RTS1BS14N19SHEC03

REVISIONS REV ECO DESCRIPTION A1 33.5 REF MASTER KEYWAY RELEASED DRAWING DATE BY APPR Mar-15-2021 Blink Tommy Ø30.0 11.3 28.8 Ø22.2 TITLE: 2.2 28.8 SEALING PLUGS CAN BE PURCHASED SEPARATELY DW G NO: PART NUMBER KEY -40°C ~ 105°C N RTS1BS14N19SHEC RTS1BS14N19SHEC03 SH: OF: QUANTITY PART NUMBER MIN. INSUL O.D. MAX. INSUL O.D. WIRE RANGE 20# Ø1.4mm Ø2.1mm 20 - 30AWG DESCRIPTION DR AW N: CH EC K E D: X CONTACT SIZE -40°C ~ 125°C REV: NOTES ： (UNLESS OTHERWISE SPECIFIED) 1. MATERIAL： 1.1 SHELL： THERMOPLASTIC ， UL94 V-0. 1.2 INSERT： THERMOPLASTIC， UL94 V-0. 1.3 O-RING： NBR/SILICONE RUBBER. 1.4 SEAL GASKET： NBR OR SILICONE RUBBER. 1.5 END CAP： THERMOPLASTIC ， UL94 V-0. 1.6 PLASTIC RING:THERMOPLASTIC， UL94 V-0. 1.7 WIRE SEAL： SILICONE RUBBER. 1.8FIXED RUBBER:NBR OR SILICONE RUBBER. 2. SPECIFICATIONS ： 2.1 RATED CURRENT ： 2.1.1 STAMPED CONTACT 5A (MAX). 2.1.2 MACHINED CONTACT 7.5A (MAX). 2.2 RATED VOLTAGE： 250V(AC/DC). 2.3 OPERATING TEMPERATURE ： SEE TABLE. 2.4 DIELECTRIC WITHSTANDING VOLTAGE： LESS THAN 2 MILLIAMPS CURRENT LEAKAGE@1500 VOLTS AC. 2.5 INSULATION RESISTANCE： 5000 MEGOHMS MIN. 2.6 IP-CLASS ： IP67 AND IP69K IN THE MATED CONDITION, WIRE SEALS FULLY POPULATED. 2.7 MATING CYCLES DURABILITY： 500 CYCLES MIN. 2.8 RoHS COMPLIANT. 3. SUITABLE CONTACTS ： 20# CONTACT. 4. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 EN GINE E R : AP P RO V AL : M ATE R IA L S P E CIFICA TION S: CU STO M E R: PR OC ES S S PE C IF IC A TIO NS : ECO-MATE AQUARIUS, RECEPTACLE,IN-LINE, SIZE 14, 19 POS, SOCKET,END CAP. THIS DR A W IN G IS S UP P L IE D F OR IN FOR M A TION O NL Y . D E SIG N FE A TU RE S , SP E C IF IC A TION S A N D P E RF OR M A NC E D A TA SH OW N H E RE O N A RE TH E P R OP E R TY O F THE A M P HE N OL C OR P OR A TIO N. NO RIG H TS OF RE P R OD UC TION A R E IM P L IE D . A LL DIM E NS ION S AR E S UB J E CT TO N OR M A L SC A LE : M AN U FA CTU R IN G V A RIA TION S . TYP E DW G N O: B NE X T A S S 'Y : NONE A1 SH E ET 1 OF 1 ecomate® RM/RSSM/Aquarius™ - Contact Size 20 Options Crimp Contacts, Machined Part Number Male Female Crimp Contacts, Stamped & Formed AWG Wire Range (mm²) Plating Part Number Male Female AWG Wire Range (mm²) Plating Gold Flash MP20W23F MS20W23F 22-20 0.34-0.50 Gold Flash SP20W2F SS20W2F 22-20 0.34-0.50 MP20W23G5 MS20W23G5 22-20 0.34-0.50 Gold 5µ” SP20W2G5 SS20W2G5 22-20 0.34-0.50 Gold 5µ” MP20W23G10 MS20W23G10 22-20 0.34-0.50 Gold 10µ” SP20W2G10 SS20W2G10 22-20 0.34-0.50 Gold 10µ” MP20W23G15 MS20W23G15 22-20 0.34-0.50 Gold 15µ” SP20W2G15 SS20W2G15 22-20 0.34-0.50 Gold 15µ” MP20W23G30 MS20W23G30 22-20 0.34-0.50 Gold 30µ” SP20W2G30 SS20W2G30 22-20 0.34-0.50 Gold 30µ” Gold Flash MP24W23F MS24W23F 26-24 0.13-0.25 Gold Flash SP24W2F SS24W2F 26-24 0.14-0.25 MP24W23G5 MS24W23G5 26-24 0.13-0.25 Gold 5µ” SP24W2G5 SS24W2G5 26-24 0.14-0.25 Gold 5µ” MP24W23G10 MS24W23G10 26-24 0.13-0.25 Gold 10µ” SP24W2G10 SS24W2G10 26-24 0.14-0.25 Gold 10µ” MP24W23G15 MS24W23G15 26-24 0.13-0.25 Gold 15µ” SP24W2G15 SS24W2G15 26-24 0.14-0.25 Gold 15µ” MP24W23G30 MS24W23G30 26-24 0.13-0.25 Gold 30µ” SP24W2G30 SS24W2G30 26-24 0.14-0.25 Gold 30µ” MP28W23F MS28W23F 30-28 0.05-0.08 Gold Flash SP28W2F SS28W2F 30-28 0.05-0.08 Gold Flash MP28W23G5 MS28W23G5 30-28 0.05-0.08 Gold 5µ” SP28W2G5 SS28W2G5 30-28 0.05-0.08 Gold 5µ” MP28W23G10 MS28W23G10 30-28 0.05-0.08 Gold 10µ” SP28W2G10 SS28W2G10 30-28 0.05-0.08 Gold 10µ” MP28W23G15 MS28W23G15 30-28 0.05-0.08 Gold 15µ” SP28W2G15 SS28W2G15 30-28 0.05-0.08 Gold 15µ” MP28W23G30 MS28W23G30 30-28 0.05-0.08 Gold 30µ” SP28W2G30 SS28W2G30 30-28 0.05-0.08 Gold 30µ” Tooling, Machined Part Number QXRT20 Description Tooling, Stamped & Formed Part Number Contact Extraction Tool, #20 (Ø 1.0) Contact QXRT20 Description Contact Extraction Tool, #20 (Ø 1.0) Contact MFX-3959 Hand Crimp Tool for Machined Contacts MFX-3958 Hand Tool, Stamped & Formed Contact, Size 20, 20-28AWG MFX-3960 Pneumatic Crimp Tool for Machined Contact MFX-3957 Crimp Die for Stamped & Formed Contact Plating Options, All Symbol Misc Tooling, All Plating Part Number Description CA-4020-59 Sealing Plug, Size 16 & 20 T Tin Plated (for Stamped & Formed Contacts) S Silver Plated 5Um (for Machined Contacts) F Gold Plated Standard Quantity Order Options G5 Gold Plated (Thickness 5µ”) Machined Stamped & Formed G10 Gold Plated (Thickness 10µ”) Bulk Package, 500 Pieces Reel, 3000 Pieces G15 Gold Plated (Thickness 15µ”) G30 Gold Plated (Thickness 30µ”) Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021