RTS016N26SHEC03

REVISIONS REV ECO A1 - A2 - UPDATE NOTES A3 - UPDATE DRAWING A4 - UPDATE DRAWING Apr-10-2018 DESCRIPTION RELEASED DRAWING DATE BY APPR Mar-29-2017 Ben Tommy Jul-04-2017 Nick Tommy Mar-20-2018 White Tommy White Tommy MASTER KEYWAY 24.6 31.0 ECO-MATE, RECEPTACLE, END CAP,FLANGE, SIZE 16, 26 POS, SOCKET 27.8 TITLE: RTS016*26SHECxx XXXX Ø25.3 4-Ø3.2 SEALING PLUGS CAN BE PURCHASED SEPARATELY 24.6 35.0 Max 31.0 DWG NO: 24.6 ) nting t +0.2 (For 28.1 0 Fron RTS016*26SHECxx u l Mo Pane PART NUMBER Ø 24.6 KEY POS -40°C ~ 105°C Ø28.2 +0.2 0 N (For R -40°C ~ 125°C REV: RTS016N26SHEC RTS016N26SHEC03 ear P anel A4 Mou nting 4-Ø3.2+0.2 0 SH: NOTES：(UNLESS OTHERWISE SPECIFIED) 1. MATERIAL： SHELL：THERMOPLASTIC，UL94 V-0. INSERT：THERMOPLASTIC，UL94 V-0. COUPLING NUT：THERMOPLASTIC，UL94 V-0. O-RING：NBR OR SILICONE RUBBER. FIXED RUBBER: NBR. END CAP：THERMOPLASTIC，UL94 V-0. PLASTIC RING：THERMOPLASTIC，UL94 V-0. WIRE SEAL：SILICONE RUBBER. 2. SPECIFICATIONS： 2.1, RATED CURRENT： 2.1.1 STAMPED CONTACT 5A (MAX). 2.1.2 MACHINED CONTACT 7.5A(MAX). 2.2 RATED VOLTAGE：250V（AC/DC）. 2.3 OPERATING TEMPERATURE：SEE TABLE. 2.4 DIELECTRIC WITHSTANDING VOLTAGE：LESS THAN 2 MILLIAMPS CURRENT LEAKAGE@1500 VOLTS AC. 2.5 INSULATION RESISTANCE：5000 MEGOHMS MIN. 2.6 IP--CLASS：IP67 AND IP69K IN THE MATED CONDITION, ) 1 WIRE SEALS FULLY POPULATED. OF: 2.7 MATING CYCLES DURABILITY：500 CYCLES MIN. 2.8 ROHS COMPLIANT. 3. SUITABLE CONTACTS ：20# CONTACT. 4. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. 5. CONTACT SIZE AND REAR SEAL WIRE RANGE： 1 PANEL CUT OUT REFERENCE ITEM DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY UNLESS OTHERWISE SPECIFIED SIGNATURES 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 DATE Amphenol DRAWN: CHECKED: White Tod Apr-10-2018 Apr-10-2018 Sine Systems - www.amphenol-sine.com CONTACT SIZE MIN. INSUL O.D. MAX. INSUL O.D. WIRE RANGE 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: 3) Note reference = X APPROVAL: 20# 1.6mm 2.6mm 20-30AWG Tommy MATERIAL SPECIFICATIONS: Apr-10-2018 CUSTOMER: PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. B NEXT ASS'Y: ECO-MATE, RECEPTACLE, END CAP, FLANGE, SIZE 16, 26 POS, SOCKET TYPE C- NONE DWG NO: REVISION RTS016*26SHECxx SHEET 1 A4 OF 1 ecomate® RM/RSSM/Aquarius™ - Contact Size 20 Options Crimp Contacts, Machined Part Number Male Female Crimp Contacts, Stamped & Formed AWG Wire Range (mm²) Plating Part Number Male Female AWG Wire Range (mm²) Plating Gold Flash MP20W23F MS20W23F 22-20 0.34-0.50 Gold Flash SP20W2F SS20W2F 22-20 0.34-0.50 MP20W23G5 MS20W23G5 22-20 0.34-0.50 Gold 5µ” SP20W2G5 SS20W2G5 22-20 0.34-0.50 Gold 5µ” MP20W23G10 MS20W23G10 22-20 0.34-0.50 Gold 10µ” SP20W2G10 SS20W2G10 22-20 0.34-0.50 Gold 10µ” MP20W23G15 MS20W23G15 22-20 0.34-0.50 Gold 15µ” SP20W2G15 SS20W2G15 22-20 0.34-0.50 Gold 15µ” MP20W23G30 MS20W23G30 22-20 0.34-0.50 Gold 30µ” SP20W2G30 SS20W2G30 22-20 0.34-0.50 Gold 30µ” Gold Flash MP24W23F MS24W23F 26-24 0.13-0.25 Gold Flash SP24W2F SS24W2F 26-24 0.14-0.25 MP24W23G5 MS24W23G5 26-24 0.13-0.25 Gold 5µ” SP24W2G5 SS24W2G5 26-24 0.14-0.25 Gold 5µ” MP24W23G10 MS24W23G10 26-24 0.13-0.25 Gold 10µ” SP24W2G10 SS24W2G10 26-24 0.14-0.25 Gold 10µ” MP24W23G15 MS24W23G15 26-24 0.13-0.25 Gold 15µ” SP24W2G15 SS24W2G15 26-24 0.14-0.25 Gold 15µ” MP24W23G30 MS24W23G30 26-24 0.13-0.25 Gold 30µ” SP24W2G30 SS24W2G30 26-24 0.14-0.25 Gold 30µ” MP28W23F MS28W23F 30-28 0.05-0.08 Gold Flash SP28W2F SS28W2F 30-28 0.05-0.08 Gold Flash MP28W23G5 MS28W23G5 30-28 0.05-0.08 Gold 5µ” SP28W2G5 SS28W2G5 30-28 0.05-0.08 Gold 5µ” MP28W23G10 MS28W23G10 30-28 0.05-0.08 Gold 10µ” SP28W2G10 SS28W2G10 30-28 0.05-0.08 Gold 10µ” MP28W23G15 MS28W23G15 30-28 0.05-0.08 Gold 15µ” SP28W2G15 SS28W2G15 30-28 0.05-0.08 Gold 15µ” MP28W23G30 MS28W23G30 30-28 0.05-0.08 Gold 30µ” SP28W2G30 SS28W2G30 30-28 0.05-0.08 Gold 30µ” Tooling, Machined Part Number QXRT20 Description Tooling, Stamped & Formed Part Number Contact Extraction Tool, #20 (Ø 1.0) Contact QXRT20 Description Contact Extraction Tool, #20 (Ø 1.0) Contact MFX-3959 Hand Crimp Tool for Machined Contacts MFX-3958 Hand Tool, Stamped & Formed Contact, Size 20, 20-28AWG MFX-3960 Pneumatic Crimp Tool for Machined Contact MFX-3957 Crimp Die for Stamped & Formed Contact Plating Options, All Symbol Misc Tooling, All Plating Part Number Description CA-4020-59 Sealing Plug, Size 16 & 20 T Tin Plated (for Stamped & Formed Contacts) S Silver Plated 5Um (for Machined Contacts) F Gold Plated Standard Quantity Order Options G5 Gold Plated (Thickness 5µ”) Machined Stamped & Formed G10 Gold Plated (Thickness 10µ”) Bulk Package, 500 Pieces Reel, 3000 Pieces G15 Gold Plated (Thickness 15µ”) G30 Gold Plated (Thickness 30µ”) Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021