RJE23-188-3116T

A B C D E G F H 13.35 0.526 1.20 0.047 PROPOSAL DRAWING DATE APP'D JUN18/15 Lawrence 1 8 0.315 15.20 ±0.10 0.598 ±0.004 PCB 3 KAPTON 2 0.079 CONNECTOR 1. MATERIALS: HOUSING: HIGH TEMPERATURE ENGINEERING THERMOPLASTIC, FLAMMABILITY RATING UL94 V-0, COLOUR: BLACK CONTACTS: PHOSPHOR BRONZE PLATING: SELECTIVE GOLD PLATING ON MATING SURFACES; 100u"[2.54 MICRONS]MIN. MATTE TIN ON SOLDER TAILS 50u"[1.27 MICRONS]MIN. NICKEL UNDERPLATING OVERALL SHIELD: STAINLESS STEEL WITH MATTE TIN PLATING 4 8.89 0.350 1 0.039 RECOMMENDED P.C.B LAYOUT COMPONENT SIDE OF BOARD TOLERANCE: +/- 0.05[0.002] 4 2. COPLANARITY SPECIFICATION: WITH THE MODULAR JACK SITTING ON A LEVEL SURFACE, THE MAXIMUM GAP BETWEEN THE LEVEL SURFACE AND ALL TERMINAL TAILS AND BOTH FITTING NAILS IS 0.10[.004]. +0.05 +0.002 0.76 - 0.02 0.030 - 0.001 1.27 0.050 R0 . 2 5 0.0 10 REF. 1 0.039 5.40 0.213 4.34 0.171 3.14 0.123 2 9.20 0.362 5 DESCRIPTION, ECN, EAR NO. A 1.27 0.050 SEE NOTE 2 16.08 0.633 3 REV 0.41 0.016 3 0.118 2 14.58 0.574 1 8.89 0.350 4.45 0.175 1.94 0.077 REVISIONS AMPHENOL PART NUMBER: RJE23-188-3X1X-X 1 0.039 16.60 0.654 GOLD PLATING OPTION 1= 6u" [0.15 MICRONS] GOLD PLATING 2= 15u" [0.38 MICRONS] GOLD PLATING 3= 30u" [0.76 MICRONS] GOLD PLATING 4= 50u" [1.27 MICRONS] GOLD PLATING PCB 5 15.10 0.594 MODIFIER CODE 5= WITH KAPTON TAPE 6= WITHOUT KAPTON TAPE PACKAGING OPTION BLANK= STANDARD (TRAY WITHOUT MYLAR) T= TAPE AND REEL DRAWN UNLESS SPECIFIED OTHERWISE PRIMARY UNITS SECONDARY 6 MILLIMETERS CHECKED INCHES M.E. APP'D REFERENCE IN PARENTHESES PANEL GENERAL TOLERANCES FOR MM RECOMMENDED PANEL CUTOUT THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP. A B C D JUN18/15 JUN18/15 DWG APPR. 0.38 ENG. REL. NO. 2 DECIMAL PLACES 0.25 REF. 3 DECIMAL PLACES 0.XXX ANGULAR DEGREES 1.5 Amphenol Canada Corp. www.amphenolcanada.com TITLE: RJ45 SINGLE PORT MODULAR JACK, TOP ENTRY, 8P8C, SURFACE MOUNT, SHIELD WITH TABS-RoHS COMPLIANT Q.A. APP'D 1 DECIMAL PLACE E Justin Feng L.Chan DWG. NO. DO NOT SCALE DRAWING THIRD ANGLE PROJECTION F 6 REV A P-RJE23-188-3X1X-X 03554 DWG SIZE: CODE ID NO. G C SCALE: 5:1 SHEET H 1 OF 1