PT6KH-504A2020-PM-

PT-6 6 mm Carbon Potentiometer FEATURES – Carbon resistive element. – IP54 protection according to IEC 60529. – Polyester substrate. – SMD version available (see PS-6 datasheet). – Also upon request: • Wiper positioned at initial, 50% or fully clockwise. • Supplied in magazines for automatic insertion. • Long life model (10K cycles). • Housing available in self extinguishable plastic (UL94V0). • Mechanical detents. MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS – Range of values* – Mechanical Rotation angle: 235° ± 5° – Electrical Rotation angle: 200° ± 20° – Torque: 0.2 to 2 Ncm. (0.3 to 2.7 in-oz) – Stop torque: > 4 Ncm. (> 5.6 in-oz) – Life*: Up to 10K cycles ± 20% ± 30% – Standard tolerance*: – Max. Voltage: 100 VDC (lin), 50 VDC (no lin) – Nominal Power 50°C (122°F) (see power rating curve) 0.1 W (lin) 0.05 W (no lin) – Taper*: Lin; Log; Alog (Log & Alog. only Rn 1K) – Residual resistance*: – Equivalent Noise Resistance: * Others check availability. – Operating Temperature**: -25°C +70°C (-13°F +158°F) ** Up to 85°C depending on application. HOW TO ORDER OPTIONAL EXTRAS PT-6 K V 221 A 2020 Series Mounting method Taper PT-6 H=Horizontal adjust V=Vertical adjust A = Lin. B = Log. C = Alog. Rotors Value K M W X (See note 1) 000 = CM Detents Shaft/knob E= Long life P04 P06 P08 P10 - = Fig. 1 02 = Fig. 2 03 = Fig. 3 6172 = arrow (See note 4) Tolerance 3030 = ±30% 2020 = ±20% 1010 = ±10% 0505 = ±5% (See note 2) NOTES: Life Magazines Knob/shaft/rotor colour RO = Red NE = Black VE = Green AZ = Blue GR = Grey SC = Not crimped Wiper position (See note 6) PM = 50% T PF = Final position (See note 5) (See note 3) (1) Adjust. type: «X» is only available with horizontal adjusting method. (2) Value: – Code: 22 1 = – 000 = CM = switch version (contact us) Number of zeros First two digits. (3) Tolerance (non standard, custom): check availability............ Code eg.: + 7 = 07 –5 05 Negative tolerance Positive tolerance (4) Life: • Standard = 1000 cycles • Long = 10K cycles (non-detented models) (5) Only for “V” mounting method. “W” rotor with shaft Fig. 2 is not available in maganizes . (6) Potentiometer without knob or shaft, only the rotor. Potentiometer with knob or shaft, only the knob/shaft. Default colour for knob/shaft is cream. Shaft only available in cream or black colour. Online product configurator: https://piher.net/configurator/2017/08/24/pt6-6-configurator-potentiometer/ www.piher.net Crimping 36 HOW TO ORDER CUSTOM DRAWING STANDARD OPTIONS Packing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bulk PT-6 KV + DRAWING NUMBER Rotor colour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . White (Max. 16 characters) Wiper position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Initial This way of ordering should be used for options which are not included in the "How to order" standard and optional extras. Crimping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes Knob colour . . . . . . . . . . . . . . . . . . . . . . . . . . . . White Mechanical life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000 cycles ROTORS +0.07 -0.03 6 1.8 ±0.1 1.8 ±0.1 6 0.6 4.3 ±0.05 4.3 0.6 0.65 1.85 0.6 ±0.05 ±0.1 ±0.1 1.8 1.4 A A 2.5 M K Hexagonal thru hole Cross slot thru hole Upon request 0.7 ±0.05 0.7 ±0.05 2.5 W = Adjustable from terminal side X = Adjustable from collector side With inserted knob / shaft. Default knob is ref. 5155 Wipers are shown positioned at 50% for the picture MOUNTING METHODS. VARIATIONS V = Horizontal mounting / Vertical adjust 3.3 4 1.8 ±0.1 3.5 6.3 +0.1 0.9 +0.1 2.5 E 3.3 A 2.5 2.5 A 0.6 2.5 2.5 S 2.5 2.5 2.5 2.5 7.3 0.7 ±0.05 H = Vertical mounting / Horizontal adjust 1.8 ±0.1 6.3 3.5 +0.1 +0.1 5 4.5 0.6 0.9 3.3 A 0.7 ±0.05 2.5 5 TAPERS DETAIL A 2.5 +0.1 OPTIONS Special Function Positioning A = Linear B = Log. C = Alog. 1.6 A 50% ±35° 3.3 C A 0.8 B INITIAL CCW Terminals 0.25 Collector www.piher.net 45° X X SPDT. function 0.30 37 FINAL CW Std. Position = CCW SMD VERSION NOT-CRIMPED TERMINALS DIMENSIONS SMD / SMT version available: See N-6 and PS(x)-6 product datasheets at: www.piher.net 4 3.5 0.3 3.3 0.25 4 8.35 4.35 4.40 7.5 0.7 STANDARD DETENT CONFIGURATIONS Relative detent positions along the total mechanical travel. P04 P08 P06 P10 Examples of custom configurations. NOTES FOR DETENTED VERSIONS: (1) All detented versions will be studied case by case. Contact Piher for leadtimes and availability. (3) Standard mechanical life: 100 cycles. (4) Long life versions are available under request and have the following characteristics at Tª: - Potentiometers with 1 to 3 detents: up to 10K cycles. - Potentiometers with 4 and more detents: up to 5K cycles. (2) Others check availability. Unless otherwise specified the detents are evenly spaced (using the end points as reference). (5) For more than 10 detents versions please contact your nearest PIHER authorised distributor. Detent torque can vary from 1.2 to 2.5 times the standard potentiometer torque. PACKAGING PT-6 DUAL GANG VERSION BOXES Ref.: 6060 Magazines for PT-6 V with or without crimp. For PT-6 dual gang version contact your nearest PIHER supplier 530 9.5 Model 17.5 5 8 All Units 1.000 AUTOMATIC INSERTION Magazines for PT-6 WV with or without crimp. 13 Magazines 530 2.5 PT-6 V & PT-6 WV 8 5 Units per magazine 80 Pieces KNOBS If you wish to use your own custom plastic shaft/knob/actuator please contact Piher for advice about compatible materials. Ref.: 5155 / Fig. 1 Ref.: 5141 / Fig. 3 Default knob. Standard colour: white. Colour: grey. For other colours check availability. 6.3 6.3 6 6 4.3 4.3 1.87 3.4 2.2 0.64 2.35 0.8 2.54 1.2 R1 www.piher.net 1.2 2.2 R1 38 1.87 SHAFT / KNOB Ref.: 6172 Ref.: 6132 / Fig. 2 Colour: grey. For other colours check availability. Shaft. Not suitable for magazine packaging 13.30 3.8 10 1 6 0.8 6.3 2.90 2.6 3.3 2 1.50 5 2.2 5 TESTS TYPICAL VARIATIONS 1.000 h. @ 50°C: 0.1 W 1000 @ 10 CPM ...15 CPM –25°C; +70°C 16 h. @ 85°C; 2h. @ –25°C 500 h. @ 40°C @ 95% HR 2 h. @ 10 Hz. ... 55 Hz. ±5 % ±4 % (Rn < 1 M ) ±300 ppm (Rn < 100 K) ±2.5 % ±5 % ±2 % 100 % W(%) ELECTRICAL LIFE MECHANICAL LIFE (CYCLES) TEMPERATURE COEFFICIENT THERMAL CYCLING DAMP HEAT VIBRATION (for each plane X,Y,Z) POWER RATING CURVE 40 % NOTE: Out of range values may not comply with these results. 50° 70° °C RECOMMENDED CONNECTIONS VCC E Piher potentiometer’s recommended connection circuit for a position sensor or control application. (voltage divider circuit electronic design). S R A AD RL C Noise filter. Ground. RL 100 x R Disclaimer The product information in this catalogue is for reference purposes. Please consult for the most up to date and accurate design information. Contact Piher Sensors & Controls S.A., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Piher”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product described herein. Piher Sensors & Controls SA Piher disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Piher’s terms and conditions of sale, including but not limited to the warranty expressed therein, which apply to these products. Polígono Industrial Municipal Vial T2, 22, 31500 Tudela - Spain. t. +34-948-820450 f. +34-948-824050 No licence, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Piher. sales@piher.net The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Piher products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Piher for any damages arising or resulting from such use or sale. Please contact authorised Piher personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. 00 20 / 5 3 /E C ) / R o H S3 EU ) cc 5 / 86 3 / Pb (2 01 i ng to ELV or d ( Information contained in and/or attached to this catalogue may be subject to export control regulations of the European Community, USA, or other countries. Each recipient of this document is responsible to ensure that usage and/or transfer of any information contained in this document complies with all relevant export control regulations. If you are in any doubt about the export control restrictions that apply to this information, please contact the sender immediately. For any Piher International Corp. Exports, Note: All products / technologies are EAR99 Classified commodities. Exports from the United States are in accordance with the Export Administration Regulations. Diversion contrary to US law is prohibited. Piher is an AmphenolTM company. A Note: Piher products can be adapted to meet customer’s requirements. Due to continuous process improvement, specifications are subject to change without notice. v160518 39 www.piher.net