RL2005-27K-138-D1

NTC Thermistors Type RL20 Uncoated Disc With Radial Leads Description Point-matched disc thermistor with bare lead-wires. Features • Low cost solid state sensor • Wide operating temperature range: -58°F to 302°F (-50°C to 150°C) • Resistance tolerances down to ±2% • Suitable for PCB and probe mountings • High sensitivity to changes in temperature • Available in a wide range of material systems • Suitable for temperature measurement, control and compensation • Excellent mechanical strength Amphenol Advanced Sensors • Also available with epoxy coating • Available on tape and reel to EIA RS-468A for automatic insertion Type RL20 Specifications Type Number RL2004-16.4-59-M Ro@25°C Material Beta B δ τ Ω Systems 25/85 in mm (mW/K) (sec.) 25 D5.9 3096 .130 3.30 6.5 20 RL2007-32.8-59-M 50 D5.9 3096 .160 4.06 6.5 30 RL2003-62.4-73-K 100 D7.3 3468 .120 3.05 6.5 20 RL2004-93.6-73-K 150 D7.3 3468 .130 3.30 6.5 20 RL2004-89.1-85-K 150 D8.5 3772 .130 3.30 6.5 20 RL2006-125-73-K 200 D7.3 3468 .150 3.81 6.5 20 RL2006-119-85-K 200 D8.5 3772 .150 3.81 6.5 20 RL2007-156-73-K 250 D7.3 3468 .160 4.06 6.5 30 RL2008-187-73-K 300 D7.3 3468 .170 4.32 6.5 30 RL2008-178-85-K 300 D8.5 3772 .170 4.32 6.5 30 RL2003-289-95-K 500 D9.5 3965 .120 3.05 6.5 20 RL2005-434-95-K 750 D9.5 3965 .140 3.56 6.5 20 RL2006-578-95-K 1K D9.5 3965 .150 3.81 6.5 20 RL2004-582-97-K 1K D9.7A 3972 .130 3.30 6.5 20 RL2006-873-97-K 1.5K D9.7A 3972 .150 3.81 6.5 20 2K D9.7A 3972 .160 4.06 6.5 30 RL2005-1148-103-K 2K D10.3 4073 .140 3.56 6.5 20 RL2006-1600-103-K 2786 D10.3 4073 .150 3.81 6.5 20 RL2008-2010-103-K 3.5K D10.3 4073 .170 4.32 6.5 30 RL2005-2203-120-K 4K D12.0 4356 .140 3.56 6.5 20 RL2006-2753-120-K 5K D12.0 4356 .150 3.81 6.5 20 RL2007-1164-97-K Type Number Ro@25°C Material Beta B δ τ Ω Systems 25/85 in mm (mW/K) (sec.) RL2008-4131-120-K 7.5K D12.0 4356 .170 4.32 6.5 30 RL2004-4429-122-K 8K D12.2 4365 .130 3.30 6.5 20 RL2012-5506-120-K 10K D12.0 4356 .210 5.33 7.2 50 RL2005-5536-122-K 10K D12.2 4365 .140 3.56 6.5 20 RL2007-8304-122-K 15K D12.2 4365 .160 4.06 6.5 30 RL2010-11K-122-K 20K D12.2 4365 .190 4.83 7.0 35 RL2005-10.7K-140-K 20K D14.0 4615 .140 3.56 6.5 20 RL2003-13.2K-150-K 25K D15.0 4728 .120 3.05 6.5 20 RL2006-13.3K-140-K 25K D14.0 4615 .150 3.81 6.5 20 RL2007-16K-140-K 30K D14.0 4615 .160 4.06 6.5 30 RL2004-18.4-150-K 35K D15.0 4720 .130 3.30 6.5 20 RL2004-21.6K-138-K 40K D13.8 4561 .130 3.30 6.5 20 RL2005-27K-138-K 50K D13.8 4561 .140 3.56 6.5 20 RL2006-26.3K-150-K 50K D15.0 4720 .150 3.81 6.5 20 RL2004-26K-155-K 50K D15.5 4783 .130 3.30 6.5 20 RL2008-39.6K-150-K 70K D15.0 4220 .170 4.32 6.5 30 RL2007-40.6K-138-K 75K D13.8 4561 .160 4.06 6.5 30 RL2007-44.5K-155-K 85K D15.5 4783 .160 4.06 6.5 30 RL2010-54.1K-138-K 100K D13.8 4561 .190 4.83 7.0 35 RL2008-52.3K-155-K 100K D15.5 4783 .170 4.32 6.5 30 Amphenol Advanced Sensors 0.220 in max (5.6 mm) 0.156 in (4 mm) 1.5 in (38 mm) min 26 awg tinned copper B thickness refer to table Options • Other resistances and tolerances at other temperatures available. • Resistances tolerance codes: G = 2% – J = 5% – K = 10% – L = 15% – M = 20% • Alternative lead lengths, lead materials, insulations • The - “K” suffix is the same as the “DI” suffix in earlier catalogs. www.amphenol-sensors.com © 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice. Other company names and product names used in this document are the registered trademarks or trademarks of their respective owners. AAS-920-413A-04/2014