RT0W6106PNHEC03

REVISIONS REV ECO DESCRIPTION DATE BY APPR - RELEASED DRAWING July-04-2014 Ben Tommy - MODIFY THE INSERT LETTER LOCATION May-20-2016 Ben Tommy B3 - ADAPT TO CHANGE OF WIRE DIAMETER Dec-04-2019 Ronald Tommy TITLE: Ø20.0 B1 B2 1.8 2 Ø 41.1 Ref PART NUMBER KEY POS DWG NO: RT0W6106PNHEC RT0W6106PNHEC03 W RT0W6106PWHEC RT0W6106PWHEC03 X RT0W6106PXHEC RT0W6106PXHEC03 Y RT0W6106PYHEC RT0W6106PYHEC03 Z RT0W6106PZHEC RT0W6106PZHEC03 SH: N REV: OF: NOTES：(UNLESS OTHERWISE SPECIFIED) 1. MATERIAL： SHELL：ZINC ALLOY，NICKEL PLATED. INSERT：THERMOPLASTIC，UL94 V-0. END CAP：THERMOPLASTIC，UL94 V-0. COUPLING NUT：AL ALLOY，NICKEL PLATED. WAVE WASHER：STAINLESS STEEL. O-RING：NBR/SILICONE RUBBER. WIRE SEAL：SILICONE RUBBER. PLASTIC BUSHING：THERMOPLASTIC，UL94 V-0. 2. SPECIFICATIONS： 2.1 RATED CURRENT： 2.1.1 STAMPED CONTACT 5A (MAX). 2.1.2 MACHINED CONTACT 7.5A(MAX). 2.2 RATED VOLTAGE：250V（AC/DC）. 2.3 OPERATING TEMPERATURE：SEE CHART. 2.4 DIELECTRIC WITHSTANDING VOLTAGE：LESS THAN 2 MILLIAMPS CURRENT LEAKAGE@1500 VOLTS AC. 2.5 INSULATION RESISTANCE：5000 MEGOHMS MIN. 2.6 IP--CLASS：IP67 (MATED CONDITION). 2.7 MATING CYCLES DURABILITY：500 CYCLES(MIN). 2.8 RoHS COMPLIANT. 3. SUITABLE CONTACTS ：20# CONTACTS. 4. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. 5. CONTACT SIZE AND REAR SEAL WIRE RANGE： QUANTITY DESCRIPTION PART NUMBER DRAWN: CHECKED: X Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: ECO-MATE, PLUG, SIZE 10,6POS, PIN,END CAP, CUSTOMER: PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B3 B NEXT ASS'Y: NONE SHEET 1 OF 1