RT07147SNH-K

REVISIONS REV ECO A1 - DESCRIPTION RELEASED DRAWING DATE BY APPR 9/1/2021 RO RO 33.0 19.3 1.8 TITLE: MASTER KEYWAY EcoMate RM KIT,RECEPTACLE,JAM NUT,SIZE 14,7 POS,SOCKET. Ø22.2 34.9 30.2 ILLUSTRATION: COMPLETE KIT DWG NO: 1 2 +0.2 +0.2 24.30 REV: A1 SH: PANEL CUT OUT REFERENCE 1 UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: CHECKED: ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: RO RO RO RO Amphenol DATE 9/1/2021 9/1/2021 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 9/1/2021 RECEPTACLE KIT,JAM NUT,7POS,FEMALE SHELL SIZE 14, MACHINED CONTACTS THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. B NEXT ASS'Y: 2 1 ITEM TYPE C- NONE DWG NO: REVISION RT07147SNH-K RT07147SNH-K SHEET A1 1 OF 1 1 SKT,SIZE16,16-18AWG,GOLD MS16M23F RECEPT JAM NUT, 7 SOCKET,KIT RT07147SNH-K DESCRIPTION PART NUMBER MATERIALS LIST 7 1 QUANTITY OF: NOTES：(UNLESS OTHERWISE SPECIFIED) 1. MATERIAL： SHELL：ZINC ALLOY，NICKEL PLATED. INSERT：THERMOPLASTIC，UL94 V-0. NUTS：AL ALLOY NICKEL PLATED. SEAL GASKET：NBR/SILICONE RUBBER. O-RING：NBR/SILICONE RUBBER. 2. SPECIFICATIONS： 2.1 RATED CURRENT：13A (MAX) . 2.2 RATED VOLTAGE：500V(AC/DC). 2.3 OPERATING TEMPERATURE：-40C TO +105C. 2.4 DIELECTRIC WITHSTANDING VOLTAGE：LESS THAN 2 MILLIAMPS CURRENT LEAKAGE@2000 VOLTS AC. 2.5 INSULATION RESISTANCE：5000 MEGOHMS MIN. 2.6 IP--CLASS：IP67 (IN MATED CONDITION). 2.7 MATING CYCLES DURABILITY：500 CYCLES MIN. 2.8 RoHS COMPLIANT. 3. SUITABLE CONTACTS：16# CONTACTS. 4. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. RT07147SNH-K Ø25.70 ecomate® RM/RSSM/Aquarius™ - Contact Size 16 Options Machined, Crimp Contacts Part Number Male Female Stamped & Formed , Crimp Contacts Contact Size (AWG) Wire Range (mm²) Plating Part Number Male Female Contact Size (AWG) Wire Range (mm²) Plating Gold Flash MP14M23F MS14M23F 14AWG 2.0-2.5mm² Gold Flash SP14M2F SS14M2F 14AWG 2.0-2.5mm² MP14M23G5 MS14M23G5 14AWG 2.0-2.5mm² Gold 5µ” SP14M2G5 SS14M2G5 14AWG 2.0-2.5mm² Gold 5µ” MP14M23G10 MS14M23G10 14AWG 2.0-2.5mm² Gold 10µ” SP14M2G10 SS14M2G10 14AWG 2.0-2.5mm² Gold 10µ” MP14M23G15 MS14M23G15 14AWG 2.0-2.5mm² Gold 15µ” SP14M2G15 SS14M2G15 14AWG 2.0-2.5mm² Gold 15µ” MP14M23G30 MS14M23G30 14AWG 2.0-2.5mm² Gold 30µ” SP14M2G30 SS14M2G30 14AWG 2.0-2.5mm² Gold 30µ” MP16M23F MS16M23F 18-16AWG 0.75-1.5mm² Gold Flash SP16M2F SS16M2F 18-16AWG 0.75-1.5mm² Gold Flash MP16M23G5 MS16M23G5 18-16AWG 0.75-1.5mm² Gold 5µ” SP16M2G5 SS16M2G5 18-16AWG 0.75-1.5mm² Gold 5µ” MP16M23G10 MS16M23G10 18-16AWG 0.75-1.5mm² Gold 10µ” SP16M2G10 SS16M2G10 18-16AWG 0.75-1.5mm² Gold 10µ” MP16M23G15 MS16M23G15 18-16AWG 0.75-1.5mm² Gold 15µ” SP16M2G15 SS16M2G15 18-16AWG 0.75-1.5mm² Gold 15µ” MP16M23G30 MS16M23G30 18-16AWG 0.75-1.5mm² Gold 30µ” SP16M2G30 SS16M2G30 18-16AWG 0.75-1.5mm² Gold 30µ” MP20M23F MS20M23F 22-20AWG 0.34-0.50mm² Gold Flash SP20M2F SS20M2F 22-20AWG 0.34-0.50mm² Gold Flash MP20M23G5 MS20M23G5 22-20AWG 0.34-0.50mm² Gold 5µ” SP20M2G5 SS20M2G5 22-20AWG 0.34-0.50mm² Gold 5µ” MP20M23G10 MS20M23G10 22-20AWG 0.34-0.50mm² Gold 10µ” SP20M2G10 SS20M2G10 22-20AWG 0.34-0.50mm² Gold 10µ” MP20M23G15 MS20M23G15 22-20AWG 0.34-0.50mm² Gold 15µ” SP20M2G15 SS20M2G15 22-20AWG 0.34-0.50mm² Gold 15µ” MP20M23G30 MS20M23G30 22-20AWG 0.34-0.50mm² Gold 30µ” SP20M2G30 SS20M2G30 22-20AWG 0.34-0.50mm² Gold 30µ” Gold Flash MP24M23F MS24M23F 26-24AWG 0.14-0.25mm² Gold Flash SP24M2F SS24M2F 26-24AWG 0.14-0.25mm² MP24M23G5 MS24M23G5 26-24AWG 0.14-0.25mm² Gold 5µ” SP24M2G5 SS24M2G5 26-24AWG 0.14-0.25mm² Gold 5µ” MP24M23G10 MS24M23G10 26-24AWG 0.14-0.25mm² Gold 10µ” SP24M2G10 SS24M2G10 26-24AWG 0.14-0.25mm² Gold 10µ” MP24M23G15 MS24M23G15 26-24AWG 0.14-0.25mm² Gold 15µ” SP24M2G15 SS24M2G15 26-24AWG 0.14-0.25mm² Gold 15µ” MP24M23G30 MS24M23G30 26-24AWG 0.14-.025mm² Gold 30µ” SP24M2G30 SS24M2G30 26-24AWG 0.14-.025mm² Gold 30µ” Machined, Tooling Part Number Stamped & Formed, Tooling Description Part Number Description Contact Extraction Tool, #16 (Ø 1.6) Contact QXRT16 Contact Extraction Tool, #16 (Ø 1.6) Contact MFX-3959 Hand Crimp Tool for Machined Contacts MFX-3954 Hand Tool, Stamped & Formed Contact, Size 16, 20-14AWG MFX-3960 Pneumatic Crimp Tool for Machined Contact MFX-3957 Crimp Die, Stamped & Formed Contact Plating Part Number Description T Tin Plated (for Stamped & Formed Contacts) CA-4020-59 Sealing Plug, Size 16 & 20 S Silver Plated 5Um (for Machined Contacts) F Gold Plated QXRT16 Plating Options, All Symbol Misc Tooling, All Standard Quantity Order Options G5 Gold Plated (Thickness 5µ”) Machined Bulk Package, 500 Pieces G10 Gold Plated (Thickness 10µ”) Stamped & Formed Reel, 3000 Pieces G15 Gold Plated (Thickness 15µ”) G30 Gold Plated (Thickness 30µ”) Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021