SCE-B-L1K07-14PA

Amphenol the ultimate connection SCE Series Interconnect Solutions For more information call 210 372 0631 Amphenol PCD mikehands@amphenolpcd.com SCE Snatch Connector Electrical Series The Ultimate Connector Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place, achieving high environmental sealing to IP68. The metalwork is machined from brass, giving an increased number of mating cycles over traditional aluminium connectors. The snatch push pull design is fully grounded and cannot be locked when mated, as the cable receptacle has no moving parts, i.e. coupling nut, thus eliminating the path for the ingress of moisture and dust to the interface. The latch push pull design can be non-grounded or grounded and is locked when mated by rotating the coupling nut fitted to the cable receptacle by 30o. This coupling mechanism locks the connectors together, ensuring that they cannot be inadvertently demated. Both are fitted with internal and external o-rings for sealing. The chassis mounting plug remains unchanged to allow the user to select either a snatch or latch cable receptacle without changing the equipment interface. Scoop proof shell to shell keying is provided with five different key options of A, B, C, D and N positions, to prevent mis-mating between shells of different operations. Amphenol offers full cable harness solutions with overmoulding capabilities or, where preferred, a heat shrink boot can be used. 2 SCE Terminology 01T 01K L1K Body Backshell Coupling Nut Integral Backshell for Bandit Strap or Zeta Lock Crimp Ferrule Integral Backshell SCE Mating Options Snatch In Line Receptacle SCE-B-01K Chassis Mount Receptacle SCE-B-76A Chassis Mount Plug remains same to mate with Snatch or Latch Receptacle Latch In Line Receptacle SCE-B-L1K 3 SCE Performance Information INSERT AVAILABILITY 06-05 5 #22 AWG Contacts 06-06 6 #22 AWG Contacts 06-07 7 #22 AWG Contacts 07-10A 8 #22 AWG Contacts and 2 #16 AWG Contacts 07-12 12 #22 AWG Contacts 07-14 14 #22 AWG Contacts 08-19 19 #22 AWG Contacts CONTACT SPECIFICATIONS Contact Resistance 5 mΩ initially Less than 10 mΩ Shell to Shell Conductivity 5 mΩ initially Less than 10 mΩ INSERT SPECIFICATIONS Working Voltage (Sea Level) 115 Vac DWV (Sea Level) 500 Vac Insulation Resistance (Sea Level) 1GΩ @ 500 Vdc Current Rating (Individual Contact) 3A ENVIRONMENTAL o o Temperature -55 C / +85 C Salt Spray Resistance 500 hours Fluids As per MIL-C-26482 Series I Vibration and Shock As per MIL-C-26482 Series I Sealing IP68 through Unmated Bulkhead Connectors IP68 Mated Pair Interface Sand and Dust DEF STAN 07-55 (Part 2) Test D1 Icing/Frosting DEF STAN 07-55 (Part 2) Test B10 MECHANICAL Durability 2000 Matings Materials Shell : Brass – Standard plating finish Black Silver Contacts : Turned, Gold Plated Inserts and Seal : Proprietary Thermoplastic Polyester Elastomer 4 SCE Insert Availability – Shell Size 06 RECEPTACLES – PIN CONTACTS ONLY FRONT FACE VIEW SCE 7 WAY FRONT FACE VIEW SCE 6 WAY REAR FACE VIEW SCE 7 WAY REAR FACE VIEW SCE 6 WAY FRONT FACE VIEW SCE 5 WAY REAR FACE VIEW SCE 5 WAY PLUGS – SOCKET CONTACTS ONLY FRONT FACE VIEW SCE 7 WAY FRONT FACE VIEW SCE 6 WAY FRONT FACE VIEW SCE 5 WAY REAR FACE VIEW SCE 7 WAY REAR FACE VIEW SCE 6 WAY REAR FACE VIEW SCE 5 WAY 5 SCE Insert Availability – Shell Size 07 RECEPTACLES – PIN SOCKETS ONLY FRONT FACE VIEW 10 WAY FRONT FACE VIEW 12 WAY FRONT FACE VIEW 14 WAY REAR FACE VIEW 10 WAY REAR FACE VIEW 12 WAY REAR FACE VIEW 14 WAY FRONT FACE VIEW 10A WAY FRONT FACE VIEW 12 WAY FRONT FACE VIEW 14 WAY REAR FACE VIEW 10A WAY REAR FACE VIEW 12 WAY REAR FACE VIEW 14 WAY PLUGS – SOCKET CONTACTS ONLY 6 SCE Insert Availability – Shell Size 08 RECEPTACLES – PIN CONTACTS ONLY FRONT FACE VIEW 19 WAY REAR FACE VIEW 19 WAY PLUGS – SOCKET CONTACTS ONLY FRONT FACE VIEW 19 WAY REAR FACE VIEW 19 WAY SCE Keyway Orientation SCE Keyway Orientation Part Number Keyway Position AA’ Part Number Keyway Position AA’ SCE-B-76A**-**SN-**** NORMAL 180 SCE-B-01K**-**PN NORMAL 180 SCE-B-76A**-**SA-**** A 150 SCE-B-01K**-**PA A 150 SCE-B-76A**-**SB-*** B 210 SCE-B-01K**-**PB B 210 SCE-B-76A**-**SC-*** C 120 SCE-B-01K**-**PC C 120 SCE-B-76A**-**SD-*** D 240 SCE-B-01K**-**PD D 240 Part Number Keyway Position AA’ Part Number Keyway Position AA’ SCE-B-06K-**-**PN NORMAL 180 SCE-B-L1K**-**PN NORMAL 180 SCE-B-06K-**-**PA A 150 SCE-B-L1K**-**PA A 150 SCE-B-06K-**-**PB B 210 SCE-B-L1K**-**PB B 210 SCE-B-06K-**-**PC C 120 SCE-B-L1K**-**PC C 120 SCE-B-06K-**-**PD D 240 SCE-B-L1K**-**PD D 240 7 SCE Table of Styles – Up to 7 Ways SCE-B-01T06-XXPX-003 In Line Receptacle Solder Bucket Contacts Ø .462 (Ø 11.75) Crimp Ferrule .912 (23.25) .314 A/F (8.00 A/F) Ø .150 PCD (Ø3.80 PCD) 1.377 (26.00) All Dimensions are for reference only (Dimensions in brackets are in mm) SCE-B-01K06-0*-P* Snatch In Line Receptacle Integral Backshell Shell Size 06 8 SCE Table of Styles – Up to 7 Ways SCE-B-L1K06-XXPX Latch In Line Receptacle Integral Backshell, Non-Grounded (Shell Size 06) .974 REF. (24.74) Ø .540 REF. (13.72) Ø .332 REF. (6.43) .524 REF. (13.31) SOLDER BUCKET WILL ACCEPT 22 A.W.G. WIRE MAX For Grounded Latch connector, please add (985) to the end of part number 390-5016-XXX Receptacle Dust Cap and Cord Will suit Snatch and Latch Shell Size 06 0.117 I/D (3.03 ID) Eyelet Crimp Ferrule PART NO. SUPPLY WITH 390-5016-XXX-01 NO EYELET NO CRIMP FERRULE 390-5016-XXX-02 CRIMP FERRULE NO EYELET 390-5016-XXX-03 EYELET NO CRIMP FERRULE PART NUMBER 390 - 5016 - XXX - XX SERIES CRIMP/EYELET – SEE TABLE 1 STYLE – CAP FOR RECEPTACLE LENTH OF ROPE 130 – 130mm 140 – 140mm 9 SCE Table of Styles – Up to 14 Ways SCE-B-01K07-XXPX Snatch In Line Receptacle Integral Backshell Shell Size 07 .972 REF .575 REF .497 REF 22 AWG CONTACTS (14 off) SCE-B-L1K07-XXPX Latch In Line Receptacle Integral Backshell, Non Grounded Shell Size 07 .974 REF Ø.610 REF Ø .445 REF. .524 REF SOLDER BUCKET WILL ACCEPT 22 AWG WIRE MAX. For Grounded Latch connector, please add (985) to the end of part number 10 SCE Table of Styles 390-5020-XXX-XX(771) CordisisBlack Black Cord Eyeletand andCrimp CrimpFerrule FerruleBlack BlackZinc ZincCobalt Cobalt Eyelet Receptacle Dust Cap and Cord Will suit Snatch and Latch Shell Size 07 .590 REF Ø.575 REF SEE TABLE 1 EYELET CRIMP FERRULE CORDLENGTH LENGTHININMM MM CORD PART NUMBER SUPPLY WITH 390-5020-XXX-01 (771) NO EYELET NO CRIMP FERRULE 390-5020-XXX-02 (771) CRIMP FERRULE NO EYELET 390-5020-XXX-03 (771) EYELET NO CRIMP FERRULE PART NUMBER BREAKDOWN 390 - 5020 - XXX - XX (771) SERIES PLATING DEVIATION – BLACK ZINC COBALT STYLE CAP FOR SCE RECEPTACLE SIZE 07 CRIMP/EYELET OPTION – SEE TABLE 1 11 CORD LENGTH IN MILLIMETRES SCE Table of Styles – Up to 19 Ways SCE-B-L1K08-XXPX Latch In Line Receptacle Integral Backshell, Non-Grounded Shell Size 08 Ø.974 REF (24.74) .536 REF Ø.526 REF (13.36) Ø.700 REF (17.78) Ø.524 REF (13.31) SOLDER BUCKETS WILL ACCEPT 22 A.W.G. WIRE MAX For Grounded Latch connector, please add (985) to the end of part number 390-5022-XXX-XX(771) Cord is Black Eyelet and Crimp Ferrule Black Zinc Cobalt Receptacle Dust Cap and Cord Will suit Snatch and Latch Shell Size 08 PART NUMBER SUPPLY WITH 390-5022-XXX-01 (771) NO EYELET NO CRIMP FERRULE 390-5022-XXX-02 (771) CRIMP FERRULE NO EYELET 390-5022-XXX-03 (771) EYELET NO CRIMP FERRULE PART NUMBER BREAKDOWN 390 - 5020 - XXX - XX (771) PLATING DEVIATION – BLACK ZINC COBALT SERIES STYLE CAP FOR SCE RECEPTACLE SIZE 07 12 CRIMP/EYELET OPTION – SEE TABLE 1 CORD LENGTH IN MILLIMETRES SCE Table of Styles SCE-B-07A06-XXPX-001 Jam Nut Rear Mount Receptacles PCB Contacts .877 (22.25) Ø.462 Ø.11.75) .670 A/F (17.00 A/F) Ø.770 Ø19.60) Ø.030 (Ø0.78) .070 (1.85) .118 (3.00) .040 (1.00) .147 (3.70) SCE-B-07A06-XXPX-002 Jam Nut Rear Mount Receptacles Solder Bucket Contacts .670 A/F (17.00 A/F) Ø.770 (Ø19.60) Ø.462 Ø.11.75) .877 (22.25) Ø.150 PCD (Ø3.80 PCD) .065 (1.65) .112 (2.85) .070 (1.85) 13 SCE Table of Styles SCE-B-17A06-XXPX-001 Jam Nut Front Mount Receptacles PCB Contacts .877 (22.25) Ø.462 Ø11.75 Ø.770 Ø19.60 .670 A/F (17.00 A/F) .070 (22.25) .118 (3.00) .040 (1.00) .210 (5.35) .357 (9.05) SCE-B-17A06-XXPX-002 Jam Nut Front Mount Receptacles Solder Bucket Contacts .942 (23.95) Ø.770 (Ø19.60) Ø.670 (Ø17.00) .210 (5.35) Ø.150 PCD (Ø3.80 PCD) .118 (3.00) .020 (1.85) 14 SCE Table of Styles SCE-B-20A06-XXPX-001 2 Hole Mount Receptacle PCB Contacts .118 (3.00) .040 (1.00) .210 (5.35) .690 (17.50) .240 (6.10) Ø.112 (Ø 2.85) .240 (6.10) .240 (6.10) Ø.150 PCD (Ø3.80 PCD) Ø.462 Ø11.75 .690 (17.50) .240 (6.10) .727 (18.50) .147 (3.70) .247 (6.25) .050 (17.50) SCE-B-20A06-XXPX-002 2 Hole Mount Receptacle PCB Contacts .118 (3.00) .020 (1.85) .690 (17.50) .727 (18.50) .240 (6.10) Ø.462 (Ø 11.75) Ø.240 (Ø 6.10) Ø.690 (Ø 17.50) .240 (6.10) .240 (6.10) Ø.240 (Ø6.10) .240 (6.10) .050 (1.30) 15 SCE Table of Styles SCE-B-00A06-XXPX-001 Ø.112 (Ø2.85) Ø.462 Ø11.75 .727 (18.50) Ø.150 PCD (Ø3.80 PCD) .462 (11.75) .240 (6.10) .050 (1.30) .480 (12.20) .690 (17.50) Ø.240 Ø6.10 .240 (6.10) .030 (0.78) .240 (6.10) .690 (17.50) .490 (12.20) Ø.690 (Ø17.50) 4 Hole Mount Receptacle PCB Contacts .240 (6.10) .240 (6.10) .050 (1.30) .040 (1.00) .100 (2.55) .247 (6.25) Ø.150 PCD (Ø3.80 PCD) SCE-B-00A06-XXPX-002 4 Hole Mount Receptacle Solder Bucket Contacts .690 (17.50) .480 (12.20) .727 (18.50) .462 (11.75) SCE Table of Styles .480 (12.20) .690 (17.50) Ø.112 (Ø2.85) Panel Mounting Details – Shell Size 06 .481 .479 (12.20) (12.10) .123 Ø.121 (3.38) (Ø2.82) .558 Ø.554 (14.25) (Ø14.00) .123 Ø.121 (3.38) (Ø2.82) .100 (2.55) Ø.150 PCD (Ø3.80 PCD .050 (1.30) .491 Ø.489 (12.50) (Ø12.40) .491 Ø.489 (12.50) (Ø12.40) .571 .569 (14.50) (14.60) .721 .719 (18.20) (18.30) 16 .559 Ø.525 (14.10) (Ø13.30) SCE Table of Styles 390-0120-01 2 Hole Gasket for 2 Hole Mount Plug .686 .684 (17.40) (17.30) .481 .479 (12.20) (12.10) .686 .684 (17.40) (17.30) .131 .129 2 HOLES (3.30) (3.20) .481 .479 (12.20) (12.10) Ø.481 Ø.479 (Ø 12.20) (Ø 12.10) .044 .042 (1.10) (1.15) 390-0121-01 4 Hole Gasket for 4 Hole Mount Plug .131 Ø .129 4 HOLES (Ø 3.30) (Ø 3.35) .481 .479 (12.20) (12.10) .686 .684 (17.40) (17.30) Ø.481 Ø .479 (Ø 12.20) (Ø 12.10) .686 .684 (17.40) (17.30) .044 .042 (1.10) (1.15) .481 .479 (12.20) (12.10) 17 SCE Table of Styles 20GB-SCE-6XXX-XXX Front Mount Jam Nut Receptacle to Header Assembly LENGTH IN MM XXX – SEE TABLE MATING HALF CONNECTOR RS-311-6546 P1 P2 VARIANT LENGTH XXX 025 25MM 050 50MM 075 75MM 100 100MM 125 125MM 150 150MM Please contact Amphenol for full part numbering information Panel Nut - Torque to 2.25Nm = 1.65 foot pounds force 20GB-SCE-6XXX-XXX Rear Mount Jam Nut Receptacle to Header Assembly LENGTH IN MM XXX – SEE TABLE MATING HALF CONNECTOR RS-311-6546 P1 P2 VARIANT LENGTH XXX 025 25MM 050 50MM 075 75MM 100 100MM 125 125MM 150 150MM Please contact Amphenol for full part numbering information Panel Nut - Torque to 2.25Nm = 1.65 foot pounds force 18 SCE Table of Styles – Up to 7 Ways SCE-X-76A06-XXSX-001 Rear Mount Plug PCB Contacts Ø .550 (Ø 14.00) .653 Ø .150 PCD (Ø 3.80 PCD) .041 (1.05) .470 A/F (12.00 A/F) SCE-X-76A06-XXSX-002 Rear Mount Plug Solder Bucket Contacts Ø .550 (Ø 14.00) .592 (15.10) Ø .150 PCD (Ø 3.80 PCD) .153 (3.90) .061 (1.55) .470 A/F (12.00 A/F) 19 SCE Table of Styles – Up to 14 Ways SCE-B-76A07-XXSX-001 Jam Nut Front Mount Receptacle PCB Bucket Contacts .655 REF (16.64) .061 REF (1.55) Ø .620 REF (915.78) Ø .388 REF (9.86) .273 REF (6.93) SCE-B-76A07-XXSX-002 Jam Nut Front Mount Receptacle Solder Bucket Contacts .061 REF (1.55) .620 REF (15.75) Ø .388 REF (9.86) .655 REF (16.64) 20 SCE Table of Styles – Up to 19 Ways SCE-B-76A08-19SX-001 Jam Nut Front Mount Receptacle PCB Bucket Contacts .061REF (1.55) Ø.019 Ø .0.48 .462 X2 (11.73) Ø .822 REF (20.88) .655 REF (16.54) .041REF (1.04) .148REF (3.76) .269 MAX REF (6.83 FLAT) .7060 REF A/F (17.932 .118 REF (3) MAX PANEL SIZE .625-28 UN 2A THREAD SCE-B-76A08-19SX-002 Jam Nut Front Mount Receptacle Solder Bucket Contacts .655 REF (16.64) Ø.462 X2 (11.73) Ø.822 REF (20.88) .061 REF (1.55) (8.83) FLAT .269 MAX REF .148REF (3.76) .118 REF (3) MAX PANEL SIZE .625-28 UN-2A THREAD 21 SCE Table of Styles – Up to 7 Ways SCE-X-06T06-XXSX-003 In Line Plug Solder Bucket Contacts only (complete with Backshell) CRIMP FERRULE Ø .465 (Ø 11.80) .314 A/F (8.00) REAR Ø .150 PCD (Ø 3.80 PCD) .774 (19.75) SCE-B-06K06-XXPX In Line Plug Integral Backshell, Solder Bucket Contacts Shell Size 06 22 SCE Table of Styles – Up to 7 Ways SCE-X-67A06-XXSX-001 Front Mount Plug PCB Contacts Ø .550 (Ø 14.00) .445 (11.30) Ø .150 PCD (Ø 3.80 PCD) .107 (2.70) .470 A/F (12.00 A/F) .041 (1.05) .147 (3.70) SCE-X-67A06-XXSX-002 Front Mount Plug Solder Bucket Contacts Ø .550 (Ø 14.00) .506 (12.85) Ø .150 PCD (Ø 3.80 PCD) .153 (3.90) .147 (3.70) .061 (1.55) (12.00 A/F) 23 SCE Table of Styles 390-0088-130-XX Plug Dust Cap and Cord Will suit Plugs Shell Size 06 0.117 I/D (3.03 I/D) Eyelet Crimp Ferrule SEAL PART NO. SUPPLY WITH 390-0088-XXX-01 NO EYELET NO CRIMP FERRULE 390-0088-XXX-02 CRIMP FERRULE NO EYELET 390-0088-XXX-03 EYELET NO CRIMP FERRULE PART NUMBER INFORMATION 390 - 0088 - 130 - XX SERIES CRIMP/EYELET - SEE TABLE 1 STYLE – PROTECTIVE CAP FOR SCE PLUG CORD LENGTH (in mm) 390-5019-XXX-XX(771) Receptacle Dust Cap and Cord Will suit Snatch and Latch Shell Size 07 Cord is Black Eyelet and crimp ferrule black zinc cobalt .690 REF Ø .570 REF SEE TABLE 1 CRIMP FERRULE EYELET CORD LENGTH IN MM 24 PART NO SUPPLY WITH 390-5019-XXX-01(771) NO EYELETS NO CRIMP FERRULE 390-5019-XXX-02(771) CRIMP FERRULE NO EYELET 390-5019-XXX-03(771) EYELET NO CRIMP FERRULE Heatshrink Boots 100 Series – Bottle Shapes with Rib – MIL Style For use with SCE-06T and SCE-01T We have selected Heatshrink Boots from Hellermann Tyton. Heatshrink Boots from other manufacturers may be used if appropriate. This style is used in conjunction with the backshell (see page 13) providing strain relief and environmental sealing Fully recovered form (after heating) Hellermann Part No 113-4-G-WM250 104-4-G-WM250 H 0.3976 (10.7) 0.6456 (16.4) Dimensions apply to all materials unless otherwise indicated Expanded (Min) H JØ -H matl 0.3976 0.1811 (10.7) (4.6) 0.6456 0.6456 (16.4) (16.4) Recovered (Max) J -H matl 0.1811 (4.6) 0.6456 (16.4) H JØ 0.3110 (7.9) 0.3110 (7.9) 0.0787 (2.0) 0.149 (3.8) P ±10% 1.0 (25.4) 1.0 (25.4) Recovered Dimensions Fully Shrunk R Jo HW JW ±10% ±10% ±10% ±10% 0.5709 0.1811 0.0512 0.0512 (14.5) (4.6) (1.3) (1.3) 0.5590 0.2716 0.0512 0.0512 (14.2) (6.9) (1.3) (1.3) T ±10% 0.0394 (1.0) 0.0394 (1.0) 1100 Series – Right Angle Shapes with Rib – MIL Style The style provides strain relief for harness systems when used in conjunction with the backshell (see page 13) Dimensions apply to all materials unless otherwise indicated Fully recovered form (after heating) Expanded (Min) Hellermann Part No 1108-4-G-WM250 1106-4-G-WM250 Recovered (Max) H JØ H JØ 0.6496 (16.5) 0.9173 (23.3) 0.6496 (16.5) 0.9173 (23.3) 0.3110 (7.9) 0.4094 (10.04) 0.1496 (3.8) 0.2204 (5.6) 25 P ±10% 0.6875 (17.3) 0.7992 (20.3) Recovered Dimensions Fully Shrunk R S Jo W ±10% ±10% ±10% ±20% 0.7969 0.6005 0.1614 0.0394 (20.1) (15.2) (4.1) (1.0) 0.9015 0.6005 0.2283 0.0511 (22.9) (15.2) (5.8) (1.3) T ±20% 0.0394 (1.0) 0.0394 (1.0) SCE Plug to Header Cable Assemblies 20GB-SCE-6XXX-XXX Jam Nut Plug Rear Mount to Header Assembly – Solder Bucket Contacts only MATING HALF CONNECTOR RS-311-6546 P1 P2 VARIANT 025 050 075 100 125 150 LENGTH 25MM 50MM 75MM 100MM 125MM 150MM Please contact Amphenol for full part numbering information Panel Nut - Torque to 2.25Nm = 1.65 foot lbs force 20GB- SCE-6XXX-XXX Jam Nut Plug Front Mount to Header Assembly – Solder Bucket Contacts only LENGH IN MM XXX – SEE TABLE MATING HALF CONNECTOR RS-311-6546 P1 VARIANT 025 050 075 100 125 150 P2 LENGTH 25MM 50MM 75MM 100MM 125MM 150MM Please contact Amphenol for full part numbering information Panel Nut -Torque to 2.25Nm = 1.65 foot lbs force 26 SCE - Cable Assemblies Amphenol can supply complete overmoulded cable harness solutions to your specifications. Please consult factory for cable number allocation. Up to 7 Way Single-Ended Receptacle Cable Assembly XXX METRES LOCATOR RIB END OF CABLE TO BE CUT FLUSH NOTES: 1. THE MAIN KEY OF THE CONNECTOR IS TO BE IN LINE WITH THE LOCATION RIB ON THE OVERMOULD 2. ALL DIMENSIONS ARE FOR REFERENCE ONLY 3. XXX.X IN PART NUMBER DENOTES CABLE LENGTH IN METRES E.G. 5.5M = 005.5 PART NUMBER INFORMATION 20GB SCE - 5XXX - XXX.X CONNECTOR SERIES CABLE LENGTH TECHNICAL DESCRIPTION - CONSULT FACTORY All Dimensions are for reference only (Dimensions in brackets are in mm) Up to 7 Way Double-Ended Receptacle to Receptacle Cable Assembly XXX METRES P1 LOCATOR RIB LOCATOR RIB P2 NOTES: 1. THE MAIN KEY OF THE CONNECTOR IS TO BE IN LINE WITH THE LOCATION RIB ON THE OVERMOULD 2. ALL DIMENSIONS ARE FOR REFERENCE ONLY 3. XXX.X IN PART NUMBER DENOTES CABLE LENGTH IN METRES E.G. 5.5M = 005.5 PART NUMBER INFORMATION 20GB SCE - 5XXX - XXX.X CONNECTOR SERIES CABLE LENGTH TECHNICAL DESCRIPTION - CONSULT FACTORY 27 SCE - Cable Assemblies Up to 7 Way Single-Ended Receptacle Coiled Cable Assembly XXX METRES MIN 90MM REF P1 P2 LOCATOR RIB END OF CABLE TO BE CUT FLUSH NOTES: 1. THE MAIN KEY OF THE CONNECTOR IS TO BE IN LINE WITH THE LOCATION RIB ON THE OVERMOULD 2. ALL DIMENSIONS ARE FOR REFERENCE ONLY 3. XXX.X IN PART NUMBER DENOTES CABLE LENGTH IN METRES E.G. 5.5M = 005.5 PART NUMBER INFORMATION 20GB SCE - 5XXX - XXX.X CONNECTOR SERIES CABLE LENGTH TECHNICAL DESCRIPTION CONSULT FACTORY All Dimensions are for reference only (Dimensions in brackets are in mm) Up to 7 Way Double-Ended Receptacle to Receptacle Coiled Cable Assembly XXX METRES MIN 90MM REF P1 P2 LOCATOR RIB NOTES: 1. THE MAIN KEY OF THE CONNECTOR IS TO BE IN LINE WITH THE LOCATION RIB ON THE OVERMOULD 2. ALL DIMENSIONS ARE FOR REFERENCE ONLY 3. XXX_X IN PART NUMBER DENOTES CABLE LENGTH IN METRES E.G. 5.5M = 005.5 PART NUMBER INFORMATION 20GB SCE - 5XXX - XXX.X CONNECTOR SERIES CABLE LENGTH TECHNICAL DESCRIPTION - CONSULT FACTORY 28 SCE Connector Part Numbers – Receptacles only SCE - B - X X X X X - XX X X - XXX Series Cable Variant -003 for 01T only Plating B – Black Silver – Standard Plating (RoHS compliant) F – Electroless Nickel (RoHS compliant) M – Black Zinc Cobalt W – Cadmium Olive Drab Keyway Orientation N – Normal A B C D Style 01T – Receptacle, Threaded Shell with backshell only 01K – Receptacle, Snatch with Integral backshell L1K – Receptacle, Latch with Integral backshell 07A – Receptacle, Rear Mount Jam Nut 17A – Receptacle, Front Mount Jam Nut 20A – Receptacle, two-hole mount 00A – Receptacle, four-hole mount Contact Style P – Pin Contacts only Number of Contacts Please see Insert arrangements 05 - 5 contacts 06 - 6 contacts 07 - 7 contacts 12 - 12 contacts 14 - 14 contacts 10A - 8 signal 2 power * 19 - 19 contacts Shell Size 06 07 08 * Please consult factory. Note: If ordering 01K and L1K receptacles, please omit the cable variant from the part number. 29 SCE Connector Part Numbers – Plugs only SCE - B - X X X X X - XX X X - XXX Series Contacts 001 – PCB 002 – Solder Bucket Plating B – Black Silver – Standard Plating (RoHS compliant) F – Electroless Nickel (RoHS compliant) M – Black Zinc Cobalt W – Cadmium Olive Drab Style 76A – 06T 06K 67A - Keyway Orientation N – Normal A B C D Contact Style S – Socket Contacts only Rear Mount Jam Nut Plug In-Line Plug with Backshell In-Line Plug with Integral Backshell Front Mount Jam Nut Plug Number of Contacts Please see Insert arrangements 05 - 5 contacts 06 - 6 contacts 07 - 7 contacts 12 - 12 contacts 14 - 14 contacts 10A - 8 signal 2 power * 19 – 19 contacts Shell Size 06 07 08 * Please consult factory. Note: For castellated panel nut, please add (981) at the end of plug part number 30 SCE Crimp Tool For Braid Termination Style 003 July 2006 Crimp the Braid into place so that the ferrule butts up against the shoulder of the backshell. Use crimp tool Daniels HX4 M22520/5-01 handle, crimp die set Daniels Y530 CAGE 11851 at setting 180. Notice: Products are sold subject to Amphenol’s Standard Conditions of Sale. All specifications and statements contained herein are believed to be correct at the time of printing but no representation or warranty, express or implied, is given as to any specification or statement contained herein. Product specifications including performance characteristics are typical only and subject to deviation. Specifications are also subject to change without notice. Users should not assume that all safety measures are indicated or that other measures may not be required. No representation or warranty, express or implied, is given that any use of products (including any stated or suggested use) does not infringe any patent, registered design or other third party rights and no stated or suggested use of products can be taken to recommend any such infringement. Amphenol PCD 2 Technology Drive, Peabody, MA 01960, USA – Tel: 978 532 8800 31