Contents
This booklet is intended to be used as a ready reference to typical standard, miniature and subminiature cylindrical connector
part numbers and terminology. Reading its brief pages will not
make you a connector expert, but should guide you in becoming familiar with the product, in order to better serve our customers.
SECTION I
Nomenclature: Cylindrical Connectors .................................. 1-3
Basic Components
SECTION II
Major MIL-Specifications by Type
Standard, MIL-DTL-5015
Amphenol 97 Series
Heavy Duty, MIL-DTL-22992
Proprietary Variations ............................................................ 4-5
MIL-DTL-5015 and 97 Series Part Number Breakdown
MIL-DTL-22992 Part Number Breakdown
AAO, Amphenol Aerospace division of Amphenol Corporation,
is the leading manufacture of military aerospace interconnect
products in the word. Brand names include Amphenol® and
Pyle-National® and Matrix®.
AIO, Amphenol Industrial division of Amphenol Corporation, is a
worldwide leader in the manufacture of industrial and powerbus
interconnect products. Brand names include Amphenol® and
Pyle-National®.
SECTION III
Major MIL-Specifications by Type
Miniature, MIL-DTL-26482................................................... 6-10
MIL-DTL-26482 Part Number Breakdown
Miniature Crimp, Solder Part Number Breakdown
Note: Many of the connector products in this brochure were formerly known as “Bendix” products. These products are now
manufactured and sold under the Amphenol ® brand name. The
name “Amphenol” will replace the name “Bendix” on products
and literature in the future.
SECTION IV
Major MIL-Specifications by Type
Subminiature, MIL-DTL-38999, MIL-DTL-27599 ............... 11-22
Subminiature – JT/LJT, Tri-Start, SJT Features
JT/LJT Part Number Breakdown and Specifications
LJT-R/JT-R and Accessories Cross Reference List
Tri-Start Series III Part Number Breakdown (metal,
composite and Clutch-Lok)
Tri-Start Specifications
SJT Part Number Breakdown
Amphenol operates a quality system that is third-party
certified to ISO9001:2000 and AS9100.
For more information and for Amphenol catalogs online
go to: www.amphenol-aerospace.com or
www. amphenol-industrial.com.
SECTION V
Cross Reference by MIL-Spec to Competitor’s
and Amphenol Part Numbers ............................................ 23-25
Intermating Chart
Amphenol Corporation
Amphenol Aerospace and
Amphenol Industrial Operations
40-60 Delaware Avenue
Sidney, New York 13838-1395
Phone: 800-678-0141 or 607-563-5011
Fax: 607-563-5157
SECTION VI
Qualified Products List by Connector
Specification ........................................................................... 26
Amphenol®/Pyle®/Matrix® Quick Product Guide................. 27-28
SECTION VII
Know the Language........................................................... 29-31
Basic Questions to Determine Connector Requirements ....... 32
What Do You Need to Sell............................. Inside Back Cover
Checklist
Conclusion
NOTE: MIL-DTL-5015 supersedes MIL-C-5015
MIL-DTL-22992 supersedes MIL-C-22992
MIL-DTL-26482 supersedes MIL-C-26482
MIL-DTL-38999 supersedes MIL-C-38999
These MIL-spec numbers will be updated in catalogs as they are printed
in the future.
0
SECTION I
Nomenclature: Cylindrical Connectors
Mated Pair
Basic Components
1. Shell (Houses Inserts & Contacts)
2. Insert (Dielectric Contact Insulator) Pin or Socket
3. Contact (Wire End Termination) (Electrical Engagement)
4. Coupling Nut
5. Accessories (Wire Seals, Cable Seals, Wire Support, etc.)
RECEPTACLE
PLUG
SHELL
Rear Accessory
COUPLING NUT
INSERT
ENVIRONMENTAL
SEALING GROMMET
CONTACTS
REAR ACCESSORIES
Shell Styles
WALL MOUNT RECEPTACLE
DESIGNATION: 00
LINE MOUNT RECEPTACLE OR
CABLE CONNECTING RECEPTACLE*
DESIGNATION: 01
SOLDER MOUNT RECEPTACLE
(HERMETIC)
DESIGNATION:IH
JAM NUT RECEPTACLE
DESIGNATION: 07
* This connector style is sometimes referred to as a cable connecting “plug.”
It does, however, mate with either a straight or 90 degree plug.
1
BOX MOUNT RECEPTACLE
DESIGNATION: 02
STRAIGHT PLUG
DESIGNATION: 06
Nomenclature: Cylindrical Connectors and
Contacts
Inserts
Insert
(Pin or Socket)
Insert &
Grommet Assy.
Shell Styles (Cont’d.)
Coupling
Threaded, Bayonet
Shell Sizes (Typical MIL-DTL-5015)
8S, 10S, 10SL, 12S, 12,
14S, 14, 16S, 16, 18
20, 22, 24, 28, 32, 36, 40, 44, 48
“S” designates short shell and short contacts
Shell size denotes mating thread diameter in 16ths of an inch.
For example, a size 8 shell denotes 8/16 of an inch with a
.5000-28 UNEF thread.
•
•
•
•
Style Designation (PT)
May include a soft front interfacial seal (Bonded) if dielectric is
hard, and a rear sealing grommet separate or attached.
PLUG
SHELL STYLES
06
Straight
08
Angle
09
Flange Mount Receptacle
05
Straight, Less Rear Accessory
Solder
Crimp
Metal Clip Retention
Dielectric Retention
Contact and Contact Termination Style
Pin – Crimp*
RECEPTACLE
SHELL STYLES
00
Wall Mount
01
Cable Connecting or
Line Mount Receptacle
02
Box Mount
03
Wall Mount, Less Rear Accessory
04
Line Mount, Less Rear Accessory
07
Jam Nut
IH
Solder Mount Hermetic
Socket – Crimp*
Pin – Solder
Socket – Solder
Sizes by Wire Gauge, Examples:
*Crimp is removable
4/0 American
Wire Gauge 4/0
22D American Wire Gauge 22-28
2
Contact Versatility - Several types of Contacts can be
designed into a Connector Shell
Nomenclature: Cylindrical Connectors and
Contacts, cont.
MIL-DTL-38999 connectors allow users to mix a variety of different power, signal, shielded, fiber optic and high speed contact
styles within a common insert.
The insert arrangement below is an arrangement for Tri-Start
MIL-DTL-38999 Series III connectors. It shows the variety of contacts that can be designed into a shell size 25. Typically, customers specify the contacts sizes and power they require and chose
an existing arrangement that fits their needs. For special new
configurations, engineering will design the arrangement of contacts to fit within material and performance criteria.
Contacts
Pin
Socket
Crimp or Solder
Usually installed in insert, frequently bonded in place.
Usually separate from insert,
shipped loose or in bulk, tools
needed to crimp, install and remove.
A
P
Contact Options:
Solderless Wrap (Wire Wrap),
PC Tail, Coaxial, Thermocouple,
Triaxial, Fiber Optic, Filter, Twinax, Quadrax
B
Y
N
R
d
X
M
n
m
W
s
c
k
L
K
C
Z
e
p
q
t
S
g
h
r
T
D
a
E
i
j
b
V
Contact Sizes
F
U
J
G
H
Contact Size
American Wire Gauge
Wire Size (AWG)
Contact Size
American Wire Gauge
Wire Size (AWG)
22D
22M
22
20
16
22-28
24-28
22-26
20-24
16-20
12
8
4
0
12-14
8-10
4-6
0-2
Insert Arrangement
Number of Contacts
Contact Size
22
22D
Contact Legend
3
20
8
25-41
11
2
16
12 Coax
10
12
16
3
8 Twinax
20
22D
Contacts and Fiber Optic Termini for
Cylindrical Connectors
Accessories
• Adapters
– straight, 90°, 75°
– conduit, environmental, open wire bundle, EMI, etc.
Amphenol’s broad contact product range for Cylindrical Connectors includes:
• Standard 500 cycle and 1500 cycle, M39029 type power and
signal contacts
• Crimp contacts for front or rear release connector applications
• Solder type, fixed contacts with cup or eyelet termination
• Thermocouple contacts
• Compression ring – wire seal
• Clamp – cable sealing
• Stain relief – clamp, kellems grip
• Potting boot
– straight, angle, universal
• RADSOK® sockets for high amperage power contacts
• Spring-loaded and push-pull types
• Filter contacts: Pi type tubular or Pi type planar for MF, HF,
VHF, and UHF frequencies
• High frequency shielded coax, triax and twinax contacts
• High speed differential twinax and quadrax contacts
• For cylindrical connector attachment to Printed Circuit Boards:
• PC tail contacts for signal and power applications, in coax,
twinax, triax, differential twinax and quadrax designs
• Compliant pin (Press fit) contacts
• Fiber optic Termini: MIL-T-29504 type or MT ferrules or ARINC
801 termini
3
SECTION II
MIL-DTL-5015 Part Number
Major MIL-Specifications by Type
• Standard, MIL-DTL-5015
• Amphenol 97 Series
• Heavy Duty, MIL-DTL-22992
• Proprietary Variations
Shell
Style
MS*
3102
Military
Standard
• Older larger series of connectors
• Found on many pieces of military equipment and commercial
applications
Insert
Arrangement
A
18
Class
Shell
Size
Alternate
Rotation
-3
S
W
Contact
Type
*or 97 Series Proprietary
MIL-DTL-5015
• Mostly heavy current carrying connectors
• Early types had only solder type contacts
• Later revision to MIL Spec also added crimp type contacts
• Amphenol supplies both the solder and crimp types to the
MIL Spec
• Amphenol supplies both solder and crimp versions under proprietary part numbers
Class A or C
Class B
• Several variations of basic MIL-DTL-5015 and MIL-DTL22992 types are available in the same and additional contact
arrangements, such as the QWL, QWLD, 10-214000 Series,
10-244000 Series and others.
• See Amphenol catalog sections:
– MIL-DTL-5015 Cylindrical 12-020,
– MIL-DTL-5015 Modifications 12-021,
– Heavy Duty Cylindrical 12-052,
– Commercial Aircraft Cylindrical 12-101,
– 97 Series (MIL-DTL-5015 Proprietary) 12-022,
– GT Series Bayonet 12-024.
Class E/F
• Basic part number for MIL-DTL-5015 Series as supplied by
Amphenol is MS310X A, C, E, F or R
• MIL-DTL-5015 threaded coupling - 1 key/keyway shell
polarization
Class R
Mating Halves
• Plugs: MS3106, MS3107, MS3108 or
97-3106, 97-3107, 97-3108
• Receptacles: MS3100, MS3102, MS3101, 97-3101,
97-3100, 97-3102
MIL-DTL-5015 Shell Styles
3100
Wall Mount Receptacle
3101
Cable Connecting Receptacle*
3102
Box Mount Receptacle
3106
Straight Plug
Other Non-MIL-Mates, Flange Mounted
• Flange Mounted Plug: FP3106, 97-5105
3108
90 ° Plug
• Thru-bulkhead Receptacle: TBF
3107
Quick Disconnect Plug
(97 Series only)
See also 10-74XXX and 10-873XX in catalog section MIL-DTL-5015 Mods. for
jam nut receptacles (Non-MIL)
Alternate Positions
of Insert Arrangements
Contact Sizes
Contact Size
16
12
8
4
0
American Wire Gauge
Wire Size (AWG)**
16-20
12-14
8-10
4-6
0-2
NORMAL POSITION
* This connector style is sometimes referred to as a cable connecting “plug.”
It does, however, mate with either a straight or 90 degree plug.
** Crimp adapter for small gauge wire is available, part number 10-074696-XXX.
POSITION W
4
POSITION X
POSITION Y
POSITION Z
Heavy Duty Cylindrical Connectors
• Class L - for the heaviest loads
– Current range 40 to 200 amperes
– Direct current or single/three phase, 60/400 Hertz
alternating current
– Automatic grounding for safety
7. Alternate Insert Rotations:
Used to prevent cross-mating of connectors. Absence of a
letter in this space indicates normal (0 °) position of the
insert. See catalog for alternate insert rotation illustrations.
• QWLD - for most power and control circuits
– Military qualified connectors and commercial
equivalents available
– Increased shell size for greater durability than similar standard connectors
• Class L and QWLD have 5 key/keyway shell polarization
and double stub thread coupling
• QWL – a more economical, compact heavy duty design for
commercial power and control applications; single key shell
polarization and double stub thread coupling
The ordering procedure for QWLD MS-Approved Connectors is
illustrated by part number MS17343R20N27PW as shown
below:
Part Number
MS17343
R
20
N
27
P
W
2
3
4
5
6
The ordering procedure for Class “L” Connectors is illustrated
by part number MS90555C32412SY as shown below:
Part Number
MS90555
C
32
4
12
S
Y
1
2
3
4
5
6
7
See code below:
MIL-DTL-22992 Series Connectors
Classes C, R and L
Part Number Breakdown
1
See catalog 12-052 for proprietary equivalents such as 10194XXX Series. Also see catalog 12-053 for QWL Series.
1. MS Numbers
MS90555 designates wall mount receptacle (power
source)
MS90556 designates straight plug
MS90557 designates cable connecting receptacle without
coupling ring
MS90558 designates wall mount plug with coupling ring
(equipment end)
2. Shell Finish
C (conductive) for AC or N (non-conductive) for DC circuits
7
3. Shell Size
Relates directly to current carrying capability
Size 28 – 40 amperes
See code below:
1. MS Numbers
MS17343 designates wall mount receptacle
MS17344 designates straight plug
MS17345 designates cable connecting receptacle
MS17346 designates box mount receptacle
MS17347 designates jam nut receptacle with rear
accessory threads (wall mount)
MS17348 designates jam nut receptacle (box mount)
Size 32 – 60 amperes
Size 44 – 100 amperes
Size 52 – 200 amperes
4. Main shell Key/keyway Position
N designates normal position. Three other positions (4, 5
and 6) of the main shell key/keyway prevent cross-mating or
incompatible voltages. Refer to the individual connector style
descriptions in catalog 12-052 for applicability.
2. Class
C designates pressurized; used where circuit integrity is
protected by a pressure differential
R designates environmental; (see Heavy Duty Cylindrical
catalog 12-052 for definition)
5. Insert Arrangement
Determined by connector size (current carrying capability)
and cable configuration to be accommodated. See catalog
for insert arrangement pattern illustrations.
3. Shell Size
Available in shell sizes 12 through 44. See catalog 12-052
for dimensional data
4. Shell Finish
C for conductive or N for non-conductive
5. Insert Arrangement
Current MS insert arrangements are listed in catalog 12-052,
Heavy Duty Cylindrical
6. Contact Type
“P” designates pin contacts; “S” for socket contacts
5
6. Contact Type
“P” designates pin contacts. “S” for socket contacts.
MS90555 and MS90557 are supplied with socket contacts
only. MS90556 and MS90558 are supplied with pin contacts
only.
7. Alternate Insert Rotation
Used to prevent cross-mating of incompatible frequencies.
Absence of a letter in this space indicates normal (0 °) position of the insert. See catalog for individual insert arrangement description.
SECTION III
Major MIL-Specifications by Type
• Miniature, MIL-DTL-26482
MIL-DTL-26482 Part Number
Miniature PT-Types MIL-DTL-26482
MS/PT-SE Crimp Series 1
• Widely used smaller connectors
Shell
Style
• Extensive use on military equipment including aircraft as well
as commercial applications
Contact
Type
• Available with either crimp or solder type contacts
MS
312
Military
Std.
Crimp
Type
• 3 point bayonet coupling
0
E
22
–
55
P
W
• Popular low cost series
• 5 Key/keyway shell polarization
• Amphenol supplies MIL-Spec types as well as proprietary
versions
Class
Shell
Insert
Size Arrangement
Alternate
Rotation
• MS311X or PT, solder type contacts (Series 1)
• MS312X or PT-SE, crimp type contacts (front release)
(Series 1)
MIL-DTL-26482 Part Number
• MS347X or MB1, crimp type contacts (rear release)
(Series 2)
MS/PT Solder Series 1
• Modifications of Basic Series are:
Shell
Style
– PT-CE, crimp type contacts (front release) no MIL P/N,
intermates with MS connectors
– PC, double stub threaded coupling, bright cadmium plated,
- (available with either crimp or solder contacts) no MIL P/
N, does not intermate with PT types
– SP, same as PT except wider flanges for back panel
mounting, anodic coating, no MIL P/N, intermates with MS
connectors
– DC, same as PT except resistant to aircraft fluids, no MIL
P/N, intermates with MS connectors
– Other modifications and specials available
MS
311
Military
Std.
Solder
Type
• For details on above series see Amphenol catalog sections:
– “Miniature Cylindrical” 12-070
– “Commercial Aircraft Cylindricals” 12-101.
0
Contact
Type
E
Class
22
–
55
P
Shell
Insert
Size Arrangement
X
Alternate
Rotation
MIL-DTL-26482 Part Number
MB1 Series 2, Rear Release Crimp
MIL-DTL-26482 Series 2 is the same as MIL-DTL-83723 Series
1 and will intermate with all PT connectors. The Series features
rear removable contacts – accessories are ordered separately.
MIL-DTL-83723 Series 1 has been superseded by MIL-DTL26482 Series 2.
Shell
Style
MS
347
0
Military
26482
Std.
Series 2
Rear Release
Crimp
6
Contact
Type
L
Class
22
–
55
Shell
Insert
Size Arrangement
S
Y
Alternate
Rotation
How to Order BY MILITARY PART NUMBER
MIL-DTL-26482 Series 2 Connectors
MS
1
3470
2
W
3
12 – 10
4
5
P
6
W
7
1.
Connector Type
MS designates Military Standard
2.
Connector Style
3470 wall mounting receptacle with narrow flange
3472 wall mounting receptacle with wide flange
3471 cable connecting receptacle
3474 jam nut receptacle
3476 straight plug
3475 straight plug with RFI grounding fingers
3.
How to Order BY PROPRIETARY PART NUMBER
MIL-DTL-26482 Series 2 Connectors
MB1
1
Service Class
L
aluminum shell, electroless nickel finish, fluid
resistant insert
A
aluminum shell, black anodized finish, non-conductive fluid resistant insert
W
aluminum shell, olive drab cadmium plated, fluid
resistant insert
Note:
0
2
W – 12
3
4
10
5
P
6
W
7
***
8
1.
Connector Type
MB1 designates Amphenol®/Matrix® Bayonet Coupling
Connector
2.
Connector Style
0
wall mounting receptacle with narrow flange
1
wall mounting receptacle with wide flange
3
cable connecting receptacle
4
jam nut receptacle
6
straight plug
8
straight plug with RFI grounding fingers
3.
Service Class
A
aluminum shell, black anodize finish, non-conductive, fluid resistant insert
R
aluminum shell, electroless nickel finish, fluid
resistant insert
G
stainless steel shell, passivated, fluid resistant
insert
W
aluminum shell, cadmium plated, olive drab finish,
fluid resistant insert
For stainless steel shell, passivated, order by Amphenol®/Matrix®
proprietary Class G.
Class L inactivates older classes E and R (Ref. MIL-C-26482)
4., 5. Shell size and insert arrangement - See chart on page 9
and pattern drawings that follow.
4., 5. Shell size and insert arrangement - See chart on page 9
and pattern drawings that follow.
6.
6.
Contact Types
P designates pin
S designates socket
7.
Insert Rotation
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell
from normal position. No letter required for normal (no
rotation) position.
8.
Modification Number
Consult Amphenol, Sidney, NY for information.
For strain reliefs use the following modification codes:
(189) E-nut M85049/31 configuration
(190) Straight strain relief M85049/52 configuration
(191) 90° strain relief M85049/51 configuration
Contact Types
P designates pin
S designates socket
A designates less pins
B designates less sockets
Note:
7.
Use A & B only when other than a full complement of power contacts is to be installed.
Insert Rotation
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell
from normal position. No letter required for normal (no
rotation) position.
For ordering information on accessories, such as protection
caps and backshell hardware, contact Amphenol, Sidney, NY.
7
Miniature Crimp Connectors
Part Number Breakdown
Proprietary Part Number Construction for Miniature Crimp
Connectors
Part Number Nomenclatures for MS/PT Crimp Connectors
to MIL-DTL-26482 Specification
To more easily illustrate ordering procedures, part number
PT00SE-20-41PW (SR) is shown as follows:
To more easily illustrate ordering procedures, part number
MS3120E-20-41PW is broken down as follows:
Part Number
PT
00
1
2
SE – 20 - 41
3
4
5
Part Number
P
W
(SR)
MS
312
0
E
20 - 41
P
W
6
7
8
1
2
3
4
5
7
8
See code below:
1. Connector Family
PT designates standard olive drab cadmium plated Tri-Lock
coupling connector
SP designates connector similar to PT except for anodic
coating and larger flange and mounting holes for back
panel mounting of receptacles
2. Shell Style
“00” designates wall mount receptacle
“01” designates cable connecting receptacle
“02” designates box mount receptacle
“06” designates straight plug
“07” designates jam nut receptacle
“08” designates 90 ° plug
3. Service Class
“SE” designates crimp, environmental (MIL-DTL-26482)
“SP” designates crimp, potted type (MIL-DTL-26482)
Both of the above are Amphenol proprietary versions of the
MIL-DTL-26482 Series 1 crimp contact connector and offer
15 lbs. contact retention for size 20 contacts, 25 lbs. for size
16 contacts.
“CE” designates crimp, environmental
“CP” designates crimp, potted type
Both of the above are original Amphenol crimp connectors
and offer 7 lbs. contact retention for size 20 contacts, 9 lbs.
for size 16 contacts.
4. “20” designates shell size. Shell sizes available are
8 through 24.
6
See code below:
1. “MS” designates Military Standard
2. “312” designates basic family number for MIL-Spec 26482
crimp type
3. Shell Style
“0” designates wall mount receptacle
“1” designates cable connecting receptacle
“2” designates box mount receptacle
“4” designates jam nut receptacle
“6” designates straight plug
“7” designates box mount receptacle with dual
mounting holes
“8” designates wall mount receptacle with dual
mounting holes
4. Service Class
“E” designates environmental resisting connector
“F” designates environmental resisting connector with strain
relief
“P” designates potted type with potting boot
5. “20” designates shell size. Shell sizes available are
8 through 24.
6. “20-41” designates insert arrangement
7. “P” designates pin contacts; “S” for socket contacts
8. “W” designates that the insert is rotated in its shell from the
standard position to alternate position W. The basic rotations
are W, X, Y, and Z. No letter required for normal (no rotation)
position.
5. “20-41” designates insert arrangement
Cross Reference - Commercial PT to Comparable
Military MS Types
6. “P” designates pin contacts; “S” for socket contacts
7. “W” designates that insert is rotated in its shell from the standard position to alternate position W. The basic rotations are
W, X, Y, and Z. No letter required for normal (no rotation)
position.
8. “SR” designates a strain relief clamp. Deviation suffixes
would be inserted here. For example, (005) would indicate
the metal parts (except contacts) would have anodic coating.
8
Amphenol P/N
MS P/N
Amphenol P/N
MS P/N
PT00SE
PT01SE
PT02SE
PT06SE
MF02SE
MF00SE
PT07SE
PT08SE
PT00SE(SR)
PT01SE(SR)
MS3120E
MS3121E
MS3122E
MS3126E
MS3127E
MS3128E
MS3124E
None
MS3120F
MS3121F
PT06SE(SR)
MF00SE(SR)
PT07SE(SR)
PT08SE(SR)
PT00SP
PT01SP
PT02SP
PT06SP
PT07SP
MS3126F
MS3128F
MS3124F
None
MS3120P
MS3121P
MS3122P
MS3126P
MS3124P
Miniature Solder Connectors
Part Number Breakdown
Part Number Nomenclature for Miniature Solder
Connectors
Part Number Nomenclatures for MS/PT Solder Connectors
to MIL-DTL-26482 Specification
To more easily illustrate ordering procedures, part number
PT00A-20-41PW (SR) is shown as follows:
To more easily illustrate ordering procedures, part number
MS3110E20-41PW is shown as follows:
Part Number
PT
00
A-
1
2
3
Part Number
20 - 41
P
W
(SR)
MS
311
0
E
4
6
7
8
1
2
3
4
5
See code below:
20 - 41
5
P
W
7
8
6
See code below:
1. Connector Family
PT designates standard olive drab cadmium plated Tri-Lock
coupling connector. This is the Amphenol® proprietary
version of the MIL-DTL-26482 solder contact connector.
PC designates a bright cadmium plated connector with double stub thread coupling
SP designates connector similar to PT except for anodic
coating and larger flange and mounting holes for back
panel mounting
1. “MS” designates Military Standard
2. “311” designates basic family number for MIL-Spec 26482
solder type
3. Shell Style
“0” designates wall mount receptacle
“1” designates cable connecting receptacle
“2” designates box mount receptacle
“4” designates jam nut receptacle
“6” designates straight plug
4. Service Class
“E” designates environmental resisting connector with grommet and clamping nut
“F” designates environmental resisting connector with grommet and strain relief
“J” designates clamp assembly for moisture proofing multijacketed cables, with strain relief
“P” designates potted type with potting boot
2. Shell Style
“00” designates wall mount receptacle
“01” designates cable connecting receptacle
“02” designates box mount receptacle
“06” designates straight plug
“07” designates jam nut receptacle
PTB designates thru-bulkhead receptacle
PTI designates solder mount receptacle
3. Service Class
“A” designates general duty backshell
“C” designates pressurized receptacle
“E” designates environmental resisting with grommet and
clamping nut
“J” designates clamp assembly for moisture proofing multijacketed cables, with strain relief
“P” designates potted with potting boot
“W” designates clamp assembly for moisture-proofing, multijacketed cables
“H” designates hermetic seal receptacle
4. “20” designates shell size. Shell sizes available are
6 through 24.
5. “20-41” designates insert arrangement
6. “P” designates pin contacts; “S” for socket contacts
7. “W” designates that insert is rotated in its shell from the standard position to alternate position W. The basic rotations are
W, X, Y, and Z. No letter required for normal (no rotation)
position.
8. “SR” designates a strain relief clamp. Deviation suffixes
would be inserted here. For example, (005) would indicate
the metal parts (except contacts) would have alumilite plating.
9
5. “20” designates shell size. Shell sizes available are
8 through 24.
6. “20-41” designates insert arrangement
7. “P” designates pin contacts; “S” for socket contacts
8. “W” designates that the insert is rotated in its shell from the
standard position to alternate position W. The basic rotations
are W, X, Y, and Z. No letter required for normal (no rotation)
position.
Cross Reference - Commercial PT to Comparable
Military MS Types
Amphenol P/N
MS P/N
Amphenol P/N
MS P/N
PT00A
PT01A
PT02A
PT06A
PT07A
PT00C
PT02C
PT07C
PTB
PT00E
PT01E
PT02E
PT06E
PT07E
None
None
None
None
None
None
None
None
MS3119Ref
MS3110E
MS3111E
MS3112E
MS3116E
MS3114E
PT00E(SR)
PT01E(SR)
PT06E(SR)
PT07E(SR)
PT00P
PT01P
PT02P
PT06P
PT07P
PT00W
PT01W
PT06W
PT02H
PT07H
PT1H
MS3110F
MS3111F
MS3116F
MS3114F
MS3110P
MS3111P
None
MS3116P
MS3114P
None
None
None
None
MS3114H
MS3113H
Miniature Shell Styles
Also see PTB - Thru- bulkhead, double-ended receptacle in
Miniature Cylindrical catalog.
Wall Mount
Receptacle
Cable Connecting
or Line Mount
Receptacle*
Wide Flange - Back Panel Mount:
MS3127 Box Mount, MS3128 Wall Mount
MIL-DTL-26482
Box Mount
Receptacle
Class E
Class F
Class P
Class H
Solder Mount
Receptacle
(Hermetic)
Class J
Jam Nut
Receptacle
Class W
(Non-MIL)
Shell Sizes
6, 8, 10, 12, 14, 16, 18, 20, 22, 24
Contact Sizes
Straight Plug
* This connector style is sometimes referred to as a cable connecting “plug.”
It does, however, mate with either a straight or 90 degree plug.
10
Contact Size
20
16
12
American Wire Gauge
Wire Size (AWG)
20-24
16-20
12-14
SECTION IV
Major MIL-Specifications by Type
• Subminiature, MIL-DTL-38999*
• MIL-DTL-27599
Subminiature - JT/LJT, Tri-Start, SJT
MIL-DTL-38999
• Preferred for new design by the Military
Series I (LJT-R)
• Greatest growth potential of all cylindricals
• 100% scoop-proof
• “State of the Art” technology and performance
• High density arrangements (up to 128 contacts)
• MIL-DTL-27599 has molded-in solder type contacts
• Contact sizes 12 through 22D plus size 16, 12, 8 coax, and
size 8 twinax
• MIL-DTL-38999 has rear release, crimp removable contacts
• SJT has features of both the JT and LJT and is a NATO preferred connector in Europe
• Bayonet coupling
• DOD preferred
• MIL-DTL-38999 Series I & II will not intermate
• Corrosion resistant (500 hr. salt spray) finish available
• MIL-DTL-27599 Series I & II will not intermate
• Removable crimp, PCB, wire wrap, twinax, and coax contacts
available
• MIL-DTL-38999 and MIL-DTL-27599, Series I and II will intermate respectively
• Options include Hermetics, Filters and Thermocouples
• 5 key/keyway polarization with 4 alternate keyings
• For more information, see Amphenol catalog section:
– 12-C1*, Subminiature Cylindrical Connectors designed to
MIL-DTL-38999 and MIL-DTL-27599
• Shell grounding fingers are standard on all plug
– 12-C1*, Tri-Start Connector - MIL-DTL-38999 Series III
• Available in a Fail Safe Lanyard Release plug: see Amphenol
catalog 12-C1.
• Triple-web grommet seal
– 12-091, SJT - Proprietary MIL-DTL-38999 type
– 12-130, High Frequency Contact Catalog
Series II (JT-R)
• High density arrangements (up to 128 contacts)
MIL-DTL-27599
• Low silhouette, light-weight non-scoop-proof
Series I (LJT-Solder)
• Bayonet coupling
• 100% scoop-proof
• Contact sizes 12 through 22D plus size 16 & 12 coax
• Molded-in solder type contacts
• 5 key/keyway polarization with 4 alternate keyings
• Options include PCB, wire wrap contacts
• High contact density (up to 128 contacts)
• Removable crimp, PCB, wire wrap and coax contacts
available
• Shell grounding fingers standard on all plugs
• Corrosion resistant (500 hr. salt spray) finish available
• Intermateable with MIL-DTL-38999 Series I
• Options include Hermetics, Filters and Thermocouples
• Bayonet coupling
• Shell grounding fingers on plugs are an option
• 5 key/keyway polarization with 4 alternate keyings
• Triple-web grommet seal
• Available in Fail Safe Lanyard Release plug
Series II (JT-Solder)
• Low profile, light-weight, non-scoop-proof
• Molded-in solder type contacts
• Options include PCB, wire wrap contacts
• High contact density (up to 128 contacts)
* Catalog 12-C1 is Amphenol’s new catalog - combining 38999 Series I, II and III
Connectors. These were formerly catalogs 12-090 (Series I, II) and catalog 12092 (Series III). Consult Amphenol Aerospace for the availability of this new
catalog.
• Shell grounding fingers available as option on plug
• Intermateable with MIL-DTL-38999 Series II
• Bayonet coupling
• 5 key/keyway polarization with 4 alternate keyings
11
Subminiature JT/LJT
Part Number Breakdown
PROPRIETARY PART NUMBER
To more easily illustrate ordering procedure, part number
JT00RE-22-2PA( ) is shown as follows:
Part Number
JT
00
RE-
22-
2
P
A
( )
1
2
3
4
5
6
7
8/9
See code below:
1. Connector Type:
JT designates standard Junior Tri-Lock connector
LJT designates long Junior Tri-Lock connector
LJTS JTS designates high temperature connector
LJTN JTN designates chemical and fuel resistant
JTL designates miniature mounting dimensions
JTLN designates miniature mounting dimensions –
chemical resistant
JTLS designates miniature mounting dimensions –
high temperature
LJTPQ JTPQ designates back panel mounted wall mounting receptacle
LJTP JTP designates back panel mounted box mounting
receptacle
LJTPN JTPN designates back panel mounted –
chemical resistant
LJTPS JTPS designates back panel mounted –
high temperature
JTG* designates plug with grounding fingers
JTNG* designates plug with grounding fingers –
chemical resistant
3. Service Class: Crimp contacts/connectors
“RP” for potting crimp applications – Supplied with spacer
grommet and potting boot.†
“RE” for environmental crimp applications – Supplied with a
grommet and compression nut † (JT Series only). Can
be supplied with strain relief integral with compression
nut “RE (SR).”
“RT” for environmental applications – Supplied without rear
accessories. Design provides serrations on rear
threads of shells. For additional information defining
complete description of service class, consult Amphenol, Sidney, NY.
4. Shell Size
JT shell sizes available from 8 through 24. LJT shell sizes
available from 9 through 25.
5. Insert Arrangement:
22-2 designates insert arrangement. Refer to catalog 12-C1
for additional insert patterns.
6. Contact Style
“P” designates pin contacts; “S” designates socket contacts.
7. Alternating Keying
“A” designates alternate keying connector assembly. Other
basic alternate keys are “B”, “C” and “D”. No letter
required for normal (no rotation) position.
8. “SR” designates a strain relief clamp. Strain reliefs are available only on “A”, “C” and “RE” class connectors.
9. Finish variation suffix.
† Not applicable to box mounting style.
Cadmium plated nickel base
Olive drab cadmium plate nickel base
Electroless nickel
Anodic coating (Alumilite)
Chromate treated (Iridite 14-2)
*Grounding fingers standard on all LJT plugs.
2. Shell Style
“00” designates wall mount receptacle
“01” designates line mount receptacle
“02” designates box mount receptacle
“06” designates straight plug
“07” designates jam nut receptacle
“08” designates 90-degree plug
“I” designates solder mount receptacle – hermetic
3. Service Class: Solder contacts/connectors
“P” for potting applications – These connectors are supplied with a potting boot.† All shells are designed
with integral features to retain potting boots
“A” for general duty applications (JT series only)
“A (SR)” – threaded rear design with strain relief †
“C” for pressurized applications
“C” (SR)” – threaded rear design with strain relief †
“H” for hermetic applications – Fused compression
glass sealed inserts. Leakage rate less than .01
micron cu. ft/hr. (1 x 10-7 cc/sec.) at 15 psi differential.
“Y” same as “H” with interfacial seal
“T” for MS27599A applications – General duty – pressurized (receptacles only) (LJT series only)
Military
Finish
Data
Finish
A
B
F
C
Finish
Suffix
Finish
plus “SR”
Suffix
(SR)
(386)
(424)
(300)
(344)
(014)
(023)
(005)
(011)
MILITARY TYPES
MS27473
E
MS Number
Service Class
Shell Size
Finish
Insert Arrangement
Contact Style (P or S)
Alternate Keying –No letter
required for normal position
14
A
18
P
A
Military Service Class
E Environmental, same as RE
T Environmental, same as RT
Y Hermetically sealed, same as Y
P Potting, same as RP
For finish variations see finish data on following page.
For MS depictions and dimensional data see applicable MILSpec. (MIL-DTL-38999, MIL-DTL-27599).
12
Amphenol Gage Code 77820
Subminiature JT/LJT
Specifications
CONTACT RATING
Test Current
Contact
Size
Solder &
Crimp
Hermetic
Maximum
Millivolt Drop
Crimp*
Maximum Millivolt Drop
Crimp Well Data
Contact
Size
Solder Well Data
Well
Diameter
Nominal
Well Depth
22M
.028 ± .001
.141
.029
85
22D
.0345 ±.0010
.141
.034
Solder*
Hermetic*
20
60
W
Diameter
22M
3
2
45
22D
5
3
73
22
5
3
73
20
85
22
.0365 ±.0010
.141
.036
20
7.5
5
55
20
60
20
.047 ±. 001
.209
.044
16
13
10
49
20
85
16
.067 ± .001
.209
.078
12
23
17
42
20
85
12
.100 ± .002
.209
.116
10 Power
33
NA
33
NA
NA
10 Power
.137 ± .002
.355
Nominal
Well Depth
+.004
–.000
+.004
–.000
+.004
–.000
+.004
–.004
+.000
–.004
+.004
–.002
.094
.094
.094
.125
.141
.141
NA
NA
* When tested using silver plated wire
SERVICE RATING**
Suggested Operating Voltage
(Sea Level)
Service
Rating
Test Voltage
(Sea Level)
Test Voltage
50,000 Ft.
Test Voltage
70,000 Ft.
Test Voltage
110,000 Ft.
AC (RMS)
DC
M
400
500
1300 VRMS
550 VRMS
350 VRMS
200 VRMS
N
300
450
1000 VRMS
400 VRMS
260 VRMS
200 VRMS
I
600
850
1800 VRMS
600 VRMS
400 VRMS
200 VRMS
II
900
1250
2300 VRMS
800 VRMS
500 VRMS
200 VRMS
** Please note that the establishment of electrical safety factors is left entirely in the designer’s hands, since he is in the best position to know what peak voltages, switching
surges, transients, etc. can be expected in a particular circuit.
FINISH DATA
Aluminum Shell Components Non-Hermetic
Suffix
Proprietary
Indicated Finish Standard for
JT Types Listed Below
Finish
Military
Standard for LJT Types
Listed Below
Cadmium Plated Nickel Base
MS (A)
–
JT/JTG/JTL/JTP
LJT/LJTP
Anodic Coating (Alumilite)
MS (C)
(005)
JTS/JTPS/JTLS
LJTPS/LJTS
(011)
JTN/JTPN/JTLN
LJTN/LJTPN
Chromate Treated (Iridite 14-2)
Olive Drab Cadmium Plate Nickel Base
MS (B)
(014)
Electroless Nickel
MS (F)
(023)
Hermetic Connectors
Suffix
Material Finish
Military
Proprietary
Carbon Steel Shell
Tin Plated Shell and Contacts
Carbon Steel Shell
Tin Plated Shell and Gold Plated Contacts
MS (D)
(452) special termination
(468) solder cup
Stainless Steel Shell
Gold Plated Contacts
MS (E)
(162)
13
Indicated Finish Standard for
JT Types Listed Below
Indicated Finish Standard for
LJT Types Listed Below
JT ( ) H/JT ( ) Y
JTL ( ) H/JTL ( ) Y
LJT ( ) Y/LJT ( ) H
JTS ( ) Y
JTLS ( ) Y
LJTS ( ) Y
MIL-DTL-38999 LJT-R/JT-R and Accessories
Cross Reference List
Series or
Accessory
MS
Part No.
Amphenol
Part No.
Description
Series or
Accessory
MS
Part No.
Amphenol
Part No.
II
MS27472EXXAXXP/S
JT00R-EXX-XXP/S
II
MS27472EXXBXXP/S
JT00RE-XX-XXP/S (014)
Ac
MS27502AXXA
10-275197-XX7
Ac
MS27502BXXA
10-275197-XX9
Ac
MS27502FXXA
10-275197-XXG
II
MS27472EXXCXXP/S
JTS00R-EXX-XXP/S
Ac
MS27501AXXA
10-275196-XX7
II
MS27472EXXFXXP/S
JT00RE-XX-XXP/S (023)
Ac
MS27501BXXA
10-275196-XX9
II
MS27472TXXAXXP/S
JT00RT-XX-XXP/S
Ac
MS27501FXXA
10-275196-XXG
II
MS27472TXXBXXP/S
JT00RT-XX-XXP/S (014)
Ac
MS27342AXX-1
10-440390-XX7 (Series II)
II
MS27472TXXCXXP/S
JTS00RT-XX-XXP/S
Cap, Recept. Series I
No Chain
Cap, Plug Series I,
No Chain
Ac
MS27342BXX-1
10-440390-XX9 (Series II)
II
MS27472TXXFXXP/S
JT00RT-XX-XXP/S (023)
Ac
MS27342CXX-1
10-440390-XX5 (Series II)
II
MS27472PXXAXXP/S
JT00RP-XX-XXP/S
Ac
MS27342FXX-1
10-440390-XXG (Series II)
II
MS27472PXXBXXP/S
JT00RP-XX-XXP/S (014)
Ac
MS27342AXX-2
10-241055 Series II
II
MS27472PXXCXXP/S
JTS00RP-XX-XXP/S
Ac
MS27342BXX-2
10-457452 Series I
II
MS27472PXXFXXP/S
JT00RP-XX-XXP/S (023)
Ac
MS27342CXX-2
II
MS27473EXXAXXP/S
JT06RE-XX-XXP/S
Ac
MS27342FXX-2
II
MS27473EXXBXXP/S
JT06RE-XXP/S (014)
Ac
MS27510AXXA
10-241853-XX7
II
MS27473EXXCXXP/S
JT06RE-XX-XXP/S
Ac
MS27510BXXA
10-241853-XX9
II
MS27473EXXFXXP/S
JT06RE-XX-XXP/S (023)
Ac
MS27510CXXA
10-241853-XX5
II
MS27473TXXAXXP/S
JT06RT-XX-XXP/S
Ac
MS27510FXXA
10-241853-XXG
II
MS27473TXXBXXP/S
JT06RT-XX-XXP/S (014)
Ac
MS27511AXXA
10-241856-XX7
II
MS27473TXXCXXP/S
JT06RT-XX-XXP/S
II
MS27473TXXFXXP/S
JT06RT-XX-XXP/S (023)
II
MS27473PXXAXXP/S
JT06RP-XX-XXP/S
Adapter
Cap, Plug Series II,
No Chain
Ac
MS27511BXXA
10-241856-XX9
Ac
MS27511CXXA
10-241856-XX5
Ac
MS27511FXXA
10-241856-XXG
II
MS27473PXXBXXP/S
JT06RP-XX-XXP/S (014)
I
MS27466EXXAXXP/S
LJT00RE-XX-XXP/S
II
MS27473PXXCXXP/S
JTS06RP-XX-XXP/S
I
MS27466EXXBXXP/S
LJT00RE-XX-XXP/S (014)
II
MS27473PXXFXXP/S
JT06RP-XX-XXP/S (023)
I
MS27466EXXFXXP/S
LJT00RE-XX-XXP/S (023)
II
MS27474EXXAXXP/S
JT07RE-XX-XXP/S
I
MS27466TXXAXXP/S
LJT00RT-XX-XXP/S
II
MS27474EXXBXXP/S
JT07RE-XX-XXP/S (014)
I
MS27466TXXBXXP/S
LJT00RT-XX-XXP/S (014)
II
MS27474EXXCXXP/S
JTS07RE-XX-XXP/S
I
MS27466TXXFXXP/S
LJT00RT-XX-XXP/S (023)
II
MS27474EXXFXXP/S
JT07RE-XX-XXP/S (023)
I
MS27466PXXAXXP/S
LJT00RP-XX-XXP/S
II
MS27474TXXAXXP/S
JT07RT-XX-XXP/S
I
MS27466PXXBXXP/S
LJT00RP-XX-XXP/S (014)
II
MS27474TXXBXXP/S
JT07RT-XX-XXP/S (014)
I
MS27466PXXFXXP/S
LJT00RP-XX-XXP/S (023)
II
MS27474TXXCXXP/S
JTS07RT-XX-XXP/S
I
MS27467EXXAXXP/S
LJT06RE-XX-XXP/S
II
MS27474TXXFXXP/S
JT07RT-XX-XXP/S (023)
I
MS27467EXXBXXP/S
LJT06RE-XX-XXP/S (014)
II
MS27474PXXAXXP/S
JT07RP-XX-XXP/S
I
MS27467EXXFXXP/S
LJT06RE-XX-XXP/S (023)
II
MS27474PXXBXXP/S
JT07RP-XX-XXP/S (014)
I
MS27467TXXAXXP/S
LJT06RT-XX-XXP/S
II
MS27474PXXCXXP/S
JTS07RP-XX-XXP/S
I
MS27467TXXBXXP/S
LJT06RT-XX-XXP/S (014)
II
MS27474PXXFXXP/S
JT07RP-XX-XXP/S (023)
I
MS27467TXXFXXP/S
LJT06RT-XX-XXP/S (023)
II
MS27475YXXDXXP
JT00Y-XX-XXP
I
MS27467PXXAXXP/S
LJT06RP-XX-XXP/S
II
MS27475YXXEXXP
JTS00Y-XX-XXP
Cap, Recept. Series II,
No Chain
Wall Mount
Receptacle
Straight Plug
Wall Mount
Receptacle
Straight Plug
Jam Nut Mount
Receptacle
Wall Mount Recept.,
Hermetic Seal
I
MS27467PXXBXXP/S
LJT06RP-XX-XXP/S (014)
II
MS27476YXXDXXP
JT02Y-XX-XXP
I
MS27467PXXFXXP/S
LJT06RP-XX-XXP/S (023)
II
MS27476YXXEXXP
JTS0Y-XX-XXP
I
MS27468EXXAXXP/S
LJT07RE-XX-XXP/S
II
MS27477YXXDXXP
JT07Y-XX-XXP
I
MS27468EXXBXXP/S
LJT07RE-XX-XXP/S (014)
II
MS27477YXXEXXP
JTS07Y-XX-XXP
I
MS27468EXXFXXP/S
LJT07RE-XX-XXP/S (023)
II
MS27478YXXDXXP
JTIY-XX-XXP
I
MS27468TXXAXXP/S
LJT07RT-XX-XXP/S
II
MS27478YXXEXXP
JTSIY-XX-XXP
I
MS27468TXXBXXP/S
LJT07RT-XX-XXP/S (014)
II
MS27479EXXCXXP/S
JTS00RE-XX-XXP/S
I
MS27468TXXFXXP/S
LJT07RT-XX-XXP/S (023)
II
MS27479TXXCXXP/S
JTS00RT-XX-XXP/S
I
MS27468PXXAXXP/S
LJT07RP-XX-XXP/S
II
MS27480EXXCXXP/S
JTS06RE-XX-XXP/S
I
MS27468PXXBXXP/S
LJT07RP-XX-XXP/S (014)
II
MS27480TXXCXXP/S
JTS06RT-XX-XXP/S
I
MS27468PXXFXXP/S
LJT07RP-XX-XXP/S (023)
II
MS27481EXXCXXP/S
JTS07RE-XX-XXP/S
I
MS27469YXXDXXP
LJT00Y-XX-XXP
II
MS27481TXXCXXP/S
JTS07RT-XX-XXP/S
II
MS27482YXXEXXP
JTS00Y-XX-XXP
Wall Mount Recept.,
Hermetic Seal, Inactive,
Use MS27475
II
MS27483YXXEXXP
JTS07Y-XX-XXP
Jam Nut Mount Recept.,
Hermetic Seal, Inactive,
Use MS27477
I
MS27469YXXEXXP
LJTS00Y-XX-XXP
I
MS27470YXXDXXP
LJT07Y-XX-XXP
I
MS27470YXXEXXP
LJTS07Y-XX-XXP
I
MS27471YXXDXXP
LJTIY-XX-XXP
I
MS27471YXXEXXP
LJTSIY-XX-XXP
Straight Plug
Description
Jam Nut Mount
Receptacle
Wall Mount Recept.,
Hermetic Seal
Jam Nut Mount Recept.,
Hermetic Seal
Solder Mount Recept.,
Hermetic Seal
14
Box Mount Recept.,
Hermetic Seal
Jam Nut Mount Recept.,
Hermetic Seal
Solder Mount Recept.,
Hermetic Seal
Wall Mount Recept.,
Inactive, Use MS27472
Straight Plug, Inactive,
Use MS27473
Jam Nut Mount Recept.,
Inactive, Use MS27474
MIL-DTL-38999 LJT-R/JT-R and Accessories
Cross Reference List (Cont.)
Series or
Accessory
MS
Part No.
Amphenol
Part No.
Description
Series or
Accessory
MS
Part No.
Amphenol
Part No.
II
MS27484EXXAXXP/S
JTG06RE-XX-XXP/S
I
MS27498EXXAXXP/S
LJT08RE-XX-XXP/S
II
MS27484EXXBXXP/S
JTG06RE-XX-XXP/S (014)
I
MS27498EXXBXXP/S
LJT08RE-XX-XXP/S (014)
II
MS27484EXXFXXP/S
JTG06RE-XX-XXP/S (023)
II
MS27499EXXAXXP/S
JT02RE-XX-XXP/S
II
MS27484TXXAXXP/S
JTG06RT-XX-XXP/S
II
MS27499EXXBXXP/S
JT02RE-XX-XXP/S (014)
II
MS27484TXXBXXP/S
JTG06RT-XX-XXP/S (014)
II
MS27499EXXCXXP/S
JTS02RE-XX-XXP/S
II
MS27484TXXFXXP/S
JTG06RT-XX-XXP/S (023)
II
MS27499EXXFXXP/S
JT02RE-XX-XXP/S (023)
II
MS27484PXXAXXP/S
JTG06RP-XX-XXP/S
II
MS27500EXXAXXP/S
JT08RE-XX-XXP/S
II
MS27484PXXBXXP/S
JTG06RP-XX-XXP/S (014)
II
MS27500EXXBXXP/S
JT08RE-XX-XXP/S (014)
II
Straight Plug with
Grounding Spring
Description
90 Degree Plug, Inactive
for Design
Box Mount Receptacle
90 Degree Plug, Inactive
for Design
MS27484PXXFXXP/S
JTG06RP-XX-XXP/S (023)
I
MS27501AXXC
10-421399-XX7
Ac
MS27485AXX
10-528399-XX7
I
MS27501BXXC
10-421399-XX9
Ac
MS27485BXX
10-528399-XX9
I
MS27501FXXC
10-421399-XXG
Ac
MS27485CXX
10-528399-XX5
I
MS27502AXXC
10-427406-XX7
Ac
MS27485FXX
10-528399-XXG
I
MS27502BXXC
10-427406-XX9
Ac
MS27486-XX-1
10-241912-XX
Potting, Boot Straight,
Series II
I
MS27502FXXC
10-427406-XXG
Ac
MS27486-XX-2
10-241990-XX
Potting, Boot 90 Degree
Series II
II
MS27503YXXEXXP
JTSIY-XX-XXP
Solder Mount Receptacle,
Hermetic Seal Inactive,
use MS27503
Ac
MS27487-XX-1
10-450910-XX, Includes
MS27489
Kit, EMR Adapter,
Straight, Series I & II
II
MS27504EXXCXXP/S
JTS00RE-XX-XXP/S
Box Mount Receptacle,
Inactive, use MS27499
Ac
MS27487-XX-2
10-450911-XX
Kit, EMR Adapter, 90
Degree Series I & II,
I
MS27505EXXAXXP/S
LJTP02RE-XX-XXP/S (023)
I
MS27505EXXBXXP/S
LJTP02RE-XX-XXP/S (014)
I
MS27505EXXFXXP/S
LJTP02RE-XX-XXP/S (023)
I
MS27506AXX-1
10-436792-XX7
I
MS27506BXX-1
10-436792-XX9
I
MS27506FXX-1
10-436792-XXG
MS27506AXX-2
10-433992-XX7
Ac
MS27488-12-1
10-405996-121
Ring, Potting Boot,
Series II
Ac
MS27488-16-1
10-405996-161
Ac
MS27488-20-1
10-405996-201
Ac
MS27488-22-1
10-405996-241
Ac
MS27489-XXX
10-352425-XX
Adapter, Reducer EMR
for use with MS27487
II
Plug, Sealing Grommet
I
MS27490-XX
10-407035-XX5
Contact-Socket
II
MS27506BXX-2
10-433992-XX9
II
MS27491-XX
10-251416-XX5
Contact-Socket
II
MS27506CXX-2
10-433992-XX5
II
MS27492-XX
10-251416-XXH
Contact-Socket, Inactive, use MS27491
II
MS27506FXX-2
10-433992-XXG
I & II
MS27507A-XX
10-415693-XX7
I & II
MS27507B-XX
10-415693-XX9
I & II
MS27507C-XX
10-415693-XX5
II
MS27493-XX
10-251415-XX5
Contact-Pin
II
MS27494-XX
10-251415-XXH
Contact-Pin, Inactive,
use MS27493
MS27495R-XX
11-8675-XX
Tool, Contact, Removable, Metal
I & II
I & II
MS27495A-XX
11-8674-XX
I
MS27496EXXAXXP/S
LJT02RE-XX-XXP/S
I
MS27496EXXBXXP/S
LJT02RE-XX-XXP/S (014)
Tool, Contact,
Assembly, Metal
Box Mount Receptacle
I & II
MS27507F-XX
10-415693-XXG
II
MS27508EXXAXXP/S
JTP02RE-XX-XXP/S
II
MS27508EXXBXXP/S
JTP02RE-XX-XXP/S (014)
II
MS27508EXXCXXP/S
JTPS02RE-XX-XXP/S
II
MS27508EXXFXXP/S
JTP02RE-XX-XXP/S (023)
MS27509R-XX
10-296943-XX
I
MS27496EXXFXXP/S
LJT02RE-XX-XXP/S (023)
I & II
II
MS27497EXXAXXP/S
JTPQ00RE-XX-XXP/S
I & II
MS27509A-XX
10-296940-XX
II
MS27497EXXBXXP/S
JTPQ00RE-XX-XXP/S (014)
II
MS27510AXXC
10-241801-XX7
II
MS27497EXXCXXP/S
JTPSQ00RE-XX-XXP/S
II
MS27510BXXC
10-241801-XX9
II
MS27497EXXFXXP/S
JTPQ00RE-XX-XXP/S (023)
II
MS27510CXXC
10-241801-XX5
II
MS27497TXXAXXP/S
JTPQ00RT-XX-XXP/S
II
MS27510FXXC
10-241801-XXG
II
MS27497TXXBXXP/S
JTPQ00RT-XX-XXP/S (014)
II
MS27511AXXC
10-241800-XX7
II
MS27497TXXCXXP/S
JTPSQ00RT-XX-XXP/S
II
MS27511BXXC
10-241800-XX9
II
MS27511CXXC
10-241800-XX5
Cover, Plug, with chain
Cover Receptacle,
with chain
Back Panel Wall Mount
Receptacle
Adapter, Strain Relief,
Clamp Bars
Adapter, 90 Degree,
Strain Relief,
Clamp Bars
Back Panel Box Mount
Receptacle
Tool, Contact Removal
and Assembly, Plastic
Inactive, use M81969/14
Cap, Plug with chain
Cap, Receptacle, with
chain
II
MS27497TXXFXXP/S
JTPQ00RT-XX-XXP/S (023)
II
MS27497PXXAXXP/S
JTPQ002P-XX-XXP/S
II
MS27511FXXC
10-241800-XXG
II
MS27497PXXBXXP/S
JTPQ002P-XX-XXP/S (014)
II
MS27511AXXR
10-241866-XX7
II
MS27497PXXCXXP/S
JTPSQ002P-XX-XXP/S
II
MS27511BXXR
10-241866-XX9
II
MS27497PXXFXXP/S
JTPQ00RP-XX-XXP/S (023)
II
MS27511CXXR
10-241866-XX5
II
MS27497VXXAXXP/S
JTP00RE-XX-XXP/S
II
MS27511FXXR
10-241866-XXG
II
MS27497VXXBXXP/S
JTP00RE-XX-XXP/S (014)
II
MS27510 ( )XXR
10-241864-
Cap, Plug with wire rope
II
MS27497VXXCXXP/S
JTPS00RE-XX-XXP/S
II
MS27511( )XXN
10-241802-
Cap, Receptacle, Jam
Nut, with chain
II
MS27497VXXFXXP/S
JTP00RE-XX-XXP/S (023)
Back Panel Wall Mount
Receptacle.
15
Cap, Receptacle with
wire rope
MIL-DTL-38999 LJT-R/JT-R and Accessories
Cross Reference List (Cont.)
Series or
Accessory
MS
Part No.
Amphenol
Part No.
Description
Series or
Accessory
MS
Part No.
Amphenol
Part No.
II
MS27512-XXA
10-101917-XX7
I
MS27656TXXAXXP/S
LJTPQ00RT-XX-XXP/S
II
MS27512-XXB
10-101917-XX9
I
MS27656PXXBXXP/S
LJTPQ00RT-XX-XXP/S (014)
II
MS27512-XXC
10-101917-XX5
I
MS27656PXXFXXP/S
LJTPQ00RT-XX-XXP/S (023)
II
MS27512-XXE
10-260548-XX
I
MS27656PXXAXXP/S
LJTPQ00RP-XX-XXP/S
II
MS27512-XXF
10-101917-XXG
I
MS27656PXXBXXP/S
LJTPQ00RP-XX-XXP/S (014)
II
MS27513EXXAXXP/S
JT02RE-XX-XXP/S
I
MS27656PXXFXXP/S
LJTPQ00RP-XX-XXP/S (023)
II
MS27513EXXAXXP/S
JT02RE-XX-XXP/S (014)
I
MS27661EXXAXXP/S
87-538800/74
II
MS27513EXXCXXP/S
JTS02RE-XX-XXP/S
I
MS27661EXXBXXP/S
88-538800/74
II
MS27513EXXFXXP/S
JT02RE-XX-XXP/S (023)
I
MS27661EXXFXXP/S
91-538800/74
10-123017-XX7
I
MS27662EXXAXXC
LJTB-XX-XXX
10-123017-XX9
I
MS27662EXXBXXC
LJTB-XX-XXX
I
MS27662EXXCXXC
LJTB-XX-XXX
I
I
I
MS3186AXXW
I
10-195959-XX
I
MS3186AXXN
10-123017-XXG
I
MS27515EXXAXXP/S
LJTP00RE-XX-XXP/S
I
MS27515EXXBXXP/S
LJTP00RE-XX-XXP/S (014)
MS81969/14-04
10-538988-12
I & II
I & II
MS81969/14-03
10-538988-16
I & II
MS81969/14-10
10-538988-20
I & II
MS81969/14-01
10-538988-22D
Nut, Hex
Box Mount Receptacle,
Full Length Grommet
Nut, Hex
Black Panel Wall Mount
Receptacle, Inactive,
Use MS27656
Tool, Contact Insertion/ Removal, Plastic
I
MS39029/59
21-33101-XX
Contact, Socket,
Shielded
I
MS39029/60
21-33102-XX
Contact, Pin, Shielded
I
MS27652EXXFXXP/S
LJTS00RE-XX-XXP/S (023)
I
MS27652TXXFXXP/S
LJTS00RT-XX-XXP/S (023)
Wall Mount Receptacle
Inactive, Use MS27466
I
MS27653EXXFXXP/S
LJTS06RE-XX-XXP/S (023)
I
MS27653TXXFXXP/S
LJTS06RT-XX-XXP/S (023)
I
MS27654EXXFXXP/S
LJTPS00RE-XX-XXP/S (023)
I
MS27654TXXFXXP/S
LJTPS00RT-XX-XXP/S (023)
Back Panel Wall Mount
Recept. Inactive,
Use MS27656
I
MS27655-XX
10-407035-XXH
Contact, Socket, Inactive, Use MS27490
I
MS27656EXXAXXP/S
LJTPQ00RE-XX-XXP/S
I
MS27656EXXFXXP/S
LJTPQ00RE-XX-XXP/S (014)
I
MS27656EXXFXXP/S
LJTPQ00RE-XX-XXP/S (023
MS27662EXXFXXC
LJTB-XX-XXX
I & II
MS27663AXX-1
10-482790-XX7
I & II
MS27663BXX-1
10-482790-XX9
I & II
MS27663CXX-1
10-482790-XX5
I & II
MS27663FXX-1
10-482790-XX6
I & II
MS27663AXX-2
10-482494-XX7
I & II
MS27663BXX-2
10-482494-XX9
I & II
MS27663CXX-2
10-482494-XX5
I & II
Straight Plug, Inactive,
Use MS27467
MS27663FXX-2
10-482494-XX6
II
MS27664EXXAXXP/S
JTPQ00RE-XX-XXP/S
II
MS27664EXXBXXP/S
JTPQ00RE-XX-XXP/S (014)
II
MS27664EXXCXXP/S
JTPSQ00RE-XX-XXP/S
II
MS27664EXXFXXP/S
JTPQ00RE-XX-XXP/S (023)
II
MS27664TXXAXXP/S
JTPQ00RT-XX-XXP/S
II
MS27664TXXBXXP/S
JTPQ00RT-XX-XXP/S (014)
II
MS27664TXXCXXP/S
JTPSQ00RT-XX-XXP/S
II
MS27664TXXFXXP/S
JTPQ00RT-XX-XXP/S (023)
I
MS27665
Back Panel Wall Mount
Receptacle
16
Description
Back Panel Wall Mount
Receptacle
Back Panel Wall Mount
Receptacle
Straight Plug, Lanyard
Release
Thru-Bulkhead Mount
Receptacle
Adapter Nut,
Non-Metallic
(Nylon Only)
Adapter 90 Degree,
Non-Metallic
(Nylon Only)
Back Panel Wall Mount
Receptacle,
Inactive Use MS27497
Rack and Panel,
Cancelled
MS27666
DNS
II
MS27667EXXBXXC
JTB-XX-XX
II
MS27667EXXCXXC
JTB-XX-XX
II
MS27667EXXFXXC
JTB-XX-XX
MS27668
DNS
MS27669
DNS
MS27670
DNS
Thru-Bulkhead
UTZ Receptacle
Subminiature Tri-Start
How to Order – Amphenol® TV, metal and Amphenol® TV26 CLUTCH-LOK®
Proprietary Part Number
Amphenol® Tri-Start Connectors (metal) can be ordered by coded part number.
Ordering procedure is illustrated by part number TVPS00RF-9-35PB( ) as shown below:
TVPS
00
RF
-
9
-35
P
B
(XXX)
Connector Type
Shell Style
Service Class
Shell Size
Insert Arrangement
Contact Type
Alternate Positions
Special Variations
Connector Type
RQK
TV
TVP
TVS
TVPS
RQW
Y
RS*
designates Tri-Start Series Connector
designates back panel mounted receptacle
designates 200°C rated
designates back panel mounted, 200°C rated receptacle
same as RK except with Quadrax contacts and not
firewall capable
same as RW except with Quadrax contacts
hermetic seal, passivated stainless steel, 200°C
(non-hermetic connectors), nickel plated stainless
steel, optimum EMI shielding effectiveness –65dB
@ 10 GHz specification min., 500 hour salt spray,
200°C, firewall barrier
(hermetic connectors), nickel plated stainless steel,
200°C
Durmalon plated, Nickel-PTFE alternative to cadmium.
Corrosion resistant, 1,000 hour salt spray, EMI-50dB at
10GHz specification min., 175 degrees
Shell Style
00
01
02
06
26
07
09
IY
HIY
designates wall mount receptacle
designates line receptacle
designates box mount receptacle
designates straight plug
designates proprietary CLUTCH-LOK high vibration straight
plug (available in service classes RK and RS only)
designates jam nut receptacle
designates flange mounted plug
designates solder mounted receptacle, hermetic only
designates weld mounted receptacle, hermetic only
Service Class
alternate finish, requires special variation suffix. Example:
non-conductive, anodic coated aluminum is defined by
variation suffix 005. Consult Amphenol, Sidney NY for
details, options and availability of non-cadmium or nickel
finishes.
RF
electroless nickel plated aluminum, optimum EMI
shielding effectiveness –65dB @ 10GHz specification
min., 48 hour salt spray, 200°C
RGF** electroless nickel plated ground plane aluminum, 200°C
RGW** olive drab cadmium plated ground plane aluminum, 175°C
RK*
corrosion resistant stainless steel, firewall capability, plus
500 hour salt spray resistance, EMI –45 dB @ GHz
specification min., 200°C
RW
corrosion resistant olive drab cadmium plate aluminum,
500 hour extended salt spray, EMI –50 dB @ 10 GHz
specification min., 175°C
RQF
same as RF except with Quadrax contacts
RGQF same as RGF except with Quadrax contacts
RGQW same as RGW except with Quadrax contacts
YN
DN
Shell Size
MIL-DTL-38999, Sizes 9-25.
A
B
C
D
E
F
G
H
J
MIL Shell Size
9
11
13
15
17
19
21
23 25 Amphenol® Shell Size
RX
17
Insert Arrangement
MIL-DTL-38999, see insert arrangement charts in catalog 12-C1
Contact Type
P designates pin contacts
S designates socket contacts
Alternate Positions
Locksmith keying - rotation of minor keys. See catalog 12-C1
“N” not required for normal position.
Special Variations
Consult Amphenol Aerospace, Sidney, NY for variations.
* Coaxial arrangements are not available in these classes.
** For more information on Coax/Triax/Twinax Ground Plane
Connectors consult Amphenol Aerospace.
NOTE:Catalog 12-C1 is Amphenol’s new catalog - combining 38999
Series I, II and II. These were formerly catalogs 12-090 (Series
I, II) and catalog 12-092 (Series III). This combined catalog will
be available 4th Qtr. 2008.
Subminiature Tri-Start
How to Order – D38999, TV Military, metal and MTV26 CLUTCH-LOK®
Military Part Number
To more easily illustrate ordering procedure by military designation,
part number D38999/20F A35PB is shown as follows:
D38999 / 20
F
A
35
P
B
Connector Type
Shell Style
Service Class
Shell Size
Insert Arrangement
Contact Type
Alternate Positions
Connector Type
D38999/ designates MIL-DTL-38999 Series III Connector
MTV designates military D38999/26 CLUTCH-LOK high vibration
straight plug (available in service class RK only)
Shell Style
20 designates wall mount receptacle
21 designates box mount receptacle, hermetic
23 designates jam nut receptacle, hermetic
24 designates jam nut receptacle
25 designates solder mount receptacle, hermetic
26 designates straight plug
27 designates weld mount receptacle, hermetic
29 designates Lanyard Release plug with pin contacts*
30 designates Lanyard Release plug with socket contacts*
31 designates Lanyard Release plug with MIL-STD-1760 pin
contacts*
* For ordering Amphenol® Lanyard Release Connectors, consult catalog 12-C1.
Ordering procedure for Lanyard Release Connectors includes specifying lanyard
length codes and designating Stye 1 or 2.
Protection Caps (see catalog 12-C1)
32 designates plug protection cap
33 designates receptacle protection cap
Service Class
C non-conductive, anodic coated aluminum, 500 hour salt
spray, 200 °C (environmental resisting)
F electroless nickel plated aluminum, optimum EMI shielding
effectiveness – 65dB @ 10GHz specification min., 48 hour
salt spray, 200 °C (conductive, environmental resisting)
G space grade, electroless nickel, 48 hour salt spray, 200°C
K corrosion resistant stainless steel, firewall capability, plus
500 hour salt spray resistance, EMI – 45 dB @ 10 GHz
specification min., 200 °C
L corrosion resistant steel, electro-deposited nickel, 48 hour
salt spray, 200°C
W
Y
S
N
corrosion resistant olive drab cadmium plate aluminum,
500 hour extended salt spray, EMI – 50 dB @ 10GHz
specification min., 175°C
hermetic seal, passivated stainless steel, 200 °C
(non-hermetic connectors), nickel plated stainless steel,
optimum EMI shielding effectiveness – 65 dB @10 GHz
specification min., 48 hour salt spray, 200 °C
(hermetic connectors), nickel plated stainless steel, 200 °C
Shell Size
MIL-DTL-38999, Size 9 – 25
A
B
C
D
E
F
G
H
J
MIL Shell Size
9
11
13
15
17
19
21
23
25
Amphenol ® Shell Size
Insert Arrangement
MIL-DTL-38999, see catalog 12-C1
Contact Type
P designates pin contacts
S designates socket contacts
A designates same as “P” except supplied less pin contacts
B designates same as “S” except supplied less socket contacts (A & B designates non-standard contact applications)
X designates eyelet contacts, hermetics only
Alternate Positions
Locksmith keying - rotation of minor keys. See catalog 12-C1.
Use “N” for normal position
Special Variations
Consult Amphenol Aerospace, Sidney, NY for variations.
Amphenol® Cage Code 77820
18
Subminiature Tri-Start
How to Order –Amphenol® CTV, composite
Proprietary Part Number
Amphenol® Tri-Start Composite Connectors can be ordered by coded part number.
Ordering procedure is illustrated by part number CTVPS00RF-9-35PB as shown below:
CTVPS
00
RF – 9 – 35
P
B
Connector Type
Shell Style
Service Class
Shell Size
Insert Arrangement
Contact Type
Alternate Positions
Connector Type
CTV
designates Tri-Start Series Connector
CTVP designates panel mounted receptacle
CTVS designates 200°C rated
CTVPS designates panel mounted, 200°C rated receptacle
Shell Size
9 thru 25 available
Shell Style
00 designates wall mount receptacle
01 designates line receptacle
02 designates box mount receptacle*
06 designates straight plug
07 designates jam nut receptacle
Contact Type
H designates 1500 cycle pin contacts
J
designates 1500 cyclesocket contacts
P designates 500 cycle pin contacts
S designates 500 cycle socket contacts
Insert Arrangement
MIL-DTL-38999, see catalog 12-C1
Alternate Positions
Locksmith keying - rotation of minor keys. See catalog 12C1. “N” not required for normal position.
Service Class
RF
electroless nickel plated composite, 200°C, 2000 hour
salt spray
RW
olive drab cadmium plated composite, 175°C
RGF** electroless nickel plated ground plane composite,
200°C
RGW** olive drab cadmium plated ground plane composite,
175°C
RQF
same as RF composite except with Quadrax contacts
RQW same as RW composite except with Quadrax contacts
RGQF same as RGF composite except with Quadrax contacts
RGQW same as RGW composite except with Quadrax contacts
DN
Durmalon plated, Nickel-PTFE alternative to Cadmium.
Corrosion resistant, 1,000 hour salt spray, EMI-50dB at
10GHz specification min., 175 degrees
* Consult Amphenol Aerospace, Sidney, NY for availability.
** For more information on Coax/Triax/Twinax Ground Plane
Connectors consult Amphenol Aerospace.
Amphenol® Cage Code 77820
NOTE:Catalog 12-C1 is Amphenol’s new catalog - combining 38999 Series I,
II and II. These were formerly catalogs 12-090 (Series I, II) and catalog 12-092
(Series III). This combined catalog will be available 4th Qtr. 2008.
19
Subminiature Tri-Start
How to Order –D38999, CTV military, composite
Military Part Number
To more easily illustrate ordering procedure of Tri-Start Composite Connectors by military
designation, part number D38999/20JG35PN is shown as follows:
D38999/
20
J
G
35
P
N
Connector Type
Shell Style
Service Class
Shell Size
Insert Arrangement
Contact Type
Alternate Positions
Connector Type
D38999/ designates MIL-DTL-38999 Series III Connector
Insert Arrangement
MIL-DTL-38999, see catalog 12-C1
Shell Style
20 designates wall mount receptacle
24 designates jam nut receptacle
26 designates straight plug
(Consult Amphenol Aerospace for availability of composite box
mount receptacles)
Contact Type
H designates 1500 cycle pin contacts
J
designates 1500 cycle socket contacts
P designates 500 cycle pin contacts
S designates 500 cycle socket contacts
A designates same as “P” except supplied less pin
contacts
B designates same as “S” except supplied less socket
contacts
(A & B designate non-standard contact applications)
Service Class
J
olive drab cadmium plate (175°C),
2000 hrs. dynamic salt spray
M electroless nickel plate (200°C),
2000 hrs. dynamic salt spray
Alternate Positions
Locksmith keying - rotation of minor keys. See catalog 12C1 (Use N for normal).
Shell Size
MIL-DTL-38999, Sizes 9-25
A
B
C
D
E
F
G
H
J
MIL Shell Size
9
11
13
15
17
19
21
23
25
Amphenol ® Shell Size
20
Subminiature Tri-Start
Specifications
CONTACT RATING
MIL-DTL-38999, Series III (TV)
Test Current
Contact
Size
Maximum Millivolt Drop*
Crimp**
Hermetic**
• 100% scoop-proof
22D
5
3
73
85
• High density contact arrangements
20
7.5
5
55
60
85
• Contact sizes 12 through 22D plus size 8, 12, 16 coax, and
size 8 twinax
• Removable crimp, PCB, wire wrap, coax, triax, twinax and
high speed quadrax and differential twinax contacts
• Fiber optics available with MIL-PRF-29504 termini, MT ferrule
termini and ARINC 801 termini
Crimp
Hermetic
16
13
10
49
12
23
17
42
85
10 (Power)
33
NA
33
NA
* Maximum Millivolt Drop data is determined by measuring resistance of mated contacts from end to end
** When using silver plated wire
• Options include Hermetics, Filters and Thermocouples
Hermetic Well Data
Crimp Well Data
• Self-locking, quick disconnect threaded coupling
• Corrosion resistant - shells of stainless steel or cadmium
plate over nickel withstand a 500 hour salt spray exposure
Contact
Size
• Moisture resistance - improved interfacial seal design prevents electrolytic erosion of contacts
22D
Well
Diameter
Nominal
Well Depth
Min.
Well Depth
Well Diameter
.0345 ± .0010
.141
.036
20
.047 ± .001
.209
.044
• EMI shielding - designed to obtain metal-to-metal coupling,
the TV connector provides a superior EMI shielding capability
16
.067 ± .001
.209
.078
• Vibration/Shock - operates under severe, high temperature
shock and vibration testing through 200° C
12
.100 ± .002
.209
.116
• Clutch-LokTM MIL-DTL-38999 Series III High Vibration Connector - All advantages of stainless steel/Class K firewall TriStart connectors plus a unique clutch design that actually
tightens itself under vibration
10 (Power)
.137 ± .002
.355
+.004
–.000
+.004
–.000
+.004
–.002
+.004
–.002
.094
.125
.141
.141
NA
NA
FINISH DATA
Non-Hermetic Shell Components
Service Class
• Firewall capability - available in stainless steel shell, Class K
Finish
• Composite Tri-Start, qualified to MIL-DTL-38999, Rev. J offers a lightweight, corrosion resistant connector with the
same high performance features as it’s metal counterpart.
• Light weight: 17% – 70% weight savings
• Corrosion resistance: withstands 2000 hrs. of salt spray
exposure
• Durability: 1500 connector couplings
• Locksmith keying - 5 keyway polarization provides 5 alternate
rotations
Military
Proprietary
Anodic Coating (Non-Conductive)
C
RX***
Electroless Nickel
F
RF
Olive Drab Cadmium Plate Nickel Base
W
RW
Stainless Steel with Nickel Plate
S
RS
Stainless Steel
K
RK
Olive Drab Cadmium Plate, Composite
J
RW
Electroless Nickel Plate, Composite
M
RF
Hermetic Connectors
• Shell grounding fingers are standard on all plugs
Suffix
• Triple-web grommet seal
Material/Finish
Military
Proprietary
• DOD preferred
Stainless Steel
Y
Y
• Available in a Fail Safe Lanyard Release plug
Stainless Steel, Nickel Plate
N
YN
• See catalog 12-C1
*** Add suffix (005) to part number
NOTE:Catalog 12-C1 is Amphenol’s new catalog - combining
38999 Series I, II and II. These were formerly catalogs
12-090 (Series I, II) and catalog 12-092 (Series III)
Suggested Operating Voltage
(Sea Level)
Service
Rating
AC (RMS)
M
400
N
300
SERVICE RATING†
Test Voltage
(Sea Level)
Test Voltage
50,000 Ft.
Test Voltage
70,000 Ft.
Test Voltage
110,000 Ft.
550
1300 VRMS
550 VRMS
350 VRMS
200 VRMS
450
1000 VRMS
400 VRMS
260 VRMS
200 VRMS
DC
I
600
850
1800 VRMS
600 VRMS
400 VRMS
200 VRMS
II
900
1250
2300 VRMS
800 VRMS
500 VRMS
200 VRMS
† Please note that the establishment of electrical safety factors is left entirely in the designer’s hands, since he is in the best position to know what peak voltages, switching
surges, transients, etc. can be expected in a particular circuit.
21
Subminiature SJT
Features, Part Number Breakdown
• 100% scoop-proof – Basic LJT lengths
SJT How to Order
PART NUMBER
• Basic JT mounting dimensions
• Bayonet coupling
• 5 key/keyway polarization with 4 alternate keyings
To more easily illustrate ordering procedure, part number
SJT00RT-18-66PA( ) is shown as follows:
• Rear release crimp contacts
SJT
00
1
2
RT – 18
–
66
P
A
( )
5
6
7
8
• PCB, wire wrap, twinax and coax contacts available
• High density insert patterns available
3
4
• Shell grounding fingers are an option on the plug
• Options include Hermetics, Filters and Thermocouples
See code below:
• See catalog 12-091
1. Connector Type
SJT designates standard scoop-proof Junior Tri-Lock
Connector
SJTS designates high temperature connector
SJTG designates plug with grounding fingers
SJTP designates back panel mounted
2. Shell Style
00 designates wall mount receptacle
06 designates straight plug
07 designates jam nut receptacle
I
designates solder mount receptacle – hermetic
3. Service Class
“Y” for hermetic applications, fused compression glass
sealed inserts. Leakage rate less than .01 micron cu.
ft./hr. (1 x 10-7 cc/sec.) at 15 psi differential, with interfacial seal.
“RT” for environmental applications - supplied without rear
accessories. Design provides serrations on rear
threads of shells.
For additional information defining complete description of
service class, consult Amphenol, Sidney, NY.
4. SJT shell sizes available from 8 through 24.
5. – 66 designates insert arrangement
6. P designates pin contacts; S for socket contacts
7. A designates a rotated connector assembly (alternate keying). Other basic rotations are B, C and D. No letter
required for normal, (no rotation) position
8. Finish variation suffix
22
SECTION V
Cross Reference by MIL-Spec
to Competitor’s Part Number
MIL-DTL-5015 (Solder Type)
Typical Part No. - MS310X
MIL-DTL-26482 (Solder Type) Series 1
Typical Part No. - MS311X
Amphenol
ITT Cannon
Class
A, C, E, F, R
A, B
A, C, E, F, B, K, R
Proprietary
Part No.
(A.N.-M.S.)
Shell Size:
MS3100
MS3101
MS3102
MS3103
MS3106
MS3107
MS3108
GP, SC, SF
CS, SG, SB
SM, ACS
MS310X
or
97310X
CA310X
X
X
X
X
X
see 97 Series
X
X
X
X
X
X
X
X
Amphenol Proprietary Intermates: 10-214XXX, 10-244XXX
(Crimp types - front removal)
Amphenol Proprietary Non-Intermates: (5015 Type)
See also Heavy Duty Class “L”, Amphenol QWLD (MIL-DTL-22992),
catalog 12-052
See also Heavy Duty QWL, catalog 12-053
See also GT Series Reverse Bayonet Coupling, catalog 12-024
MIL-DTL-5015 (Crimp - Front Release)
Typical Part No. - MS340X
S.A.E.
Trans Tech
(Flight)
Cannon
DNS*
MOXD, MIXD
FF
WFS
Souriau
Cannon
PT
BT/851
KPT
Framatome Array
851-00
PW
Veam
VPT
MS3110
X
X
X
X
X
X
MS3111
X
X
X
X
X
X
MS3112
X
X
X
X
X
X
MS3113
X
X
X
MS3116
X
X
X
X
X
X
MS3114
X
X
X
X
X
X
Shell Style:
X
X
X
X
X
X
X
Amphenol
Amphenol
Type
X
MIL-DTL-26482 (Crimp - Front Release) Series 1
Typical Part No. - MS312X
Amphenol
Burndy
Cannon
Array
PT-SE
LTE, LTF
KP-SE
PWF
MS3120
X
X
X
X
MS3121
X
X
X
X
MS3122
X
X
X
X
MS3126
X
X
X
X
MS3124
X
X
X
X
MS3127
X
X
X
MS3128
X
X
X
Type
Shell Style:
Amphenol Proprietary Intermates: DC, SP, BP; also PT-CE.
MIL-DTL-5015 (Crimp - Rear Release)
Typical Part No. - MS3450X
Amphenol
ITT
S.A.E.
Trans
Tech
Aero
Electric
944X
CV345X
M5X
MS
AE
MIL-DTL-26482 (Crimp - Rear Release) Series 2
Typical Part No. - MS347X
ITT Cannon
10-194XXX
WLDX (shell sizes 18 & 32 only)
General Connector
10-473XXX
GLCXX
MIL-DTL-26500 (Crimp - Front Release)
Typical Part No. - MS24266X
48-XX
C48-XX
Corsair
MB1
PV
AFD
AE
CT097
MIL-DTL-81511 (Crimp - Rear Release) Series III & IV
Typical Part No. - M81511/4X
Amphenol
ZZ( ) -
Aero
348-
MIL-DTL-22992 Class L (Power Connector)
Typical Part No. - MS9055X
Cinch
Deutsch
Amphenol
Amphenol
Amphenol
Cannon
MIL-DTL-81511 (Crimp - Rear Release) Series I &II
Typical Part No. - M81511/0X
MIL-DTL-22992
Typical Part No. - MS1734X
Amphenol/
Pyle
Amphenol
Amphenol
Deutsch
DNS*
B815
MIL-DTL-83723 (Crimp - Rear Release) Series III
Typical Part No. - M83723/71X
RMS
R071X
Aero
AE66X
*DNS - Do not supply
23
Amphenol/Pyle
Amphenol/Matrix
Amphenol
Deutsch
BTX/BYX
MB3X/MT3X
518-
DL60X
Intermating Chart
Series
I & II
81511
Series
III & IV
81511
Series I & II 81511
X
X
Series III & IV 81511
X
X
All
5015
MIL Series
All 5015
All*
26482
All
26500
Series I
38999
Series II
38999
Series III
38999
Series I
27599
Series II
27599
Series I
83723
X
Series II
82723
Series III
83723
X
All 26482*
X
All 26500
X
X
X
Series I 38999
X
X
Series II 38999
X
X
Series III 38999
X
Series I 27599
X
X
Series II 27599
X
Series I 83723
X
X
Series II 83723
X
X
X
Series III 83723
X
* Except push pull coupling
Cross Reference by MIL-Spec to Competitor’s Part No.
MIL-DTL-38999 (Crimp Rear Release) Series I, II, III and IV
Amphenol
Cannon/Veam
G&H
American
Pyle-National
Deutsch
Souriau
American
Micro Products
I
LJT
KJL/LTT
–
TI
DJT
8LT
3C&B
II
JT
KJ
–
–
DJT
8T
XC7C-( )
III
TV-CTV
KJA/VTTG3XXX
G-300
T3
DTS
8D
X ( )C-(
IV
–
–
BLXX
–
DIV
–
Socapex
Amphenol
LTD
Aero
Electric
I
LJT
LJT
AE16
DJT
II
–
JT
AE27
DTL
III
TV
TV
AE32
ACT/DTS
IV
–
–
–
–
Herm Seal
Hi-Rel
Series
Series
Series
Sealtron
Deutsch LTD/
Dagan
Glenair
I
9150
7600
A9703
23X
II
9XXX
5X000
A980X
23X
III
HR
8000
A9903
23X
IV
–
–
–
23X
24
MIL-SPEC Cross Reference Data and General Information
MIL-Spec
Amphenol
Proprietary
Mates
Description
Contact
Termination &
Removal
Contact Sizes in
Series
(Wire Gauge)
Coupling
Method
Other
Notes
MIL-DTL-5015
Power type connectors, large contacts
Older series had solder contacts;
newer has crimp
CS, SM,
TBF 10-72XXX,
GP, SC, SF, SG, SB, FP,
10-214XXX,
10-244XXX,
10-87XXX, etc.
Solder or crimp,
front or rear removal
16 thru 0
Threaded
310X solder,
340X crimp F. R.,
345X crimp R. R.,
GT Series Reverse
Bayonet Coupling
MIL-DTL-26482
Miniature connector. Contacts are
medium size, both power and signal
currents, solder or crimp
PT, PT-SE, PT-CE, PTSDR, BP, SP, DC
Solder or crimp,
front or rear removal
20, 16, 12
Bayonet thread,
version Non-Military
311X solder,
312X crimp F. R.
347X crimp R. R.
MIL-DTL-22992
Power type connector, heavy duty.
MIL-C-5015 insert patterns, rugged.
Solder or crimp contacts
QWLD 10-193XXX,
Class L 10-473XXX,
HK - potted backshell
Solder for MS1734X,
Crimp for Military
Class “L”
16 thru 0
Threaded (quick
thread), double
stub
Class L Series is for
heavy power.
MS9055X Class “L”
MIL-DTL-83723
Series I mates with MIL-C-26482, 2
Series II mates with MIL-C-5015
Series III mates with MIL-C-26500
Refer to applicable series.
BTK, BTW, BTR, BTA,
BNK, BYK, BYR, BYW,
BYA, BTY, BYY
Crimp, rear removal
20, 16, 12, 8, 0
Threaded and
bayonet,
depending on
series
83723/1 thru 14,
36 thru 49 Series I,
17 thru 27 -29 -30
-33 -34 -35 -50 -52
-53 Series II,
7X -8X -9X Series III
Subminiature - medium and high
contact density, crimp contacts.
Series I - scoop-proof
Series I, LJT-R,
(Also see MIL-DTL-27599
solder)
Crimp, rear removal
22D, 20, 16, 12,
and coax sizes 8,
12, 16
Bayonet
Intermates with
Series I of MIL-DTL27599
Series II - lightweight, low profile
Series II, JT-R,
(Also see MIL-DTL-27599
solder)
Crimp, rear removal
22D, 20, 16, 12,
and coax sizes
12, 16
Bayonet
Intermates with
Series II of MIL-DTL27599
Series III - High performance, but
suited for general duty
Series III, TV-R, T3W,
Crimp, rear removal
T3K, T3F, T3S, T3N, T3Y,
Series III CTV - Composite
22D, 20, 16, 12,
and coax sizes 8,
12, 16
Threaded
Available in Class K
Firewall and Lanyard Release Breakaway
Series IV Breech-Lok,
expensive design, can be difficult to
mate
None
Crimp, rear release
22D, 20, 16, 12,
and coax sizes 8,
12, 16
Breech-Lok
Does not meet total
performance requirements of Series III
MIL-DTL-26500
Miniature connector. Contacts are
medium size, both power and signal, solder or crimp
ZZW, ZZL, ZZY, ZZB
Crimp, front removal
20, 16, 12
Bayonet and
Threaded
Intermates with
Series III of MILDTL-83723
MIL-DTL81511*
Subminiature - medium and high
contact density, crimp contacts.
Series I & II - front release contacts
Series III & IV - rear release contacts
348 Series
Crimp, front (gang) &
rear removal
22, 20, 16, 12
Bayonet
M81511/0X F. R.
M81511/4X R. R.
MIL-DTL-27599
Subminiature, similar to MIL-DTL38999 except has non-removable
solder contacts. Fully mateable with
MIL-DTL-38999
LJT-T, P - Series I
LJT-A, C, P - Series II
Solder
22, 20, 16
Bayonet
Intermates with
Series I and II of MILDTL-38999
* Series 1 crimp
*Series I, II & III
MIL-DTL-38999
* Denotes inactive
25
SECTION VI
Qualified Products List
by Connector Specification
QPL No./Date
QPL-5015-43
(6/07)
QPL-26482-100
(4/08)
QPL-83723-66
(11/06)
QPL-38999
(4/08)
QPL-22992-38
(1/08)
QPL-27599-14
(12/07)
QPL-26500-70
(12/05)
Qualified Product List
Amphenol, ITT Cannon
Series II, Front Release Crimp
MS3400 Series
ElecSys. Inc., J-Tech, TRW Cinch
Series III, Rear Release Crimp
MS3450 Series
Amphenol/Matrix, ITT Cannon, J Tech, Aero Electric, ElecSys. Inc.
Accessories only*
Glenair, Sunbank, Electro-Adapter, Electro-Sonic Components,
Raychem, Triangle Electronics
Series I, Solder
MS3110 Series
Amphenol, Array, ITT Cannon, Souriau
Hermetics only
Amphenol, ITT Cannon, Glasseal, Deutsch, Sealtron, CIA, Herm Seal
Series I, Crimp
MS3120 Series
Amphenol, Burndy, Cannon, Veam, Souriau, Array
Series II, Hermetic
(MS3400) Series
Deutsch, Glasseal, Herm Seal, Array, Sealtron
Series II, Crimp
MS3470 Series
Amphenol, Aero Electric, ITT Cannon, Deutsch, Corsair, Souriau
Accessories only*
Sunbank, Glenair, Array
Series I
Superseded by and transferred to MIL-DTL-26482 Series II
Series II
ITT Cannon
Series III
Amphenol, TRW Cinch, Deutsch, Pyle-National, Aero Electric,
ITT Cannon
Hermetics only
Connector Industries, Herm Seal, Sealtron
Accessories only*
Glenair, Joslyn Sunbank
Series I
Amphenol/Pyle, Amphenol Limited, Amphenol Socapex, Souriau, ITT Cannon,
Deutsch, Aero Electric, JEC, Hi Rel
Series II
Amphenol, ITT Cannon, Deutsch, Souriau, Aero Electric, Hi Rel
Hermetics only
Herm Seal, Sealtron, American Micro Products, Glenair
Series III
Amphenol, Amphenol Socapex, Amphenol/Pyle, TEC, Deutsch, Souriau,
ITT Cannon, Amphenol Limited, Deutsch LTD, Hi Rel, Aero Electric,
American Micro Products, Glenair
Series IV
G & H Technology, Deutsch, Glenair
Accessories only*
ESC, Joslyn Sunbank
MS17340 Series (QWLD)
Amphenol, ITT Cannon
Class “L” (MS90555) Series)
Amphenol, General Connector
38999 Solder
Amphenol
Miniature Cylindrical
Amphenol/Pyle, TRW Cinch, Aero Electric, Herm Seal, RMS
Accessories only*
Glenair, ESC
QPL-81511-9
(12/98)
QPL-AS39029-2
(7/07)
Manufacturer
Series I, Solder Type
MS3100 Series
Amphenol, Deutsch
MIL-C-26482 Series 1, Contacts
Amphenol/Pyle, Deutsch, ITT Cannon, Tri-Star, Cinch, Veam
MIL-C-26482 Series 2, Contacts
Amphenol/Pyle, Deutsch, ITT Cannon, Tri-Star, NCMI
MIL-DTL-38999, Contacts
Amphenol/Pyle, ITT Cannon, Tri-Star, AMP, General Connector
MIL-C-22992, Class “L”,
Contacts
Amphenol, General Connector
Other Contacts
May include all of the above, plus:
Continental Connector, AMP, J Tech. Precision Technology,
Winchester and others
* A General Note: Connector manufacturers also supply many of the accessories.
26
QPL listings change often. Manufacturers can be added or dropped at
any time. This listing is current at the time of the printing of this publication (See back cover for printing date).
Please check the current QPL when accurate information is required.
Amphenol®/Pyle®/Matrix® Quick Product Guide
Subminiature
Cylindrical Connectors
Miniature
Cylindrical Connectors
MIL-DTL-27599 Solder
MIL-DTL-26482 Series 1 Solder
Military #
MS20026
MS20027
MS20028
MS20029
MS27334
MS27335
MS27336
MS27337
Proprietary #
LJT00
LJT01
LJT06
LJT07
JT00
JT02
JT06
JT07
MIL-DTL-38999 Series I & II
Military #
MS27466
MS27467
MS27468
MS27469
MS27470
MS27472
MS27473
MS27474
MS27475
MS27476
MS27477
MS27478
MS27479
MS27482
MS27483
MS27484
MS27496
MS27497
MS27499
MS27500
MS27503
MS27505
MS27508
MS27656
Proprietary #
LJT00R
LJT06R
LJT07R
LJT00Y
LJT07Y
JT00R
JT06R
JT06R
JT00Y
JT02Y
JT07Y
JTIY
JTS00R
JTS00Y
JTS07Y
JTG06R
LJT02R
JTPQ00R
JT02R
JT08R
JTSIY
LJTP02R
JTP02R
LJTPQ00R
MIL-DTL-38999 Series III
D38999/20
D38999/26
D38999/24
D38999/21
D38999/23
D38999/25
D38999/27
D38999/29
D38999/30
D38999/31
Metal
TVP00R
TVP02R
TV06R
TV07R
TV01R
TV09R
TVPS02Y
TVS07Y
TVSIY
Composite (CTV)
CTVP00R
CTVP02R
CTV06R
CTV06R
CTV01R
Hermetic
TV Failsafe Lanyard
Release Plug
MIL-STD-1760 Plug
High Density 38999
Military #
MS3110
MS3111
MS3112
MS3113
MS3114
MS3114
MS3116
Proprietary #
PT00
PT01
PT02
PTIH
PT07
PT07
PT06
MIL-DTL-26482 Series 1 Crimp
Military #
MS3120
MS3121
MS3122
MS3124
MS3126
MS23127
MS3128
Proprietary #
PT00SE
PT01SE
PT02SE
PT07SE
PT06SE
MF02SE
MF00SE
MIL-DTL-26482 Series 2
Amphenol part # Matrix part #
MS3470
MS3471
MS3472
MS3474
MS3475
MS3476
PTS00DR
PTS01DR
PTPS00DR
PTS07DR
PTGS06DR
PTS06DR
MB10
MB13
MB11
MB14
MB16
MB18
Other Proprietary
(MIL-DTL-26482 Type)
PT-CE
SP
SP-SE
SP-CE
PC
Matrix MBL
PC-SE
PC-CE
RPT
MIL-DTL-83723 Series III
Available in Pyle or Matrix Part No.
M83723/71 thru /78
M83723/82 thru /92
M83723/95, /96
Matrix only: M83723/66 thru /69 Quick Disconnect
MB3, MT3
MIL-DTL-26500
MS24264
ZZY
MS24265
ZZW
MS24266
MS27613
BACC45FN, FT, FS, FM
MS27614
BACC63BP, BV
MS27615
BACC63CB, CC
Inserts with 30% higher densities
Other Proprietary 38999 Types
38999 with High speed shielded contacts
38999 with PCB contacts
38999 with High Frequency contacts
Clutch-Lok TV/MTV (for high vibration)
38999 with Flex circuitry
38999 Power with RADSOK® contacts
T-Line Series
Amphe-Lite Industrial
SJT (meets European Specifications)
MIL-C-81511
Military #
M81511/01E
M81511/03E
M81511/05E
M81511/06E
M81511/18
M81511/21E
M81511/23E
M81511/25E
M81511/26E
Proprietary #
348-40E
348-43E
348-41E
348-46E
348-140
348-30E
348-33E
348-31E
348-36E
Other Proprietary Miniature Types
67 Series
165 Series
Engine Connectors
(Class K Firewall)
D38999/20
BACC63BR/BT
D38999/24
BACC63CN/CM
D38999/26
M83723/82-92
ESC-10, 11
M83723/95, /96, /97
EN2997
ASN-EO
MIL-DTL-26500 types:
FPK, FPL, FP5K, FYL
27
Standard/Heavy Duty
Cylindrical Connectors
MIL-DTL-5015
Solder
MS3100
MS3101
MS3102
MS3106
MS3107
MS3108
97 Series
Solder
97-3100
97-3101
97-3102
97-3106
97-3107
97-3108
97 Series
Crimp
97-4100
97-4101
97-4102
97-4106
97-4107
97-4108
97 Series is UL Approved file E115497(N) and
CSA Approved certification file LR69183
Matrix MIL-DTL-5015, Series III
Crimp Rear Release
MS3450
MS3451
MS3452
MS3454
MS3456
MS3459
9440
9441
9442
9444
9446
9816
9817 Quick Disconnect
9818 Quick Disconnect
Proprietary GT Series (5015 inserts)
(Reverse Bayonet)
GT-A
GT-G
GT-AF/F
GT-R
GT-CF/CFZ GT-RV
GT-CFGG
GT-E
GT-LCF/LCFZ
GT-AGG
GT-PP
GT-PC
GTC-M
Vortex GT
Proprietary ACA-B Series
ACA-B Reverse Bayonet (5015 inserts)
Proprietary AC Series
AC Threaded (5015 inserts)
Heavy Duty
QWLD
Class L
MS17343
MS90555
MS17344
MS90556
MS17345
MS90557
MS17346
MS90558
MS17347
MS17348
Pyle Star-Line (UL, CSA listed)
Pyle Star-Line EX (certified for use in
Zone 1-IIC hazardous environment)
Pyle Star-Lok (UL, CSA listed)
Amphe-EX (ATEX and IECex rated)
RIG-Power & VFD rated inserts
Other Proprietary Standard
and Heavy Duty Types
Commercial Aircraft types:
DC Series and 10-244 Series
BT-M, BT-MA and BT-RA
Other Proprietary types:
Pre-Earth FMLB Series, 7 Series,
MS Modified types,
QWL, QWP Heavy duty types
Amphe-Power Connectors with
High Amperage RADSOK® Sockets
Amphe-Power P-Lok
Amphe-Power GT (Amphe-GTR and
Power GT)
Amphe-Power 5015 (AC Series)
Amphe-BU, Amphe-Armor, Amphe-Y
RADSOK® technology is being incorporated into Mil-Aero products:
Rectangulars and LRM, 38999, 5015
RADSOK® Busbar Products
Amphe-PD
SurLok
Tru-Loc
Amphe-Base
Amphe-Com
RADLOK
RADSERT
PGY
PowerBlok
Amphenol®/Pyle®/Matrix® Quick Product Guide
EMI Filter/Transient
Protection Devices
FTV
FJT
FLJT
FSJT
FBL
FPT
-
Intermateable with/Features of
MIL-DTL-38999 Series III
MIL_DTL-38999/27599 Series II
MIL-DTL 38999/27599 Series I
Proprietary SJT
MIL-DTL-38999 Series IV
MIL-DTL-26482 Series 1 & 2
MIL-DTL-83723 Series I
Other EMI/Transient Protection
MOV’s
Hermetic Filters
Diodes
Filter Adapters
EMP
Filtered Plugs
“AN” Filters
Amphenol Canada Filter Products:
485 Series Filtered ARINC 404 & 600
MIL-DTL-24308 Filter D-Subs
MIL-DTL-83513 Micro D-Subs
Fiber Optic Products
Fiber Optic Termini:
MIL-PRF-29504/4 & /5 Multi-mode size 16
Multi-mode, HD20
MIL-PRF-20504/4 & /5 Single mode size 16
90° Multi-mode size 16
ARINC 801
MT ferrule
Fiber Optic Cylindrical Connectors Tri-Start, MIL-DTL-38999 Series III
Incorporating MIL-PRF-29504 or ARINC 801 or
MT termini
Fiber Optic Bulkhead Feed-through
Fiber Optic Rectangular Connectors:
PCB - Brush & Fiber Optic Combinations
LRM - Brush & Fiber Optic Combinations
VMEP0/J0, Ruggedized VITA-46
Fiber Optic Rack & Panel Connectors:
ARINC 600, R27 and R58 Series
Other Fiber Optic Products
Fiber Optic Cable Systems
MFM Family: Hermaphroditic, Duplex, Simplex
TFOCA-II
CTOS, CTOL, AXOS Field Deployable Lens
ST Fiber Optics
MIL-PRF-NGCON
MTRJ Field
Tactical Optical Splice
Fiber Optic Termination Tools
Printed Circuit Boards
and Flex Circuitry
Design formats of Mentor, PADS, Cadence,
Zuken. Panel thickness: .500”
Panel Sizes: 24” x 54”, 30” x 44”, 36” x 42”
Layer count up to 64
Interconnect formation types: back drilled,
dual dia., thru hole, blind, electrically isolated,
buried, SMT
Many other options and material choices
Flexible and Rigid-Flex
For attachment to Printed circuit boards:
Press fit connectors
Cylindricals with PC Tail contacts
Universal Header Assemblies
Flex Circuit Assemblies
Printed Circuit Bd. Terminal Blocks
Wiring Interface Modules
We invite you to visit our websites where you
can find product catalogs that can be downloaded and printed. Catalogs will be added
and updated on an on-going basis.
Board Level
Rectangular Connectors
MIL-DTL-55302
with Bristle Brush Contacts
M55302/166
M55302/167
M55302/168
M55302/169
M55302/169
M55302/170
MB ( )-( )P
MB ( )-( )W
PC ( )-( )P
IO ( )-( )C
IO ( )-( )P
DB ( )-( )P
MIL-DTL-55302
with Crimp, Solder or PCB Contacts
M55302/67-69
M55302/70-71
M55302/76-77
M55302/74-75
M55302/72-73
PCB90A
PCB100A
PCB100B
PCB100C
PCB150A
High Density Rectangular Connectors
HDB3 Mother Board/Daughter Board
HiLinx
Viper
LRM Surface Mount
with Bristle Brush Contacts
Module and Backplane connectors with
standard Brush contacts
Staggered Grid - 180 contact pattern grid
GEN-X Grid - 236 contact pattern grid
SEM-E or custom form factors
Air-flow inserts for wider boards
LRM can incorporate Fiber Optics,
RF contacts, shielded high speed contacts,
in combinations with Brush contacts
LRM with flex circuitry
LRM power supply modules
VME Rectangular Products
Ruggedized VME64-X
Ruggedized VME P0/J0
Backplane Connectors
with Tuning Fork & Blade Contacts
UHD (Ultra High Density) Connectors
NAFI (Daughtercard/Backplane Conn.
Other Rectangular Connectors
I/O NAFI Series
LMD and LMS Modules
Amphenol AirLB SIM Modulars
SIHD, SIAL Interconnects
VITA -46
Heat Sink Manufacturing
Amphenol Canada products: R39, R58
and SD308, CD308
Special Purpose
Interconnection Products
Hermetics
Available in the following series:
MS Standard MIL-DTL-5015
Miniature MIL-DTL-26482
Subminiature MIL-DTL-38999, I, II, III
Breakaway/Lanyard Release
Available in the following series:
Fail-Safe Subminiature MIL-DTL-38999
Twist-Pull Miniature MIL-DTL-26482
Quick Disconnect Matrix MIL-DTL-83723
Quick Disconnect Matrix MIL-DTL-5015
Stores Management Type II, Rail Launch
1760 Weapons Release
Gatelink Breakaway
Battlefield Interconnects & Cables
Stinger Missile types
EMC Protected & Over-molded Cable
Sincgars, Bowman Program Connectors
Wind Corrected Munitions Dispenser
Rail Mass Transit/Industrial
Interconnects & Cables
Freight-Mate Cable Assemblies
Trans-Power & 27 Pole Train-Line
Over-molded Cable available with any
Amphenol cylindrical industrial connector
Data Bus Products
Can Couplers, Box Couplers
ARINC 629 Current Mode Couplers
Wire Integrated Connectors (W.I.C.s)
711 Data Bus
Other Special Purpose Products
RJ Field, USB Field, MTRJ Field, EZ Field
Amphenol Nexus Technologies Products
for Audio Frequency Protection
SV Microwave Connectors
Aquacon Immersible
Pyle Pon Series Indicator Lights
WFRS Interlocked Safety Switches
Astronaut Zero-G Connectors
PMAT (ARINC 644)
Geophysical Miniatures
SCE and Mini SCE Push Pull
PPM Push-Pull
Shorting Plugs
Micro-Miniature Connectors
ECTA 133, ECTA 544
Quick Connection Modules
1900 Rectangulars
AT Series Circular J1939 Diagnostic.
Backplane Systems
Electrical and Optical Backplane Systems that
can incorporate:
MIL-DTL-55302 brush contacts
NAFI fork and blade contacts
UHD fork and blade
ARINC
MIL-DTL-38999 Cylindricals
MT Optical Ferrules
Rack & Panel Connectors
Rectangular Rack and Panel:
Ruggedized, Non-Floating Brush
LPSRC, SR
217 Series
LE, LPX Series
ARINC 404, ARINC 600
R27 Series
RFM Modular Series
Micro D-Subs
Cylindrical Rack and Panel:
RNJ Series
28
Contacts and
Accessories
Crimp M39029, Thermocouple, Wire wrap,
Coaxial, Twinax, Triax, Quadrax and
Differential Twinax Shielded Contacts
Bristle Brush Contacts for Rectangulars
Fork & Blade Contacts for Rectangulars
Fiber Optic Termini
RADSOK® Contacts for High Amperage
High Frequency Contacts with “Float
Mount Technology
AT Series Contacts
M85049 Accessories
Backshells
Industrial Cord Grips and Cable Glands
Pipe & Cable Supports
Relay Sockets and Junction Modules
www.amphenol-aerospace.com
www.amphenol-industrial.com
www.amphenol-abs
SECTION VII
Connector:
A device providing electrical
or signal connection.
It consists of a plug and receptacle.
Know the Language
Common terms you should know
(listed alphabetically)
• Accessories - Mechanical devices, such as cable added to
connector shells and other such hardware that are attachable to connectors to make up the total connector configuration; while providing wire support and/or wire sealing
• Bayonet Coupling - A non-threaded, ramp type of
coupling
• Cable Assembly - A cable with plugs or connectors on each
end
• Configuration - Arrangement of contacts in a multiple-contact connector
• Contacts - Mechanical component to which electrical
engagement is accomplished
• Contact Size - (Also known as Wire Gauge) - the largest
wire that can be used with a specific contact
• Contact Spacing - The distance between the center-lines of
adjacent contact areas.
• Coupling Nut - Outer threaded or grooved ring which holds
mated pair together
• Crimp Contact - A contact to which wire is joined by
mechanical squeeze
• EMI or RFI Backshell - A type of accessory to terminate
wire shielding
• Environmentally Sealed - Connector provided with gaskets, seals, potting or other devices to keep out moisture,
dirt, air or dust that might reduce its performance
• Extraction/Removal Tool - A handheld tool used for removing a contact from a connector.
• Fiber Optic Termini - Comparable to electrical pin and
socket contacts, except they transmit data optically through
fibers instead of electrically through wires.
• Gland - Resilient ring in rear accessory, provides seal on
jacketed cable
• Grounding Fingers - A metal strap around plug shell for
positive shell-to-shell conductivity/shielding
• Grommet - Resilient part at back of insert (attached or separate); gives wire moisture seal
• Hermetic - A connector with fused glass insert for air
tightness
• Insert - The dielectric or insulating inner core, holds
contacts
• Insert Arrangement - The number, spacing and arrangement of contacts in a connector
• Insertion Tool - A small, handheld tool used to insert contacts into a connector
• Interfacial Seal - A resilient part on the face of pin inserts
which provides moisture seal.
• Jam Nut - Hex nut that holds receptacle to a panel
• Mating Pair - Two connectors that couple together. Shell
size insert arrangement and rotation must be compatible
• Mating/Unmating Forces - Torque required to couple/
uncouple a mating pair of connectors or contacts
• “O” Ring - Doughnut-shaped ring of rubber used as a seal
around the mating insulator interface of cylindrical
connectors
• Pin Contact - Male half of a mated pair of contacts*
• Plating - The metal finish applied to contacts and or shell
components (protective) to resist corrosion and wear
• Plug - The cable/coupling half of a mating pair
• Potting Boot - A type of accessory which forms a mold for
potting compound
• Rear Termination - An accessory which threads to back of
shell
• Receptacle - The panel/receiving half of a mating pair
• Sealing Plug - Plastic type slug, placed in unused grommet
holes to seal
• Service Rating (Also known as Current Rating) - The
maximum voltage or current that a connector is designed to
carry continuously.
• Shell - Houses insert and contacts
• Socket Contact - Female half of a mated pair of contacts
• Solder Contact - A contact to which wire is joined by soldering. Has a cup, hollow cylinder, eyelet or hook to accept a
wire for conventional soldered termination.
• Strain Relief (Also known as Cable Clamp) - A type of
accessory which clamps wires for support
*Note: Male half always goes into female.
29
SECTION VII
Know the Language - Other Interconnection Product Terms
• Alternate Rotations - In cylindrical connectors: Rotation of
either an insert or designated key/keyway locations (Alternate
Keying) in a connector shell to a different angle than normal
position. Allows for variations of mating two halves of cylindrical connectors.
• Anodize - Formation of a protective, insulating oxide layer on
metal bay electrolytic action.
• Arc Resistance - The characteristic of insulating materials to
resist carbonization (also known as tracking) of the material
surface between electrodes resulting from voltage breakdown.
• Attenuation - (this term is used in Filters) The ratio of the
input to output power levels in a network (transmission line)
when it is excited by a matched source and terminated in a
matched load.
• Back-mounted - When a connector is mounted from the
inside of a panel or box with its mounting flanges inside the
equipment.
• Circuit - A complete path or electron flow from a negative terminal of voltage source through a conductor and back to the
positive terminal.
• Closed Entry Socket Contacts - A female contact designed
to prevent the entry of a pin or probing device having a crosssectional dimension greater than the mating pin.
• Coaxial Cable - A high-bandwidth cable consisting of two
concentric cylindrical conductors with a common axis that is
used for high speed data communication and video signals.
• Compliant Contact - A press-fit type contact used to attach
to a printed circuit board. Has an eyelet end.
• Conductivity - The ability of a material to conduct electric
current, expressed in terms of the current per unit of applied
voltage. It is reciprocal of resistivity.
• Contact Durability - Endurance measured by the number of
insertion and withdrawal cycles that a connector withstands
remaining within its specified performance level.
• Contact Engaging and Separating Force - Force needed to
either engage or separate pins and sockets when they are
out of connector inserts. Values are generally established for
maximum and minimum forces.
• Contact Resistance - Maximum permitted electrical resistance of pin and socket contacts when assembled in a connector under typical service use.
• Contact Retention - The minimum axial load in either direction that a contact must withstand while remaining firmly fixed
in its normal position within the connector insert or housing.
• Continuity - A continuous path for the flow of current in an
electrical circuit.
• Corrosion - The destruction of the surface of a metal by
chemical reaction.
• Coupling Torque - Force required to rotate a coupling ring or
jackscrew when engaging a mating pair of connectors.
• Diallyl Phthalate (DAP) - (Blue insert in 97 Series) A thermosetting plastic that offers outstanding dimensional stability
and resistance to most chemicals and chemical compounds.
• Dielectric - Any insulating medium that intervenes between
two conductors.
• Dielectric Withstanding Voltage - Maximum potential gradient that a dielectric material can withstand without
failure.
• Discontinuity - A broken connection or the loss of a specific
connection characteristic.
• Edge Connector - One piece receptacle, containing female
contacts designed to receive the edge of a printed circuit
board and interconnect on which the male contacts are
etched or printed. The connector may contain either a single
or double row of female contacts.
• Edgeboard Connector - A connector that mates with printed
wiring leads running to edge of a PC board.
• Feed-through - A conductor that connects patterns on opposite sides of a PC board. Also called interfacial
connection.
• Fiber Optics - A data transmission medium consisting of
glass fibers. Light-emitting diodes send light through the fiber
to a detractor, which then converts the light back into electrical signals.
• First Article - A sample part or assembly manufactured prior
to the start of production for the purpose of assuring that the
manufacturer is capable of manufacturing a product that will
meet the requirements.
• Front-mounted - A connector is front-mounted when it is
attached to the outside or mating side of a panel. (Can only
be installed or removed from the outside of the equipment.
• Front Release Contacts - Connector contacts are released
from the front side of the connector and then removed from
the back wire side of the connector. The removal tool
engages the front portion of the contact and pushes it out the
back where it is removed by hand.
• Harsh or Hostile Environment Connector - A connector
designed and engineered for operation in hostile environment
conditions, such as extreme high temperatures of 677°C
(1,250°F), extreme low temperatures of absolute zero and
severe water tight conditions.
• Header - A feed through device that introduces a conductive
path through an insulating plate.
• Hermaphroditic Connector - Interconnecting device in
which both mating parts are identical at their mating surfaces.
(Also called Sexless Connector)
• Hermaphroditic Contact - A contact in which both mating
elements are precisely alike at their mating face.
• Input/Output Connector - A mating pair of connectors used
to carry signals into and out of a panel-mounted subsystem.
An example is connector pair that interconnects the individual
back panels in a large array of panels.
• Insert Retention - Axial load in either direction that an insert
must withstand without being dislocated from its normal position in the connector shell.
• Insertion Force - The effort, usually measured in ounces,
required to engage mating components.
• Interchangeable - Characteristic of connectors in which one
manufacturer’s connector can be replaced by the connector
of another manufacturer and provide the same function in the
same panel space as the connector it is replacing.
• Intermateable - Characteristic of connectors in which a connector half manufactured by one connector will mate directly
with a connector half manufactured by a different company
30
SECTION VII
Know the Language - Other Interconnection Product Terms
• .Keying - Mechanical arrangement of guide pins and sockets, keying plugs, contacts, bosses, slots, keyways, inserts or
grooves in a connector housing, shell or insert that allows
connectors of the same size and type to be lined up without
the danger of making a wrong connection.
• Lanyard - A device attached to certain connectors that permit
uncoupling and separation of connector halves by a pull on a
wire or cable.
• Life Cycle - A test that indicates the time span before failure;
the test occurs in a controlled, usually accelerated, environment.
• Mass Termination - Method of termination in which terminals that pierce flat cable insulation without stripping to cold
flow mate with conductors and form a metal-to-metal joint.
• Motherboard - A printed board used for interconnecting
arrays of plug-in electronic modules.
• Operating Temperature - Maximum internal temperatureresistant capabilities of a connector in continuous service.
• Outgassing - De-aeration or other gaseous emission from a
printed board assembly (printed board, component of connector) when exposed to a reduced pressure or heat, or both.
• Panel-mount - Fixing a connector half to a board, panel or
frame. Usually, the female portion of the connector is
mounted, and the male half is the removable portion.
• Plated Through-Hole - A hole-formed deposition of metal on
the sides of the hole and on both sides of the base to provide
electrical connection from the conductive pattern on one side
to that on the opposite side of the PC board.
• Poke-Home Contact - Term applied to a male or female contact to which a wire has been permanently affixed prior to the
assembly of the contact into the insert.
• Positioner - Device attached to the crimping tool to position
conductor barrels between the indentors.
• Potting - Sealing of a component (for example the cable end
of a multiple contact connector) with a plastic compound or
material to exclude moisture, prevent short circuits and provide strain relief.
• Pre-tinned - Solder applied to an electrical component prior
to soldering.
• Pre-tinned Solder Cup - Solder cups with inner surfaces that
have been pre-coated with a small amount of tin lead solder
or RoHs approved solder.
• Press-fit Contact - Either a solid pin or a pin having a compliant member that makes an interference connection with a
through-hole on a PC board. The pressure developed
between interconnecting surfaces is sufficient to provide gastight electrical reliability without the use of solder.
• Qualified Products List (QPL) - A list of commercial products that have been pretested and found to meet the requirements of a specification, especially government
specifications.
• Quick-disconnect Coupling - A design feature, apparent in
the quick-disconnect connector; it permits relatively rapid
joining and separation.
• RADSOK® Contact* - A unique socket contact design with a
stamped and formed twisted inner grid. Socket cylinder within
the female contact has several equally space longitudinal
beams twisted into a hyperbolic shape. As male pin is
inserted, axial members in the female half deflect, imparting
high current flow across the connections.
• Ramp - The sloped channel that accepts the detent pin in a
bayonet connector.
• Rear Release Contacts - Connector contacts are released
and removed from the rear (wire side) of the connector. The
removal tool engages the contact from the rear and pulls the
contact out of the connector contact retainer.
• Rear Seal - Design feature that provides an environmental
seal at the rear of plug or receptacle.
• Removable Contact - A contact that can be mechanically
joined to or removed from an insert. Usually, special tools are
required to lock the contact in place or remove it for repair or
replacement.
• RoHS (Restrictions of Hazardous Substances) - The
RoHS Directive bans the placing on the EU market of new
electrical and electronic equipment containing more than
agreed levels of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated
diphenyl ether (PBDE) flame retardants.
• Scoop Proof - Design feature whereby exposed contacts of
a connector cannot be touched or damaged by any portion of
the mating connector.
• Serrations - Small grooves or indentations within a terminal
wire barrel that increase the tensile strength and electrical
conductivity of the crimped termination.
• Soldering - Process of joining metallic surfaces with solder,
without the melting of the base metals. Soldering is an economical, versatile and fast termination method. A soldered
connection has metallic continuity and excellent long term
reliability.
• Splice Connector - A joint connecting conductors with good
mechanical strength and good conductivity; a terminal that
permanently joins two or more wires.
• Surface Mounting - The electrical connection of components
to the surface of a conductive pattern without utilizing component holes.
• Thermal Shock - The effect of heat or cold applied to a
material at such a rate that non-uniform thermal expansion or
contraction occur. In connectors, the effect can cause inserts
and other insulation materials to pull away from metal parts.
• Thermocouple Contact - A contact of special material used
in connectors employed in thermocouple applications. Materials often used are iron, constantan, copper, chromel and
alumel.
• Tuning Fork Contact - U-shaped female contact that resembles a tuning fork. It can be stamped or formed.
• Umbilical Connector - A connector used to connect cables
to a rocket or missile prior to launching, and which is removed
from the missile at the time of launching.
• Wire-Wrapped Connection (Also known as Solderless
Wrap) - A solderless connection made by wrapping bare wire
around a square or rectangular terminal with a power or hand
tool.
31
* RADSOK® is a registered trademark of Amphenol Industrial Operations.
SECTION VII, cont.
Basic Questions to Determine Connector Requirements
• How many conductors (wires) and what are the
wire gauges (size)?
Smallest contact sizes available by Military Specifications:
MIL-DTL-5015 - size 16
MIL-DTL-22992 - size 16
MIL-DTL-26482 - size 20
MIL-DTL-38999 - size 22D
• What type of plating or finish is preferred?
Common platings or finishes:
– Olive drab cadmium
– Nickel
– Black zinc alloy
– Electroless nickel
– Anodic coating
• Will you need accessories?
– Cable clamp
– Bushing
– Protection caps (metal or plastic)
– Dummy receptacle
• What’s your working voltage requirement?
See catalog insert arrangement table
Catalog 12-024 ....GT Reverse Bayonet
Catalog 12-020 ....MIL-DTL-5015
Catalog 12-026 ....MIL-DTL-5015 Matrix
Catalog 12-052 ....MIL-DTL-22992 Class L, QWLD
Catalog 12-053 ....MIL-DTL-22992 QWL
Catalog 12-070 ....MIL-DTL-26482, Series 1
Catalog 12-071 ....MIL-DTL-26482, Series 2
Catalog MS-102 ...MIL-DTL-83723, Series III Pyle
Catalog 12-073 ....MIL-DTL-83723, Series III Matrix
Catalog 12-090* ...MIL-DTL-38999, Series I, II
Catalog 12-092* ...MIL-DTL-38999, Series III
• Are you using an electrical or signal connector?
POWER
MIL-DTL-5015 and Amphenol GT Reverse Bayonet
– Standard contacts or (High Amperage) RADSOK®
MIL-DTL-22992
MIL-DTL-26482
MIL-DTL-38999 Series I, II, III
Hermetic
MIL-DTL-26482
MIL-DTL-83723
MIL-DTL-38999 Series I, II, III
• Are you using your connector in a benign environment or a harsh environment?
Harsh environment - will need gaskets, grommets
and/or glands for environmental sealing
SIGNAL
MIL-DTL-5015
– High Frequency contacts
MIL-DTL-22992
– High Frequency contacts
MIL-DTL-38999, Series I, II, III
– High Frequency contacts
– Fiber Optics
Brush Technology
– Rectangular PCB
– LRM
– Fiber Optics
• Do you want to Solder or Crimp your wires?
• Are you going cable to cable or cable to panel?
Cable plug to Cable receptacle use:
– Straight plug with Inline cable receptacle
– 90° Plug with Inline cable receptacle
Cable plug to Panel receptacle use:
– Straight plug with either a wall mount receptacle,
box mount receptacle, or jam nut receptacle
– 90° plug with either a wall mount receptacle, box
mount receptacle, or jam nut receptacle
Filter
MIL-DTL-38999 Series I, II, III
MIL-DTL-26482
• What’s your cable outer diameter (OD)? Or are
you using discrete wires?
Hermetic
MIL-DTL-26482
MIL-DTL-83723
MIL-DTL-38999 Series I, II, III
• Do you have any material restrictions?
– RoHS requirement
– Stainless steel
– Aluminum
– Neoprene
– Silicon
– Viton
NOTE: Socket contacts are to be used in the connector
feeding the power
NOTE: Not all connectors are limited to solely either power
or signal. Many connectors can perform both functions.
* Catalog 12-C1 combined catalog for 38999 Series I, II and III Connectors
will replace catalog 12-090 (Series I, II) and catalog 12-092 (Series III).
Consult Amphenol Aerospace for the availability of this new catalog.
32
SECTION VII, cont.
What do you need to Sell?
✓ A Basic Product Knowledge
• Why connectors are needed
•
•
•
•
Nomenclature (component parts)
Typical terms or descriptive words
Pertinent references to MIL-Spec
Cross reference Amphenol P/N to MIL P/N
✓ A Catalog
• Know how it is organized
• Keep it current
• Add your own notes for reference
✓ Know Our Websites
•
✓
•
•
•
•
•
Conclusion
www.amphenol-aerospace.com
www.amphenol-industrial.com
Quickly navigate on-line to • Connector Catalogs
• Service Instructions
• Your Contact Information
• Markets Served
• Connector Basics has this brochure and other
valuable basic connector information
• Amphenol One for Distributor Information and
Latest Product News
Know Your Organization and Ours
Who has pricing & delivery data
Who has technical data
Who can expedite
Who can negotiate
A back up for each of the above
The data in this booklet was designed to provide you with
basic information on Amphenol connector products.
In order to effectively sell, it is important to remember that
knowing your customer and your product go hand in hand.
The sale begins with you!
We have a great line, you can sell on the quality that it is.
Don’t promise more than you can deliver, simply tell it like it
is. You may lose some sales, but your credibility will grow.
✓ Know Yourself and Your Competitors
•
•
•
•
•
What is negotiable at your account
What are your strong points
What are your weak points
What are your protection points
Who is your competition
✓ Know Your Customers
• What are their Needs?
• Company Needs – Personal Needs
✓ Learn to Listen (and to See)
• What are they saying?
• What do they mean?
– How they say it may mean more than what they say
– What you both see may say more than conversation
✓ Each account is unique
• Don’t use a carbon copy approach
• Let your customers know you see them that way
✓ Take time to know the people you deal with
• Both at your account and your facility
• Manage your time and territory like assets
• If business or potential isn’t there, maybe you shouldn’t be
33
AMPHENOL CORPORATION
Amphenol Aerospace Operations
Amphenol Industrial Operations
L-1102-7
Printed in U.S.A.
JCP
607-563-5011
40-60 Delaware Avenue
Sidney, New York 13838-1395
9/08
34
工商网监
湘ICP备2023018690号
