RVPX-P08DM1

A SHEET 1 OF 2 DOCUMENT NO. 2 RVPX-P08DXX 3 REV. REVISIONS A 0.56 0.05 PIN "g8" 2 HOLES TABLE 1 INTERCONNECTIONS WITH BACKPLANE CONNECTOR RVPX-J08EXX 9.35 TYP DAUGHTERCARD CONNECTOR PIN BACKPLANE CONNECTOR PIN SIGNAL PAIR bx cx cx dx SIGNAL PAIR ex gx fx ax, dx, gx, (ALL COMMONED) hx ax, bx, ex, fx, ix CONTACT USAGE 1.35 TYP TYPICAL INTERCONNECTIONS FOR COLUMN (WAFER): 1,3,5,7 1.80 7 PLC GROUND 3 40 PLC (0.84) GROUNDS (12.50) DAUGHTERCARD CONNECTOR PIN BACKPLANE CONNECTOR PIN SIGNAL PAIR ax ax bx bx SIGNAL PAIR dx ex ex fx SIGNAL gx cx, fx, (ALL COMMONED) ix CONTACT USAGE DAUGHTERCARD EDGE 12.60 TOP OF MOTHERBOARD GROUNDS PC BOARD LAYOUT (CONNECTOR SIDE) SCALE 5/1 0 PIN "a1" 1.50 0.1 C VERSION 3 16 SIGNAL PAIRS OUTLINED FOR CLARITY cx, dx, gx, hx A REV. A TYPICAL INTERCONNECTIONS FOR COLUMN (WAFER): 2,4,6,8 REVISION SHEET 1 OF 2 SEE NOTE 2 56 HOLES C 01-MAR-19 WAFER #1 7.2 CONNECTOR KEEPOUT AREA (10.85) INTIAL RELEASE D 4 SIGNAL CONTACTS OUTLINE FOR CLARITY (2.21) DATE NOTE: "x" DESIGNATES THE COLUMN NUMBER Eng PDM Information For Reference Only DOCUMENT NO. 3 DESCRIPTION TABLE 2 B PLATING THICKNESS AND MATERIAL BY PART NUMBER 3 2 A FORMAT: C-U_E-I NOTES: 1 SEE TABLE 1 FOR INTERCONNECTIONS TO BACKPLANE CONNECTOR PTH CALLOUT TYPICAL HOLE n 0.53-.57 DRILL n 0.46 # .05 FINISH HOLE n 0.92 PAD UNLESS OTHERWISE SPECIFIED HOUSING: GLASS FILLED LCP, UL94 - V0 CONTACT: Cu ALLOY POST: STAINLESS STEEL, PASSIVATED THE USE OF THIS DOCUMENT IS UNLIMITED. HOWEVER, DOCUMENTS REFERENCED HEREON MAY CONTAIN LIMITED RIGHTS DATA. PRO/ENGINEER INFORMATION NONE RELEASED / May. 09 2019, 3:34:51 PM DOCUMENT NO. RVPX-P08DXX SHEET 1 OF 2 4 REV. A Pro/e Model Used: 426-0010-005.PART NEXT ASSEMBLY Drawing Name: RVPX-P08DXX 3 LINEAR DIMENSIONS ARE IN MILLIMETERS TOLERANCES: .XXXX = # .- ANGLES= # 1 $ .XXX = # ..XX = # .13 .X = # .5 -----------------------DIM.& TOL. PER ASME Y14.5M; DRM PER MIL-DTL-31000; OTHER Amphenol Stds. PER 9-3800 SPECIFICATIONS MATERIAL SPEC. N/A POS 50 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN RVPX-P08DM2 50 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN-LEAD RVPX-P08DC1 30 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN RVPX-P08DC2 30 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN-LEAD QTY APPROVALS PREPARED BY PART NUMBER DESCRIPTION DATE AMPHENOL CORPORATION S.LANGELIER PROCESS SPEC. 9-3895 9-3856-5 LEGENDS: =FLAG NOTE CALL OUT REFERENCE ONLY S.LANGELIER DESIGN ACTIVITY GROUP E.HICKEY 40-60 DELAWARE AVENUE SIDNEY, N.Y. 13838 01-MAR-19 BOARD LEVEL THIRD ANGLE PROJECTION SIZE C RIGHT ANGLE PLUG ASSEMBLY HALF CENTER, RVPX DAUGHTERCARD CONNECTOR, VITA 46 CAGE CODE 77820 SCALE: 3/1 2 NOTE PARTS LIST ENGINEER IN CHARGE DESIGN MANAGER NICKEL OVERALL A RVPX-P08DM1 COMPLIANT REV. SEE TABLE 2 FOR PART NUMBER AND FINISHES GOLD IN CONTACT AREA SHEET 1 OF 2 4 PART NUMBER DOCUMENT NO. RVPX-P08DXX REF. RVPX-P08VXX 1 U REV. A SHEET 1 OF 2 RVPX-P08DXX RVPX-P08DXX LTR M DOCUMENT NO. 4 SHEET 2 OF 2 DOCUMENT NO. A 2 RVPX-P08DXX 3 4 REV. DOCUMENT NO. RVPX-P08DXX D SHEET 2 OF 2 DAUGHTERCARD EDGE PART MARKING AS FOLLOWS AMPHENOL 77820 'AAO PART NUMBER' (SEE TABLE 1) 'DATE CODE' 'WORK ORDER NUMBER AS LOT NUMBER' 11.81 0.20 REV. A 4 PAD CONTACT AREA: TYP HOUSING C C 0 5.50 REF A REVISION 1.94 TYP VERSION 18.40 0.1 1.80 REF 7 PLC 6.30 REF 10.00 # 0.13 1.50 REF 12.60 REF 10.50 # 0.13 10.85 REF 2.69 0.1 2 PLC SEE NOTE 1 POST SEE NOTE 4 P.C.B TAIL CONTACT 6.30 REF 7.20 REF 12.60 REF A DOCUMENT NO. X NOTES: FORMAT: C-U_E-I RVPX-P08DXX 14.30 0.1 X SHEET 2 OF 2 A REV. B 1.35 REF 6 PLC Eng PDM Information For Reference Only 3.70 0.1 THE USE OF THIS DOCUMENT IS UNLIMITED. HOWEVER, DOCUMENTS REFERENCED HEREON MAY CONTAIN LIMITED RIGHTS DATA. SIZE C RELEASED / May. 09 2019, 3:34:51 PM DOCUMENT NO. RVPX-P08DXX SHEET 2 OF 2 4 77820 SCALE: 3/1 REV. A CAGE CODE 3 2 DOCUMENT NO. RVPX-P08DXX REF: RVPX-P08VXX 1 REV. A SHEET 2 OF 2