RVPX-JE21612M2

A SHEET 1 OF 1 DOCUMENT NO. 2 RVPX-JE21611XX 3 4 REV. REVISIONS RVPX-JE21611XX LTR A DOCUMENT NO. PART MARKING AS FOLLOWS AMPHENOL 77820 'DATE CODE' INITIAL RELEASE 17-AUG-20 2 SEE NOTE 54 PLC SHEET 1 OF 1 0.65 REF SEE NOTE 5 1.8 3 90 PLC PIN "i16" 2.1 REF A REV. CONTACTS i9, i10, i11, i12, i13, i14, i15, i16 28.65 0.1 DATE D WAFER #1 SLOT 4.90 0.13 DESCRIPTION 8 SPACES AT TOP OF DAUGHTERCARD (CONNECTOR SIDE) 1.8 = 14.4 1.7 REF COLUMNS 9 THRU 16 CONTACTS NOT LOADED EXCEPT CONTACTS i9, i10, i11, i12, i13, i14, i15, i16 i h g f e d c b a COLUMN 1 CONTACTS NOT LOADED 29.38 0.1 28.30 0.10 V 5 4 SEE TABLE 1 FOR PART NUMBER AND FINISHES 3 PTH n n n 2 1 A ADDITIONAL CONNECTOR-SIDE KEEPOUT AREA REQUIRED IF CONNECTOR-SIDE EXTRACTION TOOL IS TO BE USED. 1.45 26 PLACES EVO 2 CONTACT 26 PLC HOUSING: GLASS FILLED LCP, UL94 - V0 CONTACT: Cu ALLOY FORMAT: C-U_E-I NOTES: THE USE OF THIS DOCUMENT IS UNLIMITED. HOWEVER, DOCUMENTS REFERENCED HEREON MAY CONTAIN LIMITED RIGHTS DATA. PRO/ENGINEER INFORMATION NONE DOCUMENT NO. RVPX-JE21611XX SHEET 1 OF 1 4 REV. A Pro/e Model Used: RVPX-J16MXX.ASSEM NEXT ASSEMBLY Drawing Name: RVPX-JE21611XX 3 6 2 2 2 2 2 2 2 2 2 7 3 3 3 3 3 3 3 3 3 8 3 3 3 3 3 3 3 3 3 9 N N N N N N N N 3 10 N N N N N N N N 3 11 N N N N N N N N 3 12 N N N N N N N N 3 13 N N N N N N N N 3 14 N N N N N N N N 3 15 N N N N N N N N 3 16 N N N N N N N N 3 PC BOARD LAYOUT (CONNECTOR SIDE) SCALE 3/1 (SEE NOTE 2 ) TABLE 1 GOLD IN CONTACT AREA RVPX-JE21611M1 50 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN RVPX-JE21611M2 50 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN-LEAD WAFER #1 SLOT RVPX-JE21611C1 30 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN RVPX CONTACT 45 PLC RVPX-JE21611C2 30 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN-LEAD UNLESS OTHERWISE SPECIFIED LINEAR DIMENSIONS ARE IN MILLIMETERS TOLERANCES: .XXXX = # .- ANGLES= # 1 $ .XXX = # ..XX = # .13 .X = # .5 -----------------------DIM.& TOL. PER ASME Y14.5M; DRM PER MIL-DTL-31000; OTHER Amphenol Stds. PER 9-3800 SPECIFICATIONS MATERIAL SPEC. N/A POS QTY PART NUMBER APPROVALS PREPARED BY DESIGN MANAGER DESCRIPTION PROCESS SPEC. 9-3895 9-3856-5 =FLAG NOTE CALL OUT REFERENCE ONLY DESIGN ACTIVITY GROUP G.PECK DATE AMPHENOL CORPORATION 40-60 DELAWARE AVENUE SIDNEY, N.Y. 13838 17-AUG-20 BOARD LEVEL THIRD ANGLE PROJECTION SIZE C CONNECTOR ASSEMBLY, BACKPLANE VERTICAL RECEPTACLE MIXED LOAD CAGE CODE 77820 SCALE: 3/1 2 NOTE PARTS LIST S.LANGELIER S.LANGELIER NICKEL OVERALL COMPLIANT ENGINEER IN CHARGE LEGENDS: 0 5 2 2 2 2 2 2 2 2 2 PART NUMBER 0.65 REF PTH CALLOUT n 0.63-.67 DRILL n 0.56 # .05 FINISH HOLE n 1.02 PAD 4 2 2 2 2 2 2 2 2 2 PLATING THICKNESS AND MATERIAL BY PART NUMBER 2.40 45X PLACES 25.20 REF 3 2 2 2 2 2 2 2 2 2 3 = EVO 2 CONTACT (SEE NOTE 3 ) PART MARKING AS FOLLOWS 'AAO PART NUMBER' (SEE TABLE 1) 'WORK ORDER NUMBER AS LOT NUMBER' CALLOUT 0.42-.48 DRILL 0.36 # .05 FINISH HOLE 0.75 PAD RELEASED / Sep. 02 2020, 8:39:36 AM 2 2 2 2 2 2 2 2 2 2 2 = RVPX CONTACT V B 1 N N N N N N N N N A 0.75 0.1 VERSION 15 SPACES AT 1.8 = 27 Eng PDM Information For Reference Only 4.40 0.13 1.8 15 PLC REVISION Z PIN "a1" 0.89 REF 5 1.8 A Z s 1.8 8 PLC DOCUMENT NO. RVPX-JE21611XX REF. RVPX-J16MXX 1 U REV. A SHEET 1 OF 1 RVPX-JE21611XX 18.6 0.1 0.2 s X V s REV. 16.20 Z 2.1 REF SHEET 1 OF 1 14.40 REF 7.20 REF DOCUMENT NO. C C