PTB8-2PSW

® Amphenol Miniature Cylindrical Connectors 12-070-15 Meets MIL-C-26482, Series 1 Specifications Amphenol Corporation Amphenol Industrial Operations Amphenol Aerospace 40-60 Delaware Avenue, Sidney, New York 13838-1395 Phone: 800-678-0141 or 607-563-5011 Fax: 607-563-5157 www.amphenol-industrial.com Amphenol Page No. Amphenol® Introduction, Miniature Cylindrical General Information, Design Flexibility . . . . . . . . . . . . . Connector Selection Guide . . . . . . . . . . . . . . . . . . . Insert availability . . . . . . . . . . . . . . . . . . . . . . . . . . . Insert availability Breakaway Twist Pull. . . . . . . . . . . . . . . . Alternate positioning . . . . . . . . . . . . . . . . . . . . . . . . . Insert arrangement patterns . . . . . . . . . . . . . . . . . . . . . PT, SP, MS/PT Proprietary/MIL-C-26482, Series 1 Bayonet Coupling, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1, 2 . .3 4, 5 . .6 . .7 8-11 Solder Contacts General Information, Specifications, Service Class . . . . . . . . . . . 12, 13 PT00 (MS3110), SP00 wall mounting receptacle . . . . . . . . . . . . . . 14 PT01 (MS3111) cable connecting receptacle . . . . . . . . . . . . . . . . 15 PT02 (MS3112) SP02 box mounting receptacle . . . . . . . . . . . . . . 16 PT06 (MS3116) SP06 straight plug . . . . . . . . . . . . . . . . . . . . . 17 PT07 (MS3114) SP07 jam nut receptacle . . . . . . . . . . . . . . . . . . 18 PT08E, SP08E 90 degree plug . . . . . . . . . . . . . . . . . . . . . . . 19 PT Connectors with Printed Circuit Board Contacts box mount receptacle, jam nut receptacle. . . . . . . . . . . . . . . . . . 20 PTB, SPB thru bulkhead receptacle . . . . . . . . . . . . . . . . . . . . . 21 General Information, Specifications - PT hermetic . . . . . . . . . . . . . 22 PTIH (MS3113H) hermetic solder mounting receptacle . . . . . . . . . . . 23 PT02H hermetic box mounting receptacle . . . . . . . . . . . . . . . . . 24 PT07H (MS3114H) hermetic jam nut receptacle . . . . . . . . . . . . . . 25 PT Breakaway twist pull plug . . . . . . . . . . . . . . . . . . . . . . . . 26 PT, SP, MS/PT how to order . . . . . . . . . . . . . . . . . . . . . . . . 27 PT-SE, SP-SE, MS/PT-SE Proprietary/MIL-C-26482, Series 1 Bayonet Coupling, Crimp Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 29 . . 30 . . 31 . . 32 . . 33 . . 34 . . 35 . . 36 . . 37 . . 38 . . 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40, 41 . . 42 . . 43 . . 44 . . 45 . . 46 . . 47 . . 48 . . 49 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50, 51 . . 52 . . 53 . . 54 . . 55 . . 56 . . 57 . . 58 . . 59 . . 60 . . 61 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 . . 63 64-68 . . 69 . . 70 71-76 . . 77 78, 79 . . 80 If more information is needed concerning the connectors covered in this publication, or if there are special application needs, please contact: Amphenol Corporation Amphenol Aerospace Amphenol Industrial Operations 40-60 Delaware Avenue Sidney, New York 13838-1395 Telephone: 607-563-5011 Fax: 607-563-5351 Please go to the Amphenol websites to view, download and save this catalog and most all of Amphenol interconnection product literature. www.amphenol-industrial.com www.amphenol-aerospace.com Some miniature connector styles are available in RoHS Compliant versions. Please contact Amphenol Industrial Operations for more information. pheno l Am HS Ro U E General Information, Specifications, Service Class . . . . PT00SE (MS3120), SP00SE wall mounting receptacle . . MF00SE (MS3128) wall mounting receptacle . . . . . . . PT01SE (MS3121) SP01SE cable connecting receptacle PT02SE (MS3122) SP02SE box mounting receptacle . . MF02SE (MS3127) box mounting receptacle . . . . . . . PT06SE (MS3126), SP06SE straight plug . . . . . . . . PT07SE (MS3124) SP07SE jam nut receptacle . . . . . PT08SE, SP08SE 90 degree plug . . . . . . . . . . . . PT-SE Breakway twist pull plug . . . . . . . . . . . . . . PT-SE, SP-SE, MS/PT-SE how to order . . . . . . . . . PT-CE, SP-CE Bayonet Coupling, Crimp Contacts General Information, Specifications, Service Class . . . . PT00CE, SP00CE wall mounting receptacle . . . . . . . PT01CE, cable connecting receptacle . . . . . . . . . . PT02CE, SP02CE box mounting receptacle . . . . . . . PT06CE, SP06CE straight plug . . . . . . . . . . . . . . PT07CE, SP07CE jam nut receptacle. . . . . . . . . . . PT08CE, SP08CE 90 degree plug . . . . . . . . . . . . PT-CE Breakawat twist pull plug . . . . . . . . . . . . . PT-CE, SP-CE how to order. . . . . . . . . . . . . . . . PC Threaded Coupling, Solder Contacts General Information, Specifications, Service Class . . . . PC00 wall mounting receptacle . . . . . . . . . . . . . . PC01 cable connecting receptacle . . . . . . . . . . . . PC02 box mounting receptacle . . . . . . . . . . . . . . PC06 straight plug . . . . . . . . . . . . . . . . . . . . . PC07 jam nut receptacle . . . . . . . . . . . . . . . . . General Information, Specifications - PC hermetic . . . . PCIH hermetic solder mounting receptacle . . . . . . . . PC02H hermetic box mounting receptacle . . . . . . . . PC07H hermetic jam nut receptacle. . . . . . . . . . . . PC how to order . . . . . . . . . . . . . . . . . . . . . . PC-SE, PC-CE Threaded Coupling, Crimp Contacts General Information, Specifications, Service Class . . . . PC-SE, PC-CE how to order . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . Application tools . . . . . . . . . . . . . . . . . . . . . . . . Contacts, Power and Thermocouple Crimp. . . . . . . . . . . Contacts, Shielded Coax . . . . . . . . . . . . . . . . . . . . Mounting Recommendations . . . . . . . . . . . . . . . . . . Other Amphenol Miniature Cylindrical Connectors . . . . . . . Amphenol Sales Office and Authorized Distributor Listing . . . Proprietary/MIL-C-26482 Series 1 connectors covered in this catalog are widely used in general duty and environmental applications, both industrial and military. Markets that use this family of connectors include: • Instrumentation • Monitoring Equipment • Machine Tool, Factory Automation • Communications • Geophysical • Industrial Controls and Robotics • Oil and Petrochemical Industries • Rail/Mass Transit • Military/Aerospace C Table of Contents E /2 002 / 95 / Amphenol operates Quality Systems that are certified to ISO9001: 2000 by third party registrars. NOTE: The connector products in this brochure were formerly known as Bendix® products. These products are now manufactured and sold under the Amphenol® brand name. The name “Amphenol” will replace the name “Bendix” on products and literature in the future. NOTE: The Miniature MIL-C-26482, Series 2 connectors PTSDR and MS/PTS-DR (formerly in this catalog) are no longer supplied with these designations. Amphenol now supplies the Amphenol®/Matrix® MIL-C-26482, Series 2. (Military numbers include MS3470 - MS3472, MS3474, - MS3476). Please refer to page 78 for a brief description of the Amphenol®/Matrix® MIL-C-26482, Series 2 bayonet coupling connectors with crimp, rear insertable and rear releasable contacts, and ask for catalog 12-071 for detailed information on this series. Amphenol ® Miniature Cylindrical Connectors Proprietary/MIL-C-26482, Series 1 Amphenol® Miniature Cylindrical connectors offer twice the number of contacts in just half the size of a Standard connector. These miniature connectors, are available in several series, each with varying design characteristics and customer options to meet cost considerations and provide maximum design flexibility. There are two styles within the family that are MS approved and qualified to MILC-26482, Series 1, and in addition there are several proprietary styles. Common features of all styles: • All are for general duty applications and environmental sealing is achieved with the grommet and clamp design. • Operating temperature is from –55°C to +125°; Operating voltage to 1000 VAC (RMS) at sea level. • Pin and socket contacts are machined from low loss copper alloy and gold plated to eliminate contact corrosion and provide an indefinite shelf life. • All have resilient inserts which provide high dielectric strength and moisture barrier. • A variety of shell finishes (including non-cadmium) and a variety of backend accessories are available within the styles. Bayonet Coupling with Solder Contact Termination PT Solder jam nut receptacle and mated straight plug PT, MS/PT (solder) • MS and proprietary versions • Factory installed solder contacts • 3 point bayonet coupling and 5 key/keyway mating. • Intermateable with all miniature series connectors except threaded PC series. • MS/PT meets MIL-C-26482 Series 1, service classes E, F and P. • MS/PT is UL recognized. SP (solder) • SP Series is a modification of the PT with same features except a wider flange for back panel mounting Options • 7 shell styles with 60 insert patterns • Hermetic seal (glass fusion) receptacle styles available • Pressurized thru bulkhead receptacle style available • Breakaway quick disconnect styles • EMI filter protection styles • Pre-installed coax solder contacts are available • Printed circuit board contacts are available Bayonet Coupling with Crimp Contact Termination PT Solder wall mount receptacle PT-SE Crimp wall mount receptacle and mated straight plug PT-SE, MS/PT-SE (crimp) Options • MS and proprietary versions • 6 shell styles with 47 insert patterns • Crimp rear insertable/front release contact termination. (closed entry • Breakaway quick disconnect style socket insert prevents probe damage). available • 3 point bayonet coupling and 5 key/keyway mating. • Coax and thermocouple contacts are • Intermateable with all miniature series connectors except threaded available PC series. • MS/PT-SE meets MIL-C-26482 Series 1, service classes E, F, P. SP-SE (crimp) • Modification of the PT-SE with wider flange for back panel mounting PT-CE, SP-CE (crimp) • Incorporates a special one-piece insert and grommet assembly Threaded Coupling with Solder Contact Termination PC (solder) Proprietary • Double stub threaded coupling and single hole polarization. • Factory installed solder contacts Options • 5 shell styles with 60 insert patterns • Hermetic receptacles available • Pressurized thru bulkhead receptacle style available • Pre-installed coax solder contacts are available. Threaded Coupling with Crimp Contact Termination PC Threaded Crimp straight plug and wall mount receptacle Two threaded PC styles are offered in some shell sizes. Both have crimp front release and front removable contacts, but they have different retention systems. PC-SE (crimp) Proprietary - with spring tower retention system • Spring tower retention system PC-CE (crimp) Proprietary - with nylon wafer dielectric system 1 Options • 5 shell styles (consult Amphenol for availability of shell sizes and insert patterns) Amphenol ® Miniature Cylindrical design flexibility The large family of miniature proprietary and MS style connectors provides for many optional features and designs. In addition to the choices of bayonet or threaded shells, solder or crimp termination within the style variations, there are additional options that are shown here. Hermetics Hermetically sealed receptacles have fused compression glass sealed inserts which provide envionrmental moisture sealing. There are three hermetic styles within the PT bayonet series and three hermetic styles within the PC threaded series. Coaxial Contacts Amphenol Miniature connectors can incorporate shielded coax contacts. Size 8 and 12 crimp coax contacts are available in PT-SE, SP-SE, MS/PT-SE. Factory installed size 8 and 12 solder type coax contacts are available in PT, SP,MS/PT connectors. See coax contact information pages at the end of this catalog. 26482 Connector with Hermetic Seal Insert and Coax Contacts 26482 Connector with PC Tail Contacts Printed Circuit Board Tail Contacts PT bayonet connectors in box mounting receptacle and jam nut receptacle styles are available with printed circuit board contacts. Standard PCB tails for MIL-C-26482 connectors have gold plating, .0050 inches over nickel. See page 20 and call Amphenol for further information. Flex Circuitry Flex termination assemblies for attaching cylindrical connectors to printed circuit boards are available through the Amphenol division ACT, Advanced Circuit Technology. Flex can be used with miniature 26482 connectors and it can be designed to meet specific length, current 26482 Connector with Flex carrying capacity and to fit the precise geometric shape of the connector to board package. Flex circuity plugs into a printed circuit board and creates a self-locking terminal pad which eliminates the need for an additional interconnect to the PCB. Breakaway, Twist Pull Miniatures Quick disconnect “breakaway” styles are shown in this catalogs. These are available in PT solder style plugs (page 26), PT-SE crimp style plugs (page 38) or PT-CE crimp style plugs (page 48). Quick disconnect of the connector plug from the receptacle is accomplished with axial pull on the lanyard. This instant decoupling and damage free separation is ideal for weapons release and blind or difficult accessibility situations. Separation forces vary per connector series. The plug and receptacle need to be fully mated before disengagement by the lanyard pull. Breakaway Twist Pull 26482 Filter Protection Amphenol offers the FPT Series which combines the miniature PT series with an EMI filter. Designed to provide EMI protection for sensitive circuits, each circuit is individually filtered within the connector, eliminating the need for costly and bulky exterior network filters. Filter contacts are available in MF, HF, VHF, and UHF ranges and are intermateable and intermountable with MIL-C26482 connectors. For further information see catalog 12-120, Amphenol EMI Filter Transient Protection Connectors. (online at 26482 Connector with EMI www.amphenol-aerospace.com). Filter Protection Overmolded Cable Overmold seals and cables can be designed for almost any industrial application. A variety of materials are available: neoprene, hypalon and others; and a variety of lengths can be designed to meet customer specifications. Overmold seals to the rear of the connector and to the cable jacket providing moisture sealing. 2 26482 Connector with Overmolded Cable Amphenol ® Miniature Cylindrical connector selection guide The accompanying chart is provided to assist the user in selecting the appropriate type of miniature connector to meet the application requirements. Further information can be found in specific sections of this catalog. Solder CHARACTERISTICS Intermateable† Contacts Solder Crimp PT MS/PT SP PC MS/ PT-SE o o o X o o o X o o X • • • • • • • • • • • • • • • • • • • • • • • • • Crimp RI/FR Contact Retention System Non-Removable Coupling Bayonet • • • • • • • • Olive Drab Cadmium (003) • Bright Cadmium (001) Resilient Dielectric (–55°C to +125°C) • • • • • • *• • *• • *• • • • • • *• • • • Wide Mounting Flange Hermetic Seal • • Anodic Coated (005) Temperature Range • Removable Threaded Standard Finishes†† PT-SE SP-SE PC-SE PT-CE SP-CE PC-CE • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • **• • **• • • • • • • • SHELL STYLE AVAILABILITY Wall Mounting Receptacle “00” Cable Connecting Receptacle “01” *** Box Mounting Receptacle “02” Straight Plug “06” Jam Nut Receptacle “07” Thru-bulkhead Receptacle “TB” Solder Mount Receptacle “I” 90° Plug “08” • • • • • *• • • • *• • *• *• • RI/FR = Rear Insertion/Front Releasable † o intermates with o X intermates with X †† Optional finishes available. See “how to order” sections. * Available in hermetic version ** Dual mounting holes *** This connector style is sometimes referred to as a cable connecting “plug.” It does, however, mate with either a straight or 90 degree plug. Amphenol®/Matrix® MIL-C-26482, Series 2 bayonet coupling connectors with rear insertable and rear releaseable contacts are covered in another catalog - See pageXX for a brief description and see complete details in catalog 12-071 which is online at www.amphenol-aerospace.com. 3 • • • Amphenol ® Miniature Cylindrical insert availability Solder Termination Insert Arrangement MS/PT 6-1 Crimp Termination PT SP PC Hermetic PT MS-PT PC MS/PT-SE PT-SE SP-SE PC-SE Contact Size Coax PT-CE SP-CE PC-CE Total Contacts 20 16 12 12 8 Service Rating X X X X* 1 1 I 8-2 X X X X X X 2 2 I 8-3 X X X X X X 3 3 I 8-4 X X X X X X 4 4 I 8-33 X X X X 3 3 I 8-98 3 X X X X 3 10-2 X X X 2 10-5 X X X X* X X X X 10-6 X 10-70 X X X 10-98 X X X X X* 12-3 X X X X X X X X X* 12-8 X X X X 12-10 X 12-4 X X I 2 I 5 5 I 6 6 I 1 1 6 Coax X 6 X X 3 I X* X X 8 8 I X X X 3 4 II 4 I X X X 10 10 I 12-14 X X X 14 14 I 12-98 X X X 10 10 I 14-2 X X X 14-4 S S S X X X X X X X X 5 X X X 8 6 14-12 X X X X X X X 12 8 4 I 14-15 X X X X X X X 15 14 1 I 14-18 X X X X X* X X 18 18 14-19 X X X X X X X 19 19 5 1 14-5 14-8 2 14-22 X* 14-71 P X X 14-91 HV S X X 14-AA 2 4 (02CE) X* X X X X X X X X X 16-23 X X X X X X 23 22 16-26 X X X X X X X 26 26 X X X 15 14 X* 14 8 X X X X 23 21 X X X X* 5 16-76††† 16-99 X 18-5 2 I I 4 18-8 X X X X X X 11 18-30 X X X X X* X X 30 *Not available in MS version **Flashover voltage 5,000 VAC (RMS) ***1500 VAC (RMS) Sdesignates Socket insert only. 1 4 II 1 I I 1 1 N/A 5 *** 2 I 5 8 29 II I 11 II 1 I P designates Pin insert only. †Size 12 contacts for #10 wire ††Not presently tooled †††Contacts must be ordered separately 4 I I 8 8 X I ** 4 8 18-11 I 3 X 16-70 II 3 16-8 X I 5 4 3 II 4 INSERT AVAILABILITY Amphenol ® Miniature Cylindrical insert availability, cont. Solder Termination Insert Arrangement MS/PT 18-32 X Crimp Termination PT SP PC Hermetic PT MS-PT PC X X X X 18-71 Contact Size MS/PT-SE PT-SE SP-SE PC-SE PT-CE SP-CE PC-CE Total Contacts X X 32 Coax X* 20 X X X 14 18-75 X X X 4 X X X 18-76 X 18-91 HV 6 6 X 6 X 16 X 24 24 X 25 25 X 26 20 X 27 27 X X X 20-24 X X X X 20-25 X X 20-26 X X X X X X X 20-39 X X X X X X X 39 37 20-41 X X X X X X X 41 41 14 10 7 7 20-70 20-90 HV X X X 22-7 X X X X X X X X* X 22-25 22-32 X X X X X X 22-34 X X 22-36 X X X 4 Coax N/A 1 II 2 Coax, I ** II I I 6 I I 2 I I 4 Coax Hi-Voltage 7 X* Coax, II 16 20-27 Service Rating 1 4 3 8 X X 8 I 10 X* 20-16 12 8 4 18-80 22-21 12 32 9 18-72 16 7 21 21 25 25 Coax II I P 32 32 I X X 34 34 I X X 36 36 I 22-41 X X X X X X X 41 27 22-55 X X X X X X X 55 55 X X X 19 13 6 I, Coax 9 2 7 I, Coax 19 12 22-70 22-71 22-72 X X X 22-78††† X* 22-96 X X X 24-61 24-71 X X X X X X X X 4 X 24-79 *Not available in MS version **Flashover voltage 5,000 VAC (RMS) ***1500 VAC (RMS) 3 N/A 7 Coax 7† 31 X* X I 7 X 24-51 I 7 X* 24-31 14 II 31 51 47 61 61 49 45 6 1 I 4 I I 2 2 N/A 5 Coax †Size 12 contacts for #10 wire ††Not presently tooled †††Contacts must be ordered separately 5 Amphenol ® Miniature Breakaway Twist Pull insert availability Insert Availability - Breakway Twist Pull Crimp Termination Insert Arrangement 8-2 8-3 8-4 10-2 10-6 10-98 10-99 12-3 12-4 12-8 12-10 12-98 14-2 14-5 14-8 14-12 14-15 14-16 14-18 14-19 14-91 16-6 16-8 16-23 16-26 16-99 18-5 18-11 18-28 18-30 18-32 18-91 20-8 20-16 20-24 20-25 20-27 20-39 20-41 22-8 22-21 22-25 22-32 22-34 22-36 22-41 22-55 22-96 22-97 22-99 24-31 24-61 PT-CE PT-SE X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Solder Termination PT X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X * 5KV Voltage Rating † Size 12 contact for #10 wire. X X Total Contacts 2 3 4 2 6 6 7 3 4 8 10 10 2 5 8 12 15 4 18 19 3 6 8 23 26 23 5 11 28 30 32 6 8 16 24 25 27 39 41 8 21 25 32 34 36 41 55 7 16 11 31 61 20 Contact Size Service 16 12 Rating 2 3 4 2 6 6 7 3 4 8 10 10 2 5 6 8 14 2 4 1 2 2 18 19 3* 6 22 26 21 8 1 2 5 26 29 32 6* 11 2 1 8 16 24 25 27 37 41 2 8 21 25 32 34 36 27 55 14 7† 16 11 31 61 6 I I I I I I I II I I I I II II I I I II I I H.V. I II I I I II II I I I H.V. I II I I I I I II II I I I I I I II II II I I For further information regarding any additional insert patterns available in Breakaway Miniature connectors, please contact Amphenol Aerospace. For availability of shielded coax contacts within Breakaway Miniature connectors contact Amphenol.The Breakaway style pages are: PT (solder) breakaway plug is on page 26, the PT-SE (crimp) breakaway plug is on page 38, and the PT-CE (crimp) breakaway plug is on page 48. Amphenol ® Miniature Cylindrical alternate positioning A B A B Position W Position X 6 8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 12 14 14 14 14 14 14 14 14 14 14 14 14 16 16 16 16 16 16 18 18 Insert Arrangement 6-1 8-2* 8-3 8-4* 8-33* 8-98 10-2 10-5* 10-6* 10-70 10-98* 12-3* 12-4* 12-8 12-10* 12-14 12-98* 14-2 14-4* 14-5* 14-8 14-12* 14-15* 14-18* 14-19* 14-22 14-71 14-91HV 14-AA* 16-8* 16-23 16-26* 16-70 16-76 16-99* 18-5 18-8 Position Y Position Z Views looking into front face of pin insert or rear of socket insert. Insert Rotation Shell Size A B A To avoid cross-plugging problems in applications requiring the use of more than one miniature cylindrical connector of the same size and arrangement, alternate insert rotations are available as indicated in the accompanying chart. As shown in the diagram at right, the front face of the pin insert is rotated within the shell in a clockwise direction from the normal shell key. The socket insert would be rotated counterclockwise the same number of degrees in respect to the normal shell key. B Alternate Positioning Insert Rotation Degrees W X Y Z – 58 60 45 90 – 45 45 90 – 90 – 38 90 60 – 61 58 45 40 48 43 17 15 30 45 – – 45 54 158 60 41 – 66 55 180 – 122 210 97 – – 90 151 – – 180 – – 112 155 – 135 122 – 92 162 90 110 90 165 – – 60 – 152 270 – 122 – 156 97 – – – – 184 – – 315 180 – – 240 180 – 203 270 – 189 – – 184 189 – 155 180 315 – – – – 180 – 275 216 – 223 263 – – – – – – – – 270 – – 270 – – 292 295 – 340 – – 273 312 – 234 270 – – – – – 331 – 338 286 – 340 315 – Shell Size 18 18 18 18 18 18 18 18 18 20 20 20 20 20 20 20 20 20 22 22 22 22 22 22 22 22 22 22 22 22 22 24 24 24 24 24 Insert Arrangement 18-11* 18-30* 18-32* 18-71 18-72 18-75 18-76 18-80 18-91HV 20-16* 20-24 20-25 20-26 20-27 20-39* 20-41* 20-70 20-90 22-7 22-21* 22-25 22-32 22-34 22-36 22-41 22-55* 22-70 22-71 22-72 22-78 22-96* 24-31 24-51 24-61* 24-71 24-79 Degrees W X Y Z 62 180 85 18 53 45 – 45 90 238 70 72 13 72 63 45 63 45 19 16 60 72 62 72 39 30 30 33 42 19 19 90 22 90 39 – 119 193 138 108 102 – – 90 180 318 145 144 107 144 144 126 135 135 41 135 125 145 142 144 135 142 82 191 200 41 41 225 171 180 131 – 241 285 222 127 213 – – 135 240 333 215 216 210 216 252 225 222 225 – 175 211 215 218 216 264 226 218 236 277 – – 255 313 270 205 – 340 350 265 215 293 – – 160 270 347 290 288 322 288 333 – 335 315 – 349 336 288 298 288 – 314 312 270 339 – – – – 324 281 – * Available in Hermetic Class 7 Amphenol ® Miniature Cylindrical insert arrangements front face of pin inserts illustrated D C A B Insert Arrangement A B A C A C C B A A B B B 6-1 8-2 8-3 8-4 8-33 8-98 Service Rating I I I I I I I Number of Contacts 1 2 3 4 3 3 2 Contact Size 20 20 20 20 20 20 16 E D C D Insert Arrangement A A E B E B C A F A F D 10-2 B C G A F A D B H B E C C C B D 10-5 10-6 10-70 10-98 12-3 12-4 Service Rating I I Coax I II I 12-8 I Number of Contacts 5 6 1 6 3 4 8 Contact Size 20 20 8 Coax 20 16 16 20 A B H A B G K J C E D J F C F H L M A E D A A H G B C K K R N J F D A C B E B F D G D D C C E P H B E Insert Arrangement 12-10 12-14 12-98 14-2 14-4 14-5 I I I II I II Number of Contacts 10 14 10 2 4 5 6 2 Contact Size 20 20 20 12 12 16 20 12 Service Rating H L A A J G M J M K E Insert Arrangement C L D K N C R H F L A M N B K B D P E G F J U T H P S G R F A M L B E C D N K J A B P V U C R T I A D A B B E C D S 14-8 D C E H G F B C 14-12 14-15 14-18 14-19 14-22 14-71 14-91HV I I I I I I Flashover 5,000 VAC (RMS) Service Rating Number of Contacts 8 4 14 1 18 19 1 4 3 1 3 Contact Size 20 16 20 16 20 20 20 12 16 8 Coax 20 8 For contact legend see page 61. Amphenol ® Miniature Cylindrical insert arrangements front face of pin inserts illustrated A G D M B L H F B P N A A S X C U W Insert Arrangement E J D V H Y W X K F G V E L E J H B N J F E G 16-8 16-23 16-26 I II I I Number of Contacts 4 8 22 1 26 14 Contact Size 12 16 20 16 20 20 16-70 N/A 1 12 Coax A N J L N C P B S Y T E Service Rating B E D C F C L G J G H E D D E 16-76 16-99 18-5 18-8 I II I II 8 1 Contact Size 20 12* C F Flashover 1.500 VAC (RMS) Number of Contacts B K H F K F Insert Arrangement V W L E H D X D M G A B C U Z G A M H J A R P B K D L 14-AA A C R M F Service Rating K H G D c Z D K C A P C U b M T B T N a C Z A R S P B R Y 18-11 5 21 2 5 8 11 2 Coax* 20 16 12 12 16 *Contact Positions Optional S R P A d B U e b N K Insert Arrangement E f g Z L W X Y P D V a M F G A A C c a K H J P X F G F E 18-32 18-71 I II, Coax 1 32 8 1 Contact Size 20 16 20 16 8 Coax A 10 A B A F G C C C E B B F D D E Insert Arrangement 18-75 18-76 18-80 Service Rating Coax II I, Coax Contact Size 4 20 12 Coax A H B E N/A 29 D D 18-72 Number of Contacts Number of Contacts C N G D I D M H F 18-30 Service Rating B C Y Z A L J G E h b L D g M J W j B K V f N H B U e d H J T S R C T c 4 8 Coax 3 1 12 Coax 8 Coax 9 C 18-91 HV Flashover 5,000 VAC (RMS) 6 2 6 20 8 Coax 20 Amphenol ® Miniature Cylindrical insert arrangements front face of pin inserts illustrated L A K L B M K N S W C J a V Y Z U b R P N U a F M a W c b Z X C D E F J 20-16 20-24 20-25 Service Rating II I I Number of Contacts 16 24 25 20 6 Contact Size 16 20 20 20 12 A R a U C S N b Z M T D T d c Y S E U k J Insert Arrangement m U T q b n p c f G d e M L H f e N J K d M H C G J 20-39 20-41 I I I D N E F K L 20-27 Service Rating G H c P H F b p q R M P a n g F G B E Z t r A L J D m s h S N K C Y k D a B X j i E g V W Z r h V C 20-26 I A W B Y i P F K A X j R L X W V B P G H Y K H J B L G K F A V T E Z V E F S D T D S G E C Y L R T G Insert Arrangement P S W M U B X C H D H P N B J P R N X A R A M 20-70 Coax Number of Contacts 27 37 2 41 10 4 Contact Size 20 20 16 20 20 8 Coax A M B L G V K E U J a b D V K T D U W D C D S C T X L C B S Z C X B E F Y M R W A R N B P A G P A N F E E J F F H Insert Arrangement G H G 20-90 22-7 22-21 Hi-Voltage Coax II I Number of Contacts 7 7 21 25 Contact Size 20 8 Coax 16 16 Service Rating N A P b M a B L C j g Z d P T K D J e f Y k E b g j M H F G N d F G Z L K J H h k c L b K Y G H J E T j D b n s q d g e H J P N M L 22-34 22-36 I I I Number of Contacts 32 34 36 27 14 Contact Size 20 20 20 20 16 10 G f R 22-32 Service Rating F p h S F E c t r X Z a U C a m i D B Z k V W j l M Y a g m W C n X h E V e X B V W f l P D A Y A U f V U X W Insert Arrangement N R C e c T S B U d R S c h A T S R 22-25 22-41 I K Amphenol ® Miniature Cylindrical insert arrangements front face of pin inserts illustrated k j N i p X q BB HH y FF DD w v f e N C B S J G C V T K L D P R U T P N M F b J S E R H D F G G E F H H E C G J K D 22-55 22-70 22-71 I I, Coax I, Coax Service Rating K B V a d Insert Arrangement A J c g L U L E u h M D t x H B F Z s EE M Y r CC GG A A C W AA z P B V n m R A U T S 22-72 N/A Number of Contacts 55 13 6 2 7 12 4 3 Contact Size 20 20 8 Coax 20 8 Coax 20 16 8 Coax M A A F N F B G G a b J C g R e c W d E C V r U q T H U D DD 22-78 22-96 24-31 Coax II I 7 7 31 47 8 Coax 12 for 16 20 A Z X I s FF r MM EE U p S n P F m k N M G h H i j J F C c u D d D AA BB e p g z BB B b z y r q V y AA CC R Service Rating KK DD W E f LL q T Insert Arrangement PP e x JJ NN D t s X d w HH A Y C v u GG W V c t a Z B b a f A E F U g G n T m x S k j R K P L v w N M 24-61 24-71 I N/A h i L E C B H J K 24-79 Coax Number of Contacts 61 45 2 2 1 5 Contact Size 20 20 16 8 Coax 20 8 Coax Contact Legend Symbol Contact Size 20 16 12 HV 12 Coax 8 Coax 11 K L M N H J j k 24-51 # 10 wire Y h i n P G g w m F f x Service Rating Contact Size BB z CC Insert Arrangement Number of Contacts E e v R D D d AA y S F C c p T E G s D S V t W C B b u X Q f X E Y P Y K A Z B Z B a A L 4 12 Coax Amphenol ® PT, SP, MS/PT Proprietary/MIL-C-26482, Series 1 bayonet coupling and solder termination Amphenol® solder contact miniature cylindrical connectors meet the most critical application needs. Design versatility combined with high reliability performance makes these series of Miniature Cylindrical Connectors ideal for environmental sealing or pressurized applications. wall mounting receptacle cable connecting receptacle* box mounting receptacle straight plug jam nut receptacle The MS/PT Series is qualified to MIL-C-26482, Series 1 and has all the outstanding design characteristics and quality of the PT Series. The SP Series is a modification of the PT, providing special shells with a wide mounting flange for back panel mounting. A corrosion resistant electrically conductive finish of cadmium plate with an olive drab chromate after-treatment is used on the PT and MS/PT. The SP is given a durable non-conductive hard anodic “Alumilite”® coating which provides abrasion protection and resistance to corrosion. Shell components for these series are aluminum. The dependable 5 key/keyway polarization with bayonet lock coupling assures positive mating with no chance of cross plugging. Spring tension provided by a wave washer in the coupling nut ensures maintenance of interfacial seal between mating halves. Both the insert and main joint gasket are molded from resilient neoprene. This provides excellent moisture sealing at the gasket and superior electrical isolation of the contact in the insert. Both pins and sockets are machined from a copper alloy and are gold plated. This gold plating eliminates contact corrosion and offers an indefinite shelf life. Socket contacts for these series are a closed entry design. A breakaway style plug is available in the PT solder series. Hermetics receptacles are available in PT and MS/ PT solder series. Receptacles with printed circuit board contacts are also available. PT Solder is UL recognized under file #E115497, Vol. 1, Sec. 5. The PT, SP and MS/PT Series are intermateable and intermountable with all existing Miniature Cylindrical Series connectors except for the threaded coupling PC Series. Refer to pages 4-11 for insert arrangement availability. PT, SP, MS/PT CONTACT DATA/CONNECTOR RATINGS Contact Specifications Contact Size thru bulkhead receptacle Test Current Maximum Millivolt Drop† Solder Well Diameter 20 7.5 55 .046 16 13.0 50 .078 12 23.0 42 breakaway twist pull plug +.004 –.000 +.005 –.003 +.004 .116 –.002 Solder Well Depth .125 +.031 –.000 +.031 –.000 +.031 .188 –.000 .188 Service Rating Service Rating 12 Recommended Operating AC Voltage at Sea Level Test Voltage AC (RMS), 60 cps Sea Level 50,000 ft. 70,000 ft. 110,000 ft. I 600 1,500 500 375 200 II 1,000 2,300 750 500 200 † Silver plated wire per MIL-C-26482 * This connector style is sometimes referred to as a cable connecting “plug.” It does, however, mate with a straight or 90 degree plug. PT, SP Service Classes “A” (SR) General duty, with strain relief clamp for cable or wire bundle support “C” Pressurized receptacle; less than 1 cu. in. per hour leakage at 30 psi over a temperature range of –65°F to +257°F “E” Environmental resistant connectors - supplied with a multi-holed grommet and clamping nut for moisture-proofing individual open wires “E” (SR), MS / “F” strain relief “E” (SR) Environmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support “J” Same as “W” class except with strain relief “P” Translucent nylon boot for retaining customer-applied potting compounds; held in place by a threaded ring “P” (SR) Strain relief clamp suitable for retaining customer applied potting compounds, with provision for wire support “W” Compressing clamp and neoprene gland for moisture proofing multi-conductor jacketed cables. Telescoping sleeves (MS 3420A) can be used to adapt to cables smaller than minimum close-down. “H”* Hermetically sealed with compression glass inserts (see pages 22-25) “E”, MS / “E” open wire seal “P”, MS / “P” potting boot Style with printed circuit board contacts- see page 20. Breakaway style - see page 26. MS/PT Service Classes The MS/PT Miniature connector is available in the following certified service classes: “E” Environmental resistant connectors - supplied with a multi-holed grommet and clamping nut for moisture-proofing individual open wires “F” Grommet seal with strain relief clamp “P” Translucent nylon boot for retaining customer-applied potting compounds; held in place by a threaded ring “W” cable seal 13 BAYONET COUPLING WITH SOLDER CONTACTS “A” general duty PT, SP, MS/PT PT and SP connectors are available in the service classes listed below. Each class, with the exception of hermetic, offers one or more means of terminating or supporting a cable or wire bundle. Class “W” is not available in the SP Series. “A” General duty; back shell is threaded for conduit attachment of MS3057 cable clamp PT00 (MS3110) SP00 wall mounting receptacle S R L PT .120 ± .005 Dia. (.147 ± .005 Dia., size 24) SP .150 ± .005 Dia. (TP) Q M 4 Holes R S A (TP) “W” Cable Seal K L Z TERMINATION ASSEMBLIES “A” General Duty/ “C” Pressurized“ L “A” (SR), “E” (SR), “P” (SR), MS / “F” Strain Relief “E” Open Wire Seal L V “P” Potting Boot N L L D PT00W-XX-XXX N GDH N D N N D “J” Cable Seal XL C .375 MIN PT00A-XX-XXX SP00A-XX-XXX PT00C-XX-XXX PT00A-XX-XXX (SR) SP00A-XX-XXX (SR) PT00E-XX-XXX (SR) SP00E-XX-XXX (SR) PT00P-XX-XXX (SR) SP00P-XX-XXX (SR) MS3110F-XX-XXX To complete part number see how to order on page 27. ■ (MMC) located within .0025 of (TP) Shell Size 6 8 10 12 14 16 18 20 22 24 Receptacle Front View R S (TP) Max. PT SP PT SP .469 .594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 .641 .734 .812 .938 1.031 1.125 1.203 1.297 1.375 1.500 .688 .812 .938 1.031 1.125 1.219 1.312 1.438 1.562 1.688 .953 1.047 1.125 1.250 1.344 1.438 1.516 1.672 1.750 1.875 A +.001 –.005 K +.020 –.010 PT SP .348 .473 .590 .750 .875 1.000 1.125 1.250 1.375 1.500 .493 .493 .493 .493 .493 .493 .493 .650 .650 .683 6 8 10 12 14 16 18 20 22 24 – 6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 8-32 PT00P-XX-XXX SP00P-XX-XXX MS3110P-XX-XXX N D PT00J-XX-XXX MS3110J-XX-XXX Receptacle Side View M +.010 Q –.000 L Thread Max. Class 2A PT SP .524 .906 .524 .906 .524 .906 .524 .906 .524 .906 .524 .906 .524 .906 .650 1.125 .650 1.125 .683 1.188 Class “A” (SR), “E” (SR), “P” (SR), MS / “F” Shell C Size Thread PT00E-XX-XXX SP00E-XX-XXX MS3110E-XX-XXX .431 .431 .431 .431 .431 .431 .431 .556 .556 .589 .462 .462 .462 .462 .462 .462 .462 .556 .556 .589 Class “E”, MS / “E” .3125-32 NEF .4375-28 UNEF .5625-24 NEF .6875-24 NEF .8125-20 UNEF .9375-20 UNEF 1.0625-18 NEF 1.1875-18 NEF 1.3125-18 NEF 1.4375-18 NEF Class “A”, “C” Z Max. PT SP .468 .468 .468 .468 .468 .468 .531 .531 .531 .498 D Min. L Max. .438 .175 1.553 .462 .438 .297 1.553 .590 .438 .421 1.553 .717 .438 .546 1.553 .834 .438 .663 1.553 .970 .438 .787 1.553 1.088 .438 .879 1.553 1.216 .531 1.014 1.703 1.332 .531 1.134 1.703 1.460 .498 1.259 1.765 1.585 Class “P”, MS / “P” V Thread Class A N Max. .3750-32 NEF .5000-28 UNEF .6250-24 NEF .7500-20 UNEF .8750-20 UNEF 1.0000-20 UNEF 1.1875-18 NEF 1.1875-18 NEF 1.4375-18 NEF 1.4375-18 NEF Class “W”, “J” D D Min. G Max. H Max. L Max. N Max. L Max. N Max. D Min. L Max. N Max. Closed Free L Max. N Max. XL Max. – .240 .302 .428 .552 .615 .740 .740 .928 .990 – .125 .188 .312 .375 .500 .625 .625 .750 .800 – .812 .875 1.000 1.125 1.188 1.438 1.438 1.625 1.719 – 1.922 1.922 1.922 1.922 2.047 2.078 2.344 2.344 2.406 – .550 .675 .803 .920 1.047 1.165 1.290 1.418 1.543 1.266 1.266 1.266 1.266 1.266 1.266 1.266 1.516 1.516 1.578 .440 .560 .685 .813 .930 1.057 1.175 1.301 1.430 1.555 .192 .317 .434 .548 .673 .798 .899 1.024 1.149 1.274 1.438 1.438 1.438 1.438 1.438 1.438 1.438 1.656 1.656 1.717 .484 .608 .734 .858 .984 1.110 1.234 1.360 1.484 1.610 – .168 .205 .338 .416 .550 .600 .635 .670 .740 – .230 .312 .442 .539 .616 .672 .747 .846 .894 – 1.705 1.705 1.848 2.040 2.256 2.486 2.922 3.086 3.310 – .547 .675 .812 .940 1.067 1.194 1.322 1.449 1.576 – 2.271 2.271 2.411 2.599 2.943 3.172 3.610 3.766 3.985 All dimensions for reference only. 14 PT01 (MS3111) cable connecting receptacle L S Q M Y S A “W” Cable Seal L K Z TERMINATION ASSEMBLIES “A” General Duty L “A” (SR), “E” (SR), “P” (SR), MS / “F” Strain Relief “E” Open Wire Seal N L V “P” Potting Boot D L L PT01W-XX-XXX N D GD H N N N D “J” Cable Seal XL C .375 MIN PT01A-XX-XXX PT01A-XX-XXX (SR) PT01E-XX-XXX (SR) PT01P-XX-XXX (SR) MS3111F-XX-XXX PT01E-XX-XXX MS3111E-XX-XXX PT01P-XX-XXX MS3111P-XX-XXX N Note: This connector style is sometimes referred to as a cable connecting “plug”. It does, however, mate with either a straight or 90 degree plug. To complete part number see how to order on page 27. Recept. Front View Shell Size S ±.020 Y ±.020 A +.001 –.005 6 8 10 12 14 16 18 20 22 24 .688 .812 .938 1.031 1.125 1.219 1.312 1.438 1.562 1.688 .812 .938 1.062 1.156 1.250 1.344 1.438 1.562 1.688 1.812 .348 .473 .590 .750 .875 1.000 1.125 1.250 1.375 1.500 K +.020 –.010 .494 .494 .494 .494 .494 .494 .494 .650 .650 .683 Class “A” (SR), “E” (SR), “P” (SR), MS / “F” Shell C Size Thread 6 8 10 12 14 16 18 20 22 24 – 6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 8-32 PT01J-XX-XXX MS3111J-XX-XXX Receptacle Side View M Q L +.016 Thread Max. –.000 Class 2A .906 .906 .906 .906 .906 .906 .906 1.125 1.125 1.188 .400 .400 .400 .400 .400 .400 .400 .535 .535 .568 D Class “A”, .3125-32 NEF .4375-28 UNEF .5625-24 NEF .6875-24 NEF .8125-20 UNEF .9375-20 UNEF 1.0625-18 NEF 1.1875-18 NEF 1.3125-18 NEF 1.4375-18 NEF Class “E”, MS / “E” Z Max. D Min. L Max. N Max. V Thread Class A .948 .948 .948 .948 .948 .948 .948 1.166 1.166 1.166 .175 .297 .421 .546 .663 .787 .879 1.041 1.135 1.259 1.553 1.553 1.553 1.553 1.553 1.553 1.553 1.703 1.703 1.765 .462 .590 .717 .834 .970 1.088 1.216 1.332 1.460 1.585 .3750-32 NEF .5000-28 UNEF .6250-24 NEF .7500-20 UNEF .8750-20 UNEF 1.0000-20 UNEF 1.1875-18 NEF 1.1875-18 NEF 1.4375-18 NEF 1.4375-18 NEF Class “P”, MS / “P” Class “W”, “J” D D Min. G Max. H Max. L Max. N Max. L Max. N Max. D Min. L Max. N Max. Closed Free L Max. N Max. XL Max. – .240 .302 .428 .552 .615 .740 .740 .928 .990 – .125 .188 .312 .375 .500 .625 .625 .750 .800 – .812 .875 1.000 1.125 1.188 1.438 1.438 1.625 1.719 – 1.922 1.922 1.922 1.922 2.047 2.078 2.344 2.344 2.406 – .550 .675 .803 .920 1.047 1.165 1.290 1.418 1.543 1.266 1.266 1.266 1.266 1.266 1.266 1.266 1.516 1.516 1.578 .440 .560 .685 .813 .930 1.057 1.175 1.301 1.430 1.555 .192 .317 .434 .548 .673 .798 .899 1.024 1.149 1.274 1.438 1.438 1.438 1.438 1.438 1.438 1.438 1.656 1.656 1.717 .484 .608 .734 .858 .984 1.110 1.234 1.360 1.484 1.610 – .168 .205 .338 .416 .550 .600 .635 .670 .740 – .230 .312 .442 .539 .616 .672 .747 .846 .894 – 1.705 1.705 1.848 2.040 2.256 2.486 2.922 3.086 3.310 – .547 .675 .812 .940 1.067 1.194 1.322 1.449 1.576 – 2.271 2.271 2.411 2.599 2.943 3.172 3.610 3.766 3.985 All dimensions for reference only. 15 PT02 (MS3112) SP02 box mounting receptacle S R (TP) L PT .120 ± .005 Dia. (.147 ± .005 Dia., size 24) M SP .150 ± .005 Dia. 4 Holes R S (TP) A N K * * * * * * * * Z PT02A-XX-XXX SP02A-XX-XXX PT02C-XX-XXX SP02C-XX-XXX PT02E-XX-XXX SP02E-XX-XXX MS3112E-XX-XXX PT02P-XX-XXX SP02P-XX-XXX MS3112P-XX-XXX PT02W-XX-XXX SP02W-XX-XXX To complete part number see how to order on page 27. ■ (MMC) located within .0025 of (TP) * The PT02 and SP02 box mounting receptacles are made only to complete a series; no provision is made for accessories or potting on the rear skirt. Receptacle Front View R (TP) Receptacle Side View K +.020 –.010 Shell Size PT SP PT SP A +.001 –.005 PT 6 .469 .641 .688 .953 .348 .493 8 .594 .734 .812 1.047 .473 10 .719 .812 .938 1.125 12 .812 .938 1.031 1.250 14 .906 1.031 1.125 16 .969 1.125 18 1.062 20 22 24 M +.010 –.000 Z Max. SP N Dia. Max. PT SP .462 .323 .465 .438 .431 .462 .449 .465 .438 .825 .431 .462 .573 .465 .438 .825 .431 .462 .699 .465 .438 .524 .825 .431 .462 .823 .465 .438 .493 .524 .825 .431 .462 .949 .465 .438 1.125 .493 .524 .825 .431 .462 1.073 .465 .438 1.672 1.250 .650 .650 1.076 .556 .556 1.199 .526 .531 1.750 1.375 .650 .650 1.076 .556 .556 1.323 .526 .531 1.875 1.500 .683 .683 1.109 .589 .589 1.449 .493 .497 S SP L Max. PT .524 .825 .431 .493 .524 .825 .590 .493 .524 .750 .493 .524 1.344 .875 .493 1.219 1.438 1.000 1.203 1.312 1.516 1.156 1.297 1.438 1.250 1.375 1.562 1.375 1.500 1.688 All dimensions for reference only. 16 PT06 (MS3116) SP06 straight plug S L J Z Q “W” Cable Seal L TERMINATION ASSEMBLIES “A” General Duty L “A” (SR), “E” (SR), “P” (SR), MS / “F” Strain Relief L V N “E” Open Wire Seal D “P” Potting Boot L L GDH N N N N D D PT06W-XX-XXX SP06W-XX-XXX PTG06W-XX-XXX C .375 MIN PT06A-XX-XXX SP06A-XX-XXX PTG06A-XX-XXX “J” Cable Seal PT06A-XX-XXX (SR) SP06A-XX-XXX (SR) PTG06A-XX-XXX (SR) PT06E-XX-XXX (SR) SP06E-XX-XXX (SR) PTG06E-XX-XXX (SR) PT06P-XX-XXX (SR) SP06P-XX-XXX (SR) PTG06P-XX-XXX (SR) MS3116F-XX-XXX PT06E-XX-XXX SP06E-XX-XXX PTG06E-XX-XXX MS3116E-XX-XXX XL PT06P-XX-XXX SP06P-XX-XXX PTG06P-XX-XXX MS3116P-XX-XXX N D PT06J-XX-XXX MS3116J-XX-XXX To complete part number see how to order on page 27. Shell Size Plug Front View S Max. J L Max. 6 8 10 12 14 16 18 20 22 24* .625 .750 .859 1.013 1.156 1.281 1.319 1.531 1.656 1.776 .353 .353 .353 .353 .353 .353 .353 .415 .415 .415 .906 .906 .906 .906 .906 .906 .906 1.062 1.062 1.125 Plug Side View Q Thread Class 2A .3125-32 NEF .4375-28 UNEF .5625-24 NEF .6875-24 NEF .8125-20 UNEF .9375-20 UNEF 1.0625-18 NEF 1.1875-18 NEF 1.3125-18 NEF 1.4375-18 NEF Class “A” (SR), “E” (SR), “P” (SR), MS / “F” Shell C Size Thread 6 8 10 12 14 16 18 20 22 24* – 6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 8-32 Class “E”, MS / “E” Z Max. D Min. L Max. .594 .594 .594 .594 .594 .594 .594 .672 .672 .672 .175 .297 .421 .546 .663 .787 .879 1.014 1.135 1.259 1.609 1.609 1.609 1.609 1.609 1.609 1.609 1.656 1.656 1.750 Class “A” N Max. V Thread Class A .462 .590 .717 .834 .970 1.088 1.216 1.332 1.460 1.587 Class “P”, MS / “P” .3750-32 NEF .5000-28 UNEF .6250-24 NEF .7500-20 UNEF .8750-20 UNEF 1.0000-20 UNEF 1.1875-18 NEF 1.1875-18 NEF 1.4375-18 NEF 1.4375-18 NEF Class “W”, “J” D D Min. G ±.010 H Max. L Max. N Max. L Max. N Max. D Min. L Max. N Max. Closed Free L Max. N Max. – .240 .302 .428 .552 .615 .740 .740 .928 .990 – .125 .188 .312 .375 .500 .625 .625 .750 .800 – .812 .875 1.000 1.125 1.188 1.438 1.438 1.625 1.750 – 1.906 1.906 1.906 1.906 2.047 2.078 2.250 2.250 2.312 – .550 .675 .803 .920 1.047 1.165 1.290 1.418 1.543 1.266 1.266 1.266 1.266 1.266 1.266 1.266 1.438 1.438 1.500 .440 .560 .685 .813 .930 1.057 1.175 1.301 1.430 1.555 .192 .317 .434 .548 .673 .798 .899 1.024 1.149 1.274 1.526 1.526 1.526 1.526 1.526 1.526 1.526 1.546 1.546 1.656 .484 .608 .734 .858 .984 1.110 1.234 1.360 1.484 1.610 – .168 .205 .338 .416 .550 .600 .635 .670 .740 – .230 .312 .442 .539 .616 .672 .747 .846 .894 – 1.705 1.705 1.848 2.040 2.256 2.486 2.844 3.000 3.210 – .547 .675 .812 .940 1.067 1.194 1.322 1.449 1.576 * Available in PT06 only All dimensions for reference only. 17 XL Max. – 2.271 2.271 2.411 2.599 2.943 3.172 3.610 3.766 3.985 PT07 (MS3114) SP07 jam nut receptacle S H M Z S “A” General Duty/ “C” Pressurized Receptacle PT07A-XX-XXX PT07C-XX-XXX J A R P K TERMINATION ASSEMBLIES “E” Open Wire Seal M “A” (SR), “E” (SR), “P” (SR), MS / “F” Strain Relief M Z N J A R P Z M GD H J A R L “P” Potting Boot PT07E-XX-XXX SP07E-XX-XXX MS3114E-XX-XXX D N J A C L P Z R PT07A-XX-XXX (SR) SP07A-XX-XXX (SR) PT07E-XX-XXX (SR) MS3114F-XX-XXX P L PT07P-XX-XXX MS3114P-XX-XXX To complete part number see how to order on page 27. Recept. Front View Shell Size 6 8 10 12 14 16 18 20 22 24 H ±.016 .625 .750 .875 1.062 1.188 1.312 1.438 1.562 1.688 1.816 Shell Size C Thread 6 8 10 12 14 16 18 20 22 24* – 6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 8-32 S .812 .938 1.062 1.250 1.375 1.500 1.625 1.812 1.938 2.062 A Dia. +.001 –.005 J Flat +.000 –.010 K +.011 –.010 .348 .473 .590 .750 .875 1.000 1.125 1.250 1.375 1.500 .405 .530 .655 .818 .942 1.066 1.191 1.316 1.441 1.566 .125 .125 .125 .125 .125 .125 .125 .156 .156 .156 Class “A” (SR), “P” (SR), MS / “F” D Max. G H L – .250 .312 .438 .562 .625 .750 .750 .938 1.000 – .125 .188 .312 .375 .500 .625 .625 .750 .800 – .781 .844 .969 1.094 1.156 1.406 1.406 1.594 1.594 * Size 24 strain relief available in PT only. – 1.062 1.062 1.062 1.062 1.188 1.188 1.250 1.250 1.250 Receptacle Side View P Panel Thickness Class “E”, MS / “E” M Min. Max. R Thread Class 2A UNEF .696 .696 .696 .696 .696 .696 .696 .884 .884 .917 .062 .062 .062 .062 .062 .062 .062 .062 .062 .062 .125 .125 .125 .125 .125 .125 .125 .250 .250 .250 .4375-28 .5625-24 .6875-24 .8750-20 1.0000-20 1.1250-18 1.2500-18 1.3750-18 1.5000-18 1.6250-18 Z L Max. M N Max. Z ±.040 .231 .231 .231 .231 .231 .231 .231 .261 .261 .228 .568 .568 .568 .568 .568 .568 .568 .630 .630 .660 .696 .696 .696 .696 .696 .696 .696 .884 .884 .917 .604 .729 .854 .979 1.104 1.229 1.354 1.510 1.635 1.760 .191 .191 .191 .191 .191 .191 .191 .221 .221 .188 Class “E” (SR) M C Thread D Max. G H L M D Max. – .696 .696 .696 .696 .696 .696 .884 .884 .917 – 6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 8-32 – .250 .312 .438 .562 .625 .750 .750 .938 1.000 – .125 .188 .312 .375 .500 .625 .625 .750 .800 – .775 .837 .963 1.087 1.150 1.400 1.400 1.587 1.681 – 1.029 1.029 1.029 1.029 1.161 1.161 1.224 1.224 1.320 – .696 .696 .696 .696 .696 .696 .884 .884 .917 .202 .327 .444 .558 .683 .808 .909 1.034 1.159 1.284 All dimensions for reference only. 18 Class “P”, MS / “P” L +.010 –.026 M N .593 .593 .593 .593 .593 .593 .593 .718 .718 .718 .696 .696 .696 .696 .696 .696 .696 .884 .884 .917 .484 .608 .734 .858 .984 1.110 1.234 1.360 1.484 1.610 Z .191 .191 .191 .191 .191 .191 .191 .221 .221 .188 PT08 E SP08 E 90 degree plug G TERMINATION ASSEMBLIES “E” Open Wire Seal, “E” (SR) Strain Relief “P” Potting Boot 75 degrees L L E A B PT08E-XX-XXX SP08E-XX-XXX PT08E-XX-XXX (SR) SP08E-XX-XXX (SR) H PT08P-XX-XXX SP08P-XX-XXX D K C To complete part number see how to order on page 27. All lockwire holes are .044 Dia. Min. Plug Front View Plug Side View Class “E”, “E” (SR) Shell Size G Dia. Max. B ±.031 C +.010 –.025 Class “P” D ±.062 E +.047 –.025 L ±.057 A ±.025 H ±.015 K ±.015 L Max. 8 .796 .655 .169 .941 .339 1.786 .469 .312 .438 1.656 10 .921 .749 .170 1.191 .393 1.880 .547 .438 .562 1.781 12 1.046 .812 .264 1.191 .450 1.965 .625 .516 .688 1.843 14 1.171 .905 .310 1.254 .519 2.113 .734 .625 .781 1.953 16 1.297 1.030 .330 1.316 .583 2.315 .750 .656 .890 2.000 18 1.422 1.015 .444 1.562 .621 2.423 .781 .703 1.000 2.046 20 1.562 1.077 .510 1.625 .683 2.695 .859 .766 1.125 2.218 22 1.672 1.139 .515 1.719 .739 2.742 .906 .812 1.234 2.265 24 1.797 1.265 .656 1.751 .797 2.980 1.169 .918 1.374 2.624 All dimensions for reference only. 19 PT Connectors with Printed Circuit Board Contacts S R L 4 HOLES .120 ± .005 Dia. (.147 ± .005 Dia., size 24) (TP) M .030 ± .001 Box Mounting Receptacle (PT02) with PCB Contacts R S A (TP) Order by applicable part number in chart below; add insert arrangement number. Refer to insert availability on pages 4-11. ■ (MMC) located within .0025 of (TP) N K Receptacle Front View Z Receptacle Side View Shell Size Part Number* PT02 with PCB Contacts R (TP) S +.011 –.010 A +.001 –.005 K +.021 –.010 L Max. M +.010 –.000 N Dia. Max. Z +.040 –.050 6 71-570120-XXX .469 .688 .348 .493 .825 .431 .323 .380 8 71-570121-XXX .594 .812 .473 .493 .825 .431 .449 .380 10 71-570122-XXX .719 .938 .590 .493 .825 .431 .573 .380 12 71-570123-XXX .812 1.031 .750 .493 .825 .431 .699 .380 14 71-570124-XXX .906 1.125 .875 .493 .825 .431 .823 .380 16 71-570125-XXX .969 1.219 1.000 .493 .825 .431 .949 .380 18 71-570126-XXX 1.062 1.312 1.125 .493 .825 .431 1.073 .380 20 71-570127-XXX 1.156 1.438 1.250 .650 1.076 .556 1.199 .286 22 71-570128-XXX 1.250 1.562 1.375 .650 1.076 .556 1.323 .286 24 71-570129-XXX 1.375 1.688 1.500 .683 1.109 .589 1.449 .253 All dimensions for reference only. S H Jam Nut Receptacle (PT07) with PCB Contacts M Z J A S All lockwire holes are .044 Dia. Min. Order by applicable part number in chart below; add insert arrangement number. Refer to insert availability on pages 4-11. .030 ± .001 R Receptacle Front View P K Receptacle Side View P Panel Thickness Shell Size Part Number* PT07 with PCB Contacts H +.017 –.016 S ±.010 A Dia. +.001 –.005 J Flat +.000 –.010 K +.011 –.010 M ±.010 Min. 6 71-533720-XXX .625 .812 .348 .405 .125 .696 .062 8 71-533721-XXX .750 .938 .473 .530 .125 .696 .062 10 71-533722-XXX .875 1.062 .590 .655 .125 .696 12 71-533723-XXX 1.062 1.250 .750 .818 .125 Max. R Thread Class 2A Z +.025 –.035 .125 .4375-28 UNEF .376 .125 .5625-24 UNEF .376 .062 .125 .6875-24 UNEF .376 .696 .062 .125 .8750-20 UNEF .376 14 71-533724-XXX 1.188 1.375 .875 .942 .125 .696 .062 .125 1.0000-20 UNEF .376 16 71-533725-XXX 1.312 1.500 1.000 1.066 .125 .696 .062 .125 1.1250-18 UNEF .376 18 71-533726-XXX 1.438 1.625 1.125 1.191 .125 .696 .062 .125 1.2500-18 UNEF .376 20 71-533727-XXX 1.562 1.812 1.250 1.316 .156 .884 .062 .250 1.3750-18 UNEF .367 22 71-533728-XXX 1.688 1.938 1.375 1.441 .156 .884 .062 .250 1.5000-18 UNEF .367 24 71-533729-XXX 1.816 2.062 1.500 1.566 .156 .917 .062 .250 1.6250-18 UNEF .334 All dimensions for reference only. * For RoHS compliance connectors with PCB contacts change “71”- to: “58” designates conductive black zinc cobalt plating “93” designates non-conductive black zinc cobalt plating 20 PTB SPB thru bulkhead receptacle L S R M PTB .120 ± .005 Dia. (.147 ± .005 Dia., size 24) SPB .150 ± .005 Dia. (TP) R S P 4 Holes A A (TP) K * PTB-XX-XXX * SPB-XX-XXX * To complete part number add desired arrangement number (refer to pages 4 and 5 for insert availability) and add “PS”; Example: PTB-18-32PS. If a rotation is required, use PTB-18-32PS and add W, X, Y or Z. Example: PTB-18-32 PSW. The socket end of the insert always appears at the “P” dimension end of shell. ■ (MMC) located within .0025 of (TP) Receptacle Front View R (TP) Receptacle Side View P Max. SPB A +.001 –.005 K +.016 –.000 L ±.005 M +.010 –.000 PTB SPB .953 .348 .625 1.050 .562 .125 .188 .812 1.047 .473 .625 1.050 .562 .125 .188 .938 1.125 .590 .625 1.050 .562 .125 .188 S Shell Size PTB SPB PTB 6 .469 .641 .688 8 .594 .734 10 .719 .812 12 .812 .938 1.031 1.250 .750 .625 1.050 .562 .125 .188 14 .906 1.031 1.125 1.344 .875 .625 1.050 .562 .125 .188 16 .969 1.125 1.219 1.438 1.000 .625 1.050 .562 .125 .188 18 1.062 1.203 1.312 1.516 1.125 .625 1.050 .562 .125 .188 20 1.156 1.297 1.438 1.672 1.250 .781 1.330 .688 .125 .312 22 1.250 1.375 1.562 1.750 1.375 .781 1.330 .688 .125 .312 24 1.375 1.500 1.688 1.875 1.500 .781 1.330 .688 .125 .312 All dimensions for reference only. 21 PT hermetic Three shell styles are available in the hermetic PT bayonet series: • PTIH (MS3113H) • PT02H • PT07H (MS3114H) These hermetic connectors are only available with solder cup or flat eyelet pin contacts in the MS/PT version. Socket contacts are available in some proprietary PT versions. Other design characteristics of the PT hermetic connector series are as follows: Shell sizes: 8 through 24 (tin plated) solder mounting receptacle Contact count: 2 through 61. Refer to pages 4 and 5 for insert availability for hermetics. Current: 5.0 amp each #20 contact 10 amp each #16 contact 17 amp each #12 contact Contacts are tin plated for PT; gold is optional Dielectric Withstanding Voltage (sea level): 1500 volts (RMS) 60 cps, Service Rating I 2300 volts (RMS) 60 cps, Service Rating II Compression glass inserts, permanently lettered Helium Leakage: Less than 1.0 X 10-6 cc/sec. at 15 psi differential box mounting receptacle Physical Shock: 100 G’s Vibration: Exceeds MIL-E-5272 Procedure II Thermal Shock: No deterioration or failure after 5 cycles at –55°F to +257°F Intermateability: Mates with MS3116 and PT06 Refer to pages 4-11 for insert arrangement availability. jam nut receptacle 22 PTIH (MS3113H) hermetic solder mounting receptacle L G W A N .031 +.006 –.005 * ** ** † †† †† Z PTIH-XX-XXX PTIY-XX-XXX MS3113H-XXCXXX PTIH-XX-XXX (100) PTIY-XX-XXX (100) MS3113H-XXYXXX To complete part number see how to order on page 27. * Solder cup pin contacts without interfacial seal ** Solder cup pin contacts with interfacial seal † Flat eyelet pin contacts without interfacial seal †† Flat eyelet pin contacts with interfacial seal Recept. Front View Receptacle Side View Shell Size G Dia. Max. A Dia. +.001 –.005 L +.025 –.016 N Dia. +.001 –.005 W +.011 –.010 Z Max. 6 .511 .348 .447 .438 .094 .386 8 .636 .473 .447 .562 .094 .386 10 .761 .590 .447 .672 .094 .386 12 .855 .750 .447 .781 .094 .386 14 .980 .875 .447 .906 .094 .386 16 1.105 1.000 .447 1.031 .094 .386 18 1.229 1.125 .447 1.156 .094 .386 20 1.323 1.250 .509 1.250 .094 .386 22 1.449 1.375 .509 1.375 .125 .418 24 1.574 1.500 .542 1.500 .125 .418 All dimensions for reference only. 23 PT02H hermetic box mounting receptacle PT .120 ± .005 Dia. (.147 ± .005 Dia., size 24) S R (TP) L W SP .150 ± .005 Dia. 4 Holes R S A (TP) N U * ** † †† Z PT02H-XX-XXX PT02Y-XX-XXX PT02H-XX-XXX (100) PT02Y-XX-XXX (100) To complete part number see how to order on page 27. * Solder cup pin contacts without interfacial seal ** Solder cup pin contacts with interfacial seal † Flat eyelet pin contacts without interfacial seal †† Flat eyelet pin contacts with interfacial seal ■ (MMC) located within .0025 of (TP) Receptacle Front View Receptacle Side View Shell Size R (TP) S ±.016 A Dia. +.001 –.005 K ±.015 L +.025 –.015 N Dia. +.001 –.005 U +.011 –.010 Z Max. 6 .469 .688 .348 .047 .494 .438 .062 8 .594 .812 .473 .047 .494 .562 .062 .344 .344 10 .719 .938 .590 .047 .494 .672 .062 .344 12 .812 1.031 .750 .047 .494 .781 .062 .344 14 .906 1.125 .875 .047 .494 .906 .062 .344 16 .969 1.219 1.000 .047 .494 1.031 .062 .344 18 1.062 1.312 1.125 .047 .494 1.156 .062 .344 20 1.156 1.438 1.250 .047 .556 1.250 .062 .344 22 1.250 1.562 1.375 .079 .556 1.375 .062 .377 24 1.375 1.688 1.500 .079 .588 1.500 .062 .377 All dimensions for reference only. 24 PT07H (MS3114H) hermetic jam nut receptacle S H M S Z A R * ** ** † †† †† P K PT07H-XX-XXX PT07Y-XX-XXX MS3114H-XXCXXX PT07H-XX-XXX (100) PT07Y-XX-XXX (100) MS3114H-XXYXXX To complete part number see how to order on page 27. * Solder cup pin contacts without interfacial seal ** Solder cup pin contacts with interfacial seal † Flat eyelet pin contacts without interfacial seal †† Flat eyelet pin contacts with interfacial seal Receptacle Front View Receptacle Side View S +.016 H Hex +.017 –.016 A +.001 –.005 K +.043 –.016 M +.031 –.000 6 .812 .625 .348 .094 8 .938 .750 .473 .094 Shell Size P Panel Thickness Max. Min. R Thread Class 2A .696 .125 .062 .4375-28 UNEF .206 .696 .125 .062 .5625-24 NEF .206 Z Max. 10 1.062 .875 .590 .094 .696 .125 .062 .6875-24 NEF .206 12 1.250 1.062 .750 .094 .696 .125 .062 .8750-20 UNEF .206 14 1.375 1.188 .875 .094 .696 .125 .062 1.0000-20 UNEF .206 16 1.500 1.312 1.000 .094 .696 .125 .062 1.1250-18 NEF .206 18 1.625 1.438 1.125 .094 .696 .125 .062 1.2500-18 NEF .206 20 1.812 1.562 1.250 .125 .884 .250 .062 1.3750-18 NEF .081 22 1.938 1.688 1.375 .125 .884 .250 .062 1.5000-18 NEF .081 24 2.062 1.812 1.500 .125 .917 .250 .062 1.6250-18 NEF .048 All dimensions for reference only. 25 PT Breakaway twist pull plug The PT miniature breakaway connector has the following design features: • solder contacts, potted termination • instant decoupling of plug and receptacle with an axial pull on the lanyard when they are fully mated • intermateable with standard receptacles • operating voltage to 900 VAC (RMS) at sea level • same quick positive bayonet coupling and 5 key/ keyway polarization as other PT styles 4.500 ±.250 L +.010 –.025 SOCKET INSERT .016 J .328 +.010 –.025 PIN INSERT H B LANYARD PULLED TAUT AGAINST A .200 ±.031 DIA MANDREL Part Number* Shell Size A Dia. Max. B Max. H ±.016 J ±.010 L Max. 71-304808 8 .875 .984 .327 .353 1.937 71-304810 10 1.125 1.125 .444 .353 1.890 71-304812 12 1.281 1.406 .558 .353 1.906 71-304814 14 1.438 1.562 .683 .353 1.953 71-304816 16 1.562 1.688 .808 .353 2.000 71-304818 18 1.718 1.844 .909 .353 2.031 71-304820 20 1.875 2.000 1.034 .415 2.234 71-304822 22 2.031 2.188 1.159 .415 2.328 71-304824 24 2.156 2.312 1.284 .415 2.359 A Breakaway Plug with PT Solder Contacts, Potted Termination 71-3048XX-( ) 72-3048XX-( ) All dimensions for reference only. * See Finish information below to determine prefix 71 or 72 in part number. Drawing above shows standard lanyard length. Order by Amphenol Propriety number as follows (example part number shown): 71 3048 18 32 P 1 2 3 4 1. Finish “71”designates corrosion resistant olive drab cadmium plate “72” designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and corrosion resistance, 500 hour extended salt spray. 2. Connector Type Identification 3048 designates PT plug, solder, potted termination style 3. Shell Size and Insert Arrangement Number See insert arrangement availability for Miniature Breakaway connectors on page 6. The numbers in the insert arrangement are hyphenated. The number preceding the hyphen is the shell size. The number following the hyphen is the insert arrangement number. 4. Contact Type/Alternate Insert Rotation P designates pin, S designates socket for normal positioning of inserts. When an alternate position of the insert is required to prevent cross-mating a different letter (other than P or S) is used. See page 7 for description of alternate positions; then convert to Amphenol proprietary coding by the chart at right to complete the part number. Pin Contacts Amphenol Equates to Letter MS letter G PW I PX K PY M PZ 26 Socket Contacts Amphenol Equates to Letter MS letter H SW J SX L SY N SZ PT, SP, MS/PT how to order PT, SP 1 2 3 4 5 6 7 8 MS/PT MIL-C-26482, Series 1 Part number MS3110E20-41PW is shown as follows: MS 311 0 E 20 - 41 P W 1 C E See code below: 1. Connector Type “PT” designates standard olive drab, electrically conductive cadmium plate bayonet lock connector with solder contacts “SP” designates electrically non-conductive, hard anodic coated bayonet lock connector with solder contacts and larger flange and mounting holes for back panel mounting “PTG” designates plug with grounding fingers 2. Shell Style “00” designates wall mounting receptacle “01” designates cable connecting receptacle** “02” designates box mounting receptacle “06” designates straight plug “07” designates jam nut receptacle “08” designates 90 degree plug cable support “B” designates thru bulkhead receptacle (pressurized) designates solder mount receptacle (Hermetic only) “I ” 3. Service Classes “A” designates general duty back shell “C” designates pressurized receptacle “E” designates environmental resisting open wire seal with grommet and nut “J” designates clamp assembly for moisture proofing multi-jacketed cables, with strain relief “P” designates assembly with potting boot W” designates clamp assembly for moisture proofing multi-jacketed cables “H” designates hermetic* without interfacial seal “Y” designates hermetic* with interfacial seal 4. Shell Size “20” designates shell size. Shell sizes 6 through 24 available. 5. Insert Arrangement - Refer to pages 4-11 for insert availability. “20 - 41” designates insert arrangement. (The number following the hyphen is the number only that is used in the part number). 6. Contacts “P” designates pin contacts “S” designates socket contacts For ordering connectors with printed circuit board contacts, see pg. 20. 7. Insert Rotation - Refer to page 7. “W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from “normal position. No letter required for normal (no rotation) position. 8. “SR” designates a strain relief clamp. Indicate optional finishes as follows: (003) olive drab cadmium plate (standard on “PT”) (005) anodic coating - Alumilite® (standard on “SP”) (014) olive drab cadmium plate over nickel (023) electroless nickel (024) olive drab zinc cobalt plating (424) electroless nickel finish with strain relief (466) olive drab zinc cobalt plating with strain relief (100) Suffix added for flat eyelet pin contacts in hermetic versions OR pheno l Am RoHS Compliant finish suffix as follow: HS (025) non-conductive black zinc cobalt plating Ro (027) conductive black zinc cobalt plating U E /2 002 / 95 / (470) non-conductive black zinc cobalt plating with strain relief 27 (476) conductive black zinc cobalt plating with strain relief 2 3 4 5 6 For Hermetic connectors part number MS3113H20Y41PW is shown as follows: MS 311 3 H 20 Y 41 1 2 3 4 5, 6 7 8 P W 7 8 See code below: 1. “MS” designates Military Standard 2. Specification Number “311” designates basic family number for MIL-C26482, Series 1 solder type 3. Shell Style “0” designates wall mounting receptacle “1” designates cable connecting receptacle** “2” designates box mounting receptacle “3” designates solder mount receptacle (hermetic only) “4” designates jam nut receptacle “6” designates straight plug 4. Service Class “E” designates environmental resisting connector “F” designates environmental resisting connectors with strain relief “J” designates clamp assembly for moisture proofing multi-jacketed cables, with strain relief “P” designates potted type with potting boot “H” designates hermetic 5. Shell Size “20” designates shell size. Shell sizes 8 through 24 available. 6. Insert Arrangement - Refer to pages 4-11 for insert availability. “20 - 41” designates arrangement. (The number following the hyphen is the number only that is used in the part number). Hermetic version “20Y41” designates insert arrangement; specify “Y” for flat eyelet pin contacts, or “C” for solder cup pin contacts 7. Contact Configuration “P” designates pin contacts “S” designates socket contacts 8. Insert Rotation- Refer to page 7. “W”, “X”, “Y”, “Z” designate that insert is rotated in it shell from “normal” position. No letter require fo normal (no rotation) position. * Hermetic connectors are supplied with tin plated shells. ** This connector style is sometimes referred to as a cable connecting “plug”. It does, however, mate with either a straight or 90 degree plug. For ordering Miniature Breakaway PT Solder connectors see pg. 26. HOW TO ORDER PT, SP, MS/PT To more easily illustrate ordering procedure, part number PT00A-20-41PW(SR) is shown as follows: PT 00 A - 20 - 41 P W (SR) Amphenol ® PT-SE, SP-SE, MS/PT-SE Proprietary/MIL-C-26482, Series 1 bayonet coupling and crimp termination Amphenol® SE crimp type miniature connectors provide performance and versatility needed for applications demanding high reliability and crimp removable contacts. These crimp contacts are rear insertable/front release and are held in position by an MS approved spring tower retention system. wall mounting receptacle The MS/PT-SE Series is qualified to MIL-C-26482, Series 1 and has all the outstanding design characteristics and quality of the PT Series. The SP-SE Series is a modification of the PT-SE, providing special shells with a wide mounting flange for back panel mounting. A corrosion resistant electrically conductive finish of cadmium plate with an olive drab chromate after-treatment is used on the PT-SE and MS/PT-SE. The SP-SE is given a durable non-conductive hard anodic “Alumilite”® coating which provides abrasion protection and resistance to corrosion. Shell components for these series are aluminum. The dependable 5 key/keyway polarization with bayonet lock coupling assures positive mating with no chance of cross plugging. Spring tension provided by a wave washer in the coupling nut ensures maintenance of interfacial seal between mating halves. Both the insert and main joint gasket are molded from resilient neoprene. This provides excellent moisture sealing at the gasket and superior electrical isolation of the contact in the insert. Both pins and sockets are machined from a copper alloy and are gold plated. This gold plating eliminates contact corrosion and offers an indefinite shelf life. Socket contacts for these series are a closed entry design. Breakaway style plug is available in PT-SE crimp. The PT-SE, SP-SE and MS/PT-SE Series are intermateable and intermountable with all existing Miniature Cylindrical Series connectors except for the threaded coupling PC Series. cable connecting receptacle* box mounting receptacle straight plug jam nut receptacle Refer to pages 4-11 for insert arrangement availability. * This connector style is sometimes referred to as a cable connecting “plug”. It does, however, mate with either a straight or 90 degree plug. breakaway twist pull plug 28 PT-SE. SP-SE, MS/PT-SE Contact Specifications Maximum Millivolt Drop† Crimp Well Diameter Minimum Well Depth 20 7.5 55 .049 ±.001 .267 16 13.0 49 .067 ±.001 .236 12 23.0 42 .100 ±.002 .236 “SE”, MS / “E” open wire seal Service Rating Recommended Operating AC Voltage at Sea Level Sea Level I 600 1,500 500 375 200 II 1,000 2,300 750 500 200 Service Rating Test Voltage AC (RMS), 60 cps 50,000 ft. 70,000 110,000 ft. ft. † Silver plated wire per MIL-C-26482 PT-SE and SP-SE Service Classes PT-SE and SP-SE connectors are available in the three service classes listed below. “SE” “SE” (SR), MS / “F” strain relief clamp Open wire sealing - environmental resistant, with a nut and grommet for moisture proofing individual wires “SE” (SR)Strain relief clamp - environmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support “SP” Translucent nylon boot for retaining customer applied potting compounds; held in place by a threaded ring Breakaway style - see page 38. MS/PT-SE Service Classes “SP”, MS / “P” potting boot MS-SE series connectors are available in the following certified service classes: “E” Open wire sealing - environmental resisting connectors are supplied with a multi-hole grommet and clamping nut for moisture proofing individual open wires “F” Environmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support “P” Potting applications - these connectors are supplied with a translucent nylon boot for retention of customer applied potting compound 29 BAYONET COUPLING WITH CRIMP CONTACTS Test Current PT-SE, SP-SE, MS/PT-SE Contact Size PT00 SE (MS3120) SP00 SE wall mounting receptacle S R T Dia. 4 Holes (TP) R S (TP) TERMINATION ASSEMBLIES “SE” Open Wire Seal “SE” (SR), MS / “F” Strain Relief L L M A N M “SP” Potting Boot L K A G A N K D N M PT00SE-XX-XXX SP00SE-XX-XXX MS3120E-XX-XXX PT00SE-XX-XXX (SR) SP00SE-XX-XXX (SR) MS3120F-XX-XXX K PT00SP-XX-XXX SP00SP-XX-XXX To complete part number see how to order on page 39. ■ (MMC) located within .005 of (TP) Receptacle Front View Shell Size 8 10 12 14 16 18 20 22 24 R (TP) S Max. T Dia. ± .005 PT SP PT SP PT SP A Dia. +.001 –.005 .594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 – .812 .938 1.031 1.125 1.203 1.297 1.375 1.500 .828 .954 1.047 1.141 1.234 1.328 1.453 1.578 1.703 – 1.141 1.266 1.360 1.453 1.532 1.688 1.766 1.891 .120 .120 .120 .120 .120 .120 .120 .120 .147 – .150 .150 .150 .150 .150 .150 .150 .150 .473 .590 .750 .875 1.000 1.125 1.250 1.375 1.500 Shell Size Class “SE”, MS / “E” L N Dia. Max. Max G Dia. 8 10 12 14 16 18 20 22 24 1.328 1.328 1.328 1.328 1.328 1.328 1.359 1.359 1.422 .125 .188 .312 .375 .500 .625 .625 .750 .800 .560 .704 .825 .954 1.080 1.204 1.330 1.454 1.580 Class “SE” (SR), MS / “F” L N Max. Max. 2.422 2.422 2.422 2.422 2.537 2.537 2.824 2.824 2.900 * Back panel mounting All dimensions for reference only. 30 .781 .844 .969 1.094 1.156 1.406 1.406 1.594 1.688 K ±.016 .062 .062 .062 .062 .062 .062 .094 .094 .094 Receptacle Side View M +.010 P* –.000 Max. Panel Thickness PT SP PT SP .431 .431 .431 .431 .431 .431 .556 .556 .589 – .462 .462 .462 .462 .462 .556 .556 .589 .094 .094 .094 .094 .094 .094 .219 .219 .219 – .125 .125 .125 .125 .125 .219 .219 .219 D Dia. Max. Class “SP”, MS / “P” L Max. N Dia. Max. – .444 .558 .683 .808 .909 1.034 1.159 1.284 – 1.656 1.656 1.656 1.656 1.656 1.750 1.750 1.782 – .734 .858 .984 1.110 1.234 1.360 1.484 1.610 MF00 SE (MS3128) wall mounting receptacle T¹ Dia. 4 Holes S R¹ (TP) R (TP) R R¹ (TP) (TP) S T Dia. 4 Holes TERMINATION ASSEMBLIES MS / “E” Open Wire Seal MS / “F” Strain Relief L N A M L K M A K MF00SE-XX-XXX MS3128E-XX-XXX GF N MF00SE-XX-XXX (SR) MS3128F-XX-XXX To complete part number see how to order on page 39. ■ (MMC) located within .0025 of (TP) Receptacle Front View Receptacle Side View T Dia. ±.005 T1 Dia. ±.005 A Dia. +.001 –.005 K ±.016 M +.010 –.000 Class MS / “E” Class MS / “F” R R1 S Max. 10 .719 .812 1.141 .120 .150 .590 .062 .462 1.328 .685 .297 .188 1.906 .891 12 .812 .938 1.266 .120 .150 .750 .062 .462 1.328 .813 .422 .312 1.906 1.016 14 .906 1.031 1.360 .120 .150 .875 .062 .462 1.328 .930 .547 .375 1.906 1.141 16 .969 1.125 1.453 .120 .150 1.000 .062 .462 1.328 1.057 .609 .500 2.000 1.203 18 1.062 1.203 1.532 .120 .150 1.125 .062 .462 1.328 1.175 .734 .625 2.000 1.469 20 1.156 1.297 1.688 .120 .150 1.250 .094 .556 1.359 1.301 .734 .625 2.172 1.469 22 1.250 1.375 1.766 .120 .150 1.375 .094 .556 1.359 1.428 .922 .750 2.172 1.656 24 1.375 1.500 1.891 .147 .150 1.500 .094 .589 1.422 1.533 .984 .800 2.234 1.750 Shell Size All dimensions for reference only. 31 L Max. N Max. F Min. G Dia. L Max. N Max. PT01 SE (MS3121) SP01 SE cable connecting receptacle S S TERMINATION ASSEMBLIES “SE”, MS / “E” Open Wire Seal “SE” (SR), MS / “F” Strain Relief “SP”, MS / “P” Potting Boot L L A N A L K G D N A N K PT01SE-XX-XXX SP01SE-XX-XXX MS3121E-XX-XXX K PT01SE-XX-XXX (SR) SP01SE-XX-XXX (SR) MS3121F-XX-XXX PT01SP-XX-XXX SP01SP-XX-XXX MS3121P-XX-XXX Note: This connector style is sometimes referred to as a cable connecting “plug”. It does, however, mate with either a straight or 90 degree plug. To complete part number see how to order on page 39. Receptacle Front View Receptacle Side View Class “SE”, MS / “E” Shell Size S Max. A Dia. +.001 –.005 K ±.018 L Max. Class “SE” (SR), MS / “F” N Dia. Max. G Dia. L Max. N Max. Class “SP”, MS / “P” D Dia. L Max. N Dia. Max. 8 .812 .473 .094 1.522 .560 .125 2.422 .828 – – – 10 .955 .590 .094 1.522 .685 .188 2.422 .891 .444 1.656 .734 12 1.048 .750 .094 1.522 .813 .312 2.422 1.016 .558 1.656 .858 14 1.142 .875 .094 1.522 .930 .375 2.422 1.141 .683 1.656 .984 16 1.236 1.000 .094 1.522 1.057 .500 2.537 1.203 .808 1.656 1.110 18 1.329 1.125 .094 1.522 1.175 .625 2.537 1.469 .909 1.656 1.234 20 1.455 1.250 .115 1.709 1.301 .625 2.824 1.469 1.034 1.750 1.360 22 1.579 1.375 .115 1.709 1.428 .750 2.824 1.656 1.159 1.750 1.484 24 1.709 1.500 .115 1.709 1.555 .800 2.900 1.750 1.284 1.782 1.610 All dimensions for reference only. 32 PT02 SE (MS3122) SP02 SE box mounting receptacle S L R M (TP) K R S (TP) A T Dia. 4 Holes N D PT02SE-XX-XXX SP02SE-XX-XXX MS3122E-XX-XXX To complete part number see how to order on page 39. ■ (MMC) located within .0025 of (TP) Receptacle Front View Receptacle Side View T Dia. ±.005 A Dia. +.001 –.005 M +.010 –.000 PT SP K ±.016 L Max. PT SP N Dia. +.011 –.000 .473 .312 – .062 1.296 .431 – .438 .150 .590 .312 .219 .062 1.296 .431 .462 .562 .120 .150 .750 .312 .219 .062 1.296 .431 .462 .688 .120 .150 .875 .312 .219 .062 1.296 .431 .462 .812 1.453 .120 .150 1.000 .312 .219 .062 1.296 .431 .462 .938 1.328 1.532 .120 .150 1.125 .312 .219 .062 1.296 .431 .462 1.062 1.297 1.453 1.688 .120 .150 1.250 .406 .344 .094 1.358 .556 .556 1.188 1.375 1.578 1.766 .120 .150 1.375 .406 .344 .094 1.358 .556 .556 1.312 1.500 1.703 1.891 .147 .150 1.500 .406 .344 .094 1.358 .589 .589 1.438 S Max. R Shell Size PT SP 8 .594 – 10 .719 12 14 PT SP PT SP .828 – .120 – .812 .954 1.141 .120 .812 .938 1.047 1.266 .906 1.031 1.141 1.360 16 .969 1.125 1.234 18 1.062 1.203 20 1.156 22 1.250 24 1.375 All dimensions for reference only. 33 D Max. MF02 SE (MS3127) box mounting receptacle T¹ Dia. 4 Holes S R¹ L (TP) M R K (TP) R R¹ (TP) (TP) S A T Dia. 4 Holes N D MF02SE-XX-XXX MS3127E-XX-XXX To complete part number see how to order on page 39. ■ (MMC) located within .0025 of (TP) Receptacle Front View Shell Size N Dia. +.011 –.000 Receptacle Side View 1 S Max. T ±.005 T1 ±.005 A Dia. +.001 –.005 D Max. K ±.016 L Max. M +.010 –.000 R R 10 .562 .719 .812 1.141 .120 .150 .590 .219 .062 1.266 .462 12 .688 .812 .938 1.266 .120 .150 .750 .219 .062 1.266 .462 14 .812 .906 1.031 1.360 .120 .150 .875 .219 .062 1.266 .462 16 .938 .969 1.125 1.453 .120 .150 1.000 .219 .062 1.266 .462 18 1.062 1.062 1.203 1.532 .120 .150 1.125 .219 .062 1.266 .462 20 1.188 1.156 1.297 1.688 .120 .150 1.250 .344 .094 1.328 .556 22 1.312 1.250 1.375 1.766 .120 .150 1.375 .344 .094 1.328 .556 24 1.438 1.375 1.500 1.891 .147 .150 1.500 .344 .094 1.328 .589 All dimensions for reference only. 34 PT06 SE (MS3126) SP06 SE straight plug S TERMINATION ASSEMBLIES “SE”, MS / “E” Open Wire Seal “SE” (SR), MS / “F” Strain Relief L “SP”, MS / “P” Potting Boot L L N G N Z pin contacts Z¹ socket contacts D N Z pin contacts Z¹ socket contacts PT06SE-XX-XXX SP06SE-XX-XXX PTG06SE-XX-XXX MS3126E-XX-XXX Z pin contacts Z¹ socket contacts PT06SE-XX-XXX (SR) SP06SE-XX-XXX (SR) PTG06SE-XX-XXX (SR) MS3126F-XX-XXX PT06SP-XX-XXX SP06SP-XX-XXX PTG06SP-XX-XXX MS3126P-XX-XXX To complete part number see how to order on page 39. Plug Front View Plug Side View Class “SE”, MS / “E” Class “SE” (SR), MS / “F” Class “SP”, MS / “P” Shell Size S Dia. Max. Z ±.045 Z1 ±.045 L Max. N Max. G Dia. L Max. N Max. D Dia. L Max. N Dia. Max. 8* .734 .640 .579 1.328 .540 .125 2.413 .828 .327 1.750 .578 10 .859 .640 .579 1.328 .685 .188 2.413 .891 .444 1.750 .734 12 1.031 .640 .579 1.328 .813 .312 2.413 1.016 .558 1.750 .858 14 1.156 .640 .579 1.328 .930 .375 2.413 1.141 .683 1.750 .984 16 1.281 .640 .579 1.328 1.057 .500 2.528 1.203 .808 1.750 1.110 18 1.391 .640 .579 1.328 1.175 .625 2.528 1.469 .909 1.750 1.234 20 1.531 .640 .579 1.297 1.301 .625 2.753 1.469 1.034 1.750 1.360 22 1.656 .640 .579 1.297 1.428 .750 2.753 1.656 1.159 1.750 1.484 24 1.777 .640 .579 1.359 1.533 .800 2.830 1.750 1.284 1.766 1.610 * PT-SE, MS-SE and MS-SP only. All dimensions for reference only. 35 PT07 SE (MS3124) SP07 SE jam nut receptacle S H S TERMINATION ASSEMBLIES “SE”, MS / “E” Open Wire Seal “SE” (SR), MS / “F” Strain Relief L “SP”, MS / “P” Potting Boot L L M M M K R K K N J A F N J A R P P PT07SE-XX-XXX SP07SE-XX-XXX MS3124E-XX-XXX G N J A R P PT07SE-XX-XXX (SR) SP07SE-XX-XXX (SR) MS3124F-XX-XXX PT07SP-XX-XXX SP07SP-XX-XXX MS3124P-XX-XXX To complete part number see how to order on page 39. All lockwire holes are .044 Dia. Min. Receptacle Front View Shell Size H Hex Max. S Max. A Dia. +.001 –.005 8 10 12 14 16 18 20 22 24 .767 .892 1.079 1.205 1.329 1.455 1.579 1.705 1.829 .954 1.078 1.266 1.391 1.516 1.641 1.828 1.954 2.078 .473 .590 .750 .875 1.000 1.125 1.250 1.375 1.500 Shell Size 8 10 12 14 16 18 20 22 24 Class “SE”, MS / “E” L N Max. Max. 1.438 1.438 1.438 1.438 1.438 1.438 1.625 1.625 1.688 .749 .874 .999 1.124 1.249 1.374 1.530 1.655 1.780 F Min. .234 .297 .422 .547 .609 .734 .734 .922 .984 J Flat +.000 –.010 K +.011 –.010 .530 .655 .818 .942 1.066 1.191 1.316 1.441 1.566 .125 .125 .125 .125 .125 .125 .156 .156 .156 Receptacle Side View P Panel Thickness M ±.005 Min. Max. .696 .696 .696 .696 .696 .696 .884 .884 .917 Class “SE” (SR), MS / “F” G Dia. L Free Max. .125 .188 .312 .375 .500 .625 .625 .750 .800 1.922 1.922 1.922 1.922 2.000 2.000 2.172 2.172 2.234 All dimensions for reference only. 36 .062 .062 .062 .062 .062 .062 .062 .062 .062 .125 .125 .125 .125 .125 .125 .250 .250 .250 R Thread Class 2A .5625-24 UNEF .6875-24 NEF .8750-20 UNEF 1.0000-20 UNEF 1.1250-18 NEF 1.2500-18 NEF 1.3750-18 NEF 1.5000-18 NEF 1.6250-18 NEF Class “SP”, MS /”P” L N Dia. Max. Max. N Max. G Dia. .828 .891 1.016 1.141 1.203 1.469 1.469 1.656 1.750 – .444 .558 .683 .808 .909 1.034 1.159 1.284 – 1.656 1.656 1.656 1.656 1.656 1.922 1.922 1.951 – .734 .858 .984 1.110 1.234 1.360 1.484 1.610 PT08 SE SP08 SE 90 degree plug G TERMINATION ASSEMBLIES “SE” Open Wire Seal, “SE” (SR) Strain Relief “SP” Potting Boot 75 degrees L L E A B PT08SE-XX-XXX SP08SE-XX-XXX PT08SE-XX-XXX (SR) SP08SE-XX-XXX (SR) PT08SP-XX-XXX SP08SP-XX-XXX H D K C To complete part number see how to order on page 39. All lockwire holes are .044 Dia. Min. Plug Front View Plug Side View Class “SE”, “SE” (SR) G Dia. Max. B ±.031 C +.010 –.025 10 12 .921 .749 1.046 .812 14 1.171 16 18 Class “SP” D ±.062 E +.047 –.025 L Max. A ±.025 H ±.015 K ±.015 L Max. .170 1.191 .393 2.137 .547 .438 .562 2.031 .264 1.191 .450 2.222 .625 .516 .688 2.093 .905 .310 1.254 .519 2.370 .734 .625 .781 2.203 1.297 1.030 .330 1.316 .583 2.572 .750 .656 .890 2.250 1.422 1.015 .444 1.562 .621 2.680 .781 .703 1.000 2.296 20 1.562 1.077 .510 1.625 .683 2.753 .859 .766 1.125 2.343 22 1.672 1.139 .515 1.719 .739 2.799 .906 .812 1.234 2.390 24 1.797 1.250 .656 1.750 .787 3.037 1.181 .918 1.374 2.624 Shell Size All dimensions for reference only. 37 PT-SE Breakaway twist pull plug 4.500 ±.250 The PT-SE miniature breakaway connector has the following design features: • crimp front release, front removable contacts in “SE” spring tower retention system • 3 styles available: potted termination, environmental style and environment style with a strain relief • instant decoupling of plug and receptacle with an axial pull on the lanyard when they are fully mated • intermateable with standard receptacles • operating voltage to 900 VAC (RMS) at sea level • quick positive bayonet coupling and 5 key/keyway polarization L D SOCKET INSERT J C PIN INSERT B LANYARD PULLED TAUT AGAINST A .200 ±.031 DIA MANDREL 4.500 ±.250 Breakaway PT-SE with Crimp Contacts, Environmental 71-3455XX-( ) 72-3455XX-( ) 5.000 ±.250 L1 L2 D SOCKET INSERT J D SOCKET INSERT C PIN INSERT H A J C PIN INSERT F Breakaway PT-SE with Crimp Contacts, Potted Termination 71-4196XX-( ) 72-4196XX-( ) Breakaway PT-SE with Crimp Contacts, Environmental with Strain Relief 71-2511XX-( ) 72-2511XX-( ) Part Number* Part Number* Part Number* Shell Size A Dia. Max. B Max. C +.020 –.000 D +.020 –.000 F Dia. ±.016 H Dia. ±.016 J ±.010 L Max. L1 Max. L2 Max. 71-419646 71-251181 71-345510 10 1.125 1.125 .030 .337 .188 .444 .353 1.875 2.140 2.156 71-419647 71-251182 71-345512 12 1.281 1.406 .030 .337 .312 .558 .353 1.875 2.156 2.406 71-419648 71-251183 71-345514 14 1.438 1.562 .030 .337 .375 .683 .353 1.906 2.203 2.406 71-419649 71-419650 71-251184 71-251185 71-345516 71-345518 16 18 1.562 1.718 1.688 1.844 .030 .030 .337 .337 .500 .625 .808 .909 .353 .353 1.969 2.000 2.250 2.281 2.531 2.531 71-419651 71-251186 71-345520 20 1.875 2.000 .092 .399 .625 1.034 .415 2.281 2.359 2.719 71-419652 71-251187 71-345522 22 2.031 2.188 .092 .399 .750 1.159 .415 2.344 2.453 2.844 71-419653 71-251188 71-345524 24 2.156 2.312 .092 .399 .800 1.284 .415 2.406 2.453 2.906 All dimensions for reference only. * See Finish information below to determine prefix 71 or 72 in part number. Drawing above shows standard lanyard length. Order by Amphenol Propriety number as follows (example part number shown): 71 4196 50 32 P 1 2 3 4 5 1. Finish “71” designates corrosion resistant olive drab cadmium plate “72” designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and corrosion resistance, 500 hr. extended salt spray. 2. Connector Type Identification 4196XX designates PT-SE plug, crimp, potted termination style 2511XX designates PT-SE plug, crimp, environmental with strain relief style 3455XX designates PT-SE plug, crimp, environmental 3. Shell Size See part number columns in chart above for 2 digit number at end that correlates to the shell size. Example: ‘50’ correlates to shell size 18. 4. Insert Arrangement Number See insert availability for Miniature Breakaway connectors on page 6. The number following the hyphen is the insert arrangement number. 5. Contact Type/Alternate Insert Rotation Pin Contacts Socket Contacts P designates pin, S designates socket for normal positioning of inserts. When an alternate position of the insert is required to prevent cross-mating a different letter Amphenol Equates to Amphenol Equates to Letter MS letter Letter MS letter (other than P or S) is used. See page 7 for description of alternate positions; then convert to Amphenol proprietary coding by the chart at right to complete the part number. G PW H SW 38 I K M PX PY PZ J L N SX SY SZ PT-SE, SP-SE, MS/PT-SE how to order MS/PT-SE MIL-C-26482, Series 1 PT-SE, SP-SE 1 2 3 4 5 6 7 To more easily illustrate ordering procedure, part number MS3120E20-41PW is shown as follows: MS 312 0 E 20 – 41 P W 8 C E See code below: 1. Connector Type “PT” designates standard olive drab, electrically conductive cadmium plated, bayonet lock connector with crimp contacts “MF” designates standard olive drab, electrically conductive cadmium plated, bayonet lock connector with dual mounting holes, and crimp contacts “SP” designates electrically non-conductive, hard anodic coated, bayonet lock connector with larger flange and mounting holes for back panel mounting, and crimp contacts “PTG” designates plug with grounding fingers 2. Shell Style “00” designates wall mounting receptacle “01” designates cable connecting receptacle* “02” designates box mounting receptacle “06” designates straight plug “07” designates jam nut receptacle “08” designates 90 degree plug 3. Service Classes “SE” designates environmental crimp “SP” designates potted type crimp Both of the above are Amphenol proprietary versions of the MIL-C26482, Series 1 crimp contact connector and offer 15 lbs. contact retention for size 20 contacts; 25 lbs. for size 16 contacts. 4. Shell Size “20” designates shell size. Shell sizes 8 through 24 available. 5. Insert Arrangement Refer to pages 4-11 for insert availability. “20 - 41” designates insert arrangement. (The number following the hyphen is the number only that is used in the part number). 6. Contacts “P” designates pin contacts “S” designates socket contacts 7. Insert Rotation Refer to page 7. “W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from “normal” position. No letter required for normal (no rotation) position. 8. “SR” designates a strain relief clamp. Indicate optional finishes as follows: (003) olive drab cadmium plate (standard on “PT”) (005) anodic coating - Alumilite® (standard on “SP”) (014) olive drab cadmium plate over nickel (023) electroless nickel (024) olive drab zinc cobalt plating (424) electroless nickel finish with strain relief (466) olive drab zinc cobalt plating with strain relief OR RoHS Compliant finish suffix as follow: (025) non-conductive black zinc cobalt plating pheno l Am (027) conductive black zinc cobalt plating oHS R (470) non-conductive black zinc cobalt plating with strain relief U E /2 002 / 95 / (476) conductive black zinc cobalt with strain relief 39 1 2 3 4 5 6 7 8 See code below: 1. “MS” designates Military Standard 2. Specification Number “312” designates basic family for MIL-C-26482, Series 1 crimp type 3. Shell Style “0” designates wall mounting receptacle “1” designates cable connecting receptacle* “2” designates box mounting receptacle “4” designates jam nut receptacle “6” designates straight plug “7” designates box mounting receptacle with dual mounting holes “8” designates wall mounting receptacle with dual mounting holes 4. Service Class “E” designates environmental resisting connector “F” designates environmental resisting connector with strain relief “P” designates potted type with potting boot 5. Shell Size “20” designates shell size. Shell sizes 8 through 24 available 6. Insert Arrangement Refer to pages 4-11 for insert availability. “20 - 41” designates insert arrangement. (The number following the hyphen is the number only that is used in the part number). 7. Contacts “P” designates pin contacts “S” designates socket contacts 8. Insert Rotation Refer to page 7. “W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from the “normal” position. No letter required for normal (no rotation) position. * This connector style is sometimes referred to as a cable connecting “plug”. It does, however, mate with either a straight or 90 degree plug. For ordering Miniature Breakaway PT-SE Crimp connectors see pg. 38. HOW TO ORDER PT-SE, SP-SE, MS/PT-SE To more easily illustrate ordering procedure, part number PT00SE-2041PW(SR) is shown as follows: PT 00 SE - 20 - 41 P W (SR) Amphenol ® PT-CE, SP-CE bayonet coupling, crimp termination Amphenol® CE crimp type miniature connectors provide performance and versatility needed for applications demanding high reliability and crimp removable contacts. These crimp contacts are rear insertable/front release and are held in position by a nylon wafer retention system. wall mounting receptacle The SP-CE Series is a modification of the PT-CE, providing special shells with a wide mounting flange for back panel mounting. A corrosion resistant electrically conductive finish of cadmium plate with an olive drab chromate after-treatment is used on the PT-CE. The SP-CE is given a durable nonconductive hard anodic “Alumilite”® coating which provides abrasion protection and resistance to corrosion. Shell components for these versions are aluminum. The dependable 5 key/keyway polarization with bayonet lock coupling assures positive mating with no chance of cross plugging. Spring tension provided by a wave washer in the coupling nut ensures maintenance of interfacial seal between mating halves. Both the insert and main joint gasket are molded from resilient neoprene. This provides excellent moisture sealing at the gasket and superior electrical isolation of the contact in the insert. Both pins and sockets are machined form a copper alloy and are gold plated. This gold plating eliminates contact corrosion and offers an indefinite shelf life. Socket contacts for these series are a closed entry design. Breakaway style plug is available in PT-CE crimp. The PT-CE and SP-CE Series are intermateable and intermountable with all existing Miniature Cylindrical Series connectors except for the threaded coupling PC Series. cable connecting receptacle* box mounting receptacle straight plug Refer to pages 4-11 for insert arrangement availability. * This connector style is sometimes referred to as a cable connecting “plug.” It does, however, mate with a straight or 90 degree plug. jam nut receptacle breakaway twist pull plug 40 PT-CE, SP-CE Contact Specifications Maximum Millivolt Drop† Crimp Well Diameter Minimum Well Depth 20 7.5 55 .045 +.002 –.001 .359 16 13.0 49 .063 +.004 –.001 .234 “CE” open wire seal Service Rating Recommended Operating AC Voltage at Sea Level Sea Level I 600 1,500 500 375 200 II 1,000 2,300 750 500 200 Service Rating Test Voltage AC (RMS), 60 cps 50,000 ft. 70,000 110,000 ft. ft. † Silver plated wire per MIL-C-26482 PT-CE, and SP-CE Service Classes PT-CE and SP-CE Connectors are available in the three service classes listed below. “CE” Open wire sealing – environmental resistant, with a nut and grommet for moisture proofing individual wires. “CE” (SR) strain relief “CE” (SR)Strain relief clamp – environmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support. “CP” Translucent nylon boot for retaining customer applied potting compounds; held in place by a threaded ring. Breakaway style - see page 48. “CP” potting boot 41 BAYONET COUPLING WITH CRIMP CONTACTS Test Current PT-CE, SP-CE Contact Size PT00 CE SP00 CE wall mounting receptacle S R PT .120 ± .005 Dia. (.147 ± .005 Dia., size 24) (TP) SP .150 ± .005 Dia. R S 4 Holes (TP) TERMINATION ASSEMBLIES “CE” Open Wire Seal “CE” (SR) Strain Relief “CP” Potting Boot L L L K K A N A K G A H M M PT00CE-XX-XXX SP00CE-XX-XXX D N M PT00CE-XX-XXX (SR) SP00CE-XX-XXX (SR) PT00CP-XX-XXX SP00CP-XX-XXX To complete part number see how to order on page 49. ■ (MMC) located within .005 Dia. of (TP) Receptacle Front View Shell Size R (TP) S ±.016 Receptacle Side View A Dia. +.001 –.005 K +.025 –.010 M +.010 –.000 Class “CE” L Max. N Dia. Max. Class “CE” (SR) G Dia. H Max. L Max. Class “CP” D Dia. L Max. N Dia. Max. PT SP PT SP PT SP PT SP 6 .469 .641 .688 .953 .348 .493 .524 .431 .462 1.468 .440 – – – 8 .594 .734 .812 1.047 .473 .493 .524 .431 .462 1.468 .560 .125 .797 2.031 .327 1.683 .608 10 .719 .812 .938 1.125 .590 .493 .524 .431 .462 1.468 .685 .188 .859 2.031 .444 1.683 .734 12 .812 .938 1.031 1.250 .750 .493 .524 .431 .462 1.468 .813 .312 .984 2.031 .558 1.683 .858 14 .906 1.031 1.125 1.344 .875 .493 .524 .431 .462 1.468 .930 .375 1.109 2.031 .683 1.683 .984 16 .969 1.125 1.219 1.438 1.000 .493 .524 .431 .462 1.468 1.057 .500 1.172 2.156 .808 1.683 1.110 18 1.062 1.203 1.312 1.516 1.125 .493 .524 .431 .462 1.468 1.175 .625 1.422 2.156 .909 1.683 1.234 20 1.156 1.297 1.438 1.672 1.250 .650 .650 .556 .556 1.562 1.301 .625 1.422 2.266 1.034 1.750 1.360 22 1.250 1.375 1.562 1.750 1.375 .650 .650 .556 .556 1.562 1.428 .750 1.609 2.266 1.159 1.750 1.484 24 1.375 1.500 1.688 1.875 1.500 .683 .683 .589 .589 1.625 1.555 .800 1.703 2.328 1.284 1.782 1.610 All dimensions for reference only. 42 – – – PT01 CE cable connecting receptacle S S TERMINATION ASSEMBLIES “CE” Open Wire Seal “CE” (SR) Strain Relief “CP” Potting Boot L L A N A L K G A H D H K PT01CE-XX-XXX SP01CE-XX-XXX K PT01CE-XX-XXX (SR) SP01CE-XX-XXX (SR) PT01CP-XX-XXX Note:This connector style is sometimes referred to as a cable connecting “plug”. It does, however, mate with either a straight or 90 degree plug. To complete part number see how to order on page 49. Receptacle Front View Receptacle Side View Class “CE” Class “CE” (SR) Class “CP” Shell Size S ±.016 A Dia. +.001 –.005 K ±.016 L Max. N Dia. 6 .688 .348 .094 1.468 .440 – – – – – – 8 .812 .473 .094 1.468 .560 .125 .797 1.982 .327 1.702 .608 10 .938 .590 .094 1.468 .685 .188 .859 1.982 .444 1.702 .734 12 1.031 .750 .094 1.468 .813 .312 .984 1.982 .558 1.702 .858 14 1.125 .875 .094 1.468 .930 .375 1.109 1.982 .683 1.702 .984 16 1.219 1.000 .094 1.468 1.057 .500 1.172 2.114 .808 1.702 1.110 18 1.312 1.125 .094 1.468 1.175 .625 1.422 2.114 .909 1.702 1.234 20 1.438 1.250 .115 1.562 1.301 .625 1.422 2.207 1.034 1.796 1.360 22 1.562 1.375 .115 1.562 1.428 .750 1.609 2.207 1.159 1.796 1.484 24 1.688 1.500 .115 1.625 1.555 .800 1.703 2.219 1.284 1.827 1.610 G Dia. All dimensions for reference only. 43 H Dia. L Max. D Dia. Min. L Max. N Dia. Max. PT02 CE SP02 CE box mounting receptacle L S M R (TP) R (TP) S A HN D T Dia. 4 Holes K PT02CE-XX-XXX SP02CE-XX-XXX PT02CP-XX-XXX SP02CP-XX-XXX To complete part number see how to order on page 49. ■ (MMC) located within .005 of (TP) Receptacle Front View Receptacle Side View T Dia. ±.005 K +.025 –.010 Shell Size PT SP PT SP PT SP A Dia +.001 –.005 PT SP H Dia. Max. PT 8 .594 .734 .812 1.047 .120 .150 .473 .344 .312 .317 .493 10 .719 .812 .938 1.125 .120 .150 .590 .344 .312 .441 12 .812 .938 1.031 1.250 .120 .150 .750 .344 .312 14 .906 1.031 1.125 1.344 .120 .150 .875 .344 .312 16 .969 1.125 1.219 1.438 .120 .150 1.000 .344 18 1.062 1.203 1.312 1.516 .120 .150 1.125 20 1.156 1.297 1.438 1.672 .120 .150 22 1.250 1.375 1.562 1.750 .120 .150 24 1.375 1.500 1.688 1.875 .147 .150 S ±.016 R M +.010 –.000 SP L Max. PT SP N Dia. Max. .524 1.250 .431 .462 .449 .493 .524 1.250 .431 .462 .573 .566 .493 .524 1.250 .431 .462 .699 .683 .493 .524 1.250 .431 .462 .823 .312 .808 .493 .524 1.250 .431 .462 .949 .344 .312 .899 .493 .524 1.250 .431 .462 1.073 1.250 .406 .406 1.034 .650 .650 1.312 .556 .556 1.199 1.375 .406 .406 1.155 .650 .650 1.312 .556 .556 1.323 1.500 .436 .436 1.279 .683 .683 1.312 .589 .589 1.449 D All dimensions for reference only. 44 PT06 CE SP06 CE straight plug S TERMINATION ASSEMBLIES “CE” Open Wire Seal “CE” (SR) Strain Relief L “CP” Potting Boot L L N G N Z pin contacts Z¹ socket contacts D N Z pin contacts Z¹ socket contacts PT06CE-XX-XXX SP06CE-XX-XXX Z pin contacts Z¹ socket contacts PT06CE-XX-XXX (SR) SP06CE-XX-XXX (SR) PT06CP-XX-XXX SP06CP-XX-XXX To complete part number see how to order on page 49. Plug Front View Plug Side View Class “CE” Class “CE” (SR) Class “CP” Shell Size S Dia. Max. Z +.035 –.040 Z1 +.035 –.040 L Max. N Dia. 6 .609 .772 .631 1.457 .440 – – – – – – 8 .734 .772 .631 1.457 .560 .125 .797 2.019 .327 1.707 .608 10 .844 .772 .631 1.457 .685 .188 .859 2.019 .444 1.707 .734 12 1.016 .772 .631 1.457 .813 .312 .984 2.019 .558 1.707 .858 14 1.141 .772 .631 1.457 .930 .375 1.109 2.019 .683 1.707 .984 16 1.266 .772 .631 1.457 1.057 .500 1.172 2.144 .808 1.707 1.110 18 1.375 .772 .631 1.457 1.175 .625 1.422 2.144 .909 1.707 1.234 20 1.516 .710 .569 1.487 1.301 .625 1.422 2.175 1.034 1.707 1.360 22 1.641 .710 .569 1.487 1.428 .750 1.609 2.175 1.159 1.707 1.484 24 1.761 .710 .569 1.550 1.555 .800 1.703 2.237 1.284 1.832 1.610 G Dia. All dimensions for reference only. 45 H Max. L Max. D Dia. L Max. N Dia. Max. PT07 CE SP07 CE jam nut receptacle S H S TERMINATION ASSEMBLIES “CE” Open Wire Seal N M R GN J A P D N J A P PT07CE-XX-XXX SP07CE-XX-XXX L K K R A “CP” Potting Boot L M K R J “CE” (SR) Strain Relief L M P PT07CE-XX-XXX (SR) SP07CE-XX-XXX (SR) PT07CP-XX-XX SP07CP-XX-XXX To complete part number see how to order on page 49. All lockwire holes are .044 Dia. Min. Receptacle Front View H Hex. +.017 –.016 8 Receptacle Side View Panel Thickness S ±.016 A Dia. +.001 –.005 J Flat +.000 –.010 K ±.016 M ±.005 Min. .750 .938 .473 .530 .125 .696 .062 10 .875 1.062 .590 .655 .125 .696 .062 12 1.062 1.250 .750 .818 .125 .696 14 1.188 1.375 .875 .942 .125 16 1.312 1.500 1.000 1.066 .125 18 1.438 1.625 1.125 1.191 20 1.562 1.812 1.250 1.316 22 1.688 1.938 1.375 24 1.812 2.062 1.500 Shell Size Class “CE” Class “CE” (SR) Class “CP” D Dia. Min. Max. N Max. G Dia. L Max. N Max. .125 .827 .730 .125 1.297 .797 .327 .875 .608 .125 .827 .855 .188 1.297 .859 .444 .875 .734 .062 .125 .827 .980 .312 1.297 .984 .558 .875 .858 .696 .062 .125 .827 1.105 .375 1.297 1.109 .683 .875 .984 .696 .062 .125 .827 1.230 .500 1.422 1.172 .808 .875 1.110 .125 .696 .062 .125 .827 1.355 .625 1.422 1.422 .909 .875 1.234 .156 .884 .062 .250 .733 1.511 .625 1.328 1.422 1.034 .969 1.360 1.441 .156 .884 .062 .250 .733 1.636 .750 1.328 1.609 1.159 .969 1.484 1.566 .156 .917 .062 .250 .762 1.761 .800 1.422 1.703 1.284 .969 1.610 All dimensions for reference only. 46 L Max. N Dia. Max. L Max. PT08 CE SP08 CE 90 degree plug G TERMINATION ASSEMBLIES “CE” Open Wire Seal, “CE” (SR) Strain Relief “CP” Potting Boot 75 ° L L E A B PT08CE-XX-XXX SP08CE-XX-XXX PT08CE-XX-XXX (SR) SP08CE-XX-XXX (SR) PT08CP-XX-XXX SP08CP-XX-XXX H D K C To complete part number see how to order on page 49. All lockwire holes are .044 Dia. Min. Plug Front View Plug Side View Class “CE”, “CE” (SR) Shell Size G Dia. Max. B ±.031 C +.010 –.025 D ±.062 E +.047 –.025 Class “CP” L ±.057 A ±.025 H ±.015 K ±.015 L Max. 8 .796 .655 .169 .941 .339 1.986 .469 .312 .438 1.906 10 .921 .749 .170 1.191 .393 2.080 .547 .438 .562 2.031 12 1.046 .812 .264 1.191 .450 2.165 .625 .516 .688 2.093 14 1.171 .905 .310 1.254 .519 2.313 .734 .625 .781 2.203 16 1.297 1.030 .330 1.316 .583 2.515 .750 .656 .890 2.250 18 1.422 1.015 .444 1.562 .621 2.623 .781 .703 1.000 2.296 20 1.562 1.077 .510 1.625 .683 2.739 .859 .766 1.125 2.343 22 1.672 1.139 .515 1.719 .739 2.785 .906 .812 1.234 2.390 24 1.797 1.265 .656 1.751 .797 3.024 1.169 .918 1.374 2.624 All dimensions for reference only. 47 PT-CE Breakaway twist pull plug The PT-CE miniature breakaway connector has the following design features: • crimp front release, front removable contacts in “CE” nylon wafer retention system • 2 styles available: potted termination and environment style with a strain relief • instant decoupling of plug and receptacle with an axial pull on the lanyard when they are fully mated • intermateable with standard receptacles • operating voltage to 900 VAC (RMS) at sea level • quick positive bayonet coupling and 5 key/keyway polarization 6.000 ± .250 L .016 +.010 –.025 SOCKET INSERT J .328 +.010 –.025 PIN INSERT H B A LANYARD PULLED TAUT AGAINST A .200 ± .031 DIA. MANDREL Breakaway PT-CE with Crimp Contacts, Potted Termination 71-2512XX-( ) 72-2512XX-( ) 6.000 ± .250 L1 Shell Size A Dia. Max. B Max. F Dia. ±.016 H Dia. ±.016 J ±.010 L Max. L1 Max. Part Number* Part Number* 71-251209 71-339508 8 .875 .984 .125 .327 .353 1.937 2.937 71-251210 71-339510 10 1.125 1.125 .188 .444 .353 1.890 2.937 71-251211 71-251212 71-339512 71-339514 12 14 1.281 1.438 1.406 1.562 .312 .375 .558 .683 .353 .353 1.906 1.953 3.000 3.000 71-251213 71-339516 16 1.562 1.688 .500 .808 .353 2.000 3.187 71-251214 71-339518 18 1.718 1.844 .625 .909 .353 2.031 3.375 71-251215 71-251216 71-339520 71-339522 20 22 1.875 2.031 2.000 2.188 .625 .750 1.034 1.159 .415 .415 2.234 2.328 3.375 3.375 71-251217 71-339524 24 2.156 2.312 .800 1.284 .415 2.359 3.625 All dimensions for reference only. * See Finish information below to determine prefix 71 or 72 in part number. Drawing above shows standard lanyard length. .016 +.010 –.025 SOCKET INSERT J .328 +.010 –.025 PIN INSERT F Breakaway PT-CE with Crimp Contacts, Environmental with Strain Relief 71-3395XX-( ) 72-3395XX-( ) Order by Amphenol Propriety number as follows (example part number shown): 71 2512 50 32 P 1 2 3 4 5 1. Finish “71” designates corrosion resistant olive drab cadmium plate “72” designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and corrosion resistance, 500 hr. extended salt spray. 2. Connector Type Identification 2512XX designates PT-CE plug, crimp, potted termination style 3395XX designates PT-CE plug, crimp, environmental with strain relief style 3. Shell Size See part number columns in chart above for 2 digit number at end that correlates to the shell size. Example: ‘50’ correlates to shell size 18. 4. Insert Arrangement Number See insert availability for Miniature Breakaway connectors on page 6. The number following the hyphen is the insert arrangement number. 5. Contact Type/Alternate Insert Rotation P designates pin, S designates socket for normal positioning of inserts. When an alternate position of the insert is required to prevent cross-mating a different letter (other than P or S) is used. See page 7 for description of alternate positions; then convert to Amphenol proprietary coding by the chart at right to complete the part number. 48 Pin Contacts Amphenol Equates to Letter MS letter G PW I PX K PY M PZ Socket Contacts Amphenol Equates to Letter MS letter H SW J SX L SY N SZ PT-CE, SP-CE how to order PT-CE, SP-CE To more easily illustrate ordering procedure, part number PT00CE-20-41PW (SR) is shown as follows: 00 1 2 CE – 20 – 41 3 4 5 P W (SR) 6 7 8 See code below: 1. Connector Type “PT” designates standard electrically conductive olive drab cadmium plated bayonet lock connector with crimp contacts “SP” designates electrically non-conductive, hard anodic coated bayonet lock connector with large flange and mounting holes for back panel mounting, and crimp contacts. 2. Shell Style “00” designates wall mounting receptacle “01” designates cable connecting receptacle* “02” designates box mounting receptacle “06” designates straight plug “07” designates jam nut receptacle “08” designates 90° plug 3. Service Class “CE” designates environmental crimp “CP” designates potted type crimp Both of the above are Amphenol ® proprietary versions of the MIL-C26482, Series 1 crimp contact connector and offer 7 lbs. contact retention for size 20 contacts; 9 lbs for size 16 contacts. 4. Shell Size “20” designates shell size. Shell sizes 6 through 24 available. 5. Insert Arrangement Refer to pages 4-11 for insert availability. “20 – 41” designates insert arrangement. (The number following the hyphen is the number only that is used in the part number). 6. Contacts “P” designates pin contacts. “S” designates socket contacts. 7. Insert Rotation Refer to page 7. “W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from the “normal” position. No letter required for normal (no rotation) position. 8. “(SR)” designates strain relief clamp. Indicate optional finishes as follows: (003) olive drab cadmium plate (standard on “PT”) (005) anodic coating - Alumilite® (standard on “SP”) (014) olive drab cadmium plate over nickel (023) electroless nickel (024) olive drab zinc cobalt plating (025) non-conductive black zinc cobalt plating (027) conductive black zinc cobalt plating (424) electroless nickel finish with strain relief (466) olive drab zinc cobalt plating with strain relief (470) non-conductive black zinc cobalt plating with strain relief (476) conductive black zinc cobalt with strain relief * This connector style is sometimes referred to as a cable connecting “plug”. It does, however, mate with either a straight or 90 degree plug. For ordering Miniature Breakaway PT-CE Crimp connectors see page 48. 49 HOW TO ORDER PT-CE, SP-CE PT Amphenol ® PC threaded coupling and solder termination Amphenol® PC Series threaded coupling miniature cylindrical connectors incorporate solder contacts. The PC double stub threaded coupling system cannot be cross threaded, and is mechanically assisted while engaging and disengaging. Shell components are aluminum. Bright cadmium plating to QQ-P-416 with a clear chromate after-treatment provides a golden colored conductive finish. Single key/keyway polarization represents maximum simplicity in a design proven in millions of AN connectors. Both pins and sockets are machined from a copper alloy and are gold plated. This gold plating eliminates contact corrosion and offers an indefinite shelf life. Socket contacts for these series are a closed entry design. Both the insert and main joint gasket are molded from resilient neoprene. This provides excellent moisture sealing at the gasket and superior electrical insulation of the contacts in the insert. The PC is intermateable and intermountable within the PC threaded coupling series. wall mounting receptacle cable connecting receptacle* Refer to pages 4-11 for insert arrangement availability. box mounting receptacle * This connector style is sometimes referred to as a cable connecting “plug”. It does, however, mate with either a straight or 90 degree plug. PC-SE and PC-CE, which are threaded coupling and incorporate crimp contacts, are briefly covered on pages 62 and 63. It is necessary to contact Amphenol for ordering information on these types. straight plug jam nut receptacle 50 PC Contact Specifications Contact Size 20 16 Test Current Maximum Millivolt Drop† 7.5 13.0 Solder Well Diameter +.004 –.000 55 .046 50 .078 +.005 –.003 Solder Well Depth .125 +.031 –.000 “A” general duty .188 +.031 –.000 Service Rating Recommended Operating AC Voltage at Sea Level Sea Level I 600 1,500 500 375 200 II 1,000 2,300 750 500 200 Service Rating Test Voltage AC (RMS), 60 cps 50,000 ft. 70,000 110,000 ft. ft. “E” (SR) strain relief PC Service Classes PC connectors are available in the service classes listed below. Each class except the hermetic seal receptacle has one or more means of terminating or supporting a cable or wire bundle. “A” General duty; back shell is threaded for conduit attachment of MS3057 cable clamp. “E” MS / “E” open wire seal “A” (SR) General duty; with strain relief clamp for cable or wire bundle support. “C” Pressurized receptacle; less than 1 cu. in. per hour leakage at 30 psi over a temperature range of –65°F to +257°F in accordance with BSC-C1P specification. “E” Environment resistant; with nut and grommet for moisture proofing individual wires. “E” (SR) Environment resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support. “P” “P”, MS / “P” potting boot Translucent nylon boot for retaining customer applied potting compounds; held in place by a threaded ring. “P” (SR) Strain relief clamp suitable for retaining customer applied potting compounds, with provision for wire support. “W” Compressing clamp and neoprene gland for moisture proofing multi-conductor jacketed cables. Telescoping sleeves (MS 3420A) can be used to adapt to cables smaller than minimum close down. “H”* Hermetically sealed with compression glass inserts. “W” cable seal Refer to pages 57-60 for Hermetic Versions within the PC solder series. 51 THREADED COUPLING WITH SOLDER CONTACTS PC SERIES † Silver plated wire per MIL-C-26482 PC00 wall mounting receptacle S R .120 ± .005 Dia. 4 Holes L A M Q R S K Z TERMINATION ASSEMBLIES “A” General Duty/ “C” Pressurized L “A” (SR), “E” (SR), “P” (SR) Strain Relief L V N D “P” Potting Boot GDH “W” Cable Seal L L L N N N N D D C .375 MIN PC00A-XX-XXX PC00C-XX-XXX “E” Open Wire Seal PC00A-XX-XXX (SR) PC00E-XX-XXX (SR) PC00E-XX-XXX PC00P-XX-XXX PC00W-XX-XXX To complete part number see how to order on page 61. Receptacle Side View Receptacle Front View Class “A”, “C” Shell Size R ±.005 S ±.010 A Thread Class 2A 6 8 10 12 14 16 18 20 22 .469 .594 .719 .812 .906 .969 1.062 1.156 1.250 .688 .812 .938 1.031 1.125 1.219 1.312 1.438 1.562 .3750 DS .5000 DS .6250 DS .7500 DS .8750 DS 1.0000 DS 1.1250 DS 1.2500 DS 1.3750 DS K Max. .490 .490 .490 .490 .490 .490 .490 .584 .584 L Max. M +.000 –.010 Q Thread Class 2A Z Max. D Min. L Max. N Max. V Thread Class 2A .875 .875 .875 .875 .875 .875 .875 1.031 1.031 .416 .416 .416 .416 .416 .416 .416 .479 .479 .3125-32 NEF .4375-28 UNEF .5625-24 NEF .6875-24 NEF .8125-20 UNEF .9375-20 UNEF 1.0625-18 UNEF 1.1875-18 NEF 1.3125-18 NEF .466 .466 .466 .466 .466 .466 .466 .527 .527 .175 .297 .421 .546 .663 .787 .879 1.014 1.135 1.528 1.528 1.528 1.528 1.528 1.528 1.528 1.588 1.588 .462 .590 .717 .834 .970 1.088 1.216 1.332 1.460 .3750-32 NEF .5000-28 UNEF .6250-24 NEF .7500-20 UNEF .8750-20 UNEF 1.0000-20 UNEF 1.1875-18 NEF 1.1875-18 NEF 1.4375-18 NEF Class “A” (SR), “E” (SR), “P” (SR) Class “E” Class “P” Class “W” D Shell Size C Thread D Min. G Dia. H Max. L Max. N Max. L Max. N Max. D Min. L Max. N Max. Closed Free L Max. N Max. 6 8 10 12 14 16 18 20 22 – 6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 – .240 .302 .428 .552 .615 .740 .740 .928 – .125 .188 .312 .375 .500 .625 .625 .750 – .812 .875 1.000 1.125 1.188 1.438 1.438 1.719 – 1.922 1.922 1.922 1.922 2.047 2.078 2.344 2.344 – .550 .675 .803 .920 1.047 1.165 1.290 1.418 1.250 1.250 1.250 1.250 1.250 1.250 1.250 1.434 1.434 .440 .560 .685 .813 .930 1.057 1.175 1.301 1.430 .192 .317 .434 .548 .673 .798 .899 1.024 1.149 1.406 1.406 1.406 1.406 1.406 1.406 1.406 1.562 1.562 .484 .608 .734 .858 .984 1.110 1.234 1.360 1.484 – .168 .205 .338 .416 .550 .600 .635 .670 – .230 .312 .442 .539 .616 .672 .747 .846 – 1.680 1.680 1.823 2.015 2.231 2.461 2.835 2.999 – .547 .675 .812 .940 1.067 1.194 1.322 1.449 All dimensions for reference only. 52 PC01 cable connecting receptacle L S A Q Z TERMINATION ASSEMBLIES “A” General Duty “A” (SR), “E” (SR), “P” (SR) Strain Relief L L V N “E” Open Wire Seal D GDH “W” Cable Seal L L L N N N N D D C .375 MIN PC01A-XX-XXX “P” Potting Boot PC01A-XX-XXX (SR) PC01E-XX-XXX (SR) PC01P-XX-XXX (SR) PC01E-XX-XXX PC01P-XX-XXX PC01W-XX-XXX Note: This connector style is sometimes referred to as a cable connecting “plug”. It does, however, mate with either a straight or 90 degree plug. To complete part number see how to order on page 61. Recept. Front View Receptacle Side View Class “E” Shell Size S Max. A Thread Class 2A 6 8 10 12 14 16 18 20 22 .442 .570 .697 .814 .950 1.068 1.196 1.312 1.440 .3750 DS .5000 DS .6250 DS .7500 DS .8750 DS 1.0000 DS 1.1250 DS 1.2500 DS 1.3750 DS L Max. .875 .875 .875 .875 .875 .875 .875 1.031 1.031 Q Thread Class 2A .3125-32 NEF .4375-28 UNEF .5625-24 NEF .6875-24 NEF .8125-20 UNEF .9375-20 UNEF 1.0625-18 NEF 1.1875-18 NEF 1.3125-18 NEF Class “A” (SR), “E” (SR), “P” (SR) Shell Size 6 8 10 12 14 16 18 20 22 Z Max. D Min. L Max. N Max. V Thread Class 2A .924 .924 .924 .924 .924 .924 .924 1.081 1.081 .175 .297 .421 .546 .663 .787 .879 1.014 1.135 1.518 1.518 1.518 1.518 1.518 1.518 1.518 1.578 1.578 .462 .590 .717 .834 .970 1.088 1.216 1.332 1.460 .3750-32 NEF .5000-28 UNEF .6250-24 NEF .7500-20 UNEF .8750-20 UNEF 1.0000-20 UNEF 1.1875-18 NEF 1.1875-18 NEF 1.4375-18 NEF Class “E” Class “P” C Thread D Min. G Dia. H Max. L Max. N Max. L Max. N Max. D Min. L Max. N Max. – 6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 – .240 .302 .428 .552 .615 .740 .740 .928 – .125 .188 .312 .375 .500 .625 .625 .750 – .812 .875 1.000 1.125 1.188 1.438 1.438 1.719 – 1.922 1.922 1.922 1.922 2.047 2.078 2.344 2.344 – .550 .675 .803 .920 1.047 1.165 1.290 1.418 1.250 1.250 1.250 1.250 1.250 1.250 1.250 1.434 1.434 .440 .560 .685 .813 .930 1.057 1.175 1.301 1.430 .192 .317 .434 .548 .673 .798 .899 1.024 1.149 1.406 1.406 1.406 1.406 1.406 1.406 1.406 1.562 1.562 .484 .608 .734 .858 .984 1.110 1.234 1.360 1.484 All dimensions for reference only. 53 Class “W” D L Closed Free Max. – .168 .205 .338 .416 .550 .600 .635 .670 – .230 .312 .442 .539 .616 .672 .747 .846 – 1.680 1.680 1.823 2.015 2.231 2.461 2.835 2.999 N Max. – .547 .675 .812 .940 1.067 1.194 1.322 1.449 PC02 box mounting receptacle S L .120 ± .005 Dia. 4 Holes R A M N R S K Z PC02A-XX-XXX * PC02C-XX-XXX * PC02E-XX-XXX * PC02P-XX-XXX To complete part number see how to order on page 61. * The PC02 Box Mounting Receptacle is made only to complete a series and no provision is made for accessories or potting on the rear skirt. Receptacle Front View Receptacle Side View Shell Size R ±.005 S ±.010 A Thread Class 2A K +.020 –.010 L Max. M +.010 –.000 N Max. Z Max. 6 .469 .688 .3750 DS .469 .801 .406 .323 .466 8 .594 .812 .5000 DS .469 .801 .406 .449 .466 10 .719 .938 .6250 DS .469 .801 .406 .573 .466 12 .812 1.031 .7500 DS .469 .801 .406 .699 .466 14 .906 1.125 .8750 DS .469 .801 .406 .823 .466 16 .969 1.219 1.0000 DS .469 .801 .406 .949 .466 18 1.062 1.312 1.1250 DS .469 .801 .406 1.073 .466 20 1.156 1.438 1.2500 DS .562 .988 .469 1.199 .527 22 1.250 1.562 1.3750 DS .562 .988 .469 1.323 .527 All dimensions for reference only. 54 PC06 straight plug .333 MAX A S Z Q L TERMINATION ASSEMBLIES “A” General Duty L “A” (SR), “E” (SR), “P” (SR) Strain Relief V N D “E” Open Wire Seal L “P” Potting Boot GDH N “W” Cable Seal L L L N N N D D C .375 MIN PC06A-XX-XXX PC06A-XX-XXX (SR) PC06E-XX-XXX (SR) PC06P-XX-XXX (SR) PC06E-XX-XXX PC06P-XX-XXX PC06W-XX-XXX To complete part number see how to order on page 61. Plug Front View Plug Side View Class “A” Shell Size S Max. A Thread Class 2B 6 8 10 12 14 16 18 20 22 .604 .729 .854 .979 1.104 1.229 1.354 1.478 1.604 .3750 DS .5000 DS .6250 DS .7500 DS .8750 DS 1.0000 DS 1.1250 DS 1.2500 DS 1.3750 DS L Max. Q Thread Class 2A Z Max. D Min. L Max. N Max. V Thread Class 2A .875 .875 .875 .875 .875 .875 .875 1.031 1.031 .3125-32 NEF .4375-28 UNEF .5625-24 NEF .6875-24 NEF .8125-20 UNEF .9375-20 UNEF 1.0625-18 UNEF 1.1875-18 NEF 1.3125-18 NEF .627 .627 .627 .627 .627 .627 .627 .783 .783 .175 .297 .421 .546 .663 .787 .879 1.014 1.135 1.534 1.534 1.534 1.534 1.534 1.534 1.534 1.613 1.613 .462 .590 .717 .834 .972 1.088 1.216 1.332 1.460 .3750-32 NEF .5000-28 UNEF .6250-24 NEF .7500-20 UNEF .8750-20 UNEF 1.0000-20 UNEF 1.1875-18 NEF 1.1875-18 NEF 1.4375-18 NEF Class “A” (SR), “E” (SR), “P” (SR) Class “E” Class “P” Shell Size C Thread D Min. G Dia. H Max. L Max. N Max. L Max. N Max. D Min. L Max. N Max. 6 8 10 12 14 16 18 20 22 – 6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 – .240 .302 .428 .552 .615 .740 .740 .928 – .125 .188 .312 .375 .500 .625 .625 .750 – .812 .875 1.000 1.125 1.188 1.438 1.438 1.719 – 1.906 1.906 1.906 1.906 2.047 2.078 2.250 2.250 – .550 .675 .803 .920 1.047 1.165 1.290 1.418 1.250 1.250 1.250 1.250 1.250 1.250 1.250 1.434 1.434 .440 .560 .685 .813 .930 1.057 1.175 1.301 1.430 .192 .317 .434 .548 .673 .798 .899 1.024 1.149 1.406 1.406 1.406 1.406 1.406 1.406 1.406 1.562 1.562 .484 .608 .734 .858 .984 1.110 1.234 1.360 1.484 All dimensions for reference only 55 Class “W” D L Closed Free Max. – .168 .205 .338 .416 .550 .600 .635 .670 – .230 .312 .442 .539 .616 .672 .747 .846 – 1.680 1.680 1.823 2.015 2.231 2.461 2.835 2.999 N Max. – .547 .675 .812 .940 1.067 1.194 1.322 1.449 PC07 jam nut receptacle S H Z M P F F “A” General Duty/ “C” Pressurized Receptacle PC07A-XX-XXX PC07C-XX-XXX S A R K TERMINATION ASSEMBLIES “E” Open Wire Seal M “A” (SR), “E” (SR) Strain Relief M Z M N A R P “P” Potting Boot Z Z D GDH A R P L PC07E-XX-XXX A R L P N L PC07P-XX-XXX PC07A-XX-XXX (SR) PC07E-XX-XXX (SR) To complete part number see how to order on page 61. Shell Size F ±.010 H Hex ±.016 S ±.010 A Thread Class 2A K +.016 –.010 Receptacle Side View Class “A”, “C” P Panel Thickness M ±.010 Min. Max. 6 8 10 12 14 16 18 20 22 .286 .331 .375 .442 .486 .530 .573 .641 .685 .625 .750 .875 1.062 1.188 1.312 1.438 1.562 1.688 .812 .938 1.062 1.250 1.375 1.500 1.625 1.812 1.938 .3750 DS .5000 DS .6250 DS .7500 DS .8750 DS 1.0000 DS 1.1250 DS 1.2500 DS 1.3750 DS .125 .125 .125 .125 .125 .125 .125 .156 .156 .671 .671 .671 .671 .671 .671 .671 .797 .797 Receptacle Front View Class “E” Shell Size 6 8 10 12 14 16 18 20 22 L Max. .692 .692 .692 .692 .692 .692 .692 .754 .754 N Max. C Thread .605 .730 .855 .980 1.105 1.230 1.355 1.511 1.636 – 6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 .062 .062 .062 .062 .062 .062 .062 .062 .062 .125 .125 .125 .125 .125 .125 .125 .250 .250 R Thread Class 2A Z Max. .4375-28 UNEF .5625-24 NEF .6875-24 NEF .8750-20 UNEF 1.0000-20 UNEF 1.1250-18 NEF 1.2500-18 NEF 1.3750-18 NEF 1.5000-18 NEF .232 .232 .232 .232 .232 .232 .232 .262 .262 Class “A” (SR), “E” (SR) G H L Dia. Max. Max. P Min. D Min. Class “P” L Max. N Max. – .125 .188 .312 .375 .500 .625 .625 .750 – .240 .302 .428 .552 .651 .740 .740 .928 .192 .317 .434 .548 .673 .798 .899 1.024 1.149 .665 .665 .665 .665 .665 .665 .665 .790 .790 .484 .608 .734 .858 .984 1.110 1.234 1.360 1.484 – .812 .875 1.000 1.125 1.188 1.438 1.438 1.625 All dimensions for reference only 56 – 1.096 1.096 1.096 1.096 1.228 1.228 1.291 1.291 PC hermetic Three shell styles are available in the hermetic PC threaded series: • PCIH • PC02H • PC07H These hermetic connectors are available with solder cup or flat eyelet pin contacts. Socket contacts are available in some versions. Other design characteristics of the PC hermetic connector series are as follows: solder mounting receptacle Shell Size: 6 thru 22. (tin plated) Contact count: 2 through 65. Refer to pages 4 and 5 for insert availability for hermetics. Current: 5.0 amp, each #20 contact; 10 amp, each #16 contact; 17 amp, each #12 contact. Contacts: Fabricated from high nickel alloy and tin plated. Dielectric Withstanding Voltage (sea level): 1500 volts (RMS) 60 cps Service Rating I; 2300 volts (RMS) 60 cps Service Rating II. Compression glass inserts, permanently lettered. Helium Leakage: Less than 1.0 X 10-6 cc/sec. at 15 psi differential. box mounting receptacle Physical Shock: 100 G’s. Vibration: Exceeds MIL-E-5272 Procedure II. Thermal Shock: No deterioration or failure after 5 cycles at –55 °F to +257°F. Refer to pages 4-11 for insert arrangement availability. jam nut receptacle 57 PCIH hermetic solder mounting receptacle L A S W N Z .031 +.006 –.005 * PCIH-XX-XXX ** PCIY-XX-XXX To complete part number see how to order on page 61. * Solder cup pin contacts without interfacial seal. ** Solder cup pin contacts with interfacial seal Receptacle Front View Receptacle Side View Shell Size S Dia. Max. A Thread Class 2A L +.025 –.016 N Dia. +.000 –.005 W +.011 –.010 Z Max. 6 .511 .3750 DS .422 .438 .094 .387 8 .636 .5000 DS .422 .562 .094 .387 10 .761 .6250 DS .422 .672 .094 .387 12 .855 .7500 DS .422 .781 .094 .387 14 .980 .8750 DS .422 .906 .094 .387 16 1.105 1.0000 DS .422 1.031 .094 .387 18 1.229 1.1250 DS .422 1.156 .094 .387 20 1.323 1.2500 DS .422 1.250 .094 .387 22 1.439 1.3750 DS .422 1.375 .125 .418 All dimensions for reference only. 58 PC02H hermetic box mounting receptacle S R L A .120 ± .005 Dia. 4 Holes K N R S T Z * PC02H-XX-XXX ** PC02Y-XX-XXX To complete part number see how to order on page 61. * Solder cup pin contacts without interfacial seal. ** Solder cup pin contacts with interfacial seal Receptacle Front View Receptacle Side View K ±.016 L +.010 –.000 N Dia. +.000 –.005 T ±.010 Z Max. .344 Shell Size R ±.005 S ±.010 A Thread Class 2A 6 .469 .688 .3750 DS .047 .469 .438 .062 8 .594 .812 .5000 DS .047 .469 .562 .062 .344 10 .719 .938 .6250 DS .047 .469 .672 .062 .344 12 .812 1.031 .7500 DS .047 .469 .781 .062 .344 14 .906 1.125 .8750 DS .047 .469 .906 .062 .344 16 .969 1.219 1.0000 DS .047 .469 1.031 .062 .344 18 1.062 1.312 1.1250 DS .047 .469 1.156 .062 .344 20 1.156 1.438 1.2500 DS .047 .469 1.250 .062 .344 22 1.250 1.562 1.3750 DS .078 .469 1.375 .062 .377 All dimensions for reference only. 59 PC07H hermetic jam nut receptacle M S Z F P F S A R H K * PC07H-XX-XXX ** PC07Y-XX-XXX To complete part number see how to order on page 61. * Solder cup pin contacts without interfacial seal. ** Solder cup pin contacts with interfacial seal Receptacle Front View Shell Size F +.010 H Hex. ±.016 S +.010 Receptacle Side View A Thread Class 2A K +.000 –.016 M ±.020 Panel Thickness Min Max. R Thread Class 2A Z +.010 6 .286 .625 .812 .3750 DS .094 .671 .062 .125 .4375-28 UNEF .129 8 .331 .750 .938 .5000 DS .094 .671 .062 .125 .5625-24 NEF .129 10 .375 .875 1.062 .6250 DS .094 .671 .062 .125 .6875-24 NEF .129 12 .442 1.062 1.250 .7500 DS .094 .671 .062 .125 .8750-20 UNEF .129 14 .486 1.188 1.375 .8750 DS .094 .671 .062 .125 1.0000-20 UNEF .129 16 .530 1.312 1.500 1.0000 DS .094 .671 .062 .125 1.1250-18 NEF .129 18 .573 1.438 1.625 1.1250 DS .094 .671 .062 .125 1.2500-18 NEF .129 20 .641 1.562 1.812 1.2500 DS .125 .797 .062 .250 1.3750-18 NEF .034 22 .685 1.688 1.938 1.3750 DS .125 .797 .062 .250 1.5000-18 NEF .034 All dimensions for reference only. 60 PC how to order PC To more easily illustrate ordering procedure, part number PC00A-20-41PW (SR) is shown as follows: PC 00 A – 20 – 41 P W (SR) 1 2 3 6 7 8 4 5 See code below: * Hermetic connectors are supplied with tin plated shells. † This connector style is sometimes referred to as a cable connecting “plug”. It does, however, mate with either a straight or 90 degree plug. 61 HOW TO ORDER PC SERIES 1. Connector Type “PC” designates bright cadmium plated with clear chromate after treatment, threaded coupling connector with solder contacts 2. Shell Style “00” designates wall mounting receptacle “01” designates cable connecting receptacle† “02” designates box mounting receptacle “06” designates straight plug “07” designates jam nut receptacle designates solder-mount receptacle (hermetic only) “I ” 3. Service Class “A” designates general duty back shell “C” designates pressurized receptacle “E” designates environmental resisting open wire seal with grommet and nut “P” designates potted with potting boot “W” designates clamp assembly for moisture proofing, multijacketed cables “H” designates hermetic* seal (without interfacial seal) “Y” designates hermetic* seal (with interfacial seal) 4. Shell Size “20” designates shell size. Shell sizes 6 through 24 available. 5. Insert Arrangement Refer to pages 4-11 for insert availability. “20 – 41” designates insert arrangement. (The number following the hyphen is the number only that is used in the part number). 6. Contacts “P” designates pin contacts. “S” designates socket contacts. 7. Insert Rotation Refer to page 7. “W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from the “normal” position. No letter required for normal (no rotation) position. 8. “(SR)” designates strain relief clamp. Indicate optional finishes as follows: (001) bright cadmium (standard on “PC”) (003) olive drab cadmium plate (005) anodic coating - Alumilite® (011) chromate treated (Iridite 14-2) (014) olive drab cadmium plate over nickel (023) electroless nickel Amphenol ® PC-SE, PC-CE threaded coupling and crimp termination PC-SE. PC-CE Contact Specifications Contact Size Amphenol® PC-SE Series threaded coupling miniature cylindrical connectors incorporate crimp contacts in a spring tower retention system. Amphenol® PC-CE Series threaded coupling miniature cylindrical connectors incorporate crimp contacts in a nylon wafer retention system to maintain contact position. The PC double stub threaded coupling system cannot be cross threaded, and is mechanically assisted while engaging and disengaging. Test Current Maximum Millivolt Drop† Crimp Well Diameter Minimum Well Depth 20 7.5 55 .049 ±.001 .267 16 13.0 49 .067 ±.001 .236 12 23.0 42 .100 ±.002 .236 Service Rating Recommended Operating AC Voltage at Sea Level Sea Level 50,000 ft. I 600 1,500 500 375 200 II 1,000 2,300 750 500 200 Service Rating Test Voltage AC (RMS), 60 cps 70,000 110,000 ft. ft. † Silver plated wire per MIL-C-26482 PC-SE and PC-CE Service Classes Shell components are aluminum. Bright cadmium plating to QQ-P416 with a clear chromate after-treatment provides a golden colored conductive finish. Single key/keyway polarization represents maximum simplicity in a design proven in millions of AN connectors. Both pins and sockets are machined from a copper alloy and are gold plated. This gold plating eliminates contact corrosion and offers an indefinite shelf life. Socket contacts for these series are a closed entry design. Both the insert and main joint gasket are molded from resilient neoprene. This provides excellent moisture sealing at the gasket and superior electrical insulation of the contacts in the insert. The PC-SE and PC-CE are only intermateable and intermountable within the PC threaded coupling series. Shell style drawing pages are not shown in this catalog for the PC-SE and PC-CE styles. If connector drawings are needed please contact Amphenol for assistance. Shell styles are currently available in these series as follows: • PC00-SE, wall mounting receptacle • PC01-SE, cable connecting receptacle • PC02-SE, box mounting receptacle • PC06-SE, straight plug • PC08-SE, 90 degree plug • PC06-CE straight plug (will mate with PC-SE receptacles and PC solder receptacles) Please contact Amphenol for complete information, as there may be limitations in shell sizes within the PC-SE and PC-CE series. PC-SE and PC-CE connectors are available in the three service classes listed below. “SE” Open wire sealing - environmental resistant, with a nut and grommet for moisture proofing individual wires “SE” (SR)Strain relief clamp - environmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support “SP” Translucent nylon boot for retaining customer applied potting compounds; held in place by a threaded ring “SE” open wire seal “SE” (SR) strain relief Refer to pages 4-11 for insert arrangement availability. * This connector style is sometimes referred to as a cable connecting “plug”. It does, however, mate with either a straight or 90 degree plug. “SP” potting boot 62 PC-SE, PC-CE how to order PC-SE, PC-CE To more easily illustrate ordering procedure, part number PC-SE00A-20-41PW (SR) is shown as follows: PC-SE 1 00 SP – 20 – 41 P W (SR) 2 6 7 8 3 4 5 See code below: 63 THREADED COUPLING WITH CRIMP CONTACTS † This connector style is sometimes referred to as a cable connecting “plug”. It does, however, mate with either a straight or 90 degree plug. PC-SE, PC-CE 1. Connector Type “PC-SE” designates bright cadmium plated with clear chromate after treatment, threaded coupling connector with crimp contacts, incorporating a spring tower retention system “PC-CE” designates bright cadmium plated with clear chromate after treatment, threaded coupkling connector with crimp contacts, incorporating a nylon waftr retention system to maintain contact postion 2. Shell Styles PC-SE - consult Amphenol for availability. “00” designates wall mounting receptacle “01” designates cable connecting receptacle† “02” designates box mounting receptacle “06” designates straight plug “08” designates 90 degree plug 2. Shell Style PC-CE - consult Amphenol for availability. “06” designates straight plug 3. Service Class “SE” designates environmental crimp “SP” designates potted type crimp Both of the above are Amphenol ® proprietary versions of the MIL-C26482, Series 1 crimp contact connector and offer 7 lbs. contact retention for size 20 contacts; 9 lbs for size 16 contacts.) 4. Shell Size “20” designates shell size. Please contact Amphenol for complete information, as there may be limitations in shell sizes with the PC-SE and PC-CE series. 5. Insert Arrangement Refer to pages 4-11 for insert availability. “20 – 41” designates insert arrangement. (The number following the hyphen is the number only that is used in the part number). 6. Contacts “P” designates pin contacts. “S” designates socket contacts. 7. Insert Rotation Refer to page 7. “W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from the “normal” position. No letter required for normal (no rotation) position. 8. “(SR)” designates strain relief clamp. Indicate optional finishes as follows: (001) bright cadmium (standard on “PC”) (003) olive drab cadmium plate (005) anodic coating - Alumilite® (011) chromate treated (Iridite 14-2) (014) olive drab cadmium plate over nickel (023) electroless nickel PT, SP, PC accessories – sealing plugs, flange gaskets, potting boots SEALING PLUGS – FOR PT, SP, PC C B DIA .135 +.030 –.025 A DIA Contact Size 12 16 20 Amphenol® Part Number MS Number 10-405996-12 MS27488-12 10-405996-16 MS27488-16 10-405996-20 MS27488-20 A Dia. ±.010 B Dia. ±.005 C ±.010 Color Code .121 .083 .060 .171 .133 .090 .564 .564 .564 Yellow Blue Red How to Order: Order by 10- (Proprietary) or MS part number as shown in chart above. SEALING PLUG MS27488-XX 10-405996-XX MOUNTING FLANGE GASKETS – FOR PT, SP, PC .130 DIA SIZE 6 TO 22 .156 DIA SIZE 24 .160 DIA 10-150949 S F PT, PC 10-101949 R S T R MOUNTING FLANGE GASKET 10-101949-XX 10-150949-XX PT, SP, PC 10-101949 10-150949 SP 10-150949 Shell Size R ±.010 S ±.010 R ±.010 S ±.010 F +.016 –.000 T ±.008 6 8 10 12 14 16 18 20 22 24 .469 .594 .719 .813 .906 .969 1.063 1.156 1.250 1.375 .688 .812 .938 1.031 1.125 1.219 1.312 1.438 1.563 1.688 .641 .734 .812 .938 1.031 1.125 1.203 1.297 1.375 1.500 .953 1.047 1.125 1.250 1.344 1.438 1.516 1.672 1.750 1.875 .375 .500 .625 .750 .875 1.000 1.125 1.250 1.375 1.500 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 How to Order: For PT, PC: 10-101949-XX (complete order number with desired shell size). For SP: 10-150949-XX (complete order number with desired shell size). 75° POTTING BOOTS – FOR PT, SP, PC B E 15º REF D L 75° POTTING BOOT 10-101988-XX Shell Size B Max. D ±.015 E ±.015 L Max. 8 10 12 14 16 18 20 22 24 .433 .493 .552 .643 .658 .689 .750 .794 1.070 .312 .438 .516 .625 .656 .703 .766 .812 .918 .438 .562 .688 .781 .890 1.000 1.125 1.234 1.374 .766 .830 .861 .916 .936 .959 1.052 1.073 1.310 How to Order: 10-101988-XX (complete order number with desired shell size). All dimensions for reference only. 64 PT, SP, PC accessories – clamps CLASS “E” STRAIN RELIEF CLAMP – FOR PT, SP, PC L B D G C CLASS “E” STRAIN RELIEF CLAMP 10-101971-XX Shell Size B Max. C Thread Class 2B D Min. G Max. L Max. 8 10 12 14 16 18 20 22 24 .550 .675 .803 .920 1.047 1.165 1.291 1.418 1.533 6-32 NC 6-32 NC 6-32 NC 6-32 NC 6-32 NC 8-32 NC 8-32 NC 8-32 NC 8-32 NC .240 .302 .428 .552 .615 .740 .740 .928 .928 .812 .875 1.000 1.125 1.188 1.438 1.438 1.719 1.719 .930 .930 .930 .930 1.062 1.062 1.093 1.093 1.093 How to Order: 10-101971-XX X Add desired shell size Add desired finish suffix† “1” designates bright cadmium with clear chromate “3” designates olive drab cadmium “5” designates Alumilite® Not for use with jam nut style connectors. CLASSES “A” & “P” STRAIN RELIEF CLAMP – FOR PT, SP, PC B Max. C Thread Class 2B D Min. G Max. .540 .665 .793 .910 1.037 1.155 1.281 1.408 1.533 6-32 NC 6-32 NC 6-32 NC 6-32 NC 6-32 NC 8-32 NC 8-32 NC 8-32 NC 8-32 NC .240 .302 .428 .552 .614 .740 .740 .928 .938 .812 .875 1.000 1.125 1.188 1.438 1.438 1.719 1.719 L Shell Size B 8 10 12 14 16 18 20 22 24 D G C CLASSES “A” & “P” STRAIN RELIEF CLAMP 10-101980-XX B CLASS “A” CABLE CLAMP 97-3057-XXXX Shell Size Amphenol® Part Number A ±.031 B Max. C Dia. Min. V Thread 10 12 14 16 18/20 22/24 97-3057-1004 97-3057-1007 97-3057-1008 97-3057-1010 97-3057-1012 97-3057-1016 .795 .850 .920 .920 .927 1.015 .842 .995 1.120 1.216 1.403 1.683 .3125 .4375 .5625 .6250 .7500 .9375 .6250-24 .7500-20 .8750-20 1.0000-20 1.1875-18 1.4375-18 How to Order: Order by 97-3057-XXXX number listed above. Standard finish is olive drab zinc alloy. Consult Amphenol, Sidney, NY for alternate finishes. † Standard accessory finishes are “1” bright cadmium with clear chromate for PC types, “3” olive drab cadmium for PT and MS/PT types, “5” Alumilite® for SP types. Electroless nickel plating is also available on some items; consult Amphenol, Sidney, NY All dimensions for reference only. 65 ACCESSORIES & TOOLS CLASS “A” CABLE CLAMPS – FOR PT, SP, PC V Thread A .843 .843 .843 .843 .975 .975 1.007 1.007 1.007 How to Order: 10-101980-XX X Add desired shell size Add desired finish suffix† “1” designates bright cadmium with clear chromate “3” designates olive drab cadmium “5” designates Alumilite® Not for use with jam nut style connectors. C L +.010 –.020 PT, SP, MS/PT accessories – protection caps RECEPTACLE PROTECTION CAPS – FOR PT, SP, MS/PT C B L +.010 .140 –.005 DIA G X X X RECEPTACLE PROTECTION CAP FOR PT, SP, MS/PT CONNECTORS 10-101960-XXX MS3181-XXX (Wall Receptacle) 10-101961-XXX (Cable Connecting Receptacle) Shell Size B Dia. +.010 –.000 C Dia. +.010 –.000 G Dia. Max. L +.020 –.000 X Std. & MS RA, CA, NA X MS only RAL/CAL/NAL 6 8 10 12 14 16 18 20 22 24 .328 .454 .578 .703 .844 .969 1.094 1.219 1.343 1.453 .454 .578 .703 .891 1.016 1.141 1.266 1.391 1.516 1.614 .577 .706 .816 1.000 1.128 1.257 1.367 1.496 1.624 1.747 .563 .563 .563 .563 .563 .563 .563 .563 .563 .603 3.000 3.000 3.000 3.500 3.500 3.500 3.500 4.000 4.000 4.000 5.000 5.000 5.000 5.000 5.000 5.000 5.000 5.000 5.000 5.000 How to Order Proprietary Receptacle Caps: Wall Receptacle Caps: Cable Connecting Receptacle Caps: Jam Nut Receptacle Caps: 10-101964-XXX MS3181-XXX (Jam Nut Receptacle) 10-101960- XX X 10-101961- XX X 10-101964- XX X Add desired shell size Add desired finish suffix† “1” designates bright cadmium with clear chromate “3” designates olive drab cadmium “5” designates Alumilite® Proprietary caps are supplied with standard bead chains only (as shown in drawing at left). For other chain options, an MS version cap should be ordered. How to Order MS Version Receptacle Caps: Wall Receptacle Caps: MS3181- XX -CA for sash chain -CAL for long sash chain -RA for rope chain -RAL for long rope chain Jam Nut Recept. Caps: MS3181- XX -NA for sash chain -NAL for long sash chain Shell size MS versions are supplied with standard anodize finish only. For other finish options a proprietary cap should be ordered. PLUG PROTECTION CAPS – FOR PT, SP, MS/PT L N .140 +.010 –.005 DIA FOR SIZE 24 .125 +.010 –.005 DIA FOR SIZE 6-22 X PLUG PROTECTION CAP FOR PT, SP, MS/PT CONNECTORS MS3180-XXX 10-101957-XXX Shell Size N Dia. +.001 –.005 L Dia. +.025 –.015 X Std. & MS CA, RA X MS only CAL/RAL 6 8 10 12 14 16 18 20 22 24 .348 .473 .590 .750 .875 1.000 1.125 1.250 1.375 1.500 .532 .532 .532 .532 .532 .532 .532 .594 .594 .627 3.000 3.000 3.000 3.500 3.500 3.500 3.500 4.000 4.000 4.000 5.000 5.000 5.000 5.000 5.000 5.000 5.000 5.000 5.000 5.000 How to Order Proprietary Plug Caps: 10-101957-XX X Add desired shell size Add desired finish suffix† “1” designates bright cadmium with clear chromate “3” designates olive drab cadmium “5” designates Alumilite® Proprietary caps are supplied with standard bead chains only (as shown in drawing at left). For other chain options an MS version cap should be ordered. † Standard accessory finishes are “1” bright cadmium with clear chromate for PC types, “3” olive drab cadmium for PT and MS/PT types, “5” Alumilite® for SP types. Electroless nickel plating is also available on some items; consult Amphenol, Sidney, NY How to Order MS Version Plug Caps: MS3180- XX -CA for sash chain -CAL for long sash chain Shell size -RA for rope chain -RAL for long rope chain All dimensions for reference only. 66 MS versions are supplied with standard anodize finish only. For other finish options a proprietary cap should be ordered. PC accessories – protection caps RECEPTACLE PROTECTION CAPS – FOR PC C B A Shell Size L 6 8 10 12 14 16 18 20 22 +.010 .125 –.005 DIA G X X X RECEPTACLE PROTECTION CAP FOR PC CONNECTORS 10-101950-XXX (Wall Receptacle) 10-101951-XXX (Cable Connecting Receptacle) A Thread Class 2B .3750 DS .5000 DS .6250 DS .7500 DS .8750 DS 1.0000 DS 1.1250 DS 1.2500 DS 1.3750 DS B Dia. +.010 –.000 .328 .454 .578 .703 .844 .969 1.094 1.219 1.343 C Dia. +.010 –.000 .454 .578 .703 .891 1.016 1.141 1.266 1.391 1.516 G Max. L Max. X ±.250 .520 .648 .776 .902 1.030 1.157 1.284 1.412 1.507 .448 .448 .448 .448 .448 .448 .448 .448 .448 3.000 3.000 3.000 3.500 3.500 3.500 3.500 4.000 4.000 How to Order Proprietary Receptacle Caps for PC connectors only: Wall Receptacle Caps: 10-101950- XX X Cable Connecting Receptacle Caps: 10-101951- XX X Jam Nut Receptacle Caps: 10-101956- XX X 10-101956-XXX (Jam Nut Receptacle) Add desired shell size Add desired finish suffix† “1” designates bright cadmium with clear chromate (standard for PC) “3” designates olive drab cadmium “5” designates Alumilite® Caps for PC connectors are supplied only in proprietary versions with standard bead chains only (as shown in drawing at left). PLUG PROTECTION CAPS – FOR PC B L A G X PLUG PROTECTION CAP FOR PC CONNECTORS 10-101955-XXX Shell Size A Thread Class 2A B +.010 –.000 G Max. L Max. X ±.250 6 8 10 12 14 16 18 20 22 .3750 DS .5000 DS .6250 DS .7500 DS .8750 DS 1.0000 DS 1.250 DS 1.2500 DS 1.3750 DS .328 .454 .578 .703 .844 .969 1.094 1.219 1.343 .399 .526 .643 .770 .897 1.025 1.152 1.279 1.416 .557 .557 .557 .557 .557 .557 .557 .557 .557 3.000 3.000 3.000 3.500 3.500 3.500 3.500 4.000 4.000 How to Order Proprietary Plug Caps for PC only: 10-101955-XX X Add desired shell size Add desired finish suffix† “1” designates bright cadmium with clear chromate (standard for (PC) “3” designates olive drab cadmium “5” designates Alumilite® Caps for PC connectors are supplied only in proprietary versions with standard bead chains only (as shown in drawing at left). † Standard accessory finishes are “1” bright cadmium with clear chromate for PC types, “3” olive drab cadmium for PT and MS/PT types, “5” Alumilite® for SP types. Electroless nickel plating is also available on some items; consult Amphenol, Sidney, NY All dimensions for reference only. 67 PT, SP, PC accessories – dummy receptacles, “O” rings, plastic dust caps DUMMY RECEPTACLES – FOR PT, SP, MS/PT S S¹ R R¹ .150 DIA. +.004 –.002 4 HOLES R S R¹ S¹ M K N DUMMY RECEPTACLE FOR PT, SP, MS/PT CONNECTORS MS3115-XXX 10-150921-XXX Shell Size K ±.010 M +.030 –.000 N +.001 –.005 Proprietary Version R S ±.005 ±.010 8 10 12 14 16 18 20 22 24 .062 .062 .062 .062 .062 .062 .062 .062 .062 .462 .462 .462 .462 .462 .462 .556 .556 .589 .473 .590 .750 .875 1.000 1.125 1.250 1.375 1.500 .734 .812 .938 1.031 1.125 1.203 1.297 1.375 1.500 How to Order Proprietary Dummy Receptacles: 1.047 1.125 1.250 1.344 1.438 1.516 1.672 1.750 1.875 MS Version S1 R1 (TP) (TP) .594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 .828 .954 1.047 1.141 1.234 1.328 1.453 1.578 1.703 10-150921-XX X Add desired shell size Add desired finish suffix† “1” designates bright cadmium with clear chromate “3” designates olive drab cadmium “5” designates Alumilite® How to Order MS Version Dummy Receptacles: MS3115-XX X Add desired shell size Add desired finish suffix† -A designates Alumilite® -L designates electroless nickel -W designates olive drab cadmium NEOPRENE “O” RINGS – FOR PC T J Shell Size 6 8 10 12 14 16 18 20 22 NEOPRENE “O” RING FOR PC CONNECTORS 10-101937-XX Amphenol® Part Number J Dia. ±.010 T Dia. ±.003 10-101937-6 10-101937-8 10-101937-10 10-101937-12 10-101937-14 10-101937-16 10-101937-18 10-101937-20 10-101937-22 .172 .328 .406 .531 .641 .781 .906 .984 1.109 .031 .031 .031 .031 .031 .031 .031 .031 .031 How to order “O” rings: Order by 10- (Proprietary) only as shown in chart above. PLASTIC DUST CAPS FOR PT, SP FOR PC Shell Size Plug Plastic Dust Cap Receptacle Plastic Dust Cap Shell Size Plug Plastic Dust Cap Receptacle Plastic Dust Cap 6 8 10 12 14 16 18 20 22 24 10-70500-8 10-70506-12 10-70500-12 10-70506-16 10-70506-18 10-70506-20 10-70506-22 10-70506-24 10-70524-1 10-70506-28 10-70506-8S 10-70506-10 10-70506-12 10-70506-14 10-70506-16 10-70506-18 10-70506-20 10-79506-22 10-70506-24 10-70524-1 6 8 10 12 14 16 18 20 22 10-70576-6 10-70576-8 10-70500-8 10-70500-10 10-70500-12 10-70500-14 10-70576-18 10-70576-20 10-70576-22 10-70576-8 10-70500-8 10-70500-10 10-70500-12 10-70500-14 10-70500-16 10-70500-18 10-70500-20 10-70500-22 68 How to Order Plastic Dust Caps: To the basic order number add the dust cap size to match connector plug or receptacle shell size, as shown in the tables above. Example: 10-70506-12 would be the correct order number for a plastic dust cap for a PT00 receptacle, shell size 10. All dimensions for reference only. Application Tools “SE”, “CE” The following data includes information pertaining to the application tools for crimping, inserting and removing size 20, 16, and 12 contacts incorporated in Amphenol® Miniature Cylindrical Connectors. All crimping tools included are the “full cycling” type, and when used as specified by the manufacturer, provide reliable crimped wire to contact termination. Tool frames and turret heads are available from approved tool manufacturers; consult Amphenol, Sidney, NY for listings. Assembly instructions are available online at www.amphenol-aerospace.com See the following: L-786 for SE assembly instructions L-658 for CE assembly instructions L-555 for solder type instructions CRIMPING TOOLS FOR PT-SE, SP-SE, PC-SE, MS/PT-SE (MIL-C-26482, Series 1) Connectors FOR PT-CE, SP-CE, PC-CE (Proprietary) Connectors MS Tool Part Number MS Tool Part Number Contact Size Tool Frame Turret Head Contact Size Tool Frame Turret Head 20 M22520/1-01 M22520/1-02 20 M22520/1-01* * 16 M22520/1-01 M22520/1-02 16 M22520/1-01* * 12 M22520/1-01 M22520/1-02 * Use Daniels TH254 or equivalent INSERTION/REMOVAL TOOLS FOR PT-SE, SP-SE, PC-SE, MS/PT-SE (MIL-C-26482, Series 1) Connectors Insertion Tool Amphenol® Contact Contact Size Insertion Pliers Removal Tool Amphenol® Contact Insertion Tool MS Part Number Contact Insertion Tool Amphenol® Contact Removal Tool MS Part Number Contact Removal Tool M81969/19-07 20 11-8107-20 11-7401-20 M81969/17-03 11-7880-20 16 11-8107-16 11-7401-16 M81969/17-04 11-7880-16 M81969/19-08 12 – – M81969/17-05 – M81969/19-09 FOR PT-CE, SP-CE, PC-CE (Proprietary) Connectors Insertion/Removal Tool Contact Size Contact Insertion Pliers Contact Removal Tool Kit 20 11-6782 11-6900 16 11-6781 11-6900 69 Contacts - Power and Thermocouple Crimp for miniature cylindrical connectors The following tables provide part number information for crimp contacts used in Amphenol® Miniature Cylindrical Connectors. For additional information, consult Amphenol, Sidney, NY. CRIMP CONTACTS for MIL-C-26482, Series 1 (PT-SE, SP-SE) Connectors Pins Contact Size Accommodates Wire Size MS Number Sockets Amphenol® Proprietary Number Amphenol® Proprietary Number MS Number 20 20, 22 & 24 AWG M39029/31-240 10-314980-20P M39029/32-259 LP-597820-355 16 16, 18 & 20 AWG M39029/31-228 10-314980-16P M39029/32-247 10-257982-16F 12 12 & 14 AWG 20-16 16 AWG 10-330930-20F 10-807155-205 16-20 20 AWG 10-330932-16F 10-330933-16F 12-10 12 AWG 10-330938-12F 10-330939-12F M39029/31-235 10-807100-125 M39029/32-254 10-807103-125 CRIMP CONTACTS for PT-CE (Proprietary) Connectors Contact Size Accommodates Wire Size Pins Sockets Amphenol® Proprietary Number Amphenol® Proprietary Number 20 20, 22 & 24 AWG 10-189000-20F 10-597817-351 20-16 16 AWG 10-195962-20F 10-195963-20F 16 16, 18 & 20 AWG 10-189004-16F 10-189006-16F THERMOCOUPLE CONTACTS for Miniature Connectors Pins Proprietary Part Number Size 16 Crimp Termination Material Sockets Proprietary Part Number CE SE CE SE Chromel 10-252900-21P 10-330940-21P 10-252900-21S 10-330940-21S Alumel 10-252900-22P 10-330940-22P 10-252900-22S 10-330940-22S Iron Constantan 20 Crimp Termination 20 Solder Termination†† Chromel 10-252900-1P 10-330940-1P 10-252900-1S 10-330940-1S Alumel 10-252900-2P 10-330940-2P 10-252900-2S 10-330940-2S Iron 10-252900-3P 10-330940-3P 10-252900-3S 10-330940-3S Constantan 10-252900-4P 10-330940-4P 10-252900-4S 10-330940-4S Chromel 10-314910-1P 10-314910-1S Alumel 10-314910-2P 10-314910-2S Iron 10-314910-3P 10-314910-3S Constantan 10-314910-4P 10-314910-4S †† Listed are insertable/removable contacts; however, it is intended that contacts be terminated with solder. For additional thermocouple contact information, consult Amphenol, Sidney, NY. See L-776 for thermocouple contact termination instructions. These are online at www.amphenol-aerospace.com For PCB contacts for miniature connectors, see page 20. 70 Coaxial Contacts for miniature cylindrical connectors Amphenol® Miniature Connectors can incorporate shielded coax contacts. The Miniature family is built around MIL-C-26482 specifications, with Milapproved and proprietary styles offered. Normal operating voltage for Miniature cylindricals with power only contacts is up to 1,000 VAC (RMS) at sea level. Miniature Cylindricals offer these features for contact termination flexibility: • Several insert arrangements that can incorporate: • Size 8 & 12 Crimp Coax contacts for Crimp type • Size 8 & 12 Solder Coax contacts for Solder type • Wide selection of connector shell styles and sizes • Standard power contact options within the various connector styles include: solder type, crimp front release, crimp rear release • Coax contacts are designed to the same high performance standards as power contacts. Coax and power contacts may be intermixed with no degradation of connector reliability. • No mis-mating or cross-plugging with insert rotation and keyway polarization. GENERAL ORDERING INFORMATION Amphenol Miniature Cylindricals are normally supplied with a full complement of power contacts, separately packaged. Coax contacts are ordered by part number as referenced in the part number charts on the following pages of this catalog, and are substituted for the power contacts at the time of the cable or equipment assembly. If the application is for coax only, the connector may be ordered less contacts and no power contacts will be supplied. Installation instructions for the coax contacts for Miniature Connectors are provided in Amphenol documents as follows: L-633 for solder type; L-613 for SE type; L-660 for CE type. 71 Pin Crimp Coax Contact for use in Miniature Crimp SE Type Connectors Socket Crimp Coax Contact for use in Miniature Crimp SE Type Connectors CONTACTS HOW TO ORDER: A. Select the coax contacts designed for the cable being used from the applicable charts in this catalog for each Miniature type (solder, SE or CE). B. Select a connector insert from those shown on pages60-63 which will accommodate the quantity and size of coaxial contacts needed plus any power contacts required. Note: Size 8S and 12S contacts are used with connector inserts through shell size 18 only. For larger connector shell sizes, use size 8L contacts. C. Determine the Miniature Cylindrical type, shell style, finish, service class and insert rotation required for your application. D. Consult Amphenol, Sidney NY with the pertinent cable, contact, insert arrangement and connector style choices for complete connector part number. Solder Coax Contact for use in Miniature Solder Type Connectors Coaxial Contacts for miniature cylindrical connectors, cont. Amphenol® Coaxial Contacts designed for use in Miniature Cylindrical Connectors offer the same durability advantages and design benefits for reliable interconnection as the Amphenol coax contacts used in high performance D38999 connectors. A variety of military and commercial shielded cables are accommodated within the miniature cylindrical series. Amphenol supplies coax contacts for solder, crimp SE and crimp CE connector styles. Other features of the coax for miniature cylindricals include: • Miniature coax design has an outside nut within the assembly for fast, reliable assembly of contact to cable. • All types feature solder style inner contacts and crimp style outer contacts for reliable cable termination TYPICAL MINIATURE CRIMP COAX SOCKET CONTACT has crimp socket outer contact with a solder pin inner contact • Miniature coax crimp type contacts are designed for use in Miniature crimp series connectors • Miniature coax solder type contacts are designed for use in Miniature solder series connectors. These come pre-installed into the solder connector. TYPICAL ELECTRICAL PERFORMANCE Size 8 and 12 Coax Contacts Contact Resistance: Center @ 1 Amp, 170 millivolts max. voltage drop @ 25°C Outer @ 12 Amps, 150 millivolts max. voltage drop @ 25°C TYPICAL MINIATURE CRIMP COAX PIN CONTACT has crimp pin outer contact with a solder socket inner contact Dielectric Withstanding Voltage: Size 8: 1,300 VAC Rms @ sea level Size 12: 1,000 VAC Rms @ sea level Size 8 & 12: 250 VAC Rms @ 50,000 ft. Insulation Resistance 5,000 megohms minimum @ 25°C Typical VSWR for size 8 & 12 PT-SE Types II & III only: 1.2 + .12F (GHz) up to 10 GHz EXPLANATION OF TYPE CLASSIFICATIONS: PT-SE Type I is moisture seal design with internal O-ring. PT-SE Type II is 50 ohm impedance matched version. Contacts terminated to other than 50 ohm cables are therefore not matched. PT-SE Type III is 50 ohm contact, non-serviceable after assembly Solder and CE Types are non-impedance matched contacts. CONTACT FINISHES: Suffix Finish 1 2 3 4 5 E F H 0.00020 min. silver over copper flash 0.00005 min. gold (Knoop hardness 130-200) over silver 0.00010 min. gold (Knoop hardness 130-200) over silver 0.00010 min. gold (Knoop hardness 130-200) over copper 0.00005 min. gold (Knoop hardness 130-200) over nickel 0.00005 min. gold (Knoop hardness 90 max.) over copper 0.00005 min. gold (Knoop hardness 130-200) over copper 0.00010 min. gold (Knoop hardness 130-200) over copper 72 Coaxial Contacts for miniature cylindrical connectors, cont. solder (MIL-C-26482 Series 1 type) - application data MATING PIN DIA L H F G SOCKET L H F G MATING PIN DIA PIN NOTE: All contacts of the same size and the same inner and outer contact diameters (G & H) will mate with each other. SOLDER COAX CONTACTS For use in Miniature Solder Type Connectors: PT, SP, MS/PT and PC Styles Dimensional Data (See Drawings above) Contact Part Number Contact Size Cable Crimp Ferrule Tools L Length Ref. G Dia. H Dia. ±0.001 F Across Flats ±0.004 Pin Retainer Nut Wrench Socket MIL-T-22910/7-1 Tool Use with Die Part Number MIL-C-22520/5-01 Tool Use with Die Part Number MIL-C-22520/10-01 Tool Use with Die Part Number M22910/7-15 (B) M22520/5-05 (B) M22520/5-41 (B) M22520/10-07 (B) M22910/7-18 (B) M22520/5-45 (B) 11-8676-3 11-8676-2 Pin Socket 21-33020-2 21-33019-2 8S 0.040 ± 0.001 0.219 0.280 1.114 1.115 21-33020-1 21-33019-1 8L 0.040 ± 0.001 0.219 0.280 1.176 1.177 21-33020-3 21-33019-3 8S 0.040 ± 0.001 0.219 0.280 1.114 1.115 RG-142B/U, Times MI51115 21-33020-7* 21-33019-7* 8S 0.040 ± 0.001 0.219 0.280 1.114 1.115 M22910/7-16 (B) M22520/5-43 (B) RG-161/U, RG-174A/U, RG-179B/U, RG-187A/U, RG-188A/U, RG-316/U 21-33020-32* 21-33019-32* 12S 0.0300 ± 0.0005 0.140 0.172 1.092 1.093 M22910/7-12 (B) M22520/5-03 (A) M22520/5-08 (A) M22520/5-35 (B) M22520/10-05 (A) 11-8676-1 RG-178B/U 21-33020-4 21-33019-4* 8S 0.040 ± 0.001 0.219 0.280 1.114 1.115 M22910/7-11 (B) M22520/5-03 (B) M22520/5-33 (B) M22520/10-05 (B) 11-8676-2 12S 0.0300 ± 0.0005 0.140 0.172 1.092 1.093 M22910/7-11 (B) M22520/5-03 (B) M22520/5-33 (B) M22520/10-05 (B) 11-8676-1 RG-58C/U, RG-141A/U, RG-303/U RG-59B/U, RG-62A/U, RG-62B/U, RG-210/U RG-196A/U 21-33020-31† 21-33061-31*† 11-8676-2 RG-180B/U, RG-195A/U, Raychem 5022D1312-9 21-33020-5* 21-33019-5* 8S 0.040 ± 0.001 0.219 0.280 1.114 1.115 M22910/7-15 (B) M22520/5-05 (B) M22520/5-41 (B) M22520/10-07 (B) 11-8676-2 Raychem 5021D1331-9 21-33020-6* 21-33019-6* 8S 0.040 ± 0.001 0.219 0.280 1.114 1.115 M22910/7-15 (B) M22520/5-05 (B) M22520/5-41 (B) M22520/10-07 (B) 11-8676-2 Thermatics 2929-29 21-33020-33 21-33061-33 12S 0.0200 ± 0.0005 0.140 0.172 1.092 1.093 M22910/7-13 (B) M22520/5-37 (B) NOTE: Contacts can be ordered by part numbers given in chart NOTE: Size 8S and 12S contacts are used with connector inserts through shell size 18 only. For larger connector shell sizes, use size 8L contacts. CONTACT FINISH: For all contacts in this series feature 0.000050 minimum gold (Knoop hardness 130-200). 11-8676-1 * Consult Amphenol, Sidney NY for availability CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die closure. Commercial equivalents with the same die closure dimension may be used. † 21-33020-31 and 21-33061-31 only mate with each other 73 Coaxial Contacts for miniature cylindrical connectors, cont. crimp SE (MIL-C-26482 Series 1 type) - application data L F L G H G H MATING PIN DIA MATING PIN DIA SOCKET F PIN NOTE: All contacts of the same size and the same inner and outer contact diameters (G & H) will mate with each other. SE CRIMP COAX CONTACTS For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, MS/PT-SE and PC-SE Styles Contact Part Number Type Contact (See Size Cable Pg. 23) RG-55B/U, RG-142A/U, RG-142B/U, RG-223/U RG-58C/U, RG-141A/U, RG-303/U RG-59B/U, RG-62A/U, RG-62B/U, RG-210/U RG-140/U, RG-302/U (See Pg. 23) Pin Socket 21-33012-21 21-33012-25 21-33011-21 21-33011-25 8 8 I II 2 21-33038-21 21-33038-25* 21-33037-21 21-33037-25 8 8 I II 4 8 8 I II ** 21-33138-21( )* 21-33137-21( )* 21-33138-25( )* 21-33137-25( )* 21-33012-22 21-33012-26 21-33011-22 21-33011-26 8 8 I II 2 21-33038-22* 21-33038-26* 21-33037-22 21-33037-26* 8 8 I II 4 8 8 I II ** 21-33138-22( )* 21-33137-22( ) 21-33138-26( )* 21-33137-26( )* 21-33012-36 21-33011-36 8 II 2 21-33038-36* 21-33037-36 8 II 4 ** 21-33138-36( )* 21-33137-36( ) 8 II 21-33012-37* 21-33011-37* 8 II 2 21-33038-37* 21-33037-37* 8 II 4 8 II ** 8 8 I II 2 8 8 I II 4 8 8 I II ** 12 12 I II 2 12 12 I II 4 12 12 I II ** 21-33138-37( )* 21-33137-37( )* 21-33012-34 21-33012-30 21-33011-34 21-33011-30 21-33038-34 21-33037-34 21-33038-30 21-33037-30 RG-161/U, RG-174A/U, 21-33138-34( )* 21-33137-34( )* RG-179B/U, 21-33138-30( )* 21-33137-30( )* RG-187A/U, 21-33012-1 21-33011-1 RG-188A/U, 21-33012-4 21-33011-4 RG-316/U 21-33038-1* 21-33037-1* 21-33038-4 21-33037-4* 21-33138-1( )* 21-33137-1( ) 21-33138-4( )* 21-33137-4( )* 21-33012-35 21-33011-35 8 I 2 21-33038-35 21-33037-35 8 I 4 21-33138-35( )* 21-33137-35( )* RG-178B/U, RG-196A/U Finish on Mating Parts 8 I ** 21-33012-3* 21-33012-5 21-33011-3* 21-33011-5 12 12 I II 2 21-33038-3* 21-33038-5 21-33037-3* 21-33037-5* 12 12 I II 4 12 12 I II ** 21-33138-3( )* 21-33137-3( )* 21-33138-5( )* 21-33137-5( )* Dimensional Data (See Drawings above) Installation Tools Crimp Ferrule Tools L Length Ref. Retainer Nut Wrench G Dia. H Dia. ±0.001 F Across Flats ±0.004 0.0355 ±0.0010 0.218 0.280 1.156 1.144 M22910/7-17 (B) M22520/5-05 (A) 11-8369-5 11-7880-8 M22520/10-07 (A) 11-8676-2 M22520/5-19 (B) 11-8660-5 11-8154-1 0.0355 ±0.0010 0.218 0.280 1.156 1.144 M22910/7-15 (B) M22520/5-05 (B) 11-8369-4 11-7880-8 M22520/10-07 (B) 11-8676-2 M22520/5-41 (B) 11-8660-4 11-8154-1 0.0355 ±0.0010 0.218 0.280 1.156 1.144 M22910/7-18 (B) M22520/5-45 (B) 0.0355 ±0.0010 0.218 0.280 1.156 1.144 M22910/7-17 (B) 0.0355 ±0.0010 0.218 0.280 1.156 1.144 Pin Socket MIL-T-22910/7-1 MIL-C-22520/5-01 MIL-C-22520/10-0 Tool Tool Tool Use with Die Part Use with Die Part Use with Die Part Number Number Number 11-8676-3 Insertion Removal 11-8369-5 11-7880-8 11-8660-5 11-8154-1 M22520/5-05 (A) 11-8369-5 11-7880-8 M22520/10-07 (A) 11-8676-2 M22520/5-19 (B) 11-8660-5 11-8154-1 11-7880-8 11-8154-1 11-8676-2 M22520/5-03 (A) M22910/7-12 (B) M22520/5-08 (A) M22520/10-05 (A) M22520/5-35 (B) 11-8369-2 11-8660-2 0.0200 ±0.0005 0.128 0.172 1.092 1.072 11-8676-1 11-7880-12 11-8154-2 0.0355 ±0.0010 0.218 0.280 1.156 1.144 11-8676-2 11-7880-8 11-8154-1 M22910/7-11 (B) 0.0200 0.128 ± 0.0005 0.172 NOTE: Contacts can be ordered by part numbers given in chart ** See finish options for SE crimp Miniature contacts listed on page 70. Replace the parenthesis of the contact part number with the finish suffix number. However, you should consult Amphenol Sidney NY regarding the availability of all finish choices for each part 1.092 1.072 74 M22520/5-03 (B) M22520/10-05 (A) M22520/5-33 (B) 11-8369-1 11-8660-1 11-8676-1 11-7880-12 11-8154-2 * Consult Amphenol, Sidney NY for availability CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die closure. Commercial equivalents with the same die closure dimension may be used Coaxial Contacts for miniature cylindrical connectors, cont. crimp SE (MIL-C-26482 Series 1 type) - application data, cont. NOTE: All contacts of the same size and the same inner and outer contact diameters (G & H) will mate with each other. SE CRIMP COAX CONTACTS For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, MS/PT-SE and PC-SE Styles Contact Part Number Type Contact (See Size Cable Pg. 23) Finish on Mating Parts (See Pg. 23) Pin Socket 21-33012-24 21-33012-46* 21-33011-24 21-33011-46* 8 8 I II 2 21-33038-24 21-33038-46* 21-33037-24 21-33037-46* 8 8 I II 4 21-33138-24( )* 21-33137-24( )* 21-33138-46( )* 21-33137-46( )* 8 8 I II ** Raychem 9527E1118, 21-33106-40( ) 21-33105-40( ) RG-180B/U, RG-195A/U 12 III ** RG-180B/U, RG-195A/U RG-188 or RG-316 Double Braid Thermax 50C-25ADS-1 21-33012-6* 21-33012-7* 21-33011-6* 21-33011-7* 12 12 I II 2 21-33038-6* 21-33038-7* 21-33037-6* 21-33037-7* 12 12 I II 4 12 12 I II ** 21-33138-6( )* 21-33137-6( )* 21-33138-7( )* 21-33137-7( )* 21-33012-44 21-33011-44 8 II 2 21-33038-44* 21-33037-44* 8 II 4 21-33138-44( )* 21-33137-44( )* 8 II ** 8 I 2 8 I 4 8 I ** 8 8 I II 2 8 8 I II 4 8 8 I II ** 21-33012-31 21-33011-31 Raychem 21-33038-31 21-33037-31 9530D5314 21-33138-31( )* 21-33137-31( )* 8 I 2 8 I 4 8 I ** 21-33012-39 21-33011-39 Raychem 21-33038-39* 21-33037-39* 9527A1317 21-33138-39( )* 21-33137-39( )* 8 II 2 8 II 4 21-33012-28 21-33011-28 RG-195 21-33038-28* 21-33037-28* Double Braid 21-33138-28( )* 21-33137-28( )* 21-33012-23 21-33012-27 21-33011-23 21-33011-27 RG-122/U, 21-33038-23* 21-33037-23* Raychem 21-33038-27 21-33037-27 5022E5111 21-33138-23( )* 21-33137-23( )* 21-33138-27( )* 21-33137-27( )* 21-33012-40* 21-33011-40 Raychem 21-33038-40* 21-33037-40* 7527A1318 21-33138-40* 21-33137-40( )* Westrex 21-33012-43 21-33011-43 199-49-1, 21-33038-43 21-33037-43 Tensolite 30850/87T-1 21-33138-43( )* 21-33137-43( )* 8 II ** 8 II 2 8 II 4 8 II ** 12 II 2 12 II 4 12 II ** Dimensional Data (See Drawings pg. 25) H Dia. ±0.001 F Across Flats ±0.004 0.0355 0.218 ± 0.0010 0.280 G Dia. 0.0200 0.128 ± 0.0005 0.0200 0.128 ± 0.0005 Installation Tools L Length Ref. Pin Socket MIL-T-22910/7-1 MIL-C-22520/5-01 MIL-C-22520/10-0 Tool Tool Tool Use with Die Part Use with Die Part Use with Die Part Number Number Number 1.156 1.144 M22520/7-15 (B) 0.899 0.879 0.172 Crimp Ferrule Tools Retainer Nut Wrench Insertion Removal M22520/5-05 (B) 11-8369-4 11-7880-8 M22520/10-07 (B) 11-8676-2 M22520/5-41 (B) 11-8660-4 11-8154-1 Daniels GS200 Tool with G2P330 or M22520/31-01 Tool with Positioner M22520/31-02 1.092 1.072 11-8674- 11-7880-12 12 11-8154-2 11-8676-1 11-8369-2 11-7880-12 11-8660-2 11-8154-2 M22910/7-13 (B) M22520/5-37 (B) 0.0355 0.128 ± 0.0010 0.280 1.156 1.144 11-8676-2 11-8369-4 11-7880-8 11-8660-4 11-8154-1 0.0355 0.128 ± 0.0010 0.280 1.156 1.144 M22910/7-16 (B) M22520/5-43 (B) 11-8676-2 11-8369-4 11-7880-8 11-8660-4 11-8154-1 0.0355 0.218 ± 0.0010 0.280 1.156 1.144 M22520/7-15 (B) M22520/5-05 (B) 11-8369-4 11-7880-8 M22520/10-07 (B) 11-8676-2 M22520/5-41 (B) 11-8660-4 11-8154-1 0.0355 0.218 ± 0.0010 0.280 1.156 1.144 M22910/7-15 (B) M22520/5-05 (B) 11-8369-4 11-7880-8 M22520/10-07 (B) 11-8676-2 M22520/5-41 (B) 11-8660-4 11-8154-1 0.0355 0.218 ± 0.0010 0.280 M22520/5-03 (A) 11-8369-2 11-7880-8 1.156 1.144 M22910/7-12 (B) M22520/5-08 (A) M22520/10-05 (A) 11-8676-2 11-8660-2 11-8154-1 M22520/5-35 (B) 0.0200 0.128 ± 0.0005 0.172 1.092 1.072 M22910/7-11 (B) NOTE: Contacts can be ordered by part numbers given in chart ** See finish options for SE crimp Miniature contacts listed on page 70. Replace the parenthesis of the contact part number with the finish suffix number. However, you should consult Amphenol, Sidney, NY regarding the availability of all finish choices for each part number. M22520/5-03 (B) 11-8369-1 11-7880-12 M22520/10-05 (B) 11-8676-1 M22520/5-33 (B) 11-8660-1 11-8154-2 * Consult Amphenol, Sidney NY for availability CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die closure. Commercial equivalents with the same die closure dimension may be used. 75 Coaxial Contacts for miniature cylindrical connectors, cont. crimp CE (MIL-C-26482 Series 1 type) - application data MATING PIN DIA L MATING PIN DIA H F L G F H G SOCKET PIN NOTE: All contacts of the same size and the same inner and outer contact diameters (G & H) will mate with each other. CE CRIMP COAX CONTACTS For use in Miniature Crimp Type Connectors: PT-CE, SP-CE and PC-CE Styles Dimensional Data (See Drawings above) Contact Part Number Contact Size Cable Pin Socket Crimp Ferrule Tools L Length Ref. Installation Tools G Dia. ± 0.001 H Dia. ±0.001 F Across Flats ±0.004 Pin Socket MIL-T-22910/7-1 Tool Use with Die Part Number MIL-C-22520/5-01 Tool Use with Die Part Number MIL-C-22520/10-01 Tool Use with Die Part Number Retainer Nut Wrench Insertion Removal RG-58C/U, RG-141A/U, RG-303/U 21-33024-1 21-33023-1 8 0.040 0.219 0.280 1.239 1.285 M22910/7-15 (B) M22520/5-01 (B) M22520/5-41 (B) M22520/10-07 (B) 11-8676-2 11-8369-4 11-7310 11-8660-4 RG-178B/U, RG-196A/U 21-33024-2 21-33023-2 8 0.040 0.219 0.280 1.039 1.085 M22910/7-11 (B) M22520/5-03 (B) M22520/5-33 (B) M22520/10-05 (B) 11-8676-2 11-8369-1 11-7310 11-8660-1 NOTE: Contacts can be ordered by part numbers given in chart * Consult Amphenol, Sidney NY for availability CONTACT FINISH: for all contacts in this series feature 0.000050 minimum gold (Knoop hardness 130-200). CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die closure. Commercial equivalents with the same die closure dimension may be used. 76 Mounting Recommendations for miniature cylindrical connectors FLANGE MOUNTED CONNECTORS FLANGE MOUNTED CONNECTORS All flange mounting PC and PT connectors use standard MS mounting dimensions. They cannot be back panel mounted due to coupling clearance. The PTB (thru-bulkhead) type connector must also be back panel mounted on one side. Flange gaskets are available for both series, see page 64. R (TP) 4 HOLES .120 Dia. for Shell Sizes 6-22 PC & PT .147 Dia. for Size 24 PT .150 Dia. for SP only R (TP) D Dia. Shell Size PC & PT SP PC & PT SP 6 8 10 12 14 16 18 20 22 24 .469 .594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 .641 .734 .812 .938 1.031 1.125 1.203 1.297 1.375 – .323 .449 .573 .699 .823 .949 1.073 1.199 1.323 1.449 .439 .563 .680 .859 .984 1.108 1.233 1.358 1.483 – D Dia. R 2 R 2 The jam nut design has become very popular because it allows bench wiring of harness assemblies. The labor saving often offsets the added cost of the jam nut receptacle which is due to the self contained “O” ring and the extra nut. The PC series mounts in a round hole and can be pinned to prevent rotation. The PT series mounts in a “D” mounting hole and does not require pinning. B +.000 –.010 F ±.010 6 8 10 12 14 16 18 20 22 24 .447 .572 .697 .884 1.007 1.134 1.259 1.384 1.507 1.634 .420 .542 .669 .830 .955 1.084 1.208 1.333 1.459 1.575 .286 .331 .375 .442 .486 .530 .573 .641 .685 – JAM NUT MOUNTINGS F B R F P Panel Thickness Min. Max. .062 .062 .062 .062 .062 .062 .062 .062 .062 .062 .125 .125 .125 .125 .125 .125 .125 .250 .250 .250 CUT-OUT FOR PT ONLY PIN LOCATION FOR PC ONLY SECTION HERMETIC RECEPTACLES HERMETIC RECEPTACLE MOUNTINGS This series must be mounted in such a way as to preserve the hermetic seal provided by the glass insert. Mounting data for box and jam nut receptacles is given above. Cut-out required for solder mounting receptacles (N) is given below. Shell Size N Max. 6 8 10 12 14 16 18 20 22 .458 .582 .692 .801 .926 1.051 1.176 1.395 1.375 The finish of each of these hermetic receptacles is fused electro-deposited tin for easy solderability, and protected by a special lacquer for optimum shelf life. The lacquer will not interfere with any soldering operation. Low temperature solder should be used and the addition of a solder fillet at arrow points on drawing at right is recommended. Care must be taken that the operating temperature of the final assembly does not rise above the melt- N CUT-OUT 77 SOLDER RECEPTACLE JAM NUT BOX RECEPTACLE RECEPTACLE (See dimensions (See dimensions above) above) CONNECTOR MOUNTING RECOMMENDATIONS R +.010 –.000 SECTION CUT-OUT JAM NUT MOUNTINGS Shell Size No. 4 Screw for PC & PT No. 6 Screw for SP and for Size 24 PT Other Amphenol Miniature Cylindrical Connectors MIL-C-26482, Series 2 MIL-C-26482, Series 2 connectors are provided with the Amphenol®/Matrix® family of miniature cylindricals These are bayonet coupling type, and they feature crimp contacts that are rear insertable and rear releasable. There are six shell styles available and 34 insert arrangements. Military part numbers of the Matrix MIL-C-26482 family include the following: MS3470 wall mounting receptacle with narrow flange MS3472 wall mounting receptacle with wide flange MS3471 cable connecting receptacle MS3474 jam nut receptacle MS3476 straight plug MS3475 plug with RFI grounding fingers See catalog 12-071 for more information. Geophysical Miniature Cylindricals Designed for the Geophysical industry’s rugged environments, the Amphenol® Geophysical Series connector has custom features that provide reliability in extreme temperature and moisture conditions. The unique shell design provides stronger shells along with an anodized (nonconductive) finish for greater salt, corrosion and abrasion resistance. Coupling nuts are manufactured with round detent holes and are sold separately for greater customer flexibility. See product data sheet #146. RJ Field Bayonet MIL-C-26482 Cylindricals Amphenol PCD division provides MIL-C-26482 bayonet coupling cylindrical connectors with an RJ45 Ethernet interface*. These are designed for use in all levels of harsh environments from industrial to mil-aero applications providing IP67 protection from dust, fluids, vibration, shock and traction. The Amphenol® RJ Field allows the use of Ethernet Class D/Cat 5 and Cat 5e connections for 10 BaseT, 100 Base TX, or 1000 BaseT networks. It works with any standard RJ45 cordset with no extra tooling. It also offers reinforced EMI protection. For more information go online to www.rjfield.com or ask for the Field Series brochure. MIL-C-26482 Series 2 Geophysical Miniature Cylindricals * Other Field Series products are available through Amphenol PCD. These include RJF TV within MIL-DTL-38999 Series III threaded coupling connectors, and RJF 544 within ECTA push-pull plastic shell coupling. RJ Field Bayonet MIL-C-26482 Cylindricals 78