RTS014N19P03

REVISIONS REV ECO DATE BY APPR A1 -- RELEASED DRAWING Jul-03-2017 Nick Tommy A2 -- UPDATE DRAWING Mar-20-2018 White Tommy A3 -- UPDATE DRAWING Apr-10-2018 White Tommy DESCRIPTION .1 3 -Ø MASTER KEYWAY UNEF 13/16"-20-2A 23.2 28.8 Ø22.2 ECO-MATE, RECEPTACLE, FLANGE, SIZE 14, 19 POS, PIN 2.2 TITLE: RTS014*19Pxx XXXX 4 11.3 23.2 28.8 32.5 DWG NO: ting) un l Mo 23.0 e Pan RTS014*19Pxx ront or F +0.2 (F Ø21 0 23.0 Ø25.1 +0.2 0 (For R e N ar Pane l 4-Ø3.2+0.2 0 RTS014N19P Mountin g) SH: 1 OF: 1 PANEL CUT OUT REFERENCE ITEM DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY UNLESS OTHERWISE SPECIFIED SIGNATURES 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 DATE Amphenol DRAWN: CHECKED: White Tod Apr-10-2018 Apr-10-2018 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: 3) Note reference = 2.7 MATING CYCLES DURABILITY：500 CYCLES MIN. 2.8 RoHS COMPLIANT. 3. SUITABLE CONTACTS ：20# CONTACT. 4. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. RTS014N19P03 A3 PANEL EXTERNAL. -40°C ~ 125°C -40°C ~ 105°C REV: NOTES：(UNLESS OTHERWISE SPECIFIED) 1. MATERIAL： SHELL：THERMOPLASTIC，UL94 V-0. INSERT：THERMOPLASTIC，UL94 V-0. SEAL GASKET：NBR/SILICONE RUBBER. 2. SPECIFICATIONS： 2.1 RATED CURRENT：5A (MAX). 2.2 RATED VOLTAGE：250V(AC/DC). 2.3 OPERATING TEMPERATURE：SEE TABLE . 2.4 DIELECTRIC WITHSTANDING VOLTAGE：LESS THAN 2 MILLIAMPS CURRENT LEAKAGE@2000 VOLTS AC. 2.5 INSULATION RESISTANCE：5000 MEGOHMS MIN. 2.6 IP CLASS：IP67 AND IP69K IN THE MATED CONDITION, PART NUMBER KEY X APPROVAL: Tommy MATERIAL SPECIFICATIONS: Apr-10-2018 CUSTOMER: PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. B NEXT ASS'Y: ECO-MATE, RECEPTACLE, FLANGE, SIZE 14, 19 POS, PIN TYPE C- NONE DWG NO: REVISION RTS014*19Pxx SHEET A3 1 OF 1 ecomate® RM/RSSM/Aquarius™ - Contact Size 20 Options Crimp Contacts, Machined Part Number Male Female Crimp Contacts, Stamped & Formed AWG Wire Range (mm²) Plating Part Number Male Female AWG Wire Range (mm²) Plating Gold Flash MP20W23F MS20W23F 22-20 0.34-0.50 Gold Flash SP20W2F SS20W2F 22-20 0.34-0.50 MP20W23G5 MS20W23G5 22-20 0.34-0.50 Gold 5µ” SP20W2G5 SS20W2G5 22-20 0.34-0.50 Gold 5µ” MP20W23G10 MS20W23G10 22-20 0.34-0.50 Gold 10µ” SP20W2G10 SS20W2G10 22-20 0.34-0.50 Gold 10µ” MP20W23G15 MS20W23G15 22-20 0.34-0.50 Gold 15µ” SP20W2G15 SS20W2G15 22-20 0.34-0.50 Gold 15µ” MP20W23G30 MS20W23G30 22-20 0.34-0.50 Gold 30µ” SP20W2G30 SS20W2G30 22-20 0.34-0.50 Gold 30µ” Gold Flash MP24W23F MS24W23F 26-24 0.13-0.25 Gold Flash SP24W2F SS24W2F 26-24 0.14-0.25 MP24W23G5 MS24W23G5 26-24 0.13-0.25 Gold 5µ” SP24W2G5 SS24W2G5 26-24 0.14-0.25 Gold 5µ” MP24W23G10 MS24W23G10 26-24 0.13-0.25 Gold 10µ” SP24W2G10 SS24W2G10 26-24 0.14-0.25 Gold 10µ” MP24W23G15 MS24W23G15 26-24 0.13-0.25 Gold 15µ” SP24W2G15 SS24W2G15 26-24 0.14-0.25 Gold 15µ” MP24W23G30 MS24W23G30 26-24 0.13-0.25 Gold 30µ” SP24W2G30 SS24W2G30 26-24 0.14-0.25 Gold 30µ” MP28W23F MS28W23F 30-28 0.05-0.08 Gold Flash SP28W2F SS28W2F 30-28 0.05-0.08 Gold Flash MP28W23G5 MS28W23G5 30-28 0.05-0.08 Gold 5µ” SP28W2G5 SS28W2G5 30-28 0.05-0.08 Gold 5µ” MP28W23G10 MS28W23G10 30-28 0.05-0.08 Gold 10µ” SP28W2G10 SS28W2G10 30-28 0.05-0.08 Gold 10µ” MP28W23G15 MS28W23G15 30-28 0.05-0.08 Gold 15µ” SP28W2G15 SS28W2G15 30-28 0.05-0.08 Gold 15µ” MP28W23G30 MS28W23G30 30-28 0.05-0.08 Gold 30µ” SP28W2G30 SS28W2G30 30-28 0.05-0.08 Gold 30µ” Tooling, Machined Part Number QXRT20 Description Tooling, Stamped & Formed Part Number Contact Extraction Tool, #20 (Ø 1.0) Contact QXRT20 Description Contact Extraction Tool, #20 (Ø 1.0) Contact MFX-3959 Hand Crimp Tool for Machined Contacts MFX-3958 Hand Tool, Stamped & Formed Contact, Size 20, 20-28AWG MFX-3960 Pneumatic Crimp Tool for Machined Contact MFX-3957 Crimp Die for Stamped & Formed Contact Plating Options, All Symbol Misc Tooling, All Plating Part Number Description CA-4020-59 Sealing Plug, Size 16 & 20 T Tin Plated (for Stamped & Formed Contacts) S Silver Plated 5Um (for Machined Contacts) F Gold Plated Standard Quantity Order Options G5 Gold Plated (Thickness 5µ”) Machined Stamped & Formed G10 Gold Plated (Thickness 10µ”) Bulk Package, 500 Pieces Reel, 3000 Pieces G15 Gold Plated (Thickness 15µ”) G30 Gold Plated (Thickness 30µ”) Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021