RVPX-JE208EM2

SHEET 1 OF 2 DOCUMENT NO. A 2 RVPX-JE208EXX 3 4 REV. REVISIONS RVPX-JE208EXX LTR DOCUMENT NO. PART MARKING AS FOLLOWS AMPHENOL 77820 'DATE CODE' A DESCRIPTION DATE INITIAL RELEASE 17-DEC-19 D 0.65 REF WAFER #1 SLOT SEE NOTE 2 4 1.8 SHEET 1 OF 2 72 PLC A REV. 4.40 0.13 CONNECTOR KEEPOUT AREA 2.1 REF 15.30 HOUSING PIN "i8" 1.43 0.05 8 SPACES AT 1.8 = 14.4 1.7 REF PIN "a1" 1.52 REF 1.8 7 PLC 4 1.8 2.03 REF 0.75 1.39 6.95 REF PC BOARD LAYOUT (CONNECTOR SIDE) SCALE 4/1 V TABLE 1 PART MARKING AS FOLLOWS 'AAO PART NUMBER' (SEE TABLE 1) 'WORK ORDER NUMBER AS LOT NUMBER' B PLATING THICKNESS AND MATERIAL BY PART NUMBER PART NUMBER GOLD IN CONTACT AREA RVPX-JE208EM1 50 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN RVPX-JE208EM2 50 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN-LEAD RVPX-JE208EC1 30 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN RVPX-JE208EC2 30 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN-LEAD 10.5 0.13 ADDITIONAL CONNECTOR-SIDE KEEPOUT AREA REQUIRED IF CONNECTOR-SIDE EXTRACTION TOOL IS TO BE USED. 4 1 NOTES: FORMAT: C-U_E-I 0.65 REF PTH CALLOUT TYPICAL HOLE n 0.43-.47 DRILL n 0.36 # .05 FINISH HOLE n 0.75 PAD 2 A X SEE TABLE 1 FOR PART NUMBER AND FINISHES 3 12.6 REF UNLESS OTHERWISE SPECIFIED HOUSING: GLASS FILLED LCP, UL94 - V0 CONTACT: Cu ALLOY THE USE OF THIS DOCUMENT IS UNLIMITED. HOWEVER, DOCUMENTS REFERENCED HEREON MAY CONTAIN LIMITED RIGHTS DATA. PRO/ENGINEER INFORMATION NONE RELEASED / Jan. 14 2020, 2:35:51 PM DOCUMENT NO. RVPX-JE208EXX SHEET 1 OF 2 4 REV. A Pro/e Model Used: RVPX-JE208EXX.ASSEM NEXT ASSEMBLY A 1.8 = 12.6 Eng PDM Information For Reference Only 12.10 V REVISION 7 SPACES AT 16.03 4.40 0.13 Drawing Name: RVPX-JE208EXX 3 LINEAR DIMENSIONS ARE IN MILLIMETERS TOLERANCES: .XXXX = # .- ANGLES= # 1 $ .XXX = # ..XX = # .13 .X = # .5 -----------------------DIM.& TOL. PER ASME Y14.5M; DRM PER MIL-DTL-31000; OTHER Amphenol Stds. PER 9-3800 SPECIFICATIONS MATERIAL SPEC. N/A POS QTY PART NUMBER APPROVALS PREPARED BY DESCRIPTION DATE AMPHENOL CORPORATION S.LANGELIER PROCESS SPEC. 9-3895 9-3856-5 LEGENDS: =FLAG NOTE CALL OUT REFERENCE ONLY S.LANGELIER DESIGN ACTIVITY GROUP G.PECK 40-60 DELAWARE AVENUE SIDNEY, N.Y. 13838 17-DEC-19 BOARD LEVEL THIRD ANGLE PROJECTION SIZE C CONNECTOR ASSEMBLY, BACKPLANE VERTICAL RECEPTACLE, 8 POS, END RVPX EVO 2 CAGE CODE 77820 SCALE: 4/1 2 NOTE PARTS LIST ENGINEER IN CHARGE DESIGN MANAGER NICKEL OVERALL COMPLIANT A 1.45 REF TOP OF DAUGHTERCARD CONNECTOR SIDE 1 2.1 REF DOCUMENT NO. RVPX-JE208EXX REF. RVPX-J08EXX 1 U REV. A SHEET 1 OF 2 RVPX-JE208EXX Z CONTACT 1.8 8 PLC VERSION 18.6 0.2 X V Z REV. 14.40 REF SHEET 1 OF 2 C C 4.50 16.2 Z DOCUMENT NO. 7.20 REF SHEET 2 OF 2 DOCUMENT NO. A 2 RVPX-JE208EXX 3 4 REV. RVPX-JE208EXX REAR TRANSITION MODULE APPLICATION DOCUMENT NO. D 16.03 4.4 0.13 0.75 HOUSING SHEET 2 OF 2 7.2 REF REV. A 14.4 REF 16.2 18.60 CONTACT C C WAFER #1 SLOT 4 1.8 15.30 SEE NOTE 2 0 PIN "a1" 4.9 0.13 VERSION 0.65 REF 1.45 REF 72 PLC A REVISION PIN "a8" CONNECTOR KEEPOUT AREA 1.7 REF 12.10 V V Eng PDM Information For Reference Only 2.1 REF 6.95 REF 8 SPACES AT B 1.8 = 14.4 TOP OF DAUGHTERCARD CONNECTOR SIDE 10.5 0.13 A REV. 2.1 REF 1.5 A 2.03 REF 12.6 REF RTM PC BOARD LAYOUT (CONNECTOR SIDE) SCALE 5/1 NOTES: FORMAT: C-U_E-I 0.65 REF PLASTIC ALIGNMENT PIN MUST BE REMOVED FLUSH TO HOUSING BODY PRIOR TO INSERTION INTO RTM LAYOUT THE USE OF THIS DOCUMENT IS UNLIMITED. HOWEVER, DOCUMENTS REFERENCED HEREON MAY CONTAIN LIMITED RIGHTS DATA. SIZE C RELEASED / Jan. 14 2020, 2:35:52 PM DOCUMENT NO. RVPX-JE208EXX SHEET 2 OF 2 4 A CAGE CODE 77820 SCALE: 4/1 REV. 3 2 RVPX-JE208EXX 7 SPACES AT 1.8 = 12.6 DOCUMENT NO. 4 1.8 SHEET 2 OF 2 X 1.8 8 PLC DOCUMENT NO. RVPX-JE208EXX REF: RVPX-J08EXX 1 REV. A SHEET 2 OF 2