RVPX-PE20815M2

B SHEET 1 OF 2 DOCUMENT NO. 2 RVPX-PE20815XX 3 4 REV. REVISIONS WAFER #1 7.2 CONNECTOR KEEPOUT AREA 0.56 0.05 PIN "g8" A INTIAL RELEASE 17-AUG-20 B UPDATE WAFER LOAD/FOOTPRINT IMAGES TO REFLECT CORRECT LOAD 19-JUL-22 ECN:2152 2 9.35 TYP TYPICAL INTERCONNECTIONS FOR COLUMN (WAFER):1,3,5,7 (0.84) C DAUGHTERCARD CONNECTOR PIN BACKPLANE CONNECTOR PIN SIGNAL PAIR bx cx cx dx SIGNAL PAIR ex gx fx ax, dx, gx, (ALL COMMONED) hx ax, bx, ex, fx, ix CONTACT USAGE GROUND 40 PLC (12.50) 3 1.80 7 PLC PIN "a1" GROUNDS DAUGHTERCARD EDGE C TYPICAL INTERCONNECTIONS FOR COLUMN (WAFER): 2,4,6,8 DAUGHTERCARD CONNECTOR PIN BACKPLANE CONNECTOR PIN SIGNAL PAIR ax ax bx bx SIGNAL PAIR dx ex ex fx SIGNAL gx cx, fx, (ALL COMMONED) ix CONTACT USAGE 12.60 TOP OF MOTHERBOARD PC BOARD LAYOUT (CONNECTOR SIDE) SCALE 5/1 GROUNDS 2 REV. B 3 16 SIGNAL PAIRS OUTLINED FOR CLARITY TABLE 1 INTERCONNECTIONS WITH BACKPLANE CONNECTOR RVPX-J08EXX VERSION SHEET 1 OF 2 56 HOLES (10.85) D 2 HOLES SEE NOTE (2.21) DATE cx, dx, gx, hx B DOCUMENT NO. 3 4 SIGNAL CONTACTS OUTLINE FOR CLARITY DESCRIPTION REVISION RVPX-PE20815XX LTR Eng PDM Information For Reference Only NOTE: "x" DESIGNATES THE COLUMN NUMBER TABLE 2 PLATING THICKNESS AND MATERIAL BY PART NUMBER 2 A FORMAT: C-U_E-I NOTES: 1 SEE TABLE 1 FOR INTERCONNECTIONS TO BACKPLANE CONNECTOR PTH CALLOUT TYPICAL HOLE n 0.38-.43 DRILL n 0.31 # .05 FINISH HOLE n 0.66 PAD UNLESS OTHERWISE SPECIFIED HOUSING: GLASS FILLED LCP, UL94 - V0 CONTACT: Cu ALLOY POST: STAINLESS STEEL, PASSIVATED THE USE OF THIS DOCUMENT IS UNLIMITED. HOWEVER, DOCUMENTS REFERENCED HEREON MAY CONTAIN LIMITED RIGHTS DATA. PRO/ENGINEER INFORMATION NONE DOCUMENT NO. RVPX-PE20815XX SHEET 1 OF 2 4 REV. B Pro/e Model Used: 426-0046-001 .PART NEXT ASSEMBLY Drawing Name: RVPX-PE20815XX 3 IMAGED / Sep. 06 2022, 2:05:15 PM LINEAR DIMENSIONS ARE IN MILLIMETERS TOLERANCES: .XXXX = # .- ANGLES= # 1 $ .XXX = # ..XX = # .13 .X = # .5 -----------------------DIM.& TOL. PER ASME Y14.5M; DRM PER MIL-DTL-31000; OTHER Amphenol Stds. PER 9-3800 SPECIFICATIONS MATERIAL SPEC. N/A 50 µ-INCH MIN 50 µ-INCH MIN TIN RVPX-PE20815M2 50 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN-LEAD RVPX-PE20815C1 30 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN RVPX-PE20815C2 30 µ-INCH MIN 50 µ-INCH MIN 50 µ-INCH MIN TIN-LEAD QTY PART NUMBER APPROVALS PREPARED BY DESCRIPTION DATE AMPHENOL CORPORATION S.LANGELIER PROCESS SPEC. 9-3895 9-3856-5 LEGENDS: =FLAG NOTE CALL OUT S.LANGELIER DESIGN ACTIVITY GROUP G.PECK 40-60 DELAWARE AVENUE SIDNEY, N.Y. 13838 19-Jul-22 BOARD LEVEL THIRD ANGLE PROJECTION SIZE C RIGHT ANGLE PLUG ASSEMBLY HALF CENTER, EVO 2 DAUGHTERCARD CONNECTOR, VITA 46 CAGE CODE 77820 SCALE: 3/1 REFERENCE ONLY 2 NOTE PARTS LIST ENGINEER IN CHARGE DESIGN MANAGER B 50 µ-INCH MIN POS NICKEL OVERALL REV. RVPX-PE20815M1 COMPLIANT DOCUMENT NO. RVPX-PE20815XX REF. RVPX-P08VXX 1 U REV. B SHEET 1 OF 2 RVPX-PE20815XX 3 SEE TABLE 2 FOR PART NUMBER AND FINISHES GOLD IN CONTACT AREA SHEET 1 OF 2 4 PART NUMBER DOCUMENT NO. B DOCUMENT NO. SHEET 2 OF 2 B 2 RVPX-PE20815XX 3 4 REV. DOCUMENT NO. RVPX-PE20815XX D SHEET 2 OF 2 PART MARKING AS FOLLOWS AMPHENOL 77820 'AAO PART NUMBER' (SEE TABLE 1) 'DATE CODE' 'WORK ORDER NUMBER AS LOT NUMBER' DAUGHTERCARD EDGE 4 PAD CONTACT AREA: TYP 11.81 0.20 REV. B HOUSING C C 18.40 0.10 5.50 REF 2 VERSION 0.98 TYP B Eng PDM Information For Reference Only 10.85 REF SEE NOTE 4 P.C.B TAIL CONTACT B 1.50 REF 12.60 REF B SEE NOTE 1 POST 10.50 # 0.13 6.30 REF 2.69 0.10 2 PLC REV. 10.00 # 0.13 1.80 REF 7 PLC 1.350 REF 6 PLC REVISION 3.70 0.10 6.30 REF SHEET 2 OF 2 7.20 REF 12.60 REF 14.30 0.10 X DOCUMENT NO. A NOTES: FORMAT: C-U_E-I RVPX-PE20815XX X THE USE OF THIS DOCUMENT IS UNLIMITED. HOWEVER, DOCUMENTS REFERENCED HEREON MAY CONTAIN LIMITED RIGHTS DATA. DOCUMENT NO. RVPX-PE20815XX SIZE C SHEET 2 OF 2 4 77820 SCALE: 3/1 REV. B CAGE CODE 3 IMAGED / Sep. 06 2022, 2:05:15 PM 2 DOCUMENT NO. RVPX-PE20815XX REF: RVPX-P08VXX 1 REV. B SHEET 2 OF 2