SCE2-B-76A06-07SN-001

Miniature Rugged Connector Series Contents Intended for harsh environment applications and used extensively in soldier communications, Amphenol Terrapin is a miniature series of circular push-pull connectors. Within a rugged shell design Terrapin offers superior EMC performance and high environmental sealing to IP68. Resilient in severe battlefield situations the RoHS compliant black-silver plating is both low-luster and corrosion resistant. Featuring an optional locking mechanism, multiple shell sizes with up to 37 contacts and suitability for overmolding, Terrapin is the preferred choice for miniature connectors in military and other harsh environment applications. Terrapin shells are machined from brass giving an increased number of mating cycles and higher degree of robustness over traditional aluminium connectors. Five different keying options are available to prevent mis-mating; N, A, B, C and D. Standard plating is non-reflective black-silver, alternative plating finishes are available upon request. Terrapin is available in two different styles of mating; either push-pull, being a break-away connector with no moving parts, or latch, which has an additional coupling ring allowing connections to be locked together. The same plug can be mated to either push-pull or latch receptacles. Both styles of product are waterproof to IP68 in both their mated and unmated conditions. Amphenol offers a full range of cable harness solutions with standard or customized overmolding. Alternatively, for field 2 TERRAPIN SERIES termination, both integral and threaded backshell connectors can be terminated with screen retention straps and heatshrink boots giving full 360˚ screening. Terrapin terminology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terrapin mating options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terrapin PART NUMBERING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terrapin performance information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terrapin insert availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4 5 6 7 Contents Miniature Rugged Connector Series Plugs Table of styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76A Rear Mount Jam Nut Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67A Front Mount Jam Nut Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06K Inline Plug Integral Backshell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06T Inline Plug Threaded Backshell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76T Rear Mount Jam Nut Plug (Screw On Backshell) . . . . . . . . . . . . . . . . . . . . . . . . 8 9 10 11 12 13 Receptacles The customized design specification of Terrapin lends itself to a variety of applications. Originally designed for soldier mounted applications such as Radios, Headsets and GPS units, Terrapin is also suitable for Gigabit Ethernet and USB 2.0 and therefore widely used on Computer Systems, LAN Switches and Routers. The high degree of sealing offered by Terrapin makes it perfect for Unmanned Ground Sensors and Surveillance equipment. Whatever the application, Terrapin offers space savings and improved durability over traditional interconnect products. Table of styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01K Inline Receptacle, Integral Backshell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L1K Inline Latching Receptacle, Integral Backshell . . . . . . . . . . . . . . . . . . . . . . . . . . 01T Inline Receptacle, Threaded Backshell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L1T Inline Latching Receptacle, Threaded Backshell. . . . . . . . . . . . . . . . . . . . . . . . . 07A Rear Mount Jam Nut Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71A Front Mount Receptacle, Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 15 16 17 18 19 20 Accessories Cap assembly part numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390-5057 Metal Dust Cap Assembly for Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390-5056 Metal Dust Cap Assembly for Receptacles. . . . . . . . . . . . . . . . . . . . . . . . . 390-5064 Rubber Dust Cap Assembly for Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390-5063 Rubber Dust Cap Assembly for Receptacles . . . . . . . . . . . . . . . . . . . . . . . Overmolded cable harnesses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 22 23 24 25 26 TERRAPIN SERIES 3 Terrapin terminology and mating options Terrapin terminology Terrapin part numbering Example: SCE2–B–76A06–07SN–002 | (985) for optional grounding spring in L1K and L1T | (981) castellated panel nut L1K Crimp ferrule SCE2– B– XXX XX– XX –X X– XXX Series identifier Style Plugs 76A 67A 06K 06T 76T Receptacles 01K L1K 01T L1T 07A 71A Shell size and number of contacts 06–07 07–10A 07–12 07–14 08–19 09–26 10–37 (See page 7) Contact style P = Pins S = Sockets Key orientation N = Normal A B C D (See diagrams below) Variant code 001 PC Tails 002 Solder Buckets 003 Backshell Plating finish B = Black Silver (RoHS) Integral backshell for direct screen termination Body Backshell 01K Coupling ring Integral backshell Terrapin mating options Chassis Mount Plug SCE2-B-76A Terrapin part numbering L1T Terrapin plug and receptacle keyway orientation Push-pull Inline Receptacle SCE2-B-01K The same chassis mount plug will mate with both push-pull and latch receptacles Latch Inline Receptacle SCE2-B-L1K Keyway orientation letter PLUG keyway orientation RECEPTACLE keyway orientation Keyway orientation letter N C A D PLUG keyway orientation RECEPTACLE keyway orientation B 4 TERRAPIN SERIES TERRAPIN SERIES 5 Test/parameter Description Terrapin insert availability Shell size Electrical Current Rating Shell to Shell Continuity Contact Resistance Insulation Resistance Working Voltage Dielectric Withstanding Voltage View shown for reference / View from rear of plug* 23 AWG contacts: 3A d.c. 20 AWG contacts: 7.5A d.c. 10mΩ max (screened) 200mΩ max (unscreened) Size 20 and 23 contacts: 5mΩ initial 10mΩ maximum 5000MΩ minimum AC (RMS) 400V 2mA maximum leakage 06 07 08 09 10 06–07 07–10A 08–19 09–26 10–37 Terrapin insert availability Terrapin performance information Terrapin performance information 07–12 Technical Mating Durability Backshell Overtorque Panel Nut Overtorque Non-magnetic 2000+ cycles 25 lb.f.in. 30 lb.f.in. Yes Environmental Operating Temperature Range Temperature Endurance Sealing (mated and unmated) Air Leakage Salt Spray Altitude Immersion RoHS Compliant Suitable for RoHS compliant Soldering -55°C to +125°C 250 hours +125°C IP68, 1 hour at 2 metres* Less than 1cc per hour 1000 hours 70,000 Feet Yes Yes *Contact the factory if greater depth/duration of sealing is required 07–14 쎻 쏹 23AWG contacts 20AWG contacts *View from rear of receptacle is mirror image of above. 6 TERRAPIN SERIES TERRAPIN SERIES 7 Plug SCE2-X-76A SCE2-X-76AXX-XXSX-XXX Page 9 쮿 Rear Mount Jam Nut Plug Plug Plugs – table of styles Plugs – table of styles SCE2-X-67A Page 10 SCE2-X-06K Page 11 SCE2-X-06T Page 12 (-001) SCE2-X-76T Page 13 Shell Size ØF ØH K L M N P S A/F T Max Size 06 Size 07 Size 08 Size 09 Size 10 .550 (13.97) .600 (15.24) .760 (19.30) .830 (21.08) .900 (22.86) .716 (18.19) .716 (18.19) .716 (18.19) .802 (20.37) .802 (20.37) .655 (16.64) .655 (16.64) .655 (16.64) .725 (18.42) .725 (18.42) .055 (1.40) .055 (1.40) .055 (1.40) .N/A .N/A .155 (3.94) .155 (3.94) .155 (3.94) .085 (2.16) .085 (2.16) .170 (4.32) .170 (4.32) .170 (4.32) .100 (2.54) .100 (2.54) .470 (11.94) .510 (12.95) .706 (17.93) .745 (18.92) .808 (20.52) .118 (3.00) .118 (3.00) .118 (3.00) .118 (3.00) .125 (3.18) .550 (13.97) .620 (15.75) .760 (19.30) .890 (22.61) .930 (20.62) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 8 TERRAPIN SERIES TERRAPIN SERIES 9 Plug Plug SCE2-X-06KXX-XXSX 쮿 Front Mount Jam Nut Plug 쮿 Inline Plug Integral Backshell Plug Plug SCE2-X-67AXX-XXSX-XXX Shell Size ØF ØH L M N P S A/F T Max Shell Size ØF ØH ØJ K L M T Size 06 Size 07 Size 08 Size 09 Size 10 .590 (14.99) .620 (15.75) .760 (19.30) .890 (22.61) .930 (23.62) .592 (13.04) .592 (13.04) .592 (13.04) .662 (16.82) .662 (16.82) .324 (8.23) .324 (8.23) .324 (8.23) .254 (6.45) .254 (6.45) .279 (7.09) .279 (7.09) .279 (7.09) .209 (5.31) .209 (5.31) .424 (10.78) .424 (10.78) .424 (10.78) .354 (8.99) .354 (8.99) .525 (13.34) .685 (17.40) .825 (20.96) .955 (24.26) .995 (25.27) .100 (2.54) .100(2.54) .100 (2.54) .100 (2.54) .100 (2.54) Size 06 Size 07 Size 08 Size 09 Size 10 .412 (10.46) .460 (11.68) .593 (15.06) .651 (16.54) .721 (18.31) .440 (11.18) .505 (12.83) .620 (15.75) .690 (17.53) .760 (19.30) .862 (21.89) .862 (21.89) .862 (21.89) .932 (23.67) .932 (23.67) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .590 (14.99) .620 (15.75) .760 (19.30) .890 (22.61) .930 (23.62) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 10 TERRAPIN SERIES .495 (12.57) .575 (14.61) .650 (16.51) .725 (18.42) .800 (20.32) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 11 Plug Plug SCE2-X-76TXX-XXSX-XXX 쮿 Inline Plug Threaded Backshell 쮿 Rear Mount Jam Nut Plug (Screw On Backshell) Plug Plug SCE2-X-06TXX-XXSX-003 Backshell ID Shell Size ØH ØJ K L M S A/F T Max Size 06 Size 07 Size 08 Size 09 Size 10 .490 (12.45) .645 (16.83) .770 (19.56) .830 (21.08) .900 (22.86) 1.150 (29.21) 1.150 (29.21) 1.150 (29.21) 1.220 (30.99) 1.220 (30.99) .655 (16.64) .655 (16.64) .655 (16.64) .725 (18.42) .725 (18.42) .330 (8.38) .330 (8.38) . .330 (8.38) .330 (8.38) .330 (8.38) .470 (11.94) 510 (12.95) .706 (17.93) .745 (18.92) .808 (20.52) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) Shell Size ØF K L T -003 Size 06 Size 07 Size 08 Size 09 Size 10 1.292 (32.82) 1.292 (32.82) 1.292 (32.82) 1.362 (34.60) 1.362 (34.60) .451 (11.46) .451 (11.46) .451 (11.46) .521 (13.23) .521 (13.23) .141 (3.58) .141 (3.58) .141 (3.58) .141 (3.58) .141 (3.58) .185 (4.70) .265 (6.73) .345 (8.76) .425 (10.80) .505 (12.83) .550 (13.97) .630 (16.00) .705 (17.91) .780 (19.81) .855 (21.72) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 12 TERRAPIN SERIES .460 (11.68) .600 (15.24) .730 (18.54) .790 (20.07) .860 (21.84) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 13 Receptacles – table of styles Receptacle SCE2-X-01KXX-XXPX Page 15 쮿 Inline Receptacle, Integral Backshell Receptacle Receptacle SCE2-X-01K SCE2-X-L1K Page 16 SCE2-X-01T Page 17 SCE2-X-L1T Page 18 SCE2-X-07A Page 19 SCE2-X-71A Page 20 Shell Size ØF ØH ØJ K L M N Size 06 Size 07 Size 08 Size 09 Size 10 .399 (10.13) .460 (11.68) .581 (14.76) .651 (16.54) .721 (18.31) .440 (11.18) .505 (12.83) .620 (15.75) .690 (17.53) .760 (19.30) .900 (22.86) .900 (22.86) .900 (22.86) .970 (24.64) .970 (24.64) .525 (13.34) .525 (13.34) .525 (13.34) .525 (13.34) .525 (13.34) .330 (8.38) .330 (8.38) .330 (8.38) .400 (10.16) .400 (10.16) .090 (2.29) .090 (2.29) .090 (2.29) .020 (0.51) .020 (0.51) .462 (11.73) .575 (14.61) .620(15.75) .691 (17.55) .761 (19.33) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 14 TERRAPIN SERIES TERRAPIN SERIES 15 Receptacle Receptacle SCE2-X-01TXX-XXPX-003 쮿 Inline Latching Receptacle, Integral Backshell 쮿 Inline Receptacle, Threaded Backshell Receptacle Receptacle SCE2-X-L1KXX-XXPX Shell Size ØF ØH ØJ K L M N Size 06 Size 07 Size 08 Size 09 Size 10 .399 (10.14) .447 (11.35) .581 (14.75) .651 (16.54) .721 (18.31) .440 (11.18) .505 (12.83) .620 (15.75) .690 (17.53) .760 (19.30) .902 (22.91) .902 (22.91) .902 (22.91) .972 (24.69) .972 (24.69) .527 (13.39) .527 (13.39) .527 (13.39) .527 (13.39) .527 (13.39) .330 (8.38) .330 (8.38) .330 (8.38) .400 (10.16) .400 (10.16) .090 (2.29) .090 (2.29) .090 (2.29) .090 (2.29) .090 (2.29) .540 (13.75) .610 (15.50) .699 (17.75) .770 (19.56) .840 (21.34) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 16 TERRAPIN SERIES Backshell ID Shell Size ØF K L T -003 Size 06 Size 07 Size 08 Size 09 Size 10 1.377 (34.98) 1.377 (34.98) 1.377 (34.98) 1.447 (36.75) 1.447 (36.75) .674 (17.12) .674 (17.12) .674 (17.12) .674 (17.12) .674 (17.12) .272 (6.91) .272 (6.91) .272 (6.91) .272 (6.91) .272 (6.91) .185 (4.70) .265 (6.73) .345 (8.76) .425 (10.80) .505 (12.83) .462 (11.73) .575 (14.61) .620 (15.75) .690 (17.53) .760 (19.30) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 17 Receptacle Receptacle SCE2-X-07AXX-XXPX-XXX 쮿 Inline Latching Receptacle, Threaded Backshell 쮿 Rear Mount Jam Nut Receptacle Receptacle Receptacle SCE2-X-L1TXX-XXPX-003 Backshell ID Shell Size ØF ØH ØJ K L M N P S A/F T Max Size 06 Size 07 Size 08 Size 09 Size 10 .462 (11.73) .575 (14.61) .620 (15.75) .690 (17.53) .760 (19.30) .750 (19.05) .895 (22.73) .930 (23.62) 1.005 (25.53) 1.080 (27.43) .835 (21.21) .835 (21.21) .835 (21.21) .905 (22.99) .905 (22.99) .738 (18.75) .738 (18.75) .738 (18.75) .808 (20.52) .808 (20.52) .055 (1.40) .055 (1.40) .055 (1.40) .N/A .N/A .155 (3.94) .155 (3.94) .155 (3.94) .080 (2.03) .080 (2.03) .170 (4.42) .170 (4.42) .170 (4.42) .170 (4.42) .170 (4.42) .672 (17.07) .750 (19.05) .825 (20.96) .900 (22.86) .975 (24.77) .157 (4.45) .157 (4.45) .157 (4.45) .157 (4.45) .157 (4.45) Shell Size ØF K L T -003 Size 06 Size 07 Size 08 Size 09 Size 10 1.379 (35.03) 1.379 (35.03) 1.379 (35.03) 1.449 (36.80) 1.449 (36.80) .674 (17.12) .674 (17.12) .674 (17.12) .674 (17.12) .674 (17.12) .465 (11.81) .465 (11.81) .465 (11.81) .465 (11.81) .465 (11.81) .185 (4.70) .265 (6.73) .345 (8.76) .425 (10.80) .505 (12.83) .538 (13.67) .610 (15.50) .699 (17.75) .770 (19.56) .840 (21.34) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 18 TERRAPIN SERIES .750 (19.05) .895 (22.73) .930 (23.62) 1.005 (25.53) 1.080 (27.43) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 19 Accessories Cap assembly part numbering 쮿 Front Mount Receptacle, Threaded Example: 390-5056-06-130-02 | See Pages 22-25 for drawings Receptacle SCE2-X-71AXX-XXPX-XXX 390– XXXX– XX– XXX– XX Series identifier Cap style 5056 Metal for receptacle 5057 Metal for plug 5063 Rubber for receptacle 5064 Rubber for plug Shell size 06 07 08 09 10 Cord length in mm 060 130 180 Accessories 01 02 03 04 05 See table on pages 22-25 Accessories Receptacle Heatshrink Boots 쮿 Part number: 123GB-0798-XX-X-0 XX = shell size, for example: 06, 07, 08, 09, or 10 X = S for straight or R for right angled Braid Retention Strap 쮿 Part number: 123GB-0799-0 Tooling available on request Castellated Panel Nut 쮿 Add deviation (981) Tooling available on request Shell Size ØF ØJ ØH K L M N P S A/F T Size 06 Size 07 Size 08 Size 09 Size 10 .462 (11.73) .575 (14.61) .620 (15.75) .690 (17.53) .760 (19.30) .590 (14.99) .620 (15.75) .760 (19.30) .890 (22.61) .930 (20.62) .877 (22.28) .877 (22.28) .877 (22.28) .947 (24.05) .947 (24.05) .677 (17.20) .677 (17.20) .677 (17.20) .747 (18.97) .747 (18.97) .015 (0.38) .015 (0.38) .015 (0.38) .N/A .N/A .113 (2.87) .113 (2.87) .113 (2.87) .113 (2.87) .113 (2.87) .130 (3.30) .130 (3.30) .130 (3.30) .060 (1.52) .060 (1.52) .525 (13.34) .685 (17.40) .825 (20.96) .955 (24.26) .995 (25.27) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .590 (14.99) .620 (15.75) .760 (19.30) .890 (22.61) .930 (20.62) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 20 TERRAPIN SERIES TERRAPIN SERIES 21 Accessories Accessories 390-5056-XX-XXX-XX 쮿 Metal Dust Cap Assembly for Plugs 쮿 Metal Dust Cap Assembly for Receptacles Accessories Accessories 390-5057-XX-XXX-XX Shell size Part number 06 07 08 09 10 390-5057-06-XXX-XX 390-5057-07-XXX-XX 390-5057-08-XXX-XX 390-5057-09-XXX-XX 390-5057-10-XXX-XX Item 1 Cap Shell size Part number Supplied with ØF K Part number .464 (11.79) .545 (13.84) .620 (15.75) .695 (17.65) .770 (19.56) .794 (20.17) .794 (20.17) .794 (20.17) .794 (20.17) .794 (20.17) 390-5057-XX-XXX-01 390-5057-XX-XXX-02 390-5057-XX-XXX-03 390-5057-XX-XXX-04 390-5057-XX-XXX-05 Item 5 Eyelet Item 6 Item 7 Crimp ferrule Large eyelet – – 1 1 – All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 22 TERRAPIN SERIES – 1 – 1 – – – – – 1 06 07 08 09 10 390-5056-06-XXX-XX 390-5056-07-XXX-XX 390-5056-08-XXX-XX 390-5056-09-XXX-XX 390-5056-10-XXX-XX Supplied with Item 1 Cap ØF K Part number .575 (14.61) .575 (14.61) .750 (19.05) .825 (20.95) .900 (22.86) .664 (16.87) .664 (16.87) .664 (16.87) .664 (16.87) .664 (16.87) 390-5056-XX-XXX-01 390-5056-XX-XXX-02 390-5056-XX-XXX-03 390-5056-XX-XXX-04 390-5056-XX-XXX-05 Item 5 Eyelet Item 6 Item 7 Crimp ferrule Large eyelet – – 1 1 – – 1 – 1 – – – – – 1 All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 23 Accessories Accessories 390-5063-XX-XXX-XX 쮿 Rubber Dust Cap Assembly for Plugs 쮿 Rubber Dust Cap Assembly for Receptacles Accessories Accessories 390-5064-XX-XXX-XX Shell size Part number 06 07 08 09 10 390-5064-06-XXX-XX 390-5064-07-XXX-XX 390-5064-08-XXX-XX 390-5064-09-XXX-XX 390-5064-10-XXX-XX Item 1 Cap Shell size Part number Supplied with ØF K Part number .450 (11.43) .525 (13.34) .595 (15.11) .665 (16.89) .735 (18.67) .550 (13.97) .550 (13.97) .550 (13.97) .550 (13.97) .550 (13.97) 390-5064-XX-XXX-01 390-5064-XX-XXX-02 390-5064-XX-XXX-03 390-5064-XX-XXX-04 390-5064-XX-XXX-05 Item 5 Eyelet Item 6 Item 7 Crimp ferrule Large eyelet – – 1 1 – All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 24 TERRAPIN SERIES – 1 – 1 – – – – – 1 06 07 08 09 10 390-5063-06-XXX-XX 390-5063-07-XXX-XX 390-5063-08-XXX-XX 390-5063-09-XXX-XX 390-5063-10-XXX-XX Item 1 Cap Supplied with ØF K Part number .450 (11.43) .525 (13.34) .595 (15.11) .665 (16.89) .735 (18.67) .550 (13.97) .550 (13.97) .550 (13.97) .550 (13.97) .550 (13.97) 390-5063-XX-XXX-01 390-5063-XX-XXX-02 390-5063-XX-XXX-03 390-5063-XX-XXX-04 390-5063-XX-XXX-05 Item 5 Eyelet Item 6 Item 7 Crimp ferrule Large eyelet – – 1 1 – – 1 – 1 – – – – – 1 All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 25 Accessories Notes Overmolded cable harnesses using Terrapin connectors Amphenol design, prototype and manufacture a wide range of both standard and customized cable harness assemblies utilizing overmold technology. The Terrapin connector range has been designed specifically to lend itself to this method of termination. Amphenol’s capability in manufacturing is matched by our engineering expertise; we are able to offer a full design and development service from drawing conception to production delivery. Overmolding has fast become widely recognized for the benefits it brings to equipments used in both military and harsh environment situations. Military/harsh environment situations • Both standard and custom profile moldings available • In-house design and prototype facility • Aesthetically uniform product • Repeatable high complexity moldings • Low cost and repair by replacement • Robust and tamper-proof • Straight and angled moldings • Low profile moldings • Finger grips, logos and tactile indicators optional • Mold material suitable for NBC washdown • High degree of sealing – IP68 26 TERRAPIN SERIES Typical applications • • • • • • • • • • • • • Chemical detection units Comms units Display modules GPS Headsets Hubs LAN Switches Radios Routers Ruggedized laptops Sensor units Surveillance and rangefinders Weapons systems TERRAPIN SERIES 27 BWC 2882 11/10 Products are sold subject to Amphenol’s conditions of sale (“the standard conditions”). All specifications and statements contained herein are believed to be correct at the time of printing, but no representation or warranty, express or implied, is given as to any specification or statement contained herein. Product specifications including performance characteristics are typical only and subject to deviation. Specifications are also subject to change without notice. Users should not assume that all safety measures are indicated or that other measures may not be required. No representation or warranty, express or implied, is given that any use of products (including any stated or suggested use) does not infringe any patent, registered design or other third party rights and no stated or suggested use of products can be taken to recommend any such infringement. For more information call 978-624-3400 Amphenol PCD 72 Cherry Hill Beverly MA 01915 USA | Email: terrapin@amphenolpcd.com | www.amphenolpcd.com November 2010