RJSGE4886411

Modular Jack - RJSGE Series CAT5e, STACKED, PRESS FIT, FOUR PORT CONNECTOR WITH LEDs The RJSGE series of modular jacks is a unique 2x2, four port, press fit, Cat5e connector that meets Cat5e performance as per EIA-568-C.2 standards. It meets the 1G and 2.5G standards and supports a transmission rates up to 100MHz. Press fit contacts allows for an alternative to the more expensive SMT or THT soldering methods of connecting a RJ to a PCB. Standard, bi-color, and tricolored LEDs available on each port. Enhanced shielding options available for increased EMI performance. §§Supports 1G and 2.5G Ethernet Protocols §§Meets Cat5e performance on its own without outside TARGET MARKETS assistance §§Press fit contacts §§Multiple shield and LED options available §§RoHS compliant FEATURES BENEFITS §§Variety of LED options §§Customers can opt for the LED color of their choice §§Standard size §§Optimizes the PCB §§Accommodates industry standard plugs §§Can mate successfully with all types of standard plugs §§ Press fit contacts §§ Eliminates the need to solder the connector to a PCB §§Various shield options available §§Accommodates a wide range of EMI needs §§Meets Cat5e performance per EIA-568-C.2 §§Supports up to 2.5G Ethernet www.amphenol-icc.com Amphenol Information Communications and Commercial Products Modular Jack - RJSGE Series TECHNICAL INFORMATION MATERIAL APPROVALS AND CERTIFICATIONS §§ Insulator: High temperature engineering thermoplastic; §§ RoHS Complies with UL94V-0, Black §§ Contacts: Phosphor bronze hard temper with gold thickness options (6u”, 15u”, 30u”, 50u”) over 50u” min. nickel on contactmAting area. 100u” min. matte tin plating on soldering tail §§ Shield: Copper alloy, nickel plated with tin dipped tail or stainless steel with tin dipped tail §§ LED: Pure tin plating on LED tails ELECTRICAL PERFORMANCE §§ Contact Resistance: 20mΩ max. §§ Insulation Resistance: 500MΩ min. at 500V DC for 2 minutes max. §§ Current Rating: 1.5A §§ Voltage Rating: 125V AC §§ DWV: 1000V AC, 60Hz., 1 minute §§ LED Forward DC Current: 20mA typical §§ LED Forward Voltage: 1.9V max. @ 2mA (for single colors), 2.6V max. @ 20mA (for bicolors) §§ LED Reverse Voltage: 5V min. §§ LED Light Intensity: 0.4 to 1.5mcd @ 2mA (for single colors), 0.5mcd min. @ 2mA (for bicolors) §§ LED Wave Length: Yellow - 587 ± 7nm measured @ 20mA, Green - 565 ± 7nm measured @ 20mA, Red - 625 ± 5nm measured @ 20mA MECHANICAL PERFORMANCE §§ REACH §§ UL PACKAGING §§ Available in tray and tape and reel packaging TARGETMARKETS/APPLICATIONS 5G Wireless Telephones Modems Fax Machines Copiers/printers Security Systems Set Top Boxes Video Game Systems PCs Laptops Storage Servers Routers Switches Hubs Uninterruptible Power Supply (UPS) ATMs Vending Machines POS Terminals Industrial IoT Platforms Analysis equipment Mass Spectrometers §§ Insertion Force: 5lbs max. §§ Pull Retention Force: 20lbs min. §§ Durability: 750 mating and unmating cycles §§ Operating Temperature: -55°C to +85°C §§ Recommended Soldering Temperature: Wave soldering peaked at 260°C for 5 seconds max. www.amphenol-icc.com Disclaimer Please note that the above information is subject to change without notice. Modular Jack - RJSGE Series PART NUMBERS Description Part Numbers RJSGE Modular Jack Series Shield with no EMI tabs, without LEDs RJSGE-488-6401 RJSGE Modular Jack Series Shield with no EMI tabs, with LEDs RJSGE-488-6411 RJSGE Modular Jack Series Shield with no EMI tabs, with LEDs RJSGE-488-6441 RJSGE Modular Jack Series Shield with EMI tabs, without LEDs RJSGE-488-7401 RJSGE Modular Jack Series Shield with EMI tabs, without LEDs RJSGE-488-7411 RJSGE Modular Jack Series Shield with EMI tabs, without LEDs RJSGE-488-7441 RJSGE Modular Jack Series No shield with LEDs RJE48-188-0441 CMIORJSGE0418EA4 Product www.amphenol-icc.com Disclaimer Please note that the above information is subject to change without notice.