RVPX-P08PM1

SHEET 1 OF 2 DOCUMENT NO. A 2 RVPX-P08PXX 3 4 REV. REVISIONS RVPX-P08PXX LTR A M DESCRIPTION DATE INITIAL RELEASE 25-MAY-18 DOCUMENT NO. D WAFER #1 0.56 0.05 (2.21) CONNECTOR KEEPOUT AREA INTERCONNECTIONS WITH BACKPLANE CONNECTOR RVPX-J08EXX SEE NOTE 2 7.2 PIN "g8" TABLE 1 2 HOLES TYPICAL INTERCONNECTIONS FOR COLUMN (WAFER): 1, 2, 3, 4, 5, 6, 7, 8 SHEET 1 OF 2 56 HOLES CONTACTS NOT CONNECTED 8 PLC REV. A (10.85) C 3 16 POWER CONTACT GROUPS OUTLINED FOR CLARITY 9.35 TYP CONTACT USAGE DAUGHTERCARD CONNECTOR PIN BACKPLANE CONNECTOR PIN POWER ax, bx, cx ax, bx, cx, dx POWER ex, fx, gx fx, gx, hx, ix NOT CONNECTED dx ex NOTE: "x" DESIGNATES THE COLUMN NUMBER 1.35TYP (0.84) C 1.50 0.1 1.80 7 PLC 12.60 (2.64) PIN "a1" DAUGHTERCARD EDGE (12.50) 0 VERSION TOP OF MOTHERBOARD Eng PDM Information For Reference Only A REVISION PC BOARD LAYOUT (CONNECTOR SIDE) SCALE 5/1 TABLE 2 PLATING THICKNESS AND MATERIAL BY PART NUMBER FORMAT: C-U_E-I NOTES: 3 SEE TABLE 1 FOR INTERCONNECTIONS TO BACKPLANE CONNECTOR 2 PTH CALLOUT TYPICAL HOLE n 0.53-.57 DRILL n 0.46 # .05 FINISH HOLE n 0.92 PAD 1 UNLESS OTHERWISE SPECIFIED HOUSING: GLASS FILLED LCP, UL94 - V0 CONTACT: Cu ALLOY POST: STAINLESS STEEL, PASSIVATED THE USE OF THIS DOCUMENT IS UNLIMITED. HOWEVER, DOCUMENTS REFERENCED HEREON MAY CONTAIN LIMITED RIGHTS DATA. PRO/ENGINEER INFORMATION N/A RELEASED / Apr. 30 2019, 12:39:10 PM DOCUMENT NO. RVPX-P08PXX SHEET 1 OF 2 4 REV. A Pro/e Model Used: P1233-426-0008-001_ATCS-1 .PART NEXT ASSEMBLY Drawing Name: RVPX-P08PXX 3 LINEAR DIMENSIONS ARE IN MILLIMETERS TOLERANCES: .XXXX = # .- ANGLES= # 1 $ .XXX = # ..XX = # .13 .X = # .5 -----------------------DIM.& TOL. PER ASME Y14.5M; DRM PER MIL-DTL-31000; OTHER Amphenol Stds. PER 9-3800 SPECIFICATIONS MATERIAL SPEC. N/A 50 µ-INCH MIN 50 µ-INCH MIN TIN RVPX-P08PM2 50 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN-LEAD RVPX-P08PC1 30 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN RVPX-P08PC2 30 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN-LEAD QTY APPROVALS PREPARED BY PART NUMBER DESCRIPTION DATE AMPHENOL CORPORATION S. LANGELIER PROCESS SPEC. 9-3895 9-3856-5 LEGENDS: =FLAG NOTE CALL OUT REFERENCE ONLY S. LANGELIER DESIGN ACTIVITY GROUP E.HICKEY 40-60 DELAWARE AVENUE SIDNEY, N.Y. 13838 25-MAY-18 BOARD LEVEL THIRD ANGLE PROJECTION SIZE C RIGHT-ANGLE PLUG ASSEMBLY HALF LEFT END, RVPX DAUGHTERCARD CONNECTOR, VITA 46 CAGE CODE 77820 SCALE: 5.0 2 NOTE PARTS LIST ENGINEER IN CHARGE DESIGN MANAGER A 50 µ-INCH MIN REV. RVPX-P08PM1 POS NICKEL OVERALL COMPLIANT DOCUMENT NO. RVPX-P08PXX REF. RVPX-P08VXX 1 U REV. A SHEET 1 OF 2 RVPX-P08PXX A SEE TABLE 2 FOR PART NUMBER AND FINISHES GOLD IN CONTACT AREA SHEET 1 OF 2 4 PART NUMBER DOCUMENT NO. B REV. DOCUMENT NO. DAUGHTERCARD EDGE DOCUMENT NO. A RVPX-P08PXX 11.81 0.2 4 PAD CONTACT AREA: TYP SHEET 2 OF 2 2 RVPX-P08PXX 3 4 PART MARKING AS FOLLOWS AMPHENOL 77820 'AAO PART NUMBER' (SEE TABLE 1) 'DATE CODE' 'WORK ORDER NUMBER AS LOT NUMBER' HOUSING D SHEET 2 OF 2 18.40 0.1 REV. A 5.50 REF 1.94 TYP 2.69 0.1 2 PLC 3.70 0.1 C C 1.80 REF 7 PLC POSITION a1 10.00 5.40 REF # .13 10.50 # .13 1.35 REF 6 PLC 1.50 REF 10.85 REF SEE NOTE POST 1 SEE NOTE 4 P.C.B TAIL CONTACT Eng PDM Information For Reference Only A REVISION 0 VERSION 12.60 REF B 7.20 REF A SHEET 2 OF 2 12.60 REF A FORMAT: C-U_E-I NOTES: DOCUMENT NO. X SEE SHEET 1 THE USE OF THIS DOCUMENT IS UNLIMITED. HOWEVER, DOCUMENTS REFERENCED HEREON MAY CONTAIN LIMITED RIGHTS DATA. SIZE C RELEASED / Apr. 30 2019, 12:39:10 PM DOCUMENT NO. RVPX-P08PXX RVPX-P08PXX 16.08 # .1 X REV. 5.40 REF SHEET 2 OF 2 4 77820 SCALE: 5.0 REV. A CAGE CODE 3 2 DOCUMENT NO. RVPX-P08PXX REF: RVPX-P08VXX 1 REV. A SHEET 2 OF 2