REF2510R

Portable reference source industrial monitoring kit REF2510R The ReferenceMate portable reference source enables users in the field to easily verify sensor performance and the integrity of the cabling between the sensor and the online system. A built-in reference accelerometer assures that a 1 g test level is maintained for sensors weighing up to 250 grams. Frequency of operation (61.4 Hz for imperial measurements, 100 Hz to confirm sensor calibration value, and 159.2 Hz for metric measurements) and measurement type (peak/RMS) are push button selected. The REF2510R kit includes all the accessories needed for simple vibration data collection. LEDs notify the user when battery condition falls below operational levels or if the unit is overloaded. For calibration verification, reference test points are provided to verify the output of the internal sensor. Key features Included in the REF2510R kit: Frequency options Measurement types Frequency selection • • • • • • • Handheld shaker with protective boot 4x AA batteries Calibration sheet Belt clip Wrench Carrying case with foam insert 1/4-28 to 1/4-28 SF6 mounting stud Out of range indicator Battery indicator • Quickly and easily verify sensor operation and cable integrity in the field • User-selectable operating frequency and measurement type (peak or RMS) • Crossover frequencies for easy velocity verification • Selections retained after powering off • Rugged boot offers protection in harsh industrial environments Front panel controls to make selections at the push of a button • Up to 40 hours of battery life • Manufactured in an approved ISO 9001 facility Certifications Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies An Amphenol Company 99189 Rev.D 10/18 8435 Progress Drive Frederick, MD 21701 USA Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com buy.wilcoxon.com www.wilcoxon.com 1 Portable reference source industrial monitoring kit REF2510R SPECIFICATIONS Operating frequency1, ± 1% 61.4 Hz 100.0 Hz 159.2 Hz 1.0 g (9.81 m/s2) 1.0 g (9.81 m/s2) 1.0 g (9.81 m/s2) 1.0 ips (25.4 mm/s) 0.61 ips (15.6 mm/s) 0.39 ips (9.8 mm/s) 2.6 mils (65.9 µm) 0.98 mils (24.8 µm) 0.39 mils (9.8 µm) 1,280 320 240 Acceleration output1 Velocity output1 Displacement output 1 Operating cycles, 250 gram load2 Mounting thread 1/4-28 female Mounting torque, max 10 in-lb (112 N-cm) Distortion, 100-250 gram load ≤ 3% Load, min to max none to 8.8 oz (250 grams) Automatic switch off time approx. 90 ± 10 sec defeatable Temperature range: Operating Storage –10° to +55°C (+15° to +130°F) –40° to +85°C (–40° to +185°F) Ramp-up time ≤ 3 sec Internal battery 4x AA alkaline batteries DC power 6 VDC ± 5%, 1A, center positive Shaker dimensions diameter: 2.1 in. (5.33 cm), height: 9.25 in. (23.5 cm) Weight, with batteries 900 grams (32 oz) Case material 6061 aluminum, black hard-coated anodized IP rating IP54 Boot material thermoplastic rubber Notes: 1 User-selectable (peak or RMS).  2 Using supplied alkaline batteries. Optional accessories: REF001 universal mounting kit; REF002 metric mounting kit; REF003 universal AC adaptor; MD055 two-pole magnet; TAA01 triaxial accelerometer angled adaptor 1 4-28 UNF-2B 0.36 DEEP MOUNTING HOLE OOR ON/OFF FREQ PEAK HOLD FOR PEAK/RMS Ø2.10 [Ø53.3] BAT 61.4 0.31 [7.9] RMS Ø1.0 [Ø25.4] 100 159.2 1 4-28 UNF-2B 0.39 DEEP MOUNTING HOLE 9.06 [230.2] Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies An Amphenol Company 8435 Progress Drive Frederick, MD 21701 USA Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com 99189 Rev.D 10/18 buy.wilcoxon.com www.wilcoxon.com 2 DC JACK