 171 313 - 24-61††*° I 61 61 90 180 270 324 4 P = Pin S = Socket STEP 5: SELECT ROTATION See chart at left (Omit for normal) W, X, Y, Z STEP 6: SELECT MODIFIER Default plating: Olive Drab Cadmium = F-Style Strain Relief not military) = Black Anodized = Anodic Coating (Alumilite) = Olive Drab Chromate over Cadmium over Nickel (500-hour salt spray, call for details) 023* = Electroless Nickel (RoHS) 024* = Olive Drab Zinc Alloy 025* = Non-Conductive Black Zinc Black Alloy SR* 002* 005* 014* 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I CREATE YOUR CRIMP PAR T NUMBER USING THESE SIX STEPS (RoHS) 027* = Conductive Black Alloy (RoHS) 072 = Gray Zinc Nickel (RoHS) 424* = Electroless Nickel and Strain Relief (SR & 023) (RoHS) 466* = Olive Drab Alloy with Strain Relief (SR & 024) 470* = Black Alloy with Strain Relief (SR & 025) (RoHS) 476* = Conductive Black Alloy with Strain Relief (SR & 027) (RoHS) SCC* = Self-Closing Cap Box Mount (02) Shell sizes 8,10, 12 & 18 only LC = Less Contacts PART NUMBER KEY: SE=(*) CE=(††) Military=(°) # = Commercial Rotation Only (Not Military) For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 129 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I LAYOUTS BY NUMBER OF CONTACTS CONTACT LEGEND = 20 =16 Mating face view of pin inserts CONTACTS =HV =12 1 = Solder: Military & PT n = PT-CE G = Crimp:  Military & PT-SE S = Socket only 3 2 4 D A C B B A SHELL SIZE/LAYOUT 6-1 # OF CONTACTS 1-#20 SERIES s SERVICE RATING I 8-2 2-#20 n I 10-2 8-3 2 #16 s I 8-33 8-98 12-3 14-91 3-#20 3-#20 3-#20 3-#16 n G s s nG I I I II 3-HV s HV5k 8-4 12-4 4-#20 n I 14-4S 4-#16 s I 5 4 CONTACTS 4-#12 s I 6 8-4 12-4 14-4 6-1 8-3 8-38-33 8-3 8-3 8-98 8-33 SHELL SIZE/LAYOUT 14-AAU 18-76 10-5 # OF CONTACTS 4-#12 4(coax) 5-#20 SERIES s n s SERVICE RATING I (coax) I 14-5 20-90 # OF CONTACTS 7-HV SERIES s SERVICE RATING I 14-91 14-91 12-3 14-91 14-22 14-91 18-5 4-#12; 1-#20 n G F II I 22-7 10-6 10-98 18-91 5-#12 n F s 6-#20 6-#20 n I I 18-80 2-#20; 7(coax) n (coax) 12-14 # OF CONTACTS 14-#20 SERIES s SERVICE RATING I 16-76 12-10 10-#20 nG I 14-15 8-#16 nG nG I I 12 18-11 14-12 11-#16 4-#16; 8-#20 nG nG II 16 16-70 16-8 8-#20 11 15 20-70 12-8 7-#12 F I 10 14 CONTACTS 22-96 7(coax) F HV5k 22-71 nF HV5k 8 9 # OF CONTACTS 6-#20; 2(coax) SERIES n SERVICE RATING II/(coax) 6-HV nG II 22-78 7(coax) F II 8 SHELL SIZE/LAYOUT SHELL SIZE/LAYOUT 12-3 12-3 14-91 7 CONTACTS 8-33 8-3 8-33 8-338-988-9812-3 8-98 8-98 12-3 5-#16 CONTACTS SHELL SIZE/LAYOUT 130 SERIES LEGEND s = PT-Solder F = PT-SE Crimp U = 14-44 =coax 20-16 I 18 14-18 5-#12; 10-#20; 4(coax) 1-#16; 1-#12(coax); 16-#16 18-#20 8-#20; 1(coax) 14-#20 14-#20 F n nG n s nG nG Size 12 (coax) I II not rated I I User-Defined For assistance in North America: +1 800.675.1214 • www.peigenesis.com • sales@peigenesis.com 18-76 CONTACT LEGEND = 20 =16 Mating face view of pin inserts CONTACTS SHELL SIZE/LAYOUT =12 SHELL SIZE/LAYOUT =coax SERIES LEGEND s = PT-Solder = Solder: Military & PT n = PT-CE F = PT-SE Crimp G = Crimp:  Military & PT-SE 21 19 14-19 23 22-21 # OF CONTACTS 19-#20 SERIES nG SERVICE RATING I CONTACTS =HV 21-#16 nG II 26 25 22-25 16-99 38 39 36 D T U F CONTACTS 41 HELL SIZE/LAYOUT S 20-41 # OF CONTACTS 41-#20 SERIES nG SERVICE RATING I 51 22-41 14-#16; 27-#20 nG I 24-51 4-#12(coax); 47-#20 F I I P e f g n p h m q k i W 22-34 ns R S V E 34-#20 n s I 24-31 31-#16 C 22-32 I 1-#16; 29-#20 nG I A 32-#20 n I s 31 B HELL SIZE/LAYOUT S 18-32 # OF CONTACTS 32-#20 SERIES nG SERVICE RATING I 25-#20 18-30 27-#20 nF I 34 20-25 24-#20 I 30 20-27 26-#20 nG I 32 20-24 2-#16; 21-#20 G I 27 16-26 # OF CONTACTS 25-#16 SERIES F SERVICE RATING I CONTACTS 16-23 1-#16; 22-#20 nG I 25 24 22-36 j X G Y Z H 24-38 36-#20 n s I 38-#16 F I 55 22-55 24-38 55-#20 nG I 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I LAYOUTS BY NUMBER OF CONTACTS N d c b M L K a J 20-39 2-#16 37-#20 nG I 61 24-61 61-#20 nG I 22-55 For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 131 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I PIN & SOCKET CRIMP CONTACTS CONTACT & WIRE SIZE WIRE STRIP LENGTH PIN CONTACT & COLOR BANDS WIRE SEALING RANGE PIN WIRE CONTACT WIRE COLOR BANDS WIRE SEALING RANGE CONTACT SIZE PART STRIP SIZE AWG NUMBER 1 2 3 LENGTH MIN. MAX. SE CRIMP CONTACTS 20 20-24 M39029/31-240 Red Yellow Black .275 (7.0) .047 (1.2) .083 (2.1) 16 16-20 M39029/31-228 Red Red Grey .250 (6.4) .066 (1.7) .109 (2.7) 12 12-14 M39029/31-235 Red Orange Green .250 (6.4) .097 (2.5) .142 (3.6) 20 Chromel 20-24 10-330940-01P - - - 20 Alumel 20-24 10-330940-02P - - 20 Iron 20-24 10-330940-03P - - - .250 (6.4) .047 (1.2) - 20 Constantan 20-24 10-330940-04P - - - 20 20-24 10-189000-20F - - - .275 (7.0) .047 (1.2) .083 (2.1) 20 16-20 10-195962-20F - - - .275 (7.0) .047 (1.2) .083 (2.1) 16 16-20 10-189004-16F - - - .250 (6.4) .066 (1.7) .109 (2.7) 20 Chromel 20-24 10-252900-01P - - - 20 Alumel 20-24 10-252900-02P - - 20 Iron 20-24 10-252900-03P - - - .275 (7.0) .047 (1.2) - 20 Constantan 20-24 10-252900-04P - - - CONTACT & WIRE SIZE CE CRIMP CONTACTS WIRE STRIP LENGTH SOCKET CONTACT & COLOR BANDS .083 (2.1) .083 (2.1) WIRE SEALING RANGE SOCKET WIRE SEALING RANGE COLOR BANDS WIRE CONTACT WIRE CONTACT SIZE PART STRIP SIZE AWG NUMBER 1 2 3 LENGTH MIN. MAX. SE CRIMP CONTACTS 20 20-24 M39029/32-259 Red Green White .275 (7.0) .047 (1.2) .083 (2.1) 16 16-20 M39029/32-247 Red Yellow Violet .250 (6.4) .066 (1.7) .109 (2.7) 12 12-14 M39029/32-254 Red Green Yellow .250 (6.4) .097 (2.5) .142 (3.6) 20 Chromel 20-24 10-330940-01S - - - 20 Alumel 20-24 10-330940-02S - - 20 Iron 20-24 10-330940-03S - - - .047 (1.2) .250 (6.4) - 20 Constantan 20-24 10-330940-04S - - - 20 20-24 10-597817-351 - - - .275 (7.0) .047 (1.2) .083 (2.1) 20 16-20 10-195963-20F - - - .275 (7.0) .047 (1.2) .083 (2.1) 16 16-20 10-189006-16F - - - .250 (6.4) .066 (1.7) .109 (2.7) 20 Chromel 20-24 10-252900-01S - - - 20 Alumel 20-24 10-252900-02S - - 20 Iron 20-24 10-252900-03S - - - .047 (1.2) .275 (7.0) - 20 Constantan 20-24 10-252900-04S - - - .083 (2.1) CE CRIMP CONTACTS All dimensions in inches (millimeters in parenthesis) 132 For assistance in North America: +1 800.675.1214 • www.peigenesis.com • sales@peigenesis.com .083 (2.1) WIRE HOLE FILLER INSERTION TOOL CRIMP TOOLS TH1A WA27F M22520/1-01 PART NUMBER COLOR HAND- CRIMP TOOL EXTRACTION TOOL M22520/1-02 POWER- CRIMP TURRET TOOL HEAD COLOR USE INSERTION EXTRACTION LOCATOR TOOL TOOL SE CRIMP CONTACTS MS27488-20-2 Red Red M81969/17-03 M81969/19-07 MS27488-16-2 Blue Blue M81969/17-04 M81969/19-08 MS27488-12-2 Yellow Yellow M81969/17-05 M81969/19-09 TH1A or AF8 or WA27F* Red M22520/1-02 M22520/1-01 MS27488-20-2 M81969/17-03 Red M81969/19-07 Red 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I PIN & SOCKET CRIMP CONTACTS CE CRIMP CONTACTS MS27488-20-2 Red Red 11-6782 MS27488-20-2 Red Red 11-6782 MS27488-16-2 Blue Blue 11-6781 AF8 or Red Red TH254 11-6900 WA27F* M22520/1-01 Red MS27488-20-2 Red 11-6782 WIRE HOLE FILLER CRIMP TOOLS AF8 HAND- CRIMP TOOL EXTRACTION TOOL TH1A WA27F M22520/1-01 PART NUMBER COLOR INSERTION TOOL M22520/1-02 POWER- CRIMP TURRET TOOL HEAD COLOR USE INSERTION EXTRACTION LOCATOR TOOL TOOL SE CRIMP CONTACTS MS27488-20-2 Red Red M81969/17-03 M81969/19-07 MS27488-16-2 Blue Blue M81969/17-04 M81969/19-08 MS27488-12-2 Yellow Yellow M81969/17-05 TH1A or AF8 or Red WA27F* M22520/1-02 M22520/1-01 MS27488-20-2 M81969/17-03 Red Red M81969/19-09 M81969/19-07 CE CRIMP CONTACTS MS27488-20-2 Red Red 11-6782 MS27488-20-2 Red Red 11-6782 MS27488-16-2 Blue Blue 11-6781 AF8 or Red Red TH254 WA27F* M22520/1-01 Red MS27488-20-2 Red 11-6782 11-6900 *Contact us for more tool accessories. For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 133 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I PIN & SOCKET SOLDER COAX CONTACTS CONTACT PART # CABLE PIN OUTER SHELL CRIMP FERRULE FITS IN SHELL SIZE SOCKET MIL-C_22520/5-01 USE WITH DIE PART # (LOCATOR CAVITY) MIL-C22520/10-01 USE WITH DIE PART# (LOCATOR CAVITY CLAMP NUT WRENCH CONTACT SIZE 12 RG-161/U RG-174A/U M22520/5-03 (A) RG-179B/U 21-033020-032 RG-187A/U 21-033019-032 RG-188A/U M22520/5-08 (A) 10-18 RG-316/U RG-196A/U 21-033020-031+ 21-033061-031+ "Thermatics 2929-29” 21-033020-033 21-033061-033 M22520/10-05 (A) M22520/5-35 (B) M22520/5-03 (B) M22520/5-33 (B) 11-8676-1 M22520/10-05 (B) M22520/5-37 (B) CONTACT SIZE 8 RG-58C/U RG-141A/U 21-033020-002 21-033019-002 21-033020-003 21-033019-003 21-033020-007* 21-033019-007* 21-033020-004 21-033019-004 RG-195A/U 21-033020-005* 21-033019-005* Raychem - 5021D1331-9 21-033020-006* 21-033019-006* 21-033020-001 21-033019-001 RG-303/U M22520/5-05 (B) M22520/5-41 (B) M22520/10-07 (B) 11-8676-2 - 11-8676-3 - 11-8676-2 M22520/10-05 (B) 11-8676-2 M22520/10-07 (B) 11-8676-2 M22520/10-07 (B) 11-8676-2 - 11-8676-3 RG-59B/U RG-62A/U RG-62B/U M22520/5-45 (B) RG-210/U RG-142B/U Times MI51115 RG-178B/U RG-180B/U Raychem - 5022D1312-9 10-18 M22520/5-03 (B) M22520/5-33 (B) M22520/5-05 (B) M22520/5-41 (B) M22520/5-05 (B) M22520/5-41 (B) RG-59B/U RG-62A/U RG-62B/U M22520/5-43 (B) 20-24 M22520/5-45 (B) RG-210/U Note: Solder contacts are supplied with outer contact body bonded into the insert (insulator). Contact us for wire strip lengths and assembly instructions Please check availability + Only mate with one another * CRIMP (PT-SE) Note: Illustrations are for chart on SOCKET PTCoaxSolder.ai SOCKET PTSECoaxSkt SOCKET PIN PIN SOCKET PTCoaxSolder.ai Note: Illustrations are for chart above. 134 SOCKET PIN PIN PIN PTSECoaxPin.ai SOLDER (PT) a page 135. For assistance in North America: +1 800.675.1214 • www.peigenesis.com • sales@peigenesis.com INNER SOLDER CONTACT CABLE PINS .00005 GOLD OVER SILVER .00010 GOLD OVER COPPER SOCKET .00005 GOLD OVER SILVER .00010 GOLD OVER COPPER HAND-CRIMP TOOL OUTER SHELL MIL-C22520/5-01 USE WITH DIE PART # (LOCATOR CAVITY) MIL-C22520/10-01 CLAMP NUT WRENCH 11-8676-1 USE WITH DIE PART # (LOCATOR CAVITY) INSERTION TOOL EXTRACTION TOOL CONTACT SIZE 12 RG-161/U RG-174A/U RG-179B/U RG-187A/U RG-188A/U RG-316/U 21-033012-001 21-033012-004 21-033038-001 21-033038-004 21-033011-001 21-033011-004 21-033037-001 21-033037-004 - M22520/10-05 (A) RG-178B/U RG-196A/U 21-033012-003* 21-033012-005 21-033038-003* 21-033038-005 21-033011-003* 21-033011-005 21-033037-003* 21-033037-005 - M22520/10-05 (A) 21-033012-006* 21-033012-007 21-033038-006* 21-033038-007 21-033011-006* 21-033011-007 21-033037-006* 21-033037-007 M22520/5-37 (B) - 11-8676-1 11-8369-2 11-7880-12 11-8660-2 11-8154-2 N/A 21-033012-043 N/A 21-033038-043 N/A 21-033011-043 N/A 21-033037-043 - M22520/10-05 (B) 11-8676-1 11-8369-1 11-7880-12 11-8660-1 11-8154-2 RG-188 or RG-316 Double Braid Westrex 199-49-1 Tensolite 30850/87T-1 11-8676-1 11-8369-2 11-7880-12 11-8660-2 11-8154-2 11-8369-1 11-7880-12 11-8660-1 11-8154-2 CONTACT SIZE 8 RG-55B/U RG-142A/U RG-142B/U RG-223/U RG-58C/U RG-141A/U RG-303/U RG-59B/U RG-62A/U RG-62B/U RG-210/U RG-140/U RG-302/U RG-161/U RG-174A/U RG-179B/U RG-187A/U RG-188A/U RG-316/U RG-178B/U RG-196A/U 21-033012-21 21-033012-25 21-033038-21 21-033038-25 21-033011-21 21-033011-25 21-033037-21 21-033037-25 - M22520/10-07 (A) 11-8676-2 11-8369-5 11-8660-5 11-7880-8 11-8154-1 21-033012-022 21-033012-026 21-033038-022* 21-033038-026* 21-033011-022 21-033011-026 21-033037-022 21-033037-026* - M22520/10-07 (B) 11-8676-2 11-8369-4 11-8660-4 11-7880-8 11-8154-1 N/A 21-033012-036 N/A 21-033038-036* N/A 21-033011-036 N/A 21-033037-036 M22520/5-45 (B) - 11-8676-2 11-8369-5 11-8660-5 11-7880-8 11-8154-1 N/A 21-033012-037* N/A 21-033038-037* N/A 21-033011-037* N/A 21-033037-037* - M22520/10-07 (A) 11-8369-5 11-8660-5 11-7880-8 11-8154-1 21-033012-034 21-033012-030 21-033038-034 21-033038-030 21-033011-034 21-033011-030 21-033037-034 21-033037-030 - M22520/10-05 (A) 11-8676-2 11-8369-2 11-8660-2 11-7880-8 11-8154-1 21-033012-035 N/A 21-033038-035 N/A 21-033011-035 N/A 21-033037-035 N/A - M22520/10-05 (A) 11-8676-2 11-8369-1 11-8660-1 11-7880-8 11-8154-1 - M22520/10-07 (B) 11-8676-2 11-8369-4 11-7880-8 11-8660-4 11-8154-1 11-8660-5 11-8154-1 11-8660-4 11-8154-1 11-8369-4 11-7880-8 11-8660-4 11-8154-1 11-8369-4 11-7880-8 11-8660-4 11-8154-1 11-8660-4 11-8154-1 11-8660-2 11-8154-1 RG-180B/U N/A N/A 21-033011-024 21-033037-024 RG-195A/U 21-033012-046* 21-033038-046* 21-033011-046* 21-033037-046* 50C25ADS1 21-033012-044 21-033038-044* 21-033011-044 21-033037-044* Double Braid N/A N/A N/A N/A 21-033012-023 21-033038-023* 21-033011-023 21-033037-023* 21-033012-027 21-033038-027 21-033011-027 21-033037-027 Thermax RG-195 RG-122/U Tyco 5022E5111 N/A 21-033012-028 N/A 21-033038-028* N/A 21-033011-028 N/A 21-033037-028* Tyco 21-033012-031 21-033038-031 21-033011-031 21-033037-031 9530D5314 N/A N/A N/A N/A 9527A1317 21-033012-039 21-033038-039* 21-033011-039 21-033037-039* 7527A1318 21-033012-040* 21-033038-040* 21-033011-040 21-033037-040* Tyco Tyco N/A N/A N/A N/A N/A N/A N/A N/A M22520/05-37 (B) - 11-8676-2 11-8676-2 M22520/05-43 (B) - 11-8676-2 - M22520/10-07 (B) 11-8676-2 - M22520/10-07 (B) 11-8676-2 - M22520/10-07 (B) M22520/10-05 (A) 11-8676-2 11-8676-2 11-8369-5 11-8369-4 11-8369-4 11-8369-2 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I PIN & SOCKET SE CRIMP COAX CONTACTS 11-7880-8 11-7880-8 11-7880-8 11-7880-8 Italicized = Matched impedance contacts. *Contact us for availability. Availability of coax contacts varies widely. Contact us for strip lengths and assembly instructions. For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 135 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I COMPONENTS PLUGS PT RECEPTACLES PTSE PT O-Ring Barrel/Shell Wave Spring Coupling Nut Insert/Insulator Contacts Wire Sealing Grommet Ferrule/ Compression Ring Endbell/ Cable Clamp 136 For assistance in North America: +1 800.675.1214 • www.peigenesis.com • sales@peigenesis.com PTSE PRINTED CIRCUIT BOARD BOX MOUNT PT02 JAM NUT PT07 PT02PCB PT07PCB S1 R1 BOX MOUNT PART NUMBER SHELL PT02 WITH M SIZE PCB CONTACTS N +.001 P R S T L -.055 MAX. KK DIA. MAX. Y +.040 -.050 X +.040 -.050 6 71-570120* 0.431 0.348 0.062 0.469 0.688 0.120 0.774 0.323 0.380 0.661 (10.9) (8.8) (1.6) (11.9) (17.5) (3.0) (19.7) (8.2) (9.7) (16.8) 8 71-570121* 0.431 0.473 0.062 0.594 0.812 0.120 0.774 0.449 0.380 0.661 (10.9) (12.0) (1.6) (15.1) (20.6) (3.0) (19.7) (11.4) (9.7) (16.8) 10 71-570122* 12 71-570123* 14 71-570124* 16 71-570125* 18 71-570126* 20 71-570127* 22 71-570128* 24 71-570129* 0.431 0.590 0.062 0.719 0.938 0.120 0.774 0.573 0.380 0.661 (10.9) (15.0) (1.6) (18.3) (23.8) (3.0) (19.7) (14.6) (9.7) (16.8) 0.431 0.750 0.062 0.812 1.031 0.120 0.774 0.699 0.380 0.661 (10.9) (19.1) (1.6) (20.6) (26.2) (3.0) (19.7) (17.8) (9.7) (16.8) 0.431 0.875 0.062 0.906 1.125 0.120 0.774 0.823 0.380 0.661 (10.9) (22.2) (1.6) (23.0) (28.6) (3.0) (19.7) (20.9) (9.7) (16.8) PT07front 0.431 1.000 0.062 0.969 1.219 0.120 0.774 0.949 0.380 0.661 (10.9) (25.4) (1.6) (24.6) (31.0) (3.0) (19.7) (24.1) (9.7) (16.8) 0.431 1.125 0.062 1.062 1.312 0.120 0.774 1.073 0.380 0.661 (10.9) (28.6) (1.6) (27.0) (33.3) (3.0) (19.7) (27.3) (9.7) (16.8) 0.556 1.250 0.094 1.156 1.438 0.120 1.025 1.199 0.286 0.661 (14.1) (31.8) (2.4) (29.4) (36.5) (3.0) (26.0) (30.5) (7.3) (16.8) 0.556 1.375 0.094 1.250 1.561 0.120 1.025 1.323 0.286 0.661 (14.1) (34.9) (2.4) (31.8) (39.6) (3.0) (26.0) (33.6) (7.3) (16.8) 0.589 1.500 0.094 1.375 1.688 0.147 1.058 1.449 0.253 0.628 (14.9) (38.1) (2.4) (34.9) (42.9) (3.7) (26.9) (36.8) (6.4) (16.0) 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I HOW-TO-ORDER PCB TYPES JAM NUT PART NUMBER PT07 B THREAD SHELL WITH PCB CLASS 2A M1 SIZE CONTACTS UNEF PANEL THICKNESS N +.001 P1 R1 S1 L1 Y1 -.055 MIN. MAX. X1 6 71-533720* 0.4375-28 0.696 0.348 0.125 0.625 0.812 0.062 0.125 0.821 0.376 0.501 (17.7) (8.8) (3.2) (15.9) (20.6) (1.6) (3.2) (20.9) (9.6) (12.7) 8 71-533721* 0.5625-24 0.696 0.473 0.125 0.750 0.938 0.062 0.125 0.821 0.376 0.501 (17.7) (12.0) (3.2) (19.1) (23.8) (1.6) (3.2) (20.9) (9.6) (12.7) 10 71-533722* 0.6875-24 0.696 0.590 0.125 0.875 1.062 0.062 0.125 0.821 0.376 0.501 (17.7) (15.0) (3.2) (22.2) (27.0) (1.6) (3.2) (20.9) (9.6) (12.7) 12 71-533723* 0.8750-20 0.696 0.750 0.125 1.062 1.250 0.062 0.125 0.821 0.376 0.501 (17.7) (19.1) (3.2) (27.0) (31.8) (1.6) (3.2) (20.9) (9.6) (12.7) 14 71-533724* 1.0000-20 0.696 0.875 0.125 1.188 1.375 0.062 0.125 0.821 0.376 0.501 (17.7) (22.2) (3.2) (30.2) (34.9) (1.6) (3.2) (20.9) (9.6) (12.7) 16 71-533725* 1.1250-18 0.696 1.000 0.125 1.312 1.500 0.062 0.125 0.821 0.376 0.501 (17.7) (25.4) (3.2) (33.3) (38.1) (1.6) (3.2) (20.9) (9.6) (12.7) 18 71-533726* 1.2500-18 0.696 1.125 0.125 1.438 1.625 0.062 0.125 0.821 0.376 0.501 (17.7) (28.6) (3.2) (36.5) (41.3) (1.6) (3.2) (20.9) (9.6) (12.7) 20 71-533727* 1.3750-18 0.884 1.250 0.156 1.562 1.812 0.062 0.250 1.040 0.367 0.523 (22.5) (31.8) (4.0) (39.7) (46.0) (1.6) (6.4) (26.4) (9.3) (13.3) 22 71-533728* 1.5000-18 0.884 1.375 0.156 1.688 1.938 0.062 0.250 1.040 0.367 0.523 (22.5) (34.9) (4.0) (42.9) (49.2) (1.6) (6.4) (26.4) (9.3) (13.3) 24 71-533729* 1.6250-18 0.917 1.500 0.156 1.812 2.062 0.062 0.250 1.073 0.334 0.490 (23.3) (38.1) (4.0) (46.1) (52.4) (1.6) (6.4) (27.2) (8.5) (12.4) Part number prefix codes: 58 = Conductive Black Alloy (027) RoHS 71 = Olive Drab Chromate over Cadmium (typical) 72 = Anodic Coating (005) 91 = Electroless Nickel (023) RoHS 93 = Non-Conductive Black Alloy (025) RoHS FL = Grey Zinc Nickel (072) RoHS *See a pagee 127, 129 for insert arrangement (layout) codes. For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 137 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I DIMENSIONS RECEPTACLE STYLES PT00 PT03 MS3110 MS3120 PT01 PT04 MS3111 MS3121 P M P M 1 B PT02 MS3112 MS3122 M PT00/PT02/PTB M N MS31_0 SHELL +.010 +.001 MS31_2 MS31_1 M1 SIZE -.000 -.005 P P MAX. Q. R 0.469 0.688 0.120 6 0.431 0.348 0.062 0.093 0.400 0.812 L4 L3 L2 PT01  N KK N L1 PT00/PT02/PTB P B N N PTB S T PT00 L1 MAX. PTB PT00/PT01 L4 MAX. B L2 THREAD MAX. CLASS 2A PT02 KK L3 DIA. MAX. MAX. 1.050 0.906 .3125-32 (11.9) (3.0) 0.906 (23.0) 0.825 0.323 (10.9) (8.8) (1.6) (2.4) (10.1) (20.6) (21.0) (8.2) (26.7) (23.0) 8 0.431 0.473 0.062 0.093 0.400 0.938 0.594 0.812 0.120 0.906 0.825 0.449 1.050 0.906 .4375-28 (10.9) (12.0) (1.6) (2.4) (10.1) (23.8) (15.1) (3.0) (23.0) (21.0) (11.4) (26.7) (23.0) 10 0.431 0.590 0.062 0.093 0.400 1.062 0.719 0.938 0.120 0.906 0.825 0.573 1.050 0.906 .5625-24 (10.9) (15.0) (1.6) (2.4) (10.1) (27.0) (18.3) (3.0) (23.0) (21.0) (14.6) (26.7) (23.0) 12 0.431 0.750 0.062 0.093 0.400 1.156 0.812 1.031 0.120 0.906 0.825 0.699 1.050 0.906 .6875-24 (10.9) (19.1) (1.6) (2.4) (10.1) (29.4) (20.6) (3.0) (23.0) (21.0) (17.8) (26.7) (23.0) 14 0.431 0.875 0.062 0.093 0.400 1.250 0.906 1.125 0.120 0.906 0.825 0.823 1.050 0.906 .8125-20 (10.9) (22.2) (1.6) (2.4) (10.1) (31.8) (23.0) (3.0) (23.0) (21.0) (20.9) (26.7) (23.0) 16 0.431 1.000 0.062 0.093 0.400 1.344 0.969 1.219 0.120 0.906 0.825 0.949 1.050 0.906 .9375-20 (10.9) (25.4) (1.6) (2.4) (10.1) (34.1) (24.6) (3.0) (23.0) (21.0) (24.1) (26.7) 1.062 1.312 0.120 PT00side 0.906 0.825 PT01side 1.073 1.050 (23.0) 18 0.431 1.125 0.062 0.093 0.400 1.438 (17.5) (20.6) (23.8) (26.2) (28.6) (31.0) UNEF NEF NEF UNEF UNEF (3.0) (23.0) (21.0) (27.3) (26.7) 0.906 1.0625-18 PT02side (23.0) NEF 20 0.556 1.250 0.094 0.115 0.535 1.562 1.156 1.438 0.120 1.125 1.076 1.199 1.330 1.125 1.1875-18 (14.1) (31.8) (2.4) (2.9) (13.6) (39.7) (29.4) (3.0) (28.6) (27.3) (30.5) (33.8) (28.6) 22 0.556 1.375 0.094 0.115 0.535 1.688 1.250 1.562 0.120 1.125 1.076 1.323 1.330 1.125 1.3125-18 (14.1) (34.9) (2.4) (2.9) (13.6) (42.9) (31.8) (3.0) (28.6) (27.3) (33.6) (33.8) (28.6) 24 0.589 1.500 0.094 0.115 0.568 1.812 1.375 1.688 0.147 1.188 1.109 1.449 1.330 1.188 1.4375-18 (14.9) (38.1) (2.4) (2.9) (14.4) (46.0) (34.9) (30.2) (28.2) (36.8) (33.8) (30.2) (10.9) (28.6) (1.6) (2.4) (10.1) (36.5) (27.0) (33.3) (36.5) (39.6) (42.9) (3.7) All dimensions in inches (millimeters in parenthesis) 138 NEF For assistance in North America: +1 800.675.1214 • www.peigenesis.com • sales@peigenesis.com NEF NEF NEF 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I DIMENSIONS ENDBELL STYLES A F/SR E P B Thread F F KK L1 L2 G F L4 L3 J W XX XX XL L5 A ENDBELL E ENDBELL B SHELL F L1 THREAD L2 KK SIZE MAX. CLASS 2A MAX. F G L3 MAX. A Endbell - - 6 0.175 1.553 .3750-32 1.266 (4.4) (39.4) NEF (32.2) (11.2) 8 0.297 1.553 .5000-28 - - 1.266 0.560 (7.5) (39.4) UNEF 0.240 0.125 (32.2) (14.2) 10 0.421 1.553 .6250-24 (6.1) (3.2) 1.266 0.685 (10.7) (39.4) NEF 0.302 (32.2) (17.3) 12 0.546 1.553 .7500-20 1.266 0.813 (13.9) (39.4) UNEF (32.2) (20.7) 14 0.663 1.553 .8750-20 1.266 0.930 (16.8) (39.4) UNEF (32.2) (23.6) 16 0.787 1.553 1.0000-20 1.266 (20.0) (39.4) UNEF 1.430 (38.5) (36.3) 24 1.259 1.765 1.4375-18 1.578 (32.0) (44.8) NEF 1.301 (38.5) (33.0) 22 1.135 1.703 1.4375-18 1.516 (28.8) (43.3) NEF 1.175 (32.2) (29.8) 20 1.041 1.703 1.1875-18 1.516 (26.4) (43.3) NEF 1.057 (32.2) (26.8) 18 0.879 1.553 1.1875-18 1.266 (22.3) (39.4) NEF 0.440 1.555 (40.1) (39.5) P ENDBELL F/SR ENDBELL F W  J  W/J ENDBELL L4 MAX. L5 XX XX XL MAX. MIN. MAX. - - - - endbell 1.438ESE - - - - - 0.192 - (4.9) (36.5) 1.922 0.317 1.438 (48.8) (8.1) (36.5) 0.188 1.922 0.434 1.438 (7.7) (4.8) (48.8) (11.0) (36.5) 0.428 0.312 1.922 0.548 1.438 (10.9) (7.9) (48.8) (13.9) (36.5) 0.552 0.375 1.922 0.673 1.438 (14.0) (9.5) (48.8) (17.1) (36.5) 0.615 0.500 2.047 0.798 1.438 (15.6) (12.7) (52.0) (20.3) Jendbell (36.5) 0.740 0.625 2.078 0.899 1.438 (18.8) (15.9) (52.8) (22.8) (36.5) 0.740 0.625 2.344 1.024 1.656 (18.8) (15.9) (59.5) (26.0) (42.1) 0.928 0.750 2.344 1.149 1.656 (23.6) (19.1) (59.5) (29.2) (42.1) 0.990 0.800 2.406 1.274 1.717 (25.1) (20.3) (61.1) (32.4) (43.6) FSE endbell 1.705 2.271 0.168 0.230 (43.3) (57.7) (4.3) (5.8) 1.705 2.271 0.205 0.312 (43.3) (57.7) (5.2) (7.9) 1.848 2.411 0.338 0.442 (46.9) (61.2) (8.6) (11.2) 2.040 2.599 0.416 0.539 (51.8) (66.0) (10.6) (13.7) 2.256 2.943 0.550 0.616 (57.3) (74.8) (14.0) (15.6) 2.486 3.172 0.600 0.672 (63.1) (80.6) (15.2) (17.1) 2.922 3.610 0.635 0.747 (74.2) (91.7) (16.1) (19.0) 3.086 3.766 0.670 0.846 (78.4) (95.7) (17.0) (21.5) 3.310 3.985 0.740 0.894 (84.1) (101.2) (18.8) (22.7) All dimensions in inches (millimeters in parenthesis) For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 139 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I DIMENSIONS STRAIGHT PLUGS PT06 PT05 MS3116 MS3126 Q PT06E-SR PT06SE-SR PT06CE-SR MS3116F MS3126F PT06E MS3116E MS3126E PT06A B Thread B-Thread on Barrel (not visible from side view) F KK L2 L1 L PT06E PT06A PT06 F B SHELL Q L THREAD SIZE MAX. CLASS 2A B F L1 THREAD MAX. CLASS 2A 6 0.625 0.906 .3125-32 0.175 1.553 .3750-32 (15.9) (23.0) NEF (4.4) (39.4) 8 0.750 0.906 .4375-28 0.297 1.553 .5000-28 (19.1) (23.0) UNEF (7.5) (39.4) 10 0.859 0.906 .5625-24 L3 PTSE06E F G L3 MAX. - - - - - 1.266 0.560 1.328 0.240 0.125 1.906 2.413 (32.2) (14.2) (33.7) (6.1) (3.2) (48.4) (61.3) 0.421 1.553 .6250-24 1.266 0.685 1.328 0.302 0.188 1.906 2.413 (21.8) (23.0) NEF (10.7) (39.4) (32.2) (17.3) (33.7) (7.7) (4.8) (48.4) (61.3) 12 1.013 0.906 .6875-24 0.546 1.553 .7500-20 1.266 0.813 1.328 0.428 0.312 1.906 2.413 (25.7) (23.0) NEF (13.9) (39.4) (32.2) (20.7) (33.7) (10.9) (7.9) (48.4) (61.3) 14 1.156 0.906 .8125-20 0.663 1.553 .8750-20 1.266 0.930 1.328 0.552 0.375 1.906 2.413 (29.4) (23.0) UNEF (16.8) (39.4) (32.2) (23.6) (33.7) (14.0) (9.5) (48.4) (61.3) 16 1.281 0.906 .9375-20 0.787 1.553 1.0000-20 1.266 1.057 1.328 0.615 0.500 2.047 2.528 (32.5) (23.0) UNEF (20.0) (39.4) (26.8) (33.7) (15.6) (12.7) (52.0) A Endbell (64.2) ESE endbell 18 1.319 0.906 1.0625-18 0.879 1.553 1.1875-18 1.266 1.175 1.328 0.740 0.625 2.078 2.528 (33.5) (23.0) NEF (22.3) (39.4) (32.2) (29.8) (33.7) (18.8) (15.9) (52.8) (64.2) 20 1.531 1.062 1.1875-18 1.014 1.703 1.1875-18 1.438 1.301 1.297 0.740 0.625 2.250 2.753 (38.9) (27.0) NEF (25.8) (43.3) (36.5) (33.0) (32.9) (18.8) (15.9) (57.2) (70.0) 22 1.656 1.062 1.3125-18 1.135 1.703 1.4375-18 1.438 1.430 1.297 0.928 0.750 2.250 2.753 (42.1) (27.0) NEF (28.8) (43.3) (36.5) (36.3) (32.9) (23.6) (19.1) (57.2) (70.0) 24* 1.776 1.125 1.4375-18 1.259 1.765 1.4375-18 1.500 1.555 1.359 0.990 0.800 2.312 2.830 (45.1) (28.6) NEF (32.0) (44.8) (38.1) (39.5) (34.5) (25.1) (20.3) (58.7) (71.9) UNEF NEF UNEF UNEF UNEF NEF NEF NEF NEF 1.266 0.440 (32.2) (11.2) PT06front PT06side (32.2) * Commercial All dimensions in inches (millimeters in parenthesis) 140 PTSE06/SR PT06E/SR L2 MAX. NEF L2 KK MAX. G For assistance in North America: +1 800.675.1214 • www.peigenesis.com • sales@peigenesis.com L3 MAX. - - - RIGHT ANGLE PLUGS STRAIGHT PLUGS PT08E PT08SE PT08CP PT06J MS3116J PT08P PT08SP PT08CP XX L2 PT06P PT06SP PT06CP MS3116P L3 MS3126P L4 PT06W XX F L1 PT06P PT06W PT06J PT06W/J F F Jendbell XL PTSE08E PT08E PT08P PTSE08P SHELL F L1 SIZE DIA. MAX. XL L2 XX XX MAX. MIN. MAX. Q F1 L3 MAX. L3 MAX. 6 0.192 1.526 - - - - - - - - - - - (4.9) (38.8) - - - - - - - - - - 8 0.317 1.526 1.705 2.271 0.168 0.230 0.796 0.169 1.786 - 0.312 1.656 - (8.1) (38.8) (43.3) (57.7) (4.3) (5.8) (20.2) (4.3) - (7.9) (42.1) - 10 0.434 1.526 1.705 2.271 0.205 0.312 0.921 0.170 1.880 2.137 0.438 1.781 2.031 (43.3) (57.7) (5.2) (7.9) (23.4) (4.3) (47.8) (54.3) (11.1) (45.2) (51.6) 12 0.548 1.526 1.848 2.411 0.338 0.442 1.046 0.264 1.965 2.222 0.516 1.743 2.093 (46.9) (61.2) (8.6) (11.2) (26.6) (6.7) (49.9) (56.4) (13.1) (44.3) (53.2) 14 0.673 1.526 2.040 2.599 0.416 0.539 1.171 0.310 2.113 2.370 0.625 1.953 2.203 (51.8) (66.0) (10.6) (13.7) (29.7) (7.9) (60.2) (15.9) (49.6) (56.0) (11.0) (38.8) (13.9) (38.8) (17.1) (38.8) (45.4) (53.7) F2 L4 MAX. L4 MAX. - PT08side 16 0.798 1.526 2.256 2.943 0.550 0.616 1.297 0.330 2.315 2.572 0.656 2.000 2.250 (57.3) (74.8) (14.0) (15.6) (32.9) (8.4) (58.8) (65.3) (16.7) (50.8) (57.2) 18 0.899 1.526 2.486 3.172 0.600 0.672 1.422 0.444 2.423 2.680 0.703 2.046 2.296 (63.1) (80.6) (15.2) (17.1) (36.1) (11.3) (61.5) (68.1) (17.9) (52.0) (58.3) 3.610 0.635 0.747 1.562 0.510 2.695 2.753 0.766 2.218 2.343 (72.2) (91.7) (16.1) (19.0) (39.7) (13.0) (68.5) (68.9) (19.5) (56.3) (59.5) 22 1.149 1.546 3.000 3.766 0.670 0.846 1.672 0.515 2.742 2.799 0.812 2.265 2.390 (76.2) (95.7) (17.0) (21.5) (42.5) (13.1) (69.6) (71.1) (20.6) (57.5) (60.7) 24 1.274 1.656 3.210 3.985 0.740 0.894 1.797 0.656 2.980 3.037 0.918 2.624 2.624 (81.5) (101.2) (18.8) (22.7) (45.6) (16.7) (75.7) (77.1) (23.3) (66.6) (66.6) (20.3) (38.8) (22.8) (38.8) 20 1.024 1.546 2.844 (26.0) (39.3) (29.2) (39.3) (32.4) (42.1) 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I DIMENSIONS All dimensions in inches (millimeters in parenthesis) For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 141 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I DIMENSIONS JAM NUT RECEPTACLES M S1 M M M P R1 PT07 PT07A N PT07E PT07SE N B L PT07E-SR PT07SE-SR N B P F N PT07P PT07SP B P P L2 L1 L3 PT07A PT07 PT07E-SR PT07SE-SR PT07P PANEL THICKNESS SHELL B THREAD M N P R S L L1 L2 L1 L2 F L3 SIZE UNEF-2A MIN. MAX. MAX. MAX. MAX. MAX. MAX. 6 .4375-28 0.696 0.348 0.125 0.625 0.812 0.062 0.125 8 PT07E(20.6) (1.6) (3.2) (17.7) (8.8) (3.2) (15.9) .5625-24 0.696 0.473 0.125 0.750 0.938 0.062 0.125 (17.7) (12.0) (3.2) (19.1) (23.8) (1.6) (3.2) PT07front 10 .6875-24 0.696 0.590 0.125 0.875 1.062 0.062 0.125 PT07side (17.7) (15.0) (3.2) (22.2) (27.0) (1.6) (3.2) 12 .8750-20 0.696 0.750 0.125 1.062 1.250 0.062 0.125 0.821 1.282 0.821 1.282 1.758 0.821 1.282 1.758 (20.9) PT07F (32.6) (20.9) (20.9) 0.821 (17.7) (19.1) (3.2) (27.0) (31.8) (1.6) (3.2) (20.9) (17.7) (22.2) (3.2) (30.2) (34.9) (1.6) (3.2) (20.9) (17.7) (25.4) (3.2) (33.3) (38.1) (1.6) (3.2) (20.9) (17.7) (28.6) (3.2) (36.5) (41.3) (1.6) (3.2) (20.9) (22.5) (31.8) (4.0) (39.7) (46.0) (1.6) (6.4) (26.4) (22.5) (34.9) (4.0) (42.9) (49.2) (1.6) (6.4) (26.4) (23.3) (38.1) (4.0) (46.1) (52.4) (1.6) (6.4) (27.2) 14 1.0000-20 0.696 0.875 0.125 1.188 1.375 0.062 0.125 16 1.1250-18 0.696 1.000 0.125 1.312 1.500 0.062 0.125 18 1.2500-18 0.696 1.125 0.125 1.438 1.625 0.062 0.125 20 1.3750-18 0.884 1.250 0.156 1.562 1.812 0.062 0.250 22 1.5000-18 0.884 1.375 0.156 1.688 1.938 0.062 0.250 24 1.6250-18 0.917 1.500 0.156 1.816 2.062 0.062 0.250 0.821 0.821 0.821 1.040 1.040 1.073 - (32.6) (44.7) (32.6) (44.7) 1.282 1.758 (32.6) (44.7) 1.282 1.758 (32.6) (44.7) 1.282 1.884 (32.6) (47.9) 1.282 1.884 (32.6) (47.9) 1.514 2.134 (38.5) (54.2) 1.514 2.134 (38.5) (54.2) 1.547 2.167 (39.3) (55.0) - - - 0.202 1.289 (5.1) PT07P PT07SP L3 MAX. - (32.7) - 1.438 1.922 0.327 1.289 (36.5) (48.8) (8.3) (32.7) 1.438 1.922 0.444 1.289 - 1.656 (36.5) (48.8) (11.3) (32.7) (42.1) (36.5) (48.8) (14.2) (32.7) (42.1) (36.5) (48.8) (17.3) (32.7) (42.1) (36.5) (50.8) (20.5) (32.7) (42.1) (36.5) (50.8) (23.1) (32.7) (42.1) (41.4) (55.2) (26.3) (40.7) (48.8) (41.4) (55.2) (29.4) (40.7) (48.8) (48.8) (56.7) (32.6) (41.5) (49.6) 1.438 1.922 0.558 1.289 1.438 1.922 0.683 1.289 1.438 2.000 0.808 1.289 1.438 2.000 0.909 1.289 1.625 2.172 1.034 1.602 1.625 2.172 1.159 1.602 1.688 2.234 1.284 1.635 1.656 1.656 1.656 1.656 1.922 1.922 1.951 PANEL CUTOUTS/THICKNESS P ±.005 (0.13) PANEL THICKNESS 4 HOLES PANEL THICKNESS PANEL B + .010 (0.25) - .000 (0.00) PANEL FRONT PANEL MTG REF B SHELL FRONT A +.000 (0.00) SIZE MOUNT B -.010 (0.25) REAR PANEL MTG REF P ±.005 (±.125) PANEL THICKNESS SCREW B B SIZE PT00/PT02 PTB 6 0.492 0.469 0.125 #4 0.087 0.218 A B PANEL THICKNESS SHELL +010-.000 +.000-.010 SIZE (+.25-.00) (+.00-.25) MIN. MAX. 6 0.447 0.420 0.062 0.125 0.542 0.062 0.125 0.669 0.062 0.125 0.830 0.062 0.125 0.955 0.062 0.125 1.084 0.062 0.125 1.208 0.062 0.125 1.333 0.062 0.250 1.459 0.062 0.250 1.575 0.062 0.250 A +.000 (0.25) (12.5) (11.9) (3.2) (2.2) (5.5) (11.4) (10.7) (15.7) (15.1) (3.2) (2.2) (5.5) (14.5) (13.8) (18.7) (18.3) (3.2) (2.2) (5.5) (17.7) (17.0) (21.8) (20.6) (3.2) (2.2) (5.5) (22.5) (21.1) (25) (23.0) (3.2) (2.2) (5.5) (25.6) (24.3) (28.3) (24.6) (3.2) (2.2) (5.5) (28.8) (27.5) (31.4) (27.0) (3.2) (2.2) (5.5) (32.0) (30.7) (34.6) (29.4) (3.2) (5.4) (8.7) (35.2) (33.9) (37.7) (31.8) (3.2) (5.4) (8.7) (38.3) (37.1) (40.9) (34.9) (3.9) (5.4) (7.9) (41.5) (40.0) -.000 (0.00) 142 PT07 PT00/PT02/PTB A (T.P.) 8 0.618 0.594 0.125 #4 0.087 0.218 8 10 0.735 0.719 0.125 #4 0.087 0.218 10 12 0.859 0.812 0.125 #4 0.087 0.218 12 14 0.985 0.906 0.125 #4 0.087 0.218 14 16 1.113 0.969 0.125 #4 0.087 0.218 16 18 1.235 1.062 0.125 #4 0.087 0.218 18 20 1.361 1.156 0.125 #4 0.212 0.344 20 22 1.485 1.250 0.125 #4 0.212 0.344 22 24 1.611 1.375 0.155 #6 0.212 0.311 24 0.572 0.697 0.884 1.007 1.134 1.259 1.384 1.507 1.634 For assistance in North America: +1 800.675.1214 • www.peigenesis.com • sales@peigenesis.com (1.6) (3.2) (1.6) (3.2) (1.6) (3.2) (1.6) (3.2) (1.6) (3.2) (1.6) (3.2) (1.6) (3.2) (1.6) (6.4) (1.6) (6.4) (1.6) (6.4) MS3057-C WATERPROOF CABLE CLAMP FLANGE MOUNT RECEPTACLE ACCESSORIES GASKET NUT PLATE SEALING SCREWS DUMMY RECEPTACLE DUST CAPS PLUG DUST CAP RECEPTACLE FLANGE DUST CAP RECEPTACLE JAM NUT DUST CAP FLANGE MOUNT RECEPTACLE ACCESSORIES CABLE CLAMP 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I ACCESSORIES DUST CAPS RECEPTACLES CABLE SHELL SEALING DUMMY CLAMP FOR SIZE GASKET NUT PLATE SCREWS RECEPTACLE PLUGS FLANGED JAM NUT   A ENDBELLS 8 10-101949-008 M85049/95-8A S440-1/2 MS3115-8 MS3180-8C* MS3181-8C* MS3181-8N* MS3057-3A 10 10-101949-010 M85049/95-10A S440-1/2 MS3115-10 MS3180-10C* MS3181-10C* MS3181-10N* MS3057-4A 12 10-101949-012 M85049/95-12A S440-1/2 MS3115-12 MS3180-12C* MS3181-12C* MS3181-12N* MS3057-6A 14 10-101949-014 M85049/95-14A S440-1/2 MS3115-14 MS3180-14C* MS3181-14C* MS3181-14N* MS3057-8A 16 10-101949-016 M85049/95-16A S440-1/2 MS3115-16 MS3180-16C* MS3181-16C* MS3181-16N* MS3057-10A 18 10-101949-018 M85049/95-18A S440-1/2 MS3115-18 MS3180-18C* MS3181-18C* MS3181-18N* MS3057-12A 20 10-101949-020 M85049/95-20A S440-1/2 MS3115-20 MS3180-20C* MS3181-20C* MS3181-20N* MS3057-12A 22 10-101949-022 M85049/95-22A S440-1/2 MS3115-22 MS3180-22C* MS3181-22C* MS3181-22N* MS3057-16A 24 10-101949-024 M85049/95-24B S632-1/2 MS3115-24 MS3180-24C* MS3181-24C* MS3181-24N* MS3057-16A CMD02-8 CMD02-10 CMD02-12 CMD02-14 CMD02-16 CMD02-18 CMD02-20 CMD02-22 CMD02-24 *A = Anodized plating (omit A for olive drab) All dimensions in inches (millimeters in parenthesis) For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 143 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I ASSEMBLY INSTRUCTIONS PT SOLDER CONTACTS STEP 1: Slide the rear accessories over the wire bundle in the proper sequence for re-assembly: cable clamp and/ or endbell first, then ferrule and, if used, coupling nut. STEP 2: Insert individual wires through the proper holes in the grommet. Use isopropyl alcohol as a lubricant. STEP 3: Solder wires to appropriate contacts on the rear of the connector. Information on standard soldering practices is available upon request. Please contact us. STEP 4: Fixture the connector for reassembly using the endbell assembly tools on a page 146 or a mating connector with contacts installed. STEP 5: Slide the grommet down the wires (lubricating the grommet with isopropyl alcohol will help). STEP 6: Fill all unused grommet cavities with a wire hole filler to maintain the sealing integrity of the connector. STEP 7: Slide coupling nut, ferrule, and endbell accessories over rear of the connector and tighten. For more information, a see page 146. PTSE & PTCE CRIMP TOOL OPERATION LOCATOR CONTACT SIZE STRIP LENGTH 20 .275 (7.0) 16 .250 (6.4)  12 .250 (6.4) STEP 1: Strip the wires to the appropriate length. LATCH CRIMP TOOL LOCATOR LATCH LOCATOR COLOR CODE INDEX MARK STEP 2: Open the AF8 (M22520/1-01) crimp tool by squeezing the handles. Push the latch on TH1A (M22520/1-02) to pop up the locator on the turret. Attach the turret to the AF8 crimp tool using the two captive hex bolts in the turret. TURRET STEP 3: Select the proper locator position for your contact by rotating the locator until the proper color is aligned with the index mark. Push locator back down until it snaps into position CONTACT SIZE LOCATOR COLOR 20 Red 16 Blue 12 Yellow DIAL LOCK PIN STEP 4: Adjust dial for proper wire gauge. To change the dial setting, remove the lock pin and lift center of dial. Turn to the desired wire gauge. Replace lock pin on dial. STEP 5: Cycle the tool before inserting the contact to be sure the tool is in the open position. Drop the contact, mating end first, into the crimp cavity of the tool. Squeeze the tool handle just enough to grip the contact without actually crimping it. STEP 6: Insert the stripped wire into the contact with a slight twisting motion. Be sure all wire strands are inside the contact. Squeeze the handle to cycle the tool. The handle will not release until the contact is completely crimped. CHECK TO BE SURE CONDUCTOR IS VISIBLE THROUGH WIRE INSPECTION HOLE CRIMP WIRE ENLARGEMENT OF MICROSECTIONS ALLOWS FOR FINAL JUDGEMENT OF CRIMP QUALITY INSULATION SHOULD PRESS AGAINST THE END OF THE CONTACT. 144 STEP 7: Remove the crimped contact. Pull on the wire slightly to be sure it is properly crimped. Be sure the contact is not bent or damaged in any way. Visually inspect the crimp. All dimensions in inches (millimeters in parenthesis) For assistance in North America: +1 800.675.1214 • www.peigenesis.com • sales@peigenesis.com INSERTION OF CONTACTS STEP 1: Slide the rear accessories over the wire bundle in the proper sequence for re-assembly: cable clamp and/or endbell first, then ferrule, and coupling nut. STEP 2: Use the proper insertion tool from the Contact Selection Chart on a page 132, slide the tool over the wire side of the contact until the tool bottoms on the contact.The tool for size 16 contacts presses against the shoulder of the contact. The rear, or insulation support, of the size 20 contacts presses against an internal shoulder in the tool tip. STEP 3: Dip the contact and tool tip in isopropyl alcohol (do not use any lubricant other than isopropyl alcohol). Hold the tool perpendicular to the rear of the connector. Beginning with the center cavity and working outwards in a circular pattern, insert the wired contact into the rear of the connector until the contact snaps into place. A light pull on the wire will ensure that the contact is locked securely. SIZE STEP 4: Fill any unused cavities with contacts. A wire hole filler must be inserted into the grommet behind the unused contacts to maintain the sealing integrity of the connector. STEP 5: Check the mating face of the connector to ensure that all the same size contacts are on the same plane (fully inserted). If not, the contact is not fully inserted. Remove the contact using the proper extraction tool and procedure and re-insert. Do not attempt to reinsert the insertion tool to correct the problem. TORQUE (INCH/LBS) 8, 10, 12, 14 16, 18 10 - 15 15- 25 20, 22, 24 25 - 35 STEP 6: Fixture the connector for re-assembly using the endbell assembly tools on a page 146 or a mating connector with contacts installed. Slide the connector accessories back down the cable over the rear of the connector and tighten. Torque as shown above. 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I ASSEMBLY INSTRUCTIONS EXTRACTION OF CONTACTS STEP 1: Remove the endbell accessories and slide them back over the wires. STEP 2: Use the proper extraction tool from the chart on a page 133. STEP 3: On the mating face of the connector, insert the tool over the contact and into the insulator until the tool bottoms. While keeping an even pressure against the tool, push the plunger on the tool shaft forward with your thumb and index finger. This will release the contact from the retention tine and push it toward the rear of the connector. STEP 4: Carefully remove the extraction tool from the connector. Pull the wire by hand to completely remove the contact from the rear of the connector. For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 145 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I CONNECTOR TOOLS TG69P NON-MARRING ADJUSTABLE ENDBELL PLIERS FOR FIELD SERVICE TG70 STRAP WRENCH The strap wrench is used to connect or disconnect coupling nuts in a confined space, or to tighten or loosen endbells without damaging the connector plating. A strap wrench also increases torque, allowing you to more easily mate or unmate a connector pair. Substitute tools, such as a pipe wrench or pliers, should never be used because of the high probability of severe damage to the connector plating or the coupling mechanism. The TG69P pliers have resilient jaws and are used to tighten or remove endbells without damaging the connector plating. The pliers are adjustable and will accommodate all of the connector sizes in this catalog. Substitute tools, such as a pipe wrench or metal jaw pliers, should never be used due to the high probability of severe damage to the connector plating. Replacement jaws, part number G77015, are available. The 600 series is a complete system for the proper assembly and torquing of connector endbells. The system includes a benchmounted or hand-held torque wrench, plug and receptacle holders, and a range of endbell-tightening tools. When used together, these tools provide consistent endbell installations. Each item is shipped with detailed assembly instructions. PLUG & RECEPTACLE HOLDERS SHELL SIZE ROTATIONS 600-007 600-004 Bench-mounted torque wrench Hand-held torque wrench PIN W=G SOCKET W=H MIL-DTL-26482 FOR PT, PT-SE, MS311_, MS312_ RECEPTACLES PLUGS 8 600D005-8R 600D005-8P 10 600D005-10R 600D005-10P 12 600D005-12R 600D005-12P X=I X=J 14 600D005-14R 600D005-14P Y=K Y=L 16 600D005-16R 600D005-16P Z=M Z=N 18 600D005-18R 600D005-18P 20 600D005-20R 600D005-20P 22 600D005-22R 600D005-22P 24 600D005-24R 600D005-24P TORQUE VALUES IMPORTANT NOTE: If barrel/shell has three threads or less, torque to 30 to 35 inch/Lbs (3.4 to 4.0 NM) per L-725-2. 146 Endbell SHELL SIZE Jam Nut INCH-LBS. N-M MIN MAX MIN MAX SHELL INCH-LBS. N-M SIZE MIN MAX MIN MAX 6 20 26 2.3 2.9 8 26 32 2.9 3.6 8 20 26 2.3 2.9 10 30 36 3.4 4.1 10 26 32 2.9 3.6 12 46 50 5.2 5.6 12 30 36 3.4 4.1 14 55 60 6.2 6.8 14 40 46 4.5 5.2 16 70 75 7.9 8.5 16 50 55 5.6 6.2 18 80 85 9.0 9.6 18 60 65 6.8 7.3 20 90 95 10.2 10.7 20 75 80 8.5 9.0 22 100 110 11.3 12.4 22 85 90 9.6 10.2 24 110 120 12.4 13.6 24 100 110 11.3 12.4 For assistance in North America: +1 800.675.1214 • www.peigenesis.com • sales@peigenesis.com