RT07123SNH03

REVISIONS 11/16 - 24 UNEF THREAD ECO B1 - DESCRIPTION RELEASED DRAWING DATE BY APPR JUN-27-2014 BEN TOMMY MASTER KEYWAY 33.0 ECO-MATE,RECEPTACLE, JAM NUT,SIZE 12,3POS,SOCKET. 31.8 TITLE: ø19.0 7/8 - 20 UNEF THREAD 31.8 DWG NO: PART NUMBER ø2 2 . 5 +0 . 2 KEY POS N RT07123SNH RT07123SNH03 W RT07123SWH RT07123SWH03 X RT07123SXH RT07123SXH03 Y RT07123SYH RT07123SYH03 Z RT07123SZH RT07123SZH03 B1 -40°C ~ 125°C REV: -40°C ~ 105°C 21.2+0.2 0 0 RT07123S*H* PANEL CUT OUT REFERENCE SH: 1 SEE PART NUMBER CHART DESCRIPTION PART NUMBER MATERIALS LIST UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: BEN ITEM Amphenol DATE JUN-27-2014 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. B NEXT ASS'Y: ECO-MATE,RECEPTACLE, JAM NUT SIZE 12,3POS,SOCKET. TYPE C- NONE DWG NO: REVISION RT07123S*H* SHEET B1 1 OF 1 1 QUANTITY OF: NOTES：(UNLESS OTHERWISE SPECIFICATION) 1. MATERIAL： SHELL：ZINC ALLOY，NICKEL PLATED. INSERT：THERMOPLASTIC，UL94 V-0. O-RING：NBR/SILICONE RUBBER. SEAL GASKET：NBR/SILICONE RUBBER. NUTS：AL ALLOY，NICKEL PLATED. 2. SPECIFICATIONS： 2.1 RATED CURRENT：13A (MAX). 2.2 RATED VOLTAGE：300V(AC/DC). 2.3 OPERATING TEMPERATURE：SEE CHART. 2.4 DIELECTRIC WITHSTANDING VOLTAGE：LESS THAN 2 MILLIAMPS CURRENT LEAKAGE@2000 VOLTS AC. 2.5 INSULATION RESISTANCE：5000 MEGOHMS MIN. 2.6 IP--CLASS：IP67. 2.7 MATING CYCLES DURABILITY：500 CYCLES MIN. 2.8 ROHS COMPLIANT. 3. SUITABLE CONTACTS ：16# CONTACTS. 4. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. REV ecomate® RM/RSSM/Aquarius™ - Contact Size 16 Options Crimp Contacts, Machined Part Number Male Female Crimp Contacts, Stamped & Formed AWG Wire Range (mm²) Plating Part Number Male Female AWG Wire Range (mm²) Plating Gold Flash MP14M23F MS14M23F 14 2.0-2.5 Gold Flash SP14M2F SS14M2F 14 2.0-2.5 MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 5µ” SP14M2G5 SS14M2G5 14 2.0-2.5 Gold 5µ” MP14M23G10 MS14M23G10 14 2.0-2.5 Gold 10µ” SP14M2G10 SS14M2G10 14 2.0-2.5 Gold 10µ” MP14M23G15 MS14M23G15 14 2.0-2.5 Gold 15µ” SP14M2G15 SS14M2G15 14 2.0-2.5 Gold 15µ” MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30µ” SP14M2G30 SS14M2G30 14 2.0-2.5 Gold 30µ” Gold Flash MP16M23F MS16M23F 18-16 0.75-1.5 Gold Flash SP16M2F SS16M2F 18-16 0.75-1.5 MP16M23G5 MS16M23G5 18-16 0.75-1.5 Gold 5µ” SP16M2G5 SS16M2G5 18-16 0.75-1.5 Gold 5µ” MP16M23G10 MS16M23G10 18-16 0.75-1.5 Gold 10µ” SP16M2G10 SS16M2G10 18-16 0.75-1.5 Gold 10µ” MP16M23G15 MS16M23G15 18-16 0.75-1.5 Gold 15µ” SP16M2G15 SS16M2G15 18-16 0.75-1.5 Gold 15µ” MP16M23G30 MS16M23G30 18-16 0.75-1.5 Gold 30µ” SP16M2G30 SS16M2G30 18-16 0.75-1.5 Gold 30µ” Gold Flash MP20M23F MS20M23F 22-20 0.34-0.50 Gold Flash SP20M2F SS20M2F 22-20 0.34-0.50 MP20M23G5 MS20M23G5 22-20 0.34-0.50 Gold 5µ” SP20M2G5 SS20M2G5 22-20 0.34-0.50 Gold 5µ” MP20M23G10 MS20M23G10 22-20 0.34-0.50 Gold 10µ” SP20M2G10 SS20M2G10 22-20 0.34-0.50 Gold 10µ” MP20M23G15 MS20M23G15 22-20 0.34-0.50 Gold 15µ” SP20M2G15 SS20M2G15 22-20 0.34-0.50 Gold 15µ” MP20M23G30 MS20M23G30 22-20 0.34-0.50 Gold 30µ” SP20M2G30 SS20M2G30 22-20 0.34-0.50 Gold 30µ” Gold Flash MP24M23F MS24M23F 26-24 0.14-0.25 Gold Flash SP24M2F SS24M2F 26-24 0.14-0.25 MP24M23G5 MS24M23G5 26-24 0.14-0.25 Gold 5µ” SP24M2G5 SS24M2G5 26-24 0.14-0.25 Gold 5µ” MP24M23G10 MS24M23G10 26-24 0.14-0.25 Gold 10µ” SP24M2G10 SS24M2G10 26-24 0.14-0.25 Gold 10µ” MP24M23G15 MS24M23G15 26-24 0.14-0.25 Gold 15µ” SP24M2G15 SS24M2G15 26-24 0.14-0.25 Gold 15µ” MP24M23G30 MS24M23G30 26-24 0.14-.025 Gold 30µ” SP24M2G30 SS24M2G30 26-24 0.14-0.25 Gold 30µ” Tooling, Machined Part Number QXRT16 Description Tooling, Stamped & Formed Part Number Contact Extraction Tool, #16 (Ø 1.6) Contact QXRT16 Description Contact Extraction Tool, #16 (Ø 1.6) Contact MFX-3959 Hand Crimp Tool for Machined Contacts MFX-3954 Hand Tool, Stamped & Formed Contact, Size 16, 20-14AWG MFX-3960 Pneumatic Crimp Tool for Machined Contact MFX-3957 Crimp Die, Stamped & Formed Contact Plating Options, All Symbol Misc Tooling, All Plating Part Number Description T Tin Plated (for Stamped & Formed Contacts) CA-4020-59 Sealing Plug, Size 16 & 20 S Silver Plated 5Um (for Machined Contacts) F Gold Plated G5 Gold Plated (Thickness 5µ”) G10 Gold Plated (Thickness 10µ”) Machined Stamped & Formed G15 Gold Plated (Thickness 15µ”) Bulk Package, 500 Pieces Reel, 3000 Pieces G30 Gold Plated (Thickness 30µ”) Standard Quantity Order Options Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021