RL3006-16.2K-138-D1

NTC Thermistors Type RL30 Uncoated Disc With Radial Leads Description Point-matched disc thermistor with bare lead-wires. Features • Low cost solid state sensor • Wide operating temperature range: -58°F to 302°F (-50°C to 150°C) • Resistance tolerances down to ±2% • Suitable for PCB and probe mountings • High sensitivity to changes in temperature • Available in a wide range of material systems • Suitable for temperature measurement, control and compensation • Excellent mechanical strength Amphenol Advanced Sensors • Also available with epoxy coating. • Available on tape and reel to EIA RS-468A for automatic insertion Type RL30 Specifications Type Number RL3004-6.56-59-M RL3006-9.84-59-M Ro@25°C Material Beta B d t Ω Systems 25/85 in mm (mW/K) (sec.) 10 D5.9 3096 .130 3.30 7.0 35 15 D5.9 3096 .150 3.81 7.5 45 RL3008-13.1-59-M 20 D5.9 3096 .170 4.32 8.0 50 RL3004-31.2-73-K 75 D7.3 3468 .130 3.30 7.0 35 RL3005-44.5-85-K 75 D8.5 3772 .140 3.56 7.0 35 RL3006-59.4-85-K 100 D8.5 3772 .150 3.81 7.5 45 RL3004-144-95-K 250 D9.5 3965 .130 3.30 7.0 35 RL3006-231-95-K 400 D9.5 3965 .150 3.81 7.5 45 RL3004-291-97-K 500 D9.7A 3972 .130 3.30 7.0 35 RL3006-436-97-K 750 D9.7A 3972 .150 3.81 7.5 45 RL3004-459-103-K 800 D10.3 4073 .130 3.30 7.0 35 RL3005-574-103-K 1K D10.3 4073 .140 3.56 7.0 35 RL3007-861-103-K 1.5K D10.3 4073 .160 4.06 7.5 40 Type Number Ro@25°C Material Beta B d t W Systems 25/85 in mm (mW/K) (sec.) RL3005-1100-120-K 2K D12.0 4356 .140 3.56 7.0 35 RL3006-1377-120-K 2.5K D12.0 4356 .150 3.81 7.5 45 RL3008-1652-120-K 3K D12.0 4356 .170 4.32 8.0 50 RL3004-2214-122-K 4K D12.2 4365 .130 3.30 7.0 35 RL3005-2768-122-K 5K D12.2 4365 .140 3.56 7.0 35 RL3006-5340-140-K 10K D14.0 4615 .150 3.81 7.5 45 RL3008-8010-140-K 15K D14.0 4615 .170 4.32 8.0 50 RL3004-7900-150-K 15K D15.0 4728 .130 3.30 7.0 35 RL3004-10.8K-138-K 20K D13.8 4561 .130 3.30 7.0 35 RL3006-10.5K-150-K 20K D15.0 4728 .150 3.81 7.5 45 RL3005-13.1K-155-K 25K D15.5 4783 .140 3.56 7.0 35 RL3006-16.2K-138-K 30K D13.8 4561 .150 3.81 7.5 45 RL3006-15.7K-155-K 30K D15.5 4783 .150 3.81 7.5 45 Amphenol Advanced Sensors 0.320 in max (8.1 mm) 0.25 in (6.4 mm) 1.5 in (38 mm) min 24 awg tinned copper B thickness refer to table Options • Other resistances and tolerances at other temperatures available. • Resistance tolerance codes: G = 2% – J = 5% – K = 10% – L = 15% – M = 20% • Alternative lead lengths, lead materials, insulations • The - “K” suffix is the same as the “DI” suffix in earlier catalogs www.amphenol-sensors.com © 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice. Other company names and product names used in this document are the registered trademarks or trademarks of their respective owners. AAS-920-414A-04/2014