PTS06US14-19P-023

Signal Relays AXICOM P1 Relay V23026 n Directly triggerable with TTL standard modules as ALS, HCT & ACT line 13.5x7.85mm (0.531x0.309”) n Switching current 1 A n Bifurcated 1 form C (CO) contact n Immersion cleanable AXICOM n High sensitivity results in low nominal power Telecom-, Signal consumption, and RF Relays 65 to 130mW for monostable and 30 to 150mW for bistable (latching) n Initial surge withstand voltage P1 V23026 Relay 2.5kV (2/10μs) meets the Bellcore Requirement GR-1089 1.5kV (10/160μs) meets FCC Part 68 n Slim 108-98009 Rev. E P1_THTSMD Contact Data Typical applications Automotive CANtype bus, imobilizer, office equipment, measurement Number ofequipment, contacts and and control equipment, medical equipment, safety equipment Contact assembly Contact material Z 1 changeover contact Bifurcated contact Palladium nickel, gold-rhodium covered Approvals Limiting continuous current at max. ambient temperature UL 508 File No. E 111441 Technical data of approved types on request Maximum switching current Maximum swichting voltage Contact Data Contact arrangement 1 form C (CO) Maximum switching capacity Max. switching voltage 125VDC, 150VAC Rated current 1A Thermoelectric potential Limiting continuous current, 85°C 1A Initial contact resistance / measuring condition: 10 / 20 mV Breaking capacity max. see max. DC loadmA breaking capacity Contact material Palladium nickel, Electrical endurance at 12 V / 10 mA at 6 V / 100 mA gold-rhodium covered Contact style at 30 V / 1000 mA bifurcated contact Min. recommended contact load 10mA at 20mV Initial contact resistance ≤50mΩ at 10mA/20mV Mechanical Frequency of endurance operation without load 200 ops./s Operate/release time max. 2ms UL contact ratings Set/reset time max. 2ms Bounce time max. 3ms Electrical endurance at 12V/10mA typ. 50x106 operations at 6V/100mA typ. 10x106 operations at 30V/1000mA typ. 10x103 operations Contact ratings UL contact ratings 30VDC/1A 65VDC/0.46A 150VAC/0.46A Mechanical endurance typ. 109 operations Max. DC Load Breaking Capacity Max. DC load breaking capacity Coil Data 1A Magnetic system polarized Coil voltage range 3 to 24VDC 1A other coil voltages on request 125 Vdc Operative range, IEC 61810 see coil operative range 150 Vac Max. coil temperature 85°C Thermal resistance