GE
Sensing
Features
• Precision, solid state temperature sensor
• Interchangeability down to ±0.18°F (±0.1°C)
• Suitable for use over a range of -112°F to 302°F
(–80°C to 150°C)
• High sensitivity, greater than –4%/°C at 77°F (25°C)
• Suitable for temperature measurement, control and
compensation
• High reliability and stability over an interchangeable
range
• Most popular Resistance (R) vs Temperature (T) curves
are available
• Resin-coated for good mechanical strength and
resistance to solvents
• Rugged construction
• For DC95: .012 in (0.3mm) diameter bare tinned-copper
lead wires
• For EC95: .008 in (0.2mm) diameter bare tinned-alloy
lead wires
• For TK95: .010 in (.25mm) diameter PTFE insulated lead
wires
NTC Interchangeable
Type 95 Series
Thermometrics
Thermistors
Types DC95 and EC95
NTC Interchangeable Type 95 Series
are Thermometrics products.
Thermometrics has joined other GE
high-technology sensing businesses
under a new name—
GE Industrial, Sensing.
g
Type TK95
GE
Sensing
Type DC95
Specifications
NTC Interchangeable Thermistor Chip
Epoxy-coated, NTC interchangeable thermistor chips with
bare tinned-copper lead wires.
Options
Consult Factory for Availability of Options
• Other resistance values in the range of
1000 Ω to 100 kΩ
• Other tolerances or ranges
• Alternative lead wires or lengths
• Non standard R vs T curves
• Controlled dimensions
• Special sensor assemblies or enclosures
Thermal and Electrical Properties
Dissipation Constant
Still air:
1 mW/°C
Stirred oil:
8 mW/°C
Thermal Time Constant
Still air:
10 seconds
Stirred oil:
1 second
Maximum Power at 77°F (25°C)
75 mW
De-rated from 100% at 77°F (25°C) to 0% at 212°F (100°C)
1.5 in (38.1 mm)
Tinned-copper alloy leads
0.012 in (0.3 mm)
Epoxy-coated
thermistor chip
Ø 0.095 in
(2.4 mm)
maximum
NTC Interchangeable Type DC95 dimensions
Ordering Information
Select appropriate part number below for resistance and temperature
tolerance desired
R25°C
Material
32°F to 158°F
32°F to 158°F
32°F to 212°F
System
(0°C to 70°C)
(0°C to 70°C)
(0 to 100°C)
±0.18°F (±0.1°C)
±0.36°F (±0.2°C)
±0.36°F (±0.2°C)
2000
F
DC95F202V
DC95F202W
DC95F202Z
2252
F
DC95F232V
DC95F232W
DC95F232Z
3000
F
DC95F302V
DC95F302W
DC95F302Z
5000
F
DC95F502V
DC95F502W
DC95F502Z
10000
F
DC95F103V
DC95F103W
DC95F103Z
10000
Y
DC95Y103V
DC95Y103W
DC95Y103Z
30000
H
DC95H303V
DC95H303W
DC95H303Z
50000
G
DC95G503V
DC95G503W
DC95G503Z
100000
Y
DC95Y104V
DC95Y104W
DC95Y104Z
100000
G
DC95G104V
DC95G104W
DC95G104Z
GE
Sensing
Type EC95
Specifications
NTC Interchangeable Thermistor Chip
Epoxy-coated, NTC interchangeable thermistor chips with
bare tinned 180 alloy lead-wires.
Options
Consult Factory for Availability of Options
• Other resistance values in the range of
1000 Ω to 100 kΩ
• Other tolerances or ranges
• Alternative lead-wires or lengths
• Non standard R vs T curves
• Controlled dimensions
• Special sensor assemblies or enclosures
Thermal and Electrical Properties
Dissipation Constant
Still air:
1 mW/°C
Stirred oil:
8 mW/°C
Thermal Time Constant
Still air:
10 seconds
Stirred oil:
1 second
Maximum Power at 77°F (25°C)
75 mW
De-rated from 100% at 77°F (25°C) to 0% at 212°F (100°C)
2.5 in (63.5 mm)
Tinned alloy 180 leads
Ø 0.008 in (0.20 mm)
Epoxy-coated
thermistor chip
Ø 0.095 in
(2.4 mm)
maximum
NTC Interchangeable Type EC95 dimensions
Ordering Information
Select appropriate part number below for resistance and temperature
tolerance desired
R25°C
Material
-4°F to 122°F
32°F to 158°F
32°F to 158°F
System
(-20°C to 50°C)
(0°C to 70°C)
(0°C to 70°C)
±0.36°F (±0.2°C)
±0.36°F (±0.2°C)
±0.36°F (±0.2°C)
1000
R
EC95R102U
EC95R102W
1000
S
EC95S102U
EC95S102W
2252
F
EC95F232U
EC95F232V
EC95F232W
3000
F
EC95F302U
EC95F302V
EC95F302W
5000
F
EC95F502U
EC95F502V
EC95F502W
10000
F
EC95F103U
EC95F103V
EC95F103W
10000
Y
EC95Y103U
EC95Y103V
EC95Y103W
30000
H
EC95H303U
EC95H303V
EC95H303W
50000
G
EC95G503U
EC95G503V
EC95G503W
100000
G
EC95G104V
EC95G104W
GE
Sensing
Type TK95
Specifications
0.27 in
(7 mm)
maximum
Ø 0.01 in
(0.25 mm)
±0.001
Ø 0.094 in
(2.4 mm)
maximum
Ø 0.025 in
(0.65 mm)
maximum
Insulated Lead NTC Interchangeable
Thermistor Chip
Ø 0.094 in
(2.4 mm)
maximum
Epoxy-coated, NTC interchangeable thermistor chips with
PTFE insulated nickel lead-wires.
0.195 in (5 mm) ±0.04
Options
NTC Interchangeable Type TK95 dimensions
3 in (76 mm)
Consult Factory for Availability of Options
• Other resistance values in the range of
1000 Ω to 100 kΩ
• Other tolerances or ranges
• Alternative lead wires or lengths
• Non standard R vs T curves
• Controlled dimensions
• Special sensor assemblies or enclosures
Thermal and Electrical Properties
Dissipation Constant
Still air:
1 mW/°C
Stirred oil:
8 mW/°C
Ordering Information
Select appropriate part number below for resistance and temperature
tolerance desired
R25°C
Material
32°F to 158°F 32°F to 158°F
32°F to 212°F
system
(0°C to 70°C)
(0°C to 70°C)
(0°C to 100°C)
±0.18°F (±0.1°C) ±0.36°F (±0.2°C) ±0.36°F (±0.2°C)
2000
F
TK95F202V
TK95F202W
TK95F202Z
2252
F
TK95F232V
TK95F232W
TK95F232Z
3000
F
TK95F302V
TK95F302W
TK95F302Z
5000
F
TK95F502V
TK95F502W
TK95F502Z
10000
F
TK95F103V
TK95F103W
TK95F103Z
10000
Y
TK95Y103V
TK95Y103W
TK95Y103Z
30000
H
TK95H303V
TK95H303W
TK95H303Z
50000
G
TK95G503V
TK95G503W
TK95G503Z
100000
G
TK95G104V
TK95G104W
TK95G104Z
Thermal Time Constant
Still air:
10 seconds
Stirred oil:
1 second
Maximum Power at 77°F (25°C)
75 mW
De-rated from 100% at 77°F (25°C) to 0% at 212°F (100°C)
g
©2006 GE. All rights reserved.
920-273A
All specifications are subject to change for product improvement without notice.
GE® is a registered trademark of General Electric Co. Other company or product
names mentioned in this document may be trademarks or registered trademarks
of their respective companies, which are not affiliated with GE.
www.gesensing.com
很抱歉,暂时无法提供与“TK95F202W”相匹配的价格&库存,您可以联系我们找货
免费人工找货