Amphenol
High Frequency Contacts
TABLE OF CONTENTS
• Overview of Amphenol’s High Frequency Contacts . . . . . . . . . . . . 213-217
• Cable Systems, Cable Assembly/Testing of Cables. . . . . . . . . . . . . . . . 218
• Cable Usage Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . 219-222
CONCENTRIC
TWINAX
COAXIAL
“Split-Pair”
Quadrax
Contact &
Cable
New
Featured
micro d-twinax
transition adapters
TWINAX
PC TAIL
MIL-DTL-38999 Circular Connector Overview . . . . . . . . . . . . 223
Contacts for MIL-DTL-38999 Connectors:
• Quadrax Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224-226
• New “Split-Pair” Quadrax Contacts. . . . . . . . . . . . . . . . . . . . . 227-230
• Differential Twinax Contacts. . . . . . . . . . . . . . . . . . . . . . . . 231, 232
Compliant Quadrax and PC Tail Quadrax Contacts. . . . . . . . . . . . . . . . 233
• Quadrax Transition & Differential Twinax Transitional Adapters. . . . . . . 234-237
• Micro D-Twinax Transition Adapters. . . . . . . . . . . . . . . . . . . . 238-240
• Insert Arrangements for MIL-DTL-38999, Series III . . . . . . . . . . . . . 241, 242
• How to Order, 38999 Series III with Quadrax 100 ohm Contacts. . . . . . . . . 243
• Coaxial Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244-247
• Matched Impedance Coaxial Contacts. . . . . . . . . . . . . . . . . . . . . 248
• Typical Contact Installation Instructions for Coax Contacts . . . . . . . . . . . 249
• High Frequency Contacts (DC to 40 GHz). . . . . . . . . . . . . . . . . . . . 250
• Twinax Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251-253
• Triax Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254
• Coax, Twinax & Triax PC Tail Contacts. . . . . . . . . . . . . . . . . . . . 255-257
• Insert Arrangements for MIL-DTL-38999 Series III Incorporating Coax,
Twinax and Triax Contacts. . . . . . . . . . . . . . . . . . . . . . . . . 258-260
TRIAX
DIFFERENTIAL
TWINAX
QUADRAX
Standard MIL-DTL-5015 & Heavy Duty MIL-DTL-22992 Circular
Connector Overview. . . . . . . . . . . . . . . . . . .
Contacts for Standard MIL-DTL-5015 & Heavy Duty
MIL-DTL-22992 Connectors:
• Coaxial Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Insert Arrangements for Standard MIL-DTL-5015 and Heavy Duty
MIL-DTL-22992 Incorporating Coax Contacts. . . . . . . . . . . . . .
• Rectangular Rack & Panel Connectors that incorporate High Speed. . . .
• Guide for Selecting High Frequency Contacts and Cables . . . . . . . .
. . . 261
. 262, 263
. . . . 264
. 265, 266
. . . . 267
High Frequency Contacts Typical Markets:
•
•
•
•
212
Military & Commercial Aviation
Military Vehicles
Missiles & Ordnance
C4ISR
Amphenol
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Aerospace
Amphenol
Aerospace
Amphenol® High Frequency Contacts
Provide High Speed Transmission
Operate in High Frequency Conditions
38999
MIL-DTL-38999 CONNECTORS - The high performance series most ideal for integrating high
speed and high frequency contacts. MIL-DTL-38999, Series I, II and III are by far the choice of
connector for today’s avionics needs - these subminiature family connectors are ideally suited for
the incorporation of shielded contacts.
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
This catalog section is primarily devoted to the high speed and high frequency contact options for
use in MIL-DTL-38999 Connectors, which include:
High
Speed
When you need superior electrical performance plus shielding to eliminate
interference from outside electrical sources in a connector, Amphenol has the
most reliable contact solutions.
Amphenol offers a very wide range of contacts that provide high speed transmission and operate
in high frequency conditions. You can be assured of interconnection compatibility when you come
to Amphenol for your contact needs as well as your connector needs. Amphenol’s expertise in
interconnection solutions assures that your contacts will mate properly and will perform to the
application specifications of your particular requirements.
Coaxial
Pin and socket
contacts designed for
protection from
magnetic and electrostatic interference
including nuclear
electromagnetic
pulse. Sizes 8 & 12
Triax
Pin and socket
contacts
designed for
shielded wire
applications
with 3
conductors.
Sizes 8, 10 & 12
Quadrax
Size 8 pin and socket
contacts. An outer
contact with 4
strategically spaced
inner contacts
forming two 100 or
150 Ohm matched
impedance
differential pairs.
Differential
Twinax
Size 8 pin and socket
contacts. An outer
contact with 2 inner
contacts spaced to
form one 100 or 150
Ohm matched
impedance
differential pair.
Transition
Adapters
Size 8 Coaxial
contacts that provide
high frequencies (DC
to 40 GHz). Unique
“Float Mount”
technology maintains
tight mechanical
tolerances.
Matched impedance
quadrax and twinax
transition adapters
provide a method of
launching from the
high speed
connectors to PCB
boards.
Fiber
Optics
Contacts
Connectors
Cables
Matrix|Pyle
83723 III
Pyle
26500
Class L
BackShells
Options
Others
Amphenol provides the latest technology in high speed contacts - differential twinax and quadrax contacts, size 8, for use in MIL-DTL-38999
Special* Circular Connectors.
22992
For more information on connectors with fiber optics see the Fiber Optic
section of this catalog or consult Amphenol Aerospace.
5015
For more information on other Amphenol connectors with shielded contacts:
• Amphenol® Circular Connectors, MIL-DTL-26482, Series 1 are available with coaxial
contacts, size 8 and 12 for crimp and solder type. See catalog 12-070 on-line at www.
amphenol-industrial.com, or consult Amphenol Industrial Operations.
• Amphenol® MS/Standard, MIL-DTL-5015 Circular Connectors
are available with size 4, 8 and 12 coax contacts. Consult
Amphenol Industrial Operations for more information or on-line at
www.amphenol-industrial.com.
Crimp Rear
Release
Matrix
The Cable Usage Guide is a key reference to help guide you in selecting the contacts best suited to
your needs. Since most shielded wire applications start with a fixed requirement for cable types, the
guide refers you to the Amphenol connector family utilizing contacts which are compatible with the
cable characteristics.
26482
See High Frequency
Contact Designer’s
Guide at end
of this catalog.
Matrix 2
Other series of connectors from Amphenol Aerospace, in addition to
38999 connectors, can incorporate shielded contacts. These include the following
(and are also covered in this catalog section):
• Amphenol® Heavy Duty Circular Connectors, MIL-DTL-22992 - with coax contacts.
• Amphenol® Printed Circuit Board Connectors - Rectangular connectors with
standard low mating force brush contacts can have hybrid arrangements with coax contacts.
• LRM Interconnects - Rectangular module and backplane connectors with standard
low mating force brush contacts can have hybrid arrangements with coax contacts.
• Amphenol® ARINC 600 and R27 Rack & Panel Connectors are available with quadrax, coax,
twinax and differential twinax contacts.
High
Frequency
EMI Filter
Transient
Pin and socket
contacts
designed for
RF/microwave
and shielded
wire applications. Sizes 4,
8, 12 & 16
Concentric
Twinax
*Requires modified connector to accommodate keyed contacts.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
213
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
Contacts
5015
Matrix|Pyle
Options
Others
BackShells
Class L
22992
Crimp Rear
Release
Matrix
Pyle
26500
83723 III
26482
Matrix 2
EMI Filter
Transient
Cables
NEW “Split-Pair” Quadrax Contacts & Cable Assemblies for
MIL-DTL-38999, Series III Circular
New/Featured
High
Speed
Connectors
Overview
Amphenol Aerospace offers the high performance interconnect solution for CAT6A type cable.
APPLICATIONS:
• 10/100/1000/10GBASE-T Ethernet
• DVI
• USB 2.0
• Serial Rapid IO (up to 3.125 Gbps)
• PCI-Express 2.0
• HDMI 1.3a
• SATA 2.0 (up to 3 GHz)
See pages 227, 228 for more information
Accessories
Aquacon
Herm/Seal
PCB
Fiber
Optics
High Speed Quadrax and
New Products/Differential Twinax Contacts
MIL-DTL-38999 Series III Connectors
with “Split-Pair” Quadrax Contacts
for use with CAT6A Type Cable
Micro D-Twinax Transition Adapters
Differential Twinax and Quadrax
contacts provide high data transfer
rates, low power consumption, and
excellent EMI capability. They offer
controlled impedance of 100 or 150
Ohm and are ideal for use in harsh
environments.
Amphenol now offers differential twinax transition
adapters in smaller sizes that provide
matched impedance interconnection to PCB boards.
Styles include:
• Plug- standard length and extended length options
• Straight PCB receptacle, 90° PCB receptacle
• Two jam nut receptacle styles -both with standard
length and extended length options
• Bushing assemble 90° adapter (used with plug or
jam nut receptacle)
See pages 238-240 for more information
DIFFERENTIAL
TWINAX CONTACTS
High speed Differential Twinax contacts consist
of an outer contact with two inner contacts
spaced to form one 100 or 150 Ohm controlled
impedance differential pair. See pages 231, 232
for performance data and ordering of Differential
Twinax contacts, and consult Amphenol
Aerospace for more information.
Differential Twinax Contact
D38999 Series III
Ground Plane
Connectors with
Quadrax PCB
Socket contacts
QUADRAX CONTACTS
•
•
•
•
•
•
High speed Quadrax contacts consist of
an outer contact with four inner contacts
spaced to form two 100 or 150 Ohm
controlled impedance differential pair.
Both contacts, when used in Amphenol
MIL-DTL-38999 Series III and ARINC
type connectors, provide an excellent
alternative for harsh environment
applications such as:
Ethernet 100 Base-T-100 Ohm
Gigabit Ethernet 1000 Base-T-100 Ohm
Fibre Channel-150 Ohm
IEEE1394B FireWire-110 Ohm
D38999 Series III
withQuadraxand
Power Contacts
Quadrax Contact
Differential Twinax and Quadrax contact options include:
• Crimp or printed circuit board termination
• Established designs to accommodate a variety of cable types and gages
• Ground plane connectors can incorporate quadrax contacts. These
connections have conductive inserts that ground the outer conductor of
the contact body to the shell of the connector. They accommodate size 8
and 12 shielded contacts of which the size 8 can be quadrax type.
See pages 224-226 for performance data of Quadrax contacts. Consult Amphenol
Aerospace for further information needed.
D38999 Series III
Connectors(standoffshellatrightand
standard shell below) with Quadrax
PC Tail Contacts
* Requires modified connector to accommodate keyed contacts.
214
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Quadrax Contacts, Quadrax Terminators,
Transition Adapters
Amphenol
Aerospace
Overview
38999
QUADRAX CONTACTS
FOR ARINC
CONNECTORS
Amphenol ARINC 600 Rack and Panel
connectors can incorporate high speed
quadrax contacts as well as coax, twinax
and differential twinax contacts. R27 Rack
and Panel connectors use the same
contacts as ARINC 600 connectors. For
more information about rack and panel
connectors contact Amphenol Aerospace.
Quadrax Contact for
ARINC Connectors
Board Level
Connector
with Compliant
Quadrax
Contacts
BOARD LEVEL
CONNECTORS WITH
COMPLIANT QUADRAX
CONTACTS
Amphenol also provides compliant
quadrax socket contacts and quadrax pin
contacts with PC tails for attaching to
printed circuit boards. See page 233 for
more information.
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
High
Speed
Fiber
Optics
Compliant Quadrax Socket and
PCB Tail Quadrax Pin
Contacts
Connectors
Cables
EMI Filter
Transient
FEED-THROUGH CONNECTOR
WITH QUADRAX CONTACTS
Matrix|Pyle
Pyle
26500
Class L
Transition Adapters
BackShells
Options
Others
In conjunction with its Differential Twinax and Quadrax contacts, Amphenol
has developed a full line of Transition Adapters in order to facilitate launching of
controlled impedance signals to printed circuit boards. These use differential twinax
or quadrax 90° or straight receptacles and they can be either threaded or cable to
board direct. The threaded transition adapters provide an ideal method of
disconnecting the differential twinax or quadrax connector from the board.
See pages 234-240 for further description, performance data and ordering of
transition adapters.
90° Differential Twinax
Receptacle and Plug
Transition Adapter
22992
Quadrax Terminator
5015
Crimp Rear
Release
Matrix
Amphenol offers a terminator assembly which is a
low reactance, resistive impedance match to the
characteristic impedance of a transmission line. It
is used to terminate the far ends of a transmission
line or an open tap so that the energy from signals
traveling down the transmission line is absorbed
within the resistor and not reflected back down the
transmission line causing signal interference
(noise). Consult Amphenol for more information.
83723 III
90° Quadrax Receptacle
and Plug Transition
Adapter
Quadrax Terminators
26482
Straight Quadrax
Receptacle Contact
Matrix 2
Amphenol’s feed-through connector is
double-ended for through bulkhead applications.
Consult Amphenol for more information.
Amphenol’s newest addition to their high speed interconnect product offering is Micro
D-Twinax Transition adapters. See page 238-240 for more information.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
215
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
Contacts
5015
Matrix|Pyle
Options
Others
BackShells
Class L
22992
Crimp Rear
Release
Matrix
Pyle
26500
83723 III
26482
Matrix 2
EMI Filter
Transient
Cables
216
Optional choices, other than standard crimp or solder 500 cycle and 1500 cycle
contacts, are often required for high frequency interconnections. Amphenol offers
shielded contacts for RF applications as well as balanced high sensitivity circuits.
High speed Coax contacts within a
connector provide the shielding
protection, and many cases the
RF/microwave performance,
needed in the circuitry of many
applications.
High
Speed
Connectors
Overview
SHIELDED COAXIAL
CONTACTS
Accessories
Aquacon
Herm/Seal
PCB
Fiber
Optics
High Speed Coax and Twinax Contacts
Amphenol® Shielded Contacts
provide design versatility for
electrical circuitry. Shielded contacts
are used to eliminate interference
from outside electrical sources,
when standard crimp or solder contacts
are not enough.
Shielded Coax Contacts
All popular series of Amphenol circular connectors
and many rectangular connectors are available with coax contacts. Diameters are
standardized in sizes 4, 8, 12 and 16 so that coaxial contacts may be interchanged
with power contacts in connector arrangements which include those sizes. Popular
RG cable types and a variety of other commercial coaxial cables can be accommodated. See page 244 for coax contact performance data. Matched impedance size 12
coax contacts are also available (see page 248). The use of coax contacts within a
connector, compared to the use of individual coaxial/shielded connectors, offers
advantages of savings in space and weight and no cross-mating difficulties. Coax and
standard contacts may be mixed within the connector to meet special signal needs.
The connector itself offers further protection and environmental integrity through the
grommets and seals used, and coaxial junction is protected by the connector
outer shell.
CONCENTRIC
TWINAX
SHIELDED
CONTACTS
High performance shielding
capabilities are available with
Concentric Twinax contacts. These
are designed for protection from
magnetic and electrostatic
interference including nuclear
electro-magnetic pulse. The contact
is crimp terminable to twisted
shielded cable and is fully scoopproof (recessed pins) in MILDTL-38999 connectors. The
concentric twinax contact is
engineered to maintain shield
integrity through a multi-pin circular
connector and does not require
contact polarization within the
insert. Size 8 concentric twinax
contacts were developed for use in
MIL-STD-1553B Airborne multiplex
data bus applications. Ideal for this
application need is the high
performance Tri-Start connector
with its fully scoop-proof feature of
recessed pins.
MIL-DTL-38999
Connector with
High Speed Coax
Contacts
Size 8
Coax
Pin Contact
Concentric Twinax Contacts Size 8
Concentric Twinax
Size 12 Contacts
MIL-DTL-38999 Lanyard “Breakaway”
Connector with Concentric Twinax
Contacts, Qualified for MIL-STD-1760
MIL-DTL-38999
Connector with
Concentric Twinax
Contacts
The concentric twinax contact is crimp terminable to twisted shielded cable. Size 12
concentric twinax contacts were developed for SAAB. They can be used in any size
12 cavity of D38999 I, II or III or SJT connector.
Size 8 & 12 coax, triax or twinax contacts or size 16 coax contacts are available in
Ground Plane Connectors (See photo preceding page). These are
MIL-DTL-38999 Series III connectors for data bus, LAN and coax/triax/twinax
transmission lines with conductive inserts that ground the outer contact conductor to
4
the shell. They are sold “less contacts”
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Coax Contacts with High Frequency Range
DC to 40 GHz
Overview
Amphenol
Aerospace
38999
HIGH FREQUENCY
COAX CONTACTS WITH
“FLOAT MOUNT”
TECHNOLOGY
Amphenol Aerospace now offers DC to
40 GHz size 8 coaxial contacts for the
High Frequency Size 8 Coax
D38999 housing and standard inserts.
Contacts with “Float Mount“
These contacts can be terminated to a
Technology
multiple of cable types depending on the
application.
By using standard interfaces that are based on MIL-STD-348 and can be installed in
any D38999 size 8 insert, Amphenol has transformed the circular connector industry.
This technology expands the use of D38999 connectors to include the microwave
transmission lines within the multi-port configuration without change to a custom
connector.
The high frequencies are maintained by Amphenol’s unique “Float Mount” technology.
This technology allows for consistent microwave performance while maintaining tight
mechanical tolerances. This consistency provides superior electrical performance
and, unlike other blindmate connectors, will maintain an accurate phase length when
mated. See page 250 for specifications, performances and ordering of this contact.
HF38999 - D38999 Connectors
with High Frequency
Coax Contacts
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
High
Speed
Fiber
Optics
Contacts
Connectors
Cables
26482
Matrix|Pyle
83723 III
Variety of PC Tail Twinax Contacts
Class L
BackShells
Options
Others
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
22992
Amphenol supplies sizes 8, 10 and 12
triax contacts for use in MIL-DTL-38999
Triax Contacts
Series I, II and III connectors. Triax contacts provide additional shielding when terminated to triax
cable having solid or stranded center conductors. See cable compatibility in
the Cable Usage Guide and performance data and ordering of triax contacts
on pages 254-257. Each of the three conductors of the triax contact is separated by
dielectric insulation to isolate ground planes and to improve shielding
effectiveness. All conductors are crimp terminated for high reliability and ease of
assembly. Triax contacts may be specified for direct connection to printed circuit boards.
For maximum system flexibility, triax contacts may be mixed
with coax, twinax and power contacts in a single connector.
Rail Launch MIL-STD-1760
Connector with
Triax Contacts
5015
TRIAX CONTACTS WITH
THREE CONDUCTORS FOR
USE WITH TRIAX CABLE
Printed Circuit Twinax Contacts provide
a cost effective packaging solution for
limited space applications where
connectors are attached to printed
circuit boards.
Crimp Rear
Release
Matrix
Shielded Triax Contacts
Pyle
See pages 255-257 for performance data and ordering of PC tail twinax contacts, and
consult Amphenol Aerospace for further information needed. Also see the Printed
Circuit Board and the Series I, II, III section for MIL-DTL-38999 connectors.
26500
Amphenol provides Printed Circuit
Tail Twinax contacts for MILDTL-38999 Series I and III circular
connectors and also for ARINC
404 and ARINC 600 rectangular
connectors. High reliability is
assured with factory pre-assembled contacts and standardized
termination to the board.
D38999 Connectors
with PC Tail
Twinax
Contacts
Matrix 2
PC TAIL TWINAX
CONTACTS
EMI Filter
Transient
Twinax Contacts for Printed
Circuit Board Applications
217
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
Cable Systems with High Frequency Contacts
Cable Assembly Capabilities/Testing of Cables
CABLE ASSEMBLY CAPABILITIES
Amphenol provides a large array of cable assemblies with
high speed quadrax and differential twinax contacts, as well as
coax and concentric twinax contacts. This page shows a few examples. The Cable Usage Guide pages that follow list the design
possibilities for these high speed contacts.
Accessories
Aquacon
Herm/Seal
PCB
High
Speed
Amphenol strives to offer customers the widest range of cable
assemblies, keeping abreast of the latest cable types in the marketplace. Please consult with the contact product managers at Amphenol
Aerospace for assistance in designing the cable assembly that suits
your particular needs. From a simple one-cable interconnection, to a
multiple cable system, Amphenol can design and supply your cable
needs for high frequency contacts and connectors. See the High
Frequency Contact Designer’s Guide at the end of this catalog section.
Eight Wire Gigabit Ethernet Assembly
Fiber
Optics
Contacts
Connectors
Cables
5015
Matrix|Pyle
Quadrax Cable Assembly can
be attached to any
connector application
Variety of Quadrax Cable Assemblies
TESTING OF CABLES
Rigid testing is performed 100% on cable assemblies at Amphenol
before they are shipped to make sure they meet customer requirements.
These requirements include tests such as DWV, resistance and
continuity. Amphenol has the background experience and understanding
of harsh environmental testing to assure reliable “end-to-end”
interconnect solutions.
Quadrax Cable Assembly
attachedtoBoardLevelCompliant
Quadrax Connector
Options
Others
BackShells
Class L
22992
Crimp Rear
Release
Matrix
Pyle
26500
83723 III
26482
Matrix 2
EMI Filter
Transient
Quadrax Contact with 8P8C “RJ45”
Jack Ethernet Assembly
218
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Amphenol
Aerospace
Cable Usage Guide
38999
Use the Cable Usage Guide on pages 219-222 as follows:
1. Locate the cable you are using in Cable Type column. For cables not listed consult Amphenol Aerospace.
2. Refer to the Amphenol Connector section which features contacts/adapters for this cable. Connector size, performance
features and insert pattern availability may influence your choice.
3. Order your connector and contacts or transition adapters by following the procedure given in the section for the connector
series selected. These instructions are supplemented by the Amphenol Catalog Section covering the basic connector.
Quadrax Contacts
CABLE USAGE GUIDE
D38999 Series III* Connectors
Differential Twinax Contacts
CABLE USAGE GUIDE
D38999 Series III* Connectors
Nominal
Impedance
(ohms)
Cable Type
Draka Fileca
Filotex
PIC Wire
Cables
100
Draka Fileca
110
* Requires modified connector to accommodate keyed contacts.
150
M17/176-00002
224463/9P025X-2
Tensolite
24463/9P025X-2(LD)
Tensolite
26483/03071X-2
Nominal
Impedance
(ohms)
78
Options
Others
Cable Type
BackShells
Differential Twinax Transition Adapters
CABLE USAGE GUIDE
D38999 Series III* Connectors
or ARINC 600 Connectors
Class L
150
22992
26473/02006X-4(LD)
RCN8328
Thermax
Gore
Tensolite
100
5015
Tensolite
F-4703-3
F-4704-4
NF22Q100
NF22Q100-01
NF24Q100
NF26Q100
956-5
GSC-10-8273900
26473/02006X-4(LD)
Pyle
956-4TN
956-5
T956-4T200
MX100Q-24
24450/03089X-4(LD)
RCN8487
Nominal
Impedance
(ohms)
26500
Cable Type
Matrix|Pyle
150
Crimp Rear
Release
Matrix
Tensolite
Gore
JSFY02-1
JSF18
Tensolite
Gore
Connectors
Quadrax Transition Adapters
CABLE USAGE GUIDE
D38999 Series III* Connectors
or ARINC 600 Connectors
S280W502-4
JSF-18-3
Themax
Contacts
83723 III
Gore
24443/9P025X-4(LD)
23450/04090X-4 (LD)
24443/C20714X-4(LD)
RCN7688
RCN8513
RCN8672
Fiber
Optics
26482
24443/03166X-4(LD)
High
Speed
98
Matrix 2
100
Tensolite
26463/70460X-2
ST5M1284-003
Draka Fileca 2709-3
PIC Wire
E10224
NF24T100-200C Space
23460/05114X-2(LD)
24463/03220T-2(LD)
Tensolite
24463/05099X-8(LD)
26453/03184X-2(LD)
24463/9P025X-2(LD)
Raychem
0026A0024, 0024G0024
S280W502-6
JSFY11-24
Gore
GSC-05-827300-00
956-6262, 956-1T200
Thermax
12814
MX 100-24
Tensolite
26483/03071X-2(LD)
Nominal
Impedance
(ohms)
EMI Filter
Transient
Tensolite
F-4703-3
F-4703-4
F-4704-5
F-47-4-6
ET2PC236
ET2PF870
E50424
E50426
E51424
NF22Q100
NF24Q100
NF24Q100-1
NF24Q100-01-200C
NF26Q100
NF26Q100-1
NF26-2Q100
24443/03130X-4(LD)
Cable Type
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
100
150
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
219
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
Draka Fileca
Tensolite
High
Speed
Fiber
Optics
Contacts
Connectors
5015
Matrix|Pyle
Options
Others
BackShells
Class L
22992
Crimp Rear
Release
Matrix
Pyle
26500
83723 III
26482
Matrix 2
EMI Filter
Transient
Cables
220
Quadrax Contacts
CABLE USAGE GUIDE
ARINC 600 Rack & Panel Connectors
Cable Type
Accessories
Aquacon
Herm/Seal
PCB
Cable Usage Guide, cont.
S280W502-4
JSFY02-1
Gore
Tensolite
F-4703-3
F-4704-5, F4704-4
NF22Q100
NF24Q100
24443/03130X-4(LD)
24443/9P025X-4(LD)
Nominal
Impedance
(ohms)
100
Differential Twinax Contacts
CABLE USAGE GUIDE
ARINC 600 Rack & Panel Connectors
Cable Type
ABS0386WF24
ASNE0272TK22
ASNE0272TK24
Tensolite
24463/9P025X-2(LD)
100
100
100
100
110
RCN8328
26473/02006X-4(LD)
150
Concentric Twinax Contacts
CABLE USAGE GUIDE
D38999 Series I, II, III & SJT Connectors
Cable Type
EPD32263A
EPD22189B
M17/176-00002
GSC-12-2548-00
GC875TM24H
GSC-12-81095-00
10602
10606
10612
Raychem
10613
10614
23089/RC
05A0771
T10971
7724C8664
7726D0664
782OD0111 (20 AWG)
0024G0024
5M2022-003
HS5930
S280W502-1
CXN2268
Nominal
Impedance
(ohms)
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
78
100
100
100
100
100
Triax Contacts
CABLE USAGE GUIDE
D38999 Series I, II, III & SJT Connectors
Cable Type
JN1088WT
5M2397-002
81264-02
JN1088WU
Gore
GSC-03-81497-00
RG179 (Coax Cable)
Tensolite
28988/50823LXX-1
Tensolite
28988/50823LXX-1
Thermatics
12447
10602 (Twinax Cable)
5M2559-001
81264-01
ST5M1323-001
Champlain
81-00700
28598/9C026LT-1
Tensolite
26895/90334X-1
Teledyne
13809
11914/1
Times AA6603
RGX179
Concentric Twinax Contacts
CABLE USAGE GUIDE
ARINC 600 Rack & Panel Connectors
Cable Type
S280W502-1
Nominal
Impedance
(ohms)
Nominal
Impedance
(ohms)
100
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Nominal
Impedance
(ohms)
50
75
75
75
75
75
75
75
75
77
95
95
95
95
95
95
95
95
95
75
Amphenol
Aerospace
Cable Usage Guide, cont.
38999
Use the Cable Usage Guides on this page for Coax Contacts as follows:
1. Locate the cable you are using in Cable Type column. For cables not listed consult Amphenol Aerospace.
2. Refer to the Amphenol connector section which features contacts for this cable, as indicated by a • in the appropriate
column. If more than one connector series utilizes contacts designed for your cable, investigate each of them.
Connector size, performance features and insert pattern availability may influence your choice.
3. Order your connector and coax contact by following the procedure given in the section for the connector series
selected. These instructions are supplemented by the Amphenol Catalog Section covering the basic connector.
4. The Additional Contacts column of this guide is used to indicate an additional availability of contact designs for older
cable types or capability. Consult Amphenol Aerospace for further information.
Coax Contacts
CABLE USAGE GUIDE
Cable Type
•
•
For Rectangular
Connectors
Additional
Contacts
(Consult
Amphenol)
•
•
•
•
•
•
•
•
High
Speed
Fiber
Optics
Contacts
Connectors
Cables
•
•
•
•
•
•
•
•
•
•
•
BackShells
•
Class L
•
•
•
•
22992
•
•
5015
•
Pyle
•
26500
•
•
•
•
•
•
•
•
•
•
Matrix|Pyle
•
•
•
•
•
•
•
•
•
•
83723 III
•
•
•
•
•
26482
•
•
•
•
•
•
•
•
•
Matrix 2
•
•
•
•
NOTE:
Options
Others
CHART CONTINUES ON NEXT PAGE
NOTE: For information on coax contacts for Miniature circular connectors, MIL-DTL-26482 Series 1, see catalog 12-070 and consult
Amphenol Industrial Operations.
For Standard & Heavy
Duty Circular
(MIL-DTL-5015 type)
(MIL-DTL-22992 type)
EMI Filter
Transient
50
75
97
50
75
75
74
53
53
50
50
75
93
93
125
93
50
50
50
50
50
95
75
50
50
50
50
70
50
50
75
95
75
50
50
95
95
50
93
50
50
75
50
50
50
50
75
For Circular
(MIL-DTL-38999 type)
Crimp Rear
Release
Matrix
RG-5B/U
(M17/073-RG212)
RG-6A/U
(M17/2-RG6)
RG-7/U
RG-9B/U
(M17/075-RG214)
RG-11A/U
(M17/6-RG11)
RG-12A/U
(M17/6-RG12)
RG-13A/U
RG-21A/U
RG-55B/U
(M17/084-RG223)
RG-58C/U
(M17/028-RG058)
RG-58
(M17/155-00001)
RG-59B/U
(M17/29-RG59)
RG-62A/U
(M17/030-RG062)
RG-62B/U
RG-63B/U
(M17/31-RG63)
RG-71B/U
(M17/90-RG71)
RG-87A/U
RG-115/U
RG-115A/U
RG-116/U
RG-122/U
(M17/054-RG122)
RG-133A/U
(M17/100-RG133)
RG-140/U
(M17/110-RG302)
RG-141A/U
RG-142A/U
RG-142B/U
(M17/060-RG142)
RG-143A/U
RG-161/U
RG-174A/U
(M17/119-RG174)
RG-178B/U
(M17/093-RG178)
RG-179B/U
(M17/094-RG179)
RG-180B/U
(M17/095-RG180)
RG-187A/U
(M17/094-RG179)
RG-188A/U
(M17/113-RG316)
RG-188 Double Braid
RG-195A/U
(M17/095-RG180)
RG-195 Double Braid
RG-196A/U
(M17/169-00001)
RG-210/U
RG-212/U
(M17/073-RG212)
RG-214/U
(M17/075-RG214)
RG-216/U
(M17/77-RG216)
RG-222/U
RG-223/U
(M17/084-RG223)
RG-225/U
(M17/86-RG225)
RG-227/U
RG-302/U
(M17/110-RG302)
Nominal
Impedance
(ohms)
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
MIL-DTL-38999 supersedes MIL-C-38999.
MIL-DTL-5015 supersedes MIL-C-38999.
MIL-DTL-22992 supersedes MIL-C-22992
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
221
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
High
Speed
Fiber
Optics
Contacts
Connectors
5015
Matrix|Pyle
Options
Others
BackShells
Class L
22992
Crimp Rear
Release
Matrix
Pyle
26500
83723 III
26482
Matrix 2
EMI Filter
Transient
Cables
222
Coax Contacts
CABLE USAGE GUIDE, cont.
Cable Type
Accessories
Aquacon
Herm/Seal
PCB
Cable Usage Guide
Nominal
Impedance
(ohms)
RG-303/U
(M17/111-RG303)
RG-304/U
(M17/112-RG304)
RG-316/U
(M17/113-RG316)
RD-316
(M17/152-00001)
Double Braid
RG-400
(M17/128-RG400)
M/A-COM 5M2869-001
5022A1311-D
Beldon 9307
FA-19X
T-Flex-402
T-Flex-405
Filotex ET124962
JN1088WT
(Triax)
JN1088WU
(Triax)
PAN6422XQ
PAN6422XY
PAN6595XM
(Triax)
51-04486
Haveg
81-00207
GWN1159A
Gore
CXN3403
Times
AA3248
Teledyne
11299
5021D1331-0
5021D1331-9
5022D1312-9
7527A1318
Raychem
9527A1314
9528A1318
9530A5314
9530D5314
Thermatics
2929-29
Tensolite
30850/87T-1
Thermax
50C-25A-DS-1
ESC352001
ESC432101
For Circular
(MIL-DTL-38999 type)
50
50
50
•
50
•
50
50
50
50
50
50
50
50
50
75
50
75
75
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
50
50
50
75
95
95
95
95
50
50
For Standard & Heavy
Duty Circular
(MIL-DTL-5015 type)
(MIL-DTL-22992 type)
For Rectangular
Connectors
•
•
Additional
Contacts
(Consult
Amphenol)
•
•
•
For Cable not found in the Coax Contact Cable Usage Guide, refer to these general dimensional ranges:
(In general, for D38999 Connectors, the size 8, 12 and 16 Coax Contacts will terminate cable in the following ranges )
SIZE 16
SIZE 12
.012 / .0215 Center Conductor (Stranded)
.012 / .0215 Center Conductor (Stranded)
.031 / .066 Dielectric
.031 / .105 Dielectric
.085 Max Outer braid (must be round for crimp termination)
.126 Max Outer braid (must be round for crimp termination)
.102 Max. Jacket
.145 Max. Jacket
SIZE 8
.012 / .0395 Center Conductor (Stranded)
.055 / .133 Dielectric
.180 Max Outer braid (must be round for crimp termination)
.201 Max. Jacket
Special coax contacts may be available for cables outside of ranges shown. Consult Amphenol Aerospace for further
assistance in selection of coax contact cables.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Amphenol
Aerospace
MIL-DTL-38999 Circular Connector
Overview
Amphenol® Connectors are ideally suited for the incorporation of shielded contacts for high
performance interconnection applications. The circular family is built around
MIL-DTL-38999 specifications, with Mil-approved and commercial styles offered.
Normal operating voltage for circulars with power contacts only is up to
900 VAC (RMS) at sea level.
The MIL-DTL-38999 family offers these features for contact termination flexibility:
• Widest selection of insert arrangements that can incorporate:
• Size 8 high speed Quadrax and Differential Twinax contacts for MIL-DTL-38999 Series III
(specially modified to accommodate keyed contacts)
• Transition adapters for use in attaching D38999 Series III connectors with high speed
quadrax or differential contacts to PCB boards
• Size 8, 12 and 16 Coax contacts
• Size 8 and 12 Twinax contacts
• Size 8, 10 & 12 Triax contacts
• Wide selection of connector shell styles and sizes
• Scoop-proof recessed design in LJT-R, TV-R and SJT-R connectors provide
protection for contacts
• Standard power contacts are crimp rear release, qualified to SAE AS39029
• Coax, Twinax, and Triax contacts employ the same retention system as power
contacts, simplifying user substitution
38999
TV-R, Tri-Start, D38999 Series III
• High performance capability series for both
general duty and severe environment
applications
• Offers the widest range of Subminiature
Family Mil-Spec qualified options in contact
and connector styles
• Threaded coupling; completely mates in one
turn; crimp termination
• Superior EMI/EMP shielding effectiveness
• Scoop-proof design (recessed pins)
• Available in aluminum, stainless steel and
firewall, or lightweight composite styles
See 38999 section Series III for complete
information on this section.
GENERAL ORDERING INFORMATION
Fiber
Optics
Contacts
Connectors
Cables
JT-R, D38999 Series II
LJT-R, D38999 Series I
Matrix|Pyle
83723 III
Pyle
BackShells
Options
Others
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Class L
SAE AS39029 supersedes MIL-C-39029.
MIL-DTL-38999 supersedes MIL-C-38999.
MIL-DTL-27599 supersedes MIL-C-27599
22992
NOTE:
NOTE:
See the SJT section of this catalog.
• Amphenol proprietary series
(non-MS) which is a further
expansion of the basic JT family,
but incorporates the LJT
scoop-proof design
• Compliant with several
European specifications
5015
See Catalog 12-094 for complete
information on this series.
• Commercial/Industrial
38999 Series III type
• Cost effective high performance
connector for severe environments or
general duty industrial applications
• Consult Amphenol Industrial
Operations for further information
12-094 catalog is on-line at www.
amphenol-industrial.com.
SJT-R, 38999 Type
26500
Amphe-Lite, 38999 Type
Crimp Rear
Release
Matrix
• Select the Circular Series desired.
(See features of each series given briefly on
this page and in-depth in the other sections of this catalog,
which are on-line at www.amphenol-aerospace.com)
Series I - LJT-R Connectors
Series II - JT-R Connectors
Series III - TV-R Connectors
SJT* - SJT-R Connectors
See Amphe-Lite (Industrial 38999 type) Catalog 12-094
• Select the quadrax, differential twinax, coax, twinax and/or
triax contacts or the transition adapters that are needed from
the tables on the following pages that correspond to the cable
being used.
• Select the insert arrangement to accommodate required
number of contacts. Insert patterns for quadrax and
differential twinax contacts are on pages 241,242. Insert
patterns for coax, twinax and triax contacts are on
pages 258-260.
• Complete the connector part number from the connector
series catalog, incorporating the chosen insert pattern
number. See detailed how to order page 243 for ordering
38999, Series III with quadrax and differential twinax
contacts. Consult Amphenol for assistance in ordering
38999 circulars with coax, twinax and triax contacts.
• Consult Amphenol Aerospace for ordering information for
connectors with PC tail contacts and for transition adapters.
• If connector is ordered less contacts, power contacts and/or
sealing plugs may be ordered separately to fill out the insert
arrangement.
See 38999 section Series I, LJT for complete
information on this series.
• Scoop-proof (recessed pins)
• Bayonet coupling, crimp termination
• Also available in solder termination types
under MIL-DTL-27599 Series II
26482
See 38999 section Series II, JT for complete
information on this series.
• Shorter profile connector series for
applications requiring maximum
space savings
• Bayonet coupling, crimp termination
• Also available in solder termination types
under MIL-DTL-27599 Series II
Matrix 2
HOW TO ORDER CONNECTORS AND
HIGH FREQUENCY CONTACTS
High
Speed
EMI Filter
Transient
Amphenol MIL-DTL-38999, which feature rear
removable contacts, are normally supplied with a full
complement of power contacts, separately
packaged. Coax, twinax and triax contacts are
ordered by part number as referenced in the part
number charts on the following pages of this
catalog, and are substituted for the power contacts
at the time of the cable or equipment assembly. If the
application is for coax, twinax or triax contacts only,
the connector may be ordered less contacts and no
power contacts will be supplied.
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
223
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
General Description
Amphenol® Quadrax Contacts -Offer several
advantages for high data transfer rates, low power consumption and
excellent
EMI compatibility:
•
•
•
•
•
Accessories
Aquacon
Herm/Seal
PCB
Quadrax Contacts, MIL-DTL-38999, Series III
Four strategically spaced inner contacts form two 100 or 150
Ohm matched impedance differential pairs
Outer contact has rugged wall section for durability
Available in size 8 crimp termination style
Also available in size 8 with PC tails (see page 233)
Requires modification of MIL-DTL-38999 connector to
TYPICAL QUADRAX
accommodate keyed contacts
(4) CENTER
CONDUCTORS
BRAID
JACKET
High
Speed
Fiber
Optics
Contacts
SOCKET CONTACT
has socket outer contact
with a socket inner contact
TYPICAL QUADRAX PIN CONTACT
has pin outer contact with a pin
inner contact
INSULATION
Cable Illustration - Quadrax Contact
Quadrax Contacts are gold plated,
crimp termination
Connectors
Matrix|Pyle
Quadrax Pin with 8P8C “RJ45” Jack
Quadrax Pin Size 8 and MIL-DTL-38999
Series III Connector
Guide for selecting a Backshell:
When ordering backshells, to avoid interference between the piggyback
grommets which are used on all size 8 cavities and the backshell the below
keepout dimensions must be adhered to. (based on existing arrangements)
5015
Crimp Rear
Release
Matrix
Pyle
ORIENTATION
KEY
Class L
22992
BackShells
Options
Others
Finish of mating contact parts: supplied with
0.000050 min. gold over nickel on mating
parts. Consult Amphenol for availability of
other finishes.
Quadrax Size 8 Contact Performance:
• Bandwidth: Up to 1.25 GHz
• Data Rate: Exceeding 2.5 Gbps.
• Voltage Rating: 500 Vrms max. @
sea level
• Dielectric Withstanding Voltage:
1000 VAC rms between all inner contacts
@ sea level, 500 VAC rms between inner
and outer contacts @ sea level
Suggested Numbering for Quadrax
Contacts
26500
83723 III
26482
Matrix 2
EMI Filter
Transient
Cables
Size
A Dia Min
L Min
17
.734
.540
19
.869
.540
21
.869
.540
23
1.088
.540
25
1.234
.540
Suggested Strain Relief - Insert Arrangements
9-5 or 19-18 with Quadrax Contacts
Due to the piggyback grommet interference with normal strain reliefs
on the shell size 9 only, the recommended strain relief for the
connector is: Amphenol part number TGW-R-5309-10 (OD Cad) or
TGF-R-5309-10 (Electroless nickel) - shell size 9 only. For 19-18 insert
pattern, recommended backshell: Glenair 367-221-NF. This is
recommended due to the proximity of the size 8 contacts in relation
to the shell.
1
4
3
2
PIN CONTACT
MATING FACE
3
4
SOCKET CONTACT
MATING FACE
Differential Pairs, contacts 1-3, 2-4.
See page 243 for part number ordering of
popularly used 38999 Series III connectors with
100 ohm quadrax contacts.
Quadrax differential pairs are 1 and 3, 2 and 4.
Also see Quadrax contacts for ARINC 600 and R27
Rack and Panel Connectors on pages 265 and 266.
224
1
2
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Amphenol
Aerospace
Quadrax Contacts for MIL-DTL-38999
Series III, Application Data
TV-R Series, MIL-DTL-38999 Series III* Connectors
38999
QUADRAX CONTACTS FOR USE IN TV-R CONNECTORS
Contact Part Number
Cable
Inner
Impedance
Conductor
(Ohms)
(AWG)
Contact
Size
Electrical
Protocol††
Pin
Socket
21-033384-021
(L-2119-A)
21-033385-021
(L-2119-A)
24
Ethernet, 1000 Base-T
Gigabit Ethernet
21-033384-051
21-033385-051
(L-2119-D)
24
Ethernet, 1000 Base-T
Gigabit Ethernet
(L-2119-D)
Crimping Tools
Inner Contact Outer Contact
High
Speed
Fiber
Optics
24
Draka Fileca F-4704-6,
Gore RCN 8672
21-033384-151
(L-2119-AW)
21-033385-151
(L-2119-AW)
26
Tensolite NF24Q100-01 (same as
21-03338( )
-51, uses EMI Piggyback)
21-033384-161
(L-2119-BE)
21-033385-161
(L-2119-BE)
24
Gore RCN8513, JSFY18-3
21-033384-171
(L-2119-BN)
21-033385-171
(L-2119-BN)
22
Tensolite NF22Q100 Special Box
pattern, only mates with 21-0333
( )-181
21-033384-181
(L-2119-BP)
21-033384-181
(L-2119-BP)
22
Tensolite NF24Q100, NF24Q100-01
for 2.5 Gbps applications
21-033384-191
(L-2119-BS)
21-033385-191
(L-2119-BS)
24
Gore RCN 8647, RCN 8687
21-033384-301
21-033385-301
24
24
IEEE 1394B Firewire
JSFY02-1, JSFY18
21-033384-221
21-033385-221
24
IEEE 1394B Firewire
Gore RCN8487, JSFY18
21-033384-231
21-033385-231
24
IEEE 1394B Firewire
Tensolite 24450/03089X-4(LD)
Same as 21-03338( )-211 but Box
pattern, mates with 21-03338( )-241
only
21-033384-241† 21-033385-241†
24
IEEE 1394B Firewire
F-4703, ABS1503KD24
21-033384-281
21-033385-281
100
Tensolite 26473/02006X-4(LD)/Gore
RCN8328 (not for new designs, use
21-033450/1 series)
21-033384-31
(L-2119-B)
21-033385-031
(L-2119-B)
150
26
Options
Others
CHART CONTINUES ON NEXT PAGE
QUADRAX CONTACT DATA
Contacts are inserted by hand. Refer to termination instructions listed. Contacts are
removed with a removal tool. Recommended tool is MIL-I-81969/14-06, Daniels DRK-264-8.
Refer to termination instructions listed. Finish of mating contact parts: Contact part numbers
shown in the chart above are supplied gold plated per ASTM B488 Type II, Code C, .000050
min. thick over nickel plate per AMS-QQ-N-290, Class 2, .000030/.000150 thick.
Meets EN3155-074
BackShells
21-033385-211
Class L
21-033384-211
110
USB2.0 (480 Mbps)
22992
21-033384-101† 21-033385-101†
5015
USB2 (28433/02171LX-4)
Tensolite 24450/03089X-4(LD)
Gore RCN8647
M22520/2-01
with Positioner M22520/5-01
with Die Set
M22520/2-37
or with Daniels M22520/5-45
(Location A)
Positioner
K709
Crimp Rear
Release
Matrix
90
8
Ethernet (100 Mbps),
1000 Base-T Gigabit
Ethernet (1 Gbps)
Ethernet (100 Mbps),
1000 Base-T Gigabit
Ethernet (1 Gbps)
Ethernet (100 Mbps),
1000 Base-T Gigabit
Ethernet (1 Gbps)
Ethernet (100 Mbps),
1000 Base-T Gigabit
Ethernet (1 Gbps)
•Serial FPDP Applications
(2.5 Gbps) (Typical app
run at 150 Ohms)
• HDMI 1.3
Pyle
21-033385-141
(BACC45GN1)
26
26500
21-033384-141
(BACC47GM1)
100
Cables
Matrix|Pyle
21-033385-071
(L-2119-AB)
Connectors
83723 III
21-033384-071
(L-2119-AB)
Contacts
Ethernet (100 Mbps),
1000 Base-T Gigabit
Ethernet (1 Gbps)
Ethernet (100 Mbps),
1000 Base-T Gigabit
Ethernet (1 Gbps)
22
26482
21-033385-061
(L-2119-H)
Matrix 2
21-033384-061
(L-2119-H)
EMI Filter
Transient
Draka Fileca F-4703-3, F4704-4,
Filotex ET 2PC236, Filotex
ET2PF870, PIC Wire E50424
ABS0972, Tensolite
23450/04090X-4(LD) Draka Fileca
F-4704-5, ABS1503 KD 24
Tensolite NF24Q100, NF24Q100-01,
24443/9P025X-4(LD), S280W502-4,
24443/03130X-4(LD),
24443/C20714X-4(LD),
24450/0120X-4(LD),
NF24-2Q100, TYCO CECRWC-18664, GORE GSC-0181869-01, 24443/03166X-4(LD),
Thermax T956-4T200, Pic Wire
E51424, Thermax MX100Q-24,
NF24Q100-01-200C (Space),
BMS13-72T03C04G024
Tensolite NF22Q100,
NF22Q100-01, Thermax 956-5,
GORE RCN 7688
Tensolite NF26Q100, NF26Q100-01,
NF26-2Q100, PIC E51426,
Wirenetics W-3714-379
S280W502-4/BMS1372T03C04G024
(Termination Instruction Sheet)**
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
Daniels crimping tools available from Daniels Mfg. Corp. 6103 Anno Ave.,
Orlando, FL 32809
* Requires modified connector to accommodate keyed contacts.
**Termination instructions are packaged with each contact and can be
found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp
† Consult Amphenol for current release of this contact or instruction sheet if applicable.
†† Test reports available for indicated protocols. Consult Amphenol
Aerospace. Typical applications run at 150 Ohms
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
225
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
Connectors
5015
Matrix|Pyle
Options
Others
BackShells
Class L
22992
Crimp Rear
Release
Matrix
Pyle
26500
83723 III
26482
Matrix 2
EMI Filter
Transient
Cables
226
TV-R Series, MIL-DTL-38999 Series III* Connectors
QUADRAX CONTACTS FOR USE IN TV-R CONNECTORS
(Termination Instruction Sheet)**
Cable
Pin
Tensolite 26473/02006X-4(LD) Same as
21-033384/5-31 but box pattern (not for new
designs, use 21-033450/1 series) Gore
RCN8328
High
Speed
Contacts
Application Data
Contact Part Number
Accessories
Aquacon
Herm/Seal
PCB
Fiber
Optics
Quadrax Contacts, MIL-DTL-38999, Series III
Impedance
(Ohms)
Socket
21-033384-201† 21-033385-201†
Gore RCN7625
21-033384-271 21-033385-271
Tensolite 26473/02006X-4(LD), Gore RCN8328
21-033450-001 21-033451-001
(L-2119-BW)
(L-2119-BW)
Tensolite 26473/02006X-4(LD), Gore RCN8328 21-033450-011† 21-033451-011†
(same as 21-033450/1-1 except box pattern.
Mates with 21-033450/1-11 only.
Quadrax PCB Contacts
Contact Part Number
Impedance
(Ohms)
Pin
Socket
21-033398-021 21-033397-021
100 Ohm
21-033398-031 21-033397-031
100 Ohm
21-033398-061 21-033397-061
150 Ohm
21-033398-071 21-033397-071
150 Ohm
21-033398-081 21-033397-081
150 Ohm
21-033398-091 21-033397-091
100 Ohm
21-033398-111 21-033397-111
100 Ohm
21-033398-121 21-033397-121
100 Ohm
21-033398-131 21-033397-131
150 Ohm
21-033398-141 21-033397-141
100 Ohm
21-033398-151 21-033397-151
150 Ohm
21-033398-191 21-033397-191
100 Ohm
21-033398-211 21-033397-211
150 Ohm
21-033398-221 21-033397-221
100 Ohm
21-033398-231 21-033397-231
100 Ohm
21-033398-241 21-033397-241
100 Ohm
21-033398-251 21-033397-251
100 Ohm
21-033398-271 21-033397-271
100 Ohm
21-033398-281 21-033397-281
100 Ohm
21-033398-291 21-033397-291
100 Ohm
21-033398-301 21-033397-301
100 Ohm
21-033398-311 21-033397-311
100 Ohm
21-033398-341 21-033397-341
100 Ohm
21-033398-351 21-033397-351
100 Ohm
21-033398-361 21-033397-361
100 Ohm
21-033398-371 21-033397-371
100 Ohm
21-033398-381 21-033397-381
100 Ohm
21-033398-391 21-033397-391
100 Ohm
21-033398-401 21-033397-401
100 Ohm
21-033398-411 21-033397-411
150 Ohm
21-033398-421 21-033397-421
100 Ohm
21-033398-431 21-033397-431
100 Ohm
21-033398-451 21-033397-451
150 Ohm
21-033398-461 21-033397-461
100 Ohm
21-033398-471 21-033397-471
100 Ohm
21-033398-481 21-033397-481
100 Ohm
21-033398-491 21-033397-491
100 Ohm
21-033398-501 21-033397-501
100 Ohm
21-033398-511 21-033397-511 100/150 Ohm
21-033398-521 21-033397-521
100 Ohm
21-033398-531 21-033397-531
100 Ohm
21-033398-541 21-033397-541
100 Ohm
21-033398-551 21-033397-551
100 Ohm
21-033398-561 21-033397-561
100 Ohm
Inner
Conductor
(AWG)
Contact
Size
Crimping Tools
Electrical
Protocol††
Inner
Contact
Outer
Contact
M22520/2-01
with Positioner
M22520/2-37
or with Daniels
Positioner K709
M22520/5-01
with Die Set
M22520/5-45
(Location A)
26
150
8
26
Fibre-Channel (1 GBPS, 2
GBPS, 1G/2G), 1000 Base-CX
(1.25 GBPS), SCSI-2 (3.2 GBPS)
26
Fibre-Channel (1 GBPS, 2
GBPS, 1G/2G), 1000 Base-CX
(1.25 GBPS), SCSI-2 (3.2 GBPS)
Quadrax PCB Contacts
L Dim
1.035
0.866
1.035
0.494
0.780
0.840
0.708
0.859
0.780
0.615
0.815
0.605
0.815
0.775
0.494
0.741
0.788
0.741
0.806
1.035
0.836
0.940
0.901
0.871
0.939
0.672
0.914
0.360
1.009
0.866
1.169
0.819
0.494
0.761
0.889
0.971
0.418
0.875
0.699
0.582
0.666
0.946
0.788
0.815
Pretinned
X
X
X
X
X
X
Contact Part Number
Pin
Socket
21-033398-581 21-033397-581
21-033398-591 21-033397-591
21-033398-601 21-033397-601
21-033398-611 21-033397-611
21-033452-011 21-033453-011
21-033452-021 21-033453-021
21-033452-031 21-033453-031
21-033452-041 21-033453-041
21-033452-051 21-033453-051
21-033452-061 21-033453-061
21-033452-071 21-033453-071
Impedance
(Ohms)
100 Ohm
100/150 Ohm
100 Ohm
100 Ohm
150 Ohm
150 Ohm
150 Ohm
150 Ohm
150 Ohm
150 Ohm
150 Ohm
Daniels crimping tools are available
from Daniels Mfg. Corp. 6103 Anno
Ave., Orlando, FL 32809
* Requires modified connector to
accommodate
keyed contacts.
** Termination instructions are
packaged with each contact and
can be found on-line at: www.
amphenol-aerospace.
com/serviceinstructions.asp
† Consult Amphenol Aerospace for
current release of this contact or
instruction sheet if applicable.
†† Test reports available for
indicated protocols.
Consult Amphenol Aerospace.
*** Must be used with
21-033321-005
piggyback grommet seal.
L Dim
Pretinned
0.721
0.939
0.939
1.366
1.035 (mates to 21-033450/51 series)
0.815 (mates to 21-033450/51 series)
0.815 (mates to 21-033450/51 series)
0.866 (mates to 21-033450/51 series)
0.494 (mates to 21-033450/51 series)
0.582 (mates to 21-033450/51 series)
0.939 (mates to 21-033450/51 series)
X
SEALING PLUGS
Sealing Plugs
for use with D38999 Connectors
using Quadrax Contacts Size 8 Cavities
Part Number
***Standard Plastic
T3-4008-59P
Standard Plastic to be used with PCB tails
(shorter tail length)
T3-4008-59P1
***Metal sealing plug - can be used when
mating with contacts on mating half
21-033899-8Q1
Metal sealing plug used with PCB’s and
mating contact on mating half
21-033899-8Q2
PIGGYBACK GROMMET
Grommet for use with D38999
Connectors
using Quadrax Contacts
Part Number
Metallized piggyback grommet
21-033321-023
Indicated length given in chart at
left is the distance from the rear of the contact
retention shoulder to the tip of the PCB tails.
L DIM. LENGTH
INDICATED IN
TABLE COLUMN
X
Note: It does not indicate stickout length when
installed in D38999 connector.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
New “Split-Pair” Quadrax Contacts & Cables
Assemblies for MIL-DTL-38999, Series III
Features & Benefits/How to Order
Amphenol
Aerospace
38999
“Split-Pair” for use with CAT6A Type Cable
Amphenol Aerospace offers the high performance
interconnect solution for CAT6A type cable.
MIL-DTL-38999 Series III Connectors with “Split-Pair”
Quadrax Contacts for use with CAT6A Type Cable
FEATURES & BENEFITS:
• Overall higher bandwidth than standard CAT5E quadrax-Supports
up to 6.5 Gbps per pair
• Enhanced crosstalk performance (compared to standard quadrax)
due to compatibility with shielded twisted pair of cables
• Can be used for a variety of high speed applications beyond
current quadrax design**
• Four strategically spaced inner contacts form two 100 Ohm
matched impedance differential pairs
• Outer contact has rugged wall section for durability
• Available in size 8 crimp termination style
• Also available in size 8 PC tails
• Can be installed into existing quadrax contact connector cavities
• Requires modification of MIL-DTL-38999 connector to accommodate keyed contacts
Fiber
Optics
Contacts
Connectors
Cables
“Split-Pair” Quadrax Contacts for use
with CAT6A Type Cable
Suggested Numbering for Quadrax Contacts
2
3
PIN CONTACT
MATING FACE
3
4
SOCKET CONTACT
MATING FACE
Pyle
SOCKET 21-033471-021
24
Thermax
1536-195
26
SPLIT-PAIR QUADRAX
SOCKET CONTACT
Class L
PIN 21-033470-021
AWG
22992
SOCKET 21-033471-001
Cable
Thermax
1536-224
5015
Crimp Style Part Number
PIN 21-033470-001
Crimp Rear
Release
Matrix
SPLIT-PAIR QUADRAX CONTACT*
PART NUMBERS:
26500
Differential Pairs: 1 & 4, 2 & 3
Cable selection may limit data rate of above protocols
Matrix|Pyle
1
2
83723 III
1
4
26482
10/100/1000/10GBASE-T Ethernet
DVI
USB 2.0, 3.0
Serial Rapid IO (up to 3.125 Gbps)
PCI-Express 2.0
HDMI 1.3a
SATA 2.0 (up to 3 GHz)
Matrix 2
•
•
•
•
•
•
•
High
Speed
EMI Filter
Transient
APPLICATIONS:
For use with, but not limited to, the
following electrical protocols :
New/Featured
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
CRIMP TOOLS:
DANIELS M22520/5-01
with die set Y1999 or
M22520/5-45
Inner Contact
DANIELS M22520/2-01
with positioner K1777
SPLIT-PAIR QUADRAX
PIN CONTACT
REMOVAL TOOL:
Options
Others
Daniels crimping tools are available from Daniels Mfg. Corp. 6103
Anno Ave., Orlando, FL 32809
BackShells
Outer Contact
M81969/14-12
* Patent pending.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
227
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
PCB QUADRAX SOCKET
Impedance
Length ±.015
PCB Socket Part Numbers
Impedance
Length ±.015
21-033466-011
1.035
21-033467-011
1.035
21-033466-021
.815
21-033467-021
.815
21-033466-031*
.815
21-033467-031*
.866
21-033467-041
21-033466-051
.494
21-033467-051
.494
21-033466-061
.582
21-033467-061
.582
21-033466-071
.815
21-033467-071
.815
21-033466-081
.840
21-033467-081
.840
100 Ohm
21-033466-041
.815
100 Ohm
.866
*Pretinned
High
Speed
Contacts
Frequencies & Performance Data
How to Order/Transition Adapters
PCB QUADRAX PIN
PCB Pin Part Numbers
Accessories
Aquacon
Herm/Seal
PCB
Fiber
Optics
New “Split-Pair” Quadrax Contacts
LENGTH
INDICATED IN
TABLE COLUMN
Indicated length given in charts above is the
distance from the rear of the contact retention
shoulder to the tip of the PCB tails.
Note: It does not indicate stickout length when
installed in D38999 connector.
Connectors
TRANSITION ADAPTERS FOR LAUNCHING SIGNALS TO PC BOARDS
Quadrax Type Adapter/
Cable or PCB Tail Length
PCB Quadrax Receptacle
Straight Adapter/
Tail Length .110
Quadrax Receptacle Straight
Adapter with cable to board/
.195 tail length Thermax
1536-224
Class L
22992
Receptacle
228
Impedance
(Ohms)
Mating
Thread
Size
100
.375
21-033468-011
21-033469-001
21-033469-011
21-033469-021
21-033469-031
Options
Others
BackShells
Quadrax Receptacle 90
degree Adapter with cable to
board/
Thermax 1536-224
Plug
Mating plugs and receptacles
PCB Quadrax Receptacle 90
Degree Adapter/
Tail Length .110
5015
Pyle
Quadrax Plug Adapter/
Thermax 1536-224
Part Number
Illustration of Adapter
Wired to board
Matrix|Pyle
100 OHM QUADRAX TRANSITION ADAPTERS
FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALS TO PC BOARDS
Crimp Rear
Release
Matrix
26500
83723 III
26482
Matrix 2
EMI Filter
Transient
Cables
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Amphenol
Aerospace
New “Split-Pair” Quadrax Contacts
Frequencies & Performance Data
38999
FREQUENCIES OF INTEREST
For use with the following, but not limited to,
electrical protocols:
Frequency (GHz) Insertion Loss (dB) Return Loss (dB)
10/100/1000/10GBASE-T Ethernet
• DVI
• USB 2.0
• Serial Rapid IO (up to 3.125 Gbps)
• PCI-Express 2.0
• HDMI 1.3a
• SATA 2.0 (up to 3 GHz)
FEXT (dB)
0.1
0.09
35.68
62.36
59.29
0.24
0.22
36.44
42.87
62.25
0.5
0.45
43.66
43.63
55.22
0.625
0.57
43.49
53.68
43.53
1
0.98
17.82
49.26
48.33
1.25
1.29
15.1
43.57
44.12
1.5
1.47
17.94
46.02
40.78
1.7
1.86
12.23
48.01
47.23
2
2.11
12.9
37.45
38.12
2.5
2.42
15.97
29.9
31.52
3
2.86
16.52
35.94
29.36
PERFORMANCE
DATA
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
High
Speed
Insertion Loss
S-Parameters Magnitude
0
-0.5
Fiber
Optics
-1.0
Contacts
-1.5
Cables
S1, 2
Connectors
-2.0
EMI Filter
Transient
dB
-2.5
-3.0
-3.5
-6.0
-6.5
0.1
0.2
0.3
0.4
2
3
4
5
Pyle
Return Loss
26500
0.5 0.6 0.7 0.8
1
Frequency / GHz
Matrix|Pyle
-5.5
83723 III
-5.0
26482
-4.5
Matrix 2
-4.0
S-Parameters Magnitude
0
Class L
-20
22992
-15
5015
-10
Crimp Rear
Release
Matrix
S1, 1
-5
dB
The following graphs
on this page and the
next page provide
performance data on
Amphenol® 10GBASE
signal integrity (SI)
quadrax contacts.
Testing was done with
2 mated contacts
terminated on both
ends of 1 meter
Thermax cable.
NEXT (dB)
-25
BackShells
-30
-35
Options
Others
-40
-45
-50
0.1
0.2
0.3
0.4
0.5
0.6 0.7 0.8
1
Frequency / GHz
2
3
4
5
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
229
Amphenol
Aerospace
New “Split-Pair” Quadrax Contacts
Frequencies & Performance Data
Near-end Crosstalk
38999
S-Parameters Magnitude
III
HD
Dualok
II
I
SJT
-20
Accessories
Aquacon
Herm/Seal
PCB
-50
S1, 3
-25
-30
-35
-40
dB
-45
-55
-60
-65
-70
High
Speed
-75
-80
0.1
Fiber
Optics
0.2
0.3
0.4
Contacts
4
5
-20
S1, 4
EMI Filter
Transient
-25
-30
-35
-40
dB
-45
-50
-55
-60
Matrix|Pyle
26482
3
S-Parameters Magnitude
Cables
Matrix 2
2
Far-end Crosstalk
Connectors
83723 III
0.5 0.6 0.7 0.8
1
Frequency / GHz
-65
-70
-80
0.1
Crimp Rear
Release
Matrix
Voltage / V
Class L
BackShells
Options
Others
230
0.2
0.3
0.4
0.5 0.6 0.7 0.8
1
Frequency / GHz
2
3
4
5
2.5 Gps Eye Pattern (PRBS n=15)
22992
5015
Pyle
26500
-75
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-0.1
-0.2
-0.3
-0.4
-0.5
P1 Real Part
0
200
400
600
Time / ps
TD Voltage
800
1000
1200
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Differential Twinax Contacts, MIL-DTL-38999
Series III, General Description
Amphenol
Aerospace
38999
Amphenol® Differential Twinax Contacts -Offer
several advantages for high data transfer rates, low power consumption
and excellent EMI compatibility:
• Two strategically spaced inner contacts form two 100 or 150 Ohm
matched impedance differential pairs
• Outer contact has rugged wall section for durability
• Available in size 8 crimp termination style
• Also available in size 8 with PC tails
• Requires modification of MIL-DTL-38999 connector to
accommodate keyed contacts
(2) CENTER
CONDUCTORS
BRAID
JACKET
INSULATION
Cable Illustration - Differential Twinax Contact
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
TYPICAL DIFFERENTIAL
TWINAX SOCKET
CONTACT has socket
outer contact with a
socket inner contact
High
Speed
Fiber
Optics
Contacts
TYPICAL DIFFERENTIAL
TWINAX PIN CONTACT
has pin outer contact with
a pin inner contact
Connectors
Cables
EMI Filter
Transient
Differential Twinax Contacts are Gold
plated, Crimp Termination
Pyle
26500
Bandwidth: Up to 1.25 GHz
Data Rate: Exceeding 2.5 Gbps
Voltage Rating: 500 Vrms max. @ sea level
Dielectric Withstanding Voltage:
1000 VAC rms between all inner contacts @
sea level 500 VAC rms between inner and
outer contacts @ sea level
Matrix|Pyle
•
•
•
•
83723 III
Differential Twinax Size
8 Contact Performance:
26482
Differential Twinax Socket Contact
Matrix 2
Finish of mating contact parts: supplied with
0.000050 min. gold over nickel on mating parts.
Consult Amphenol for availability of
other finishes.
Class L
ORIENTATION
KEY
1
2
SOCKET CONTACT
MATING FACE
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Options
Others
PIN CONTACT
MATING FACE
1
BackShells
2
22992
Suggested Numbering
or Differential Twinax Contacts
5015
Crimp Rear
Release
Matrix
Differential Twinax Pin Contact
231
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
Differential Twinax Contacts, MIL-DTL-38999
Series III, Application Data
TV-R Series, MIL-DTL-38999 Series III* Connectors
DIFFERENTIAL TWINAX CONTACTS FOR USE IN TV-R CONNECTORS
Contact Part Number
Tensolite 24463/05099X-8(LD), Thermax MX
100-24, Tensolite 24463/9P025X-2(LD), Thermax
12814, ST5M1284-003 (98 Ohm), 26463/70460X2 (98 Ohm), PIC E10224,
Fileca 2709-3, NF24T100-200C (Space),
S280W502-1
Accessories
Aquacon
Herm/Seal
PCB
Impedance Contact
(Ohms)
Size
(Termination Instruction Sheet)**
Cable
GORE GSC-05-827300-00 Tensolite
26453/03184X-2(LD) Thermax 956-626Z
Pin
Socket
21-033387-021
(L-2119-E)
21-033388-021
(L-2119-E)
23460/05114X-2(LD), PIC E1024
21-033387-061
(L-2119-BH)
21-033388-061
(L-2119-BH)
Raychem 0026A0024, M17/176-00002 (77 Ohm)
Connectors
21-033387-071
(L-2119-BJ)
21-033388-071
(L-2119-BJ)
JSFY11-24, Tensolite 24463/03220T-2(LD),
Thermax 956-1T200
21-033387-091
(L-2119-BT)
21-033388-091
(L-2119-BT)
EMI Filter
Transient
Tensolite 26453/03184X-2(LD), Thermax
956-626Z, GORE GSC-05-827300-00
ASNE08072003-09
21-033388-041
(L-2119-T)
S280W502-6, Tensolite 24463/9P026X-2(LD)
21-033387-101
(L-2119-AK)
21-033388-101
(L-2119-AK)
AXON P509782
21-033387-131
21-033388-131
100
Tensolite 26453/03184X-2(LD)
21-033387-151
21-033388-151
100
Gore DXN 2125
21-033387-161
21-033388-161
100
Tensolite 26483/03071X-2(LD)
21-033387-031
(L-2119-AC)
21-033388-031
(L-2119-AC)
Tensolite 26483/03071X-2(LD)
21-033456-001
(L-2119-BX)†
21-033457-001
(L-2119-BX)†
Fiber
Optics
Contacts
5015
Matrix|Pyle
Options
Others
BackShells
Class L
22992
Crimp Rear
Release
Matrix
Pyle
26500
83723 III
26482
Matrix 2
Cables
100
Outer
Contact
Ethernet, USB
8
150
Contact Part Number
Pin
Socket
PCB (1.035 Length)
21-033834-001
21-033835-001
PCB (.788 Length)
21-033834-031
21-033835-031
PCB (.494 Length)
21-033834-041
21-033835-041
PCB (.939 Length)
21-033834-051
21-033835-051
PCB (.780 Length)
21-033834-061
21-033835-061
PCB (.871 Length)
21-033834-071
21-033835-071
PCB (.937 Length)
21-033834-081
21-033835-081
PCB (1.035 Length)
21-033834-091
21-033835-091
PCB (.843 Length)
21-033834-101
21-033835-101
PCB (.806 Length)
21-033834-111
21-033835-111
PCB (.908 Length)
21-033834-121
21-033835-121
PCB (.530 Length)
21-033834-131
21-033835-131
PCB (.819 Length)
21-033834-141
21-033835-141
PCB (1.035 Length)
21-033834-021
21-033835-021
PCB (1.035 Length) mates to
210-33456/57 series
21-033458-001
21-033457-001
Impedance
(Ohms)
M22520/5-01
with Die Set
M22520/5-45
(Location A)
Fibre Channel, 1000 Base-CX
Ethernet
PCB DIFFERENTIAL TWINAX CONTACTS FOR USE IN TV-R CONNECTORS
PCB Twinax
Contacts
M22520/2-01
with Positioner
M22520/2-37
or with Daniels
Positioner K709
Contact
Size
Daniels crimping tools are available from Daniels Mfg.
Corp. 6103 Anno Ave., Orlando, FL 32809
* Requires modified connector to accommodate keyed
contacts.
*** Indicated contact is vacuum degassed
†† Test reports available for indicated protocols.
Consult Amphenol Aerospace.
**Termination instructions are packaged with each contact
and can be found on-line at:
www.amphenol-aerospace.com/serviceinstructions.asp
† Consult Amphenol Aerospace for current release of this
instruction sheet.
100
8
Indicated length given in chart at left
is the distance from the rear of the contact
retention shoulder to the tip of the PCB tails.
L DIM. LENGTH
INDICATED IN
TABLE COLUMN
150
DIFFERENTIAL TWINAX CONTACT DATA
Contacts are inserted by hand. Refer to termination instructions listed. Contacts are
removed with a removal tool. Recommended tool is MIL-I-81969/14-06, Daniels
DRK-264-8. Refer to termination instructions listed.
Note: It does not indicate stickout length when
installed in D38999 connector.
Finish of mating contact parts: Contact part numbers shown in the chart above are
supplied gold plated per ASTM B488 Type II, Code C, .000050 min. thick over nickel
plate per AMS-QQ-N-290, Class 2, .000030/.000150 thick.
232
Inner
Contact
21-033387-051*** 21-033388-051***
(L-2119-AY)
(L-2119-AY)
21-033387-041
(L-2119-T)
High
Speed
Crimping Tools
Electrical
Protocol††
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Amphenol
Aerospace
Compliant Quadrax Contacts and
PC Tail Quadrax Contacts for PC Boards Attachment
General Description
38999
Amphenol® Quadrax Contacts for Printed
Circuit Board Attachment- Available for MIL-DTL-38999
MIL-DTL-38999, SERIES III
CONNECTOR WITH PC TAIL
CONTACTS. This arrangement has 33 size 22D and 2
Quadrax PC tail contacts.
Series III Circular connectors with straight PC tail termination and with
compliant pin termination. These provide the ideal solution for bringing
high speed data transmission to the board.
MIL-DTL-38999, SERIES III
CONNECTOR WITH PC TAIL
CONTACTS. This arrangement has 8 Quadrax PC tail
contacts.
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
High
Speed
Fiber
Optics
Compliant Pin Quadrax and PC Tail Quadrax Contacts
Contacts
Connectors
Cables
EMI Filter
Transient
Amphenol® Quadrax Contacts for Rectangular Board Level
Connectors - Incorporate the same size 8 Quadrax PCB contacts as used in circular
.500
Pyle
5015
Crimp Rear
Release
Matrix
.720
.376
26500
.475
Matrix|Pyle
2.000
83723 III
2.200
26482
4 POSITION BOARD LEVEL CONNECTOR WITH QUADRAX
Matrix 2
38999 connectors.
• Size 8 Quadrax Compliant contacts with hole diameters:
.025 ±.002 PTH Quadrax contact
.040 ±.003 PTH shell grounding
Accommodates backplane .125 inch min. thickness
• Consult Amphenol Aerospace for availability of additional connector configurations
Compliant Pin Quadrax Board Level Connector
Class L
3.440
3.640
G
F
E
D
C
B
A
.500
A
B
C
D
E
F
G
H
.720
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Options
Others
.381
H
BackShells
.475
22992
8 POSITION BOARD LEVEL CONNECTOR WITH QUADRAX
233
Amphenol
Aerospace
General Description
38999
III
HD
Dualok
II
I
SJT
Quadrax Transition Adapters and
Differential Twinax Transition Adapters
Amphenol® Transition Adapters - Are used to facilitate
launching of controlled impedance signals to printed circuit boards.
Amphenol provides transition adapters in both contact types:
• Quadrax transition adapters, 90° or straight receptacles
threaded or cable to board style
•
Accessories
Aquacon
Herm/Seal
PCB
QUADRAX
TRANSITION
ADAPTER PLUG
Differential twinax transition adapters, 90° or straight receptacles,
threaded or cable to board style
QUADRAX
TRANSITION ADAPTER
90 DEGREE RECEPTACLE
High
Speed
ELECTRICAL PROTOCOLS FOR
QUADRAX TRANSITION ADAPTERS
Fiber
Optics
Part Number
Plug
Contacts
Connectors
90° Quadrax Receptacle and Plug Transition Adapter
21-033836-031
Ethernet, gigabit Ether
21-033836-041
Ethernet, gigabit Ether
21-033836-051
Ethernet, gigabit Ether
Ethernet, gigabit Ether
21-033837-091 (straight)
Suggested Numbering for Transition
Adapters with Quadrax Contacts
26482
100
21-033837-041 (90 degree)
21-033837-051 (straight)
Ethernet, gigabit Ether
21-033837-061 (straight)
ORIENTATION
KEY
Matrix 2
Matrix|Pyle
83723 III
Pyle
26500
Electrical
Protocol††
21-033837-081 (90 degree)
21-033837-141 (90 degree)
21-033837-101
1
4
4
1
2
3
3
2
1000 Base CX,
Fibre channel
21-033836-021
21-033837-021 (90 degree)
21-033837-211 (jam nut)
21-033837-031 (straight)
1000 Base CX,
Fibre channel
150
21-033837-071 (90 degree)
21-033837-111
TRANSITION ADAPTER
PLUG
MATING FACE
90° RECEPTACLE
TRANSITION ADAPTER
MATING FACE
Crimp Rear
Release
Matrix
5015
Impedance
(Ohms)
21-033836-061
EMI Filter
Transient
Cables
Receptacle
ELECTRICAL PROTOCOLS FOR
DIFFERENTIAL TWINAX TRANSITION ADAPTERS
Part Number
Plug
Receptacle
Impedance
(Ohms)
Electrical
Protocol††
21-033832-81
21-033832-21
Ethernet
Class L
22992
21-033833-021 (90 degree)
21-033833-031 (90 degree)
Ethernet
21-033833-151 (90 degree)
21-033832-111†
100
Options
Others
BackShells
21-033833-161† (90 degree)
21-033833-171† (90 degree)
21-033833-091 (90 degree)
21-033833-051 (90 degree)
21-033833-141 (90 degree)
90° Differential Twinax Receptacle and Plug Transition Adapter
TRANSITION ADAPTER DATA
Finish of mating contact parts: Contacts are supplied gold plated per
ASTM B488 Type II, Code C, .000050 min. thick over nickel plate per
AMS-QQ-N-290, Class 2, .000030/.000150 thick.
234
21-033832-91
21-033833-111 (90 degree)
21-033833-181† (90 degree)
150
21-033833-101 (90 degree)
† Consult Amphenol Aerospace for current release of this adapter.
††Test reports available for indicated protocols; consult Amphenol Aerospace.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Amphenol
Aerospace
Quadrax Transition Adapters
For Attachment to PC Boards
Application Data
38999
100 OHM QUADRAX TRANSITION ADAPTERS
FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALS TO PC BOARDS
Part Number
Quadrax Type Adapter/
Cable or PCB Tail Length
Illustration of Adapter
(Termination Instruction Sheet)**
Plug
Quadrax Plug Adapter/
Tensolite NF24Q100, NF24Q100-01
24443/9P025X-4(LD) S280W502-4
24443/03130X-4(LD) Thermax
956-4TN
Quadrax Plug Adapter/
Tensolite NF22Q100, NF22Q100-01,
Thermax 956-5, Tensolite
24450/030894-4(LD) Draka Fileca
F-4704-5
Quadrax Plug Adapter/
Draka Fileca F-4703-3, F-4704-4
Quadrax Plug Adapter/
NF26Q100
Inner Contact
Outer Contact
21-033836-041
(L-2119-W)†
21-033836-051
(L-2119-Y)
High
Speed
21-033836-061
(L-2119-AM)†
21-033836-101
21-033836-131
21-033836-081
100
21-033836-111
M22520/2-01
with Positioner
M22520/2-37
or with
Daniels Positioner
K709
M22520/5-01
with Die Set
M22520/5-45
(Location A)
NA
NA
M22520/2-01
with Positioner
M22520/2-37
or with
Daniels
Positioner
K709
M22520/5-01
with Die Set
M22520/5-45
(Location A)
Fiber
Optics
Contacts
Connectors
Cables
EMI Filter
Transient
Mating plugs and receptacles
21-033836-071
.375
21-033837-081
(L-2119-AR)†
PCB Quadrax Receptacle Straight
Adapter/Special Tail Length (.200)
21-033837-061
Pyle
21-033837-051
26500
PCB Quadrax Receptacle Straight
Adapter/Tail Length .110
21-033837-131
21-033837-291
5015
Crimp Rear
Release
Matrix
21-033837-201
Matrix|Pyle
21-033837-041
83723 III
(L-2119-BL)
26482
21-033837-091
Matrix 2
21-033837-261
PCB Quadrax Receptacle 90 Degree
Adapter/Tail Length .200
21-033837-141
Wired to board
Class L
(L-2119-BB)†
21-033837-231
21-033837-101
(L-2119-AN)
Daniels crimping tools are available from Daniels Mfg. Corp. 6103 Anno
Ave., Orlando, FL 32809
** Termination instructions are packaged with each contact and can be found on-line at:
www.amphenol-aerospace.com/serviceinstructions.asp
† Consult Amphenol Aerospace for current release of this adapter and
instruction sheet if applicable.
See electrical protocols for transition adapters on page 234.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Options
Others
21-033837-241
BackShells
100
22992
Straight adapter Tail Length .175
PCB Quadrax Receptacle Straight
Adapter/Tail Length .110 except .019”
diameter inner contact tails
Quadrax Receptacle 90 degree
Adapter with cable to board/
NF24Q100 Tail Length .110
Quadrax Receptacle 90 degree
Adapter with cable to board/
ABS1503KD24 Tail Length .110
Tensolite NF22Q100-01 Thermax
956-5 Draka Fileca F4704-5
Quadrax Receptacle Straight Adapter
with cable to board/
NF24Q100, NF24Q100-01 Tail
Length .195
Quadrax receptacle straight adapter
w/ cable to board, Tail length .195
Draka Fileca F-4703-3, F-4703-4
Crimping Tools
(L-2119-U)
Gore ACN1042 (28 awg) Gore
RCN8973
Quadrax Plug Adapter/
Hexnut with Lock Wire Holes
Tensolite RCN8467
Tensolite NF24Q100-01
Quadrax Receptacle Straight Adapter
in-line jam nut (threaded)/
GSC-10-8273900
Quadrax Receptacle Straight Adapter
in-line jam nut (threaded) Tensolite
NF24Q100-01
Quadrax Receptacle Straight Adapter
in-line (threaded)/NF24Q100
Tensolite NF24Q100-01, Tensolite
24443/9P025X -4 (LD), S280W502-4,
Tensolite 24443/03130X-4 (LD),
Thermax 956-4TN
PCB Quadrax Receptacle 90 Degree
Adapter/Tail Length .110
Mating
Thread
Size
21-033836-031
Gore RCN8724 (30 awg)
Gore RCN 8422
Receptacle
Impedance
(Ohms)
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
235
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
PCB Quadrax Receptacle 90 Degree
Adapter/Tail Length .110
PCB Receptacle 90 Degree Adapter/
Tail Length .200
Contacts
Connectors
Quadrax Receptacle Straight Adapter
with cable to board/
Tensolite 26473/02006X-4 (LD)
Mating
Thread
Size
(L-2119-S)
150
21-033837-251
Outer Contact
NA
.375
NA
21-033837-031
21-033837-211
(L-2119-BY)
(L-2119-AI)†
150
21-033837-111
(L-2119-AP)
M22520/2-01
with Positioner
M22520/2-34
M22520/5-01
with Die Set
M22520/5-45
(Location A)
** Termination instructions are packaged with each contact and can be found on-line at:
www.amphenol-aerospace.com/serviceinstructions.asp
† Consult Amphenol Aerospace for current release of this adapter and
instruction sheet if applicable.
See electrical protocols for transition adapters on page 234.
Matrix|Pyle
Daniels crimping tools are available from Daniels Mfg. Corp. 6103 Anno
Ave., Orlando, FL 32809
21-033837-071
Pyle
Crimp Rear
Release
Matrix
BackShells
Class L
22992
5015
Inner Contact
21-033837-021
Options
Others
236
Crimping Tools
M22520/2-01
with Positioner
M22520/2-34
21-033836-021
Quadrax Receptacle Straight Adapter
in-line Jam Nut (threaded) Tensolite
26473/02006X-4 (LD), Gore
RCN8328
Quadrax Receptacle 90 degree
Adapter with cable to board/
Tensolite 26473/02006X-4
Receptacle
Impedance
(Ohms)
26500
83723 III
26482
Matrix 2
EMI Filter
Transient
Cables
PCB Quadrax Receptacle Straight
Adapter/Tail Length .110
(Termination Instruction Sheet)**
Plug
Wired to board
Fiber
Optics
Part Number
Illustration of Adapter
Mating plugs and receptacles
Quadrax Plug Adapter/
Tensolite 26473/02006X-4(LD), Gore
RCN8328
High
Speed
For Attachment to PC Boards
Application Data
150 OHM QUADRAX TRANSITION ADAPTERS
FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALS TO PC BOARDS
Quadrax Type Adapter/
Cable or PCB Tail Length
Accessories
Aquacon
Herm/Seal
PCB
Quadrax Transition Adapters
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Amphenol
Aerospace
Differential Twinax Transition Adapters
For Attachment to PC Boards - Application Data
38999
100 OHM DIFFERENTIAL TWINAX TRANSITION ADAPTERS
FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALS TO PC BOARDS
Part Number
Differential Twinax Type Adapter/
Cable or PCB Tail Length
Differential Twinax Plug Adapter/
Tensolite CAN22TDT120 (120 Ohm)
PCB Differential Twinax Receptacle 90
degree Adapter/Tail Length .283
21-033832-021
(L-2119-P)
21-033833-021
100
Inner Contact
Outer Contact
M22520/2-01
with Positioner
M22520/2-34
M22520/5-01
with Die Set
M22520/5-05
(Location B)
N/A
N/A
M22520/2-01
with Positioner
M22520/2-34
M22520/5-01
with Die Set
M22520/5-45
(Location A)
.3125
21-033833-031
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
21-033833-151
21-033832-111†
21-033833-161†
100
Fiber
Optics
Contacts
.375
21-033833-171†
High
Speed
Connectors
N/A
N/A
M22520/2-01
with Positioner
M22520/2-34
M22520/5-01
with Die Set
M22520/5-45
(Location A)
Cables
21-033833-091
(L-2119-AF)
N/A
21-033833-141
(L-2119-BU)
Plug
Receptacle
Impedance
(Ohms)
Mating
Thread
Size
21-033833-181†
21-033833-101
(L-2119-BM)†
150
N/A
M22520/5-01
with Die Set
M22520/5-45
(Location A)
N/A
N/A
N/A
N/A
M22520/2-01
with Positioner
M22520/2-34
M22520/5-01
with Die Set
M22520/5-45
(Location A)
Options
Others
Mating plugs and receptacles
.375
M22520/2-01
with Positioner
M22520/2-34
BackShells
Wired to board
150
Outer Contact
Class L
21-033833-111
Inner Contact
22992
Differential Twinax Receptacle
90 degree Adapter with cable to
board/
Tensolite 26483/03071X-2
(L-2119-BR)
Crimping Tools
5015
21-033832-091
PCB Differential Twinax
Receptacle Straight Adapter/
Tail Length .110
PCB Differential Twinax
Receptacle 90 Degree Adapter/
Tail Length .110
(Termination Instruction Sheet)**
Crimp Rear
Release
Matrix
Differential Twinax Plug Adapter/
Tensolite 26483/03071X-2
Part Number
Illustration of Adapter
Pyle
Differential Twinax Type Adapter/
Cable or PCB Tail Length
26500
150 OHM DIFFERENTIAL TWINAX TRANSITION ADAPTERS
FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALS TO PC BOARDS
Matrix|Pyle
100
83723 III
(L-2119-V)
26482
21-033833-051
Matrix 2
Differential Twinax Receptacle 90
degree Adapter (low profile) with cable
to board/ Tensolite 24463/9P026X-2
Differential Twinax Receptacle 90
degree Adapter with cable to board/
Tensolite 24463/9P025X-2
Differential Twinax Receptacle 90
degree Adapter with cable to board/
Tensolite 24463/9P025X-2
(L-2119-AJ)
Crimping Tools
EMI Filter
Transient
PCB Differential Twinax Receptacle
Straight Adapter/Tail Length .283
Receptacle
Mating
Thread
Size
21-033832-081
Mating plugs and receptacles
PCB Differential Twinax Receptacle
Straight Adapter/ Tail Length .110
PCB Differential Twinax Receptacle
Straight Adapter/ Tail Length .165
Plug
Mating plugs and receptacles
PCB Differential Twinax Receptacle 90
Degree Adapter/ Tail Length .110
(Termination Instruction Sheet)**
Wired to board
Differential Twinax Plug Adapter/
M17/176-00002 (77 ohms)
24463/9P026X-2
Differential Twinax Plug Adapter/
Tensolite 24463/9P025X-2(LD)
10-646060
Illustration of Adapter
Impedance
(Ohms)
** Termination instructions are packaged with each contact and can be found on-line at:
www.amphenol-aerospace.com/serviceinstructions.asp
† Consult Amphenol Aerospace for current release of this adapter and instruction
sheet if applicable. See electrical protocols for transition adapters on page 234.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
237
Amphenol
Aerospace
Micro D-Twinax Transition Adapters
Push-Pull Quick Disconnect Interconnects
38999
III
HD
Dualok
II
I
SJT
Micro Differential Twinax Transition Adapters
New/Featured
Amphenol now offers differential twinax transition adapters in smaller sizes that
provide matched impedance interconnection to PCB boards. Our unique
push-pull quick disconnect adapter design offers:
• Advantages over traditional threaded type adapters
• Launching of controlled impedance (100 ohm) signals for
high speed twinax contacts with push-pull quick disconnect coupling
• Rugged construction, 100+ mating cycles for reliable and secure
data transmission
• Miniature size for tighter spacing on boards
• Intermountability with existing threaded solutions having the same
PCB tail footprint
Accessories
Aquacon
Herm/Seal
PCB
Micro D-Twinax Transition Adapters
Shown right: Straight receptacle mated to plug
Shown left: Jam nut and 90° receptacles
Styles include:
• Plug - standard length and extended length options
• Straight PCB receptacle, 90° PCB receptacle
Fiber
• Two jam nut receptacle styles - both with standard length
Optics and extended length options
• Bushing assembly 90° adapter (used with plug or jam nut receptacle)
High
Speed
Contacts
Connectors
Micro D-Twinax Transition Adapter Plug
.719 REF.
.245 DIA.
REF.
Part Number
Matrix|Pyle
Impedance
(Ohms)
Cable Type*
21-033832-151
Calmont 3007-1923-12-7
Tensolite 26453/03184X-2LD
21-033832-161
100
Thermax 956-626Z
21-033832-121** Calmont 3007-1923-12-7
* See page 240 for information on other cable terminations.
** Same as -151 with extended ferrule for added cable support
5015
Crimp Rear
Release
Matrix
Pyle
26500
83723 III
26482
Matrix 2
EMI Filter
Transient
Cables
Micro D-Twinax Transition Adapter Straight PCB Receptacle
.020 ±.001 DIA.
PCB TAILS
2 PLACES
.433 REF.
.050
Class L
22992
.110 REF.
Straight receptacle
mated to plug
.100
.290 DIA.
REF.
.0223 ±.0010 SQUARE
OR
.0290 ±.0010 DIA. ROUND
PCB TAILS, 4 PLACES
.100
21-033833-191
Options
Others
BackShells
Part Number
All dimensions for reference only.
238
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Impedance
(Ohms)
100
Micro D-Twinax Transition Adapters
Push-Pull Quick Disconnect Interconnects
Amphenol
Aerospace
90 Degree
receptacle mated
to plug
Micro D-Twinax Transition Adapter 90° PCB Receptacle
.244
REF.
.484
REF.
.305
REF.
Impedance
(Ohms)
Part Number
21-033833-201
.020 ±.001 DIA.
PCB TAILS 2 PLACES
100
21-033833-281
.140 PCB tail length
.110 REF.
38999
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
High
Speed
Fiber
Optics
.100
.050
.0223 .0010 SQUARE
OR
.0290 ±.0010 DIA. ROUND
PCB TAILS, 4 PLACES
Contacts
.100
Connectors
Cables
EMI Filter
Transient
Micro D-Twinax Transition Adapter Jam Nut Receptacles
Jam Nut Receptacle, Style 1
21-033833-241
.235
FLAT
MAX.
21-033833-261
21-033833-211**
Calmont 3007-1923-12-7
Tensolite 26453/03184X-2LD
Thermax 956-626Z
100
Calmont 3007-1923-12-7
Pyle
* See page 240 for information on other cable terminations.
** Same as -241 with extended ferrule for added cable support
LOCK WASHER
.375-24 UNS-2A
THREAD
.405 REF.
.150
PANEL
MAX.
Jam nut receptacle,
Style 2, mated
to plug
Part Number
21-033833-251
All dimensions for reference only.
.425 HEX NUT
.425 HEX
LOCK WASHER
21-033833-231**
Impedance
(Ohms)
Calmont 3007-1923-12-7
Tensolite 26453/03184X-2LD
Thermax 956-626Z
100
Calmont 3007-1923-12-7
Options
Others
21-033833-271
Cable Type*
BackShells
.339
FLAT
MAX.
Class L
.545 REF.
22992
Has a larger diameter front shell than Style 1. Requires a larger
mounting D-hole in panel.
5015
Crimp Rear
Release
Matrix
Jam Nut Receptacle, Style 2
.450 DIA. REF.
2 PLACES
26500
.3125 HEX
.3125 HEX NUT
Impedance
(Ohms)
Cable Type*
Matrix|Pyle
Part Number
83723 III
.250-36 UNS-24
THREAD
.405 REF.
.200
PANEL
MAX.
26482
.559 REF.
Matrix 2
Jam nut receptacle,
Style 1, mated
to plug
Smaller diameter front shell requires a smaller mounting D-hole
dimension in panel.
* See page 240 for information on other cable terminations.
** Same as -251 with extended ferrule for added
cable support
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
239
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
Micro D-Twinax Transition Adapters
Push-Pull Quick Disconnect Interconnects
90° Bushing Assemblies for use with Wired
Micro D -Twinax Transition Adapters
To facilitate tight cable bend requirements, Amphenol provides 90°
bushing assemblies which convert straight plug and receptacle
wired adapters into 90° wired adapters.
Accessories
Aquacon
Herm/Seal
PCB
90° Bushing Assembly with
Jam Nut Micro D Transition Adapter
.531 REF.
.210
REF.
High
Speed
90° Bushing Assembly
Part Number
.210
REF.
Fiber
Optics
21-033425-201
90° bushing assembly is ordered separately.
Adapters are not included with bushing assembly.
.435
REF.
Contacts
Connectors
Illustrations below show how the 90° bushing assembly
attaches to either a plug or a jam nut receptacle adapter.
1.264
REF.
1.019
REF
90 BUSHING
ASSEMBLY
5015
Crimp Rear
Release
Matrix
90° BUSHING
ASSEMBLY
.563 REF.
.563 REF.
.668 REF.
.668 REF.
90° Bushing Assembly with Wired Micro D Plug
Transition Adapter
BackShells
Class L
22992
JAM NUT RECEPTACLE
TRANSITION ADAPTER
PLUG TRANSITION
ADAPTER
Matrix|Pyle
Pyle
26500
83723 III
26482
Matrix 2
EMI Filter
Transient
Cables
90° Bushing Assembly with Wired Micro D Jam Nut
Receptacle Transition Adapter
Options
Others
Amphenol transition adapters are capable of terminating to additional 100 Ohm
cables beyond what are listed in the charts on pages 1 and 2. Cables need to
have the following dimensions:
• .0210/.011 Dia. stranded center conductor (26/30 AWG)
• .045 Dia. max. inner wire insulation
• .115 Dia. max. outer braid (round type preferred)
• .150 Dia. max. jacket
Consult Amphenol Aerospace for other cable termination possibilities.
All dimensions for reference only.
240
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Amphenol
Aerospace
Insert Arrangements - MIL-DTL-38999, Series III
Incorporating Quadrax & Differential Twinax Contacts
38999
This illustrated listing represents the most readily available patterns incorporating quadrax and differential twinax contacts within
D38999, Series III connectors. If you require other arrangements than what are shown here, consult Amphenol for further availability. In
most cases, unless otherwise stated, size 8 cavities can be filled with quadrax or differential twinax contacts. Arrangements can be
mixed with any size 8 coax, and/or concentric twinax or triax contacts.
Front face of pin inserts illustrated
1
A
1
17
A
B
D
8
2
7
9
3
10
6
11
17-2
17-22
4
6
B
C
30
5
Insert Arrangement
9-5
17-52
Number of Contacts
1
38
1
2
2
2
8
2
Contact Size
8
22D
8 Twinax
12
8
8
22D
8
Grounded
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
17-60
High
Speed
Fiber
Optics
Meets Boeing
Specification
Contacts
Connectors
Cables
A
V
B
S
N
S
G
19-18
Insert Arrangement
Number of Contacts
Contact Size
N
K
R
M
11
K
E
F
8
10
A
C
B
7
9
19-31
D
5
19-AB
8
19-AD
21-75
14
4
12
1
2
4
16
1
4
22D
8
22D
12
8
8
20
8
8
Pyle
29
22
16
24
1
A
B
R
18
B
E
C
P
F
32
G
F
60
94
81
33
26
6
53
68
82
76
99
93
15
21
28
23-6
78
84
25-7
17
2
6
97
2
22D
8
8
22D
8
Options
Others
CONTACT LEGEND
8
10
Quadrax or
Differential Twinax
12
BackShells
Contact Size
H
21-79
Insert Arrangement
Number of Contacts
K
42
67
Class L
L
C
D
E
59
22992
M
V
J
41
75
19
U
85
25
D
N
79
74
5015
S
A
72
Crimp Rear
Release
Matrix
7
T
64
46
26500
Note: 19-AB same as
19-18 but no 22D contacts.
Ground plane only.
Matrix|Pyle
J
3
4
83723 III
F
2
12
E
H
1
A
13
g
h
D
16
14 15
B
P
B
26482
K
C
Matrix 2
L
A
C
T
U
M
f
W
U
EMI Filter
Transient
R
P
16
20
22D
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
241
Amphenol
Aerospace
Insert Arrangements - for MIL-DTL-38999
Incorporating Quadrax & Differential Twinax Contacts
38999
III
HD
Dualok
II
I
SJT
Front face of pin inserts illustrated
U
b
C
Z
p
F
Contacts
E
M
F
h
1
E
F
2
W
L
V
G
H
K
H
J
J
K
D
U
6
7
3
X
G
X
L
4
Y
N
T
5
W
g
Y
M
Fiber
Optics
k
m
N
D
E
f
u
v
n
P
e
t
w
C
Z
P
D
s
r
q
R
H
B
R
V
d
c
A
S
C
S
G
High
Speed
B
a
B
Accessories
Aquacon
Herm/Seal
PCB
A
T
A
Insert Arrangement
25-8
Number of Contacts
8
36
25-17
6
10
13
25-20
3
4
Contact Size
8
22D
8
20
16
8
12
Connectors
EMI Filter
Transient
Cables
26482
Matrix 2
1
12
Matrix|Pyle
3
13
11
19
18
10
83723 III
V
24
17
20
14
21
25
23
22
15
16
9
4
t
a
R
n
P
5
D
D
A
7
2
b E
S p
z
m
N
w
y
k
M
7
g
h
f
K
L
e
F
c
d
x
6
3
C
G
B
H
J
5
4
Pyle
26500
C
Z
q
6
8
Y
v
AA
r
1
B
X
u
s
U
T
8
A
W
2
25-26
5015
25-46
25-62
Number of Contacts
16
5
4
40
4
2
8
4
Contact Size
20
12
8
20
16
8
16
8
Ground plane only
Options
Others
BackShells
Class L
22992
Crimp Rear
Release
Matrix
Insert Arrangement
CONTACT LEGEND
242
8
10
Quadrax or
Differential Twinax
12
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
16
20
22D
Amphenol
Aerospace
How to Order 38999, Series III Circular
With Quadrax 100 Ohm Contacts
38999
Amphenol Tri-Start, 38999 Series III* Connectors can be ordered with the following popularly used Quadrax contacts:
100 ohm quadrax 21-033385-051 socket contacts
100 ohm quadrax 21-033384-051 pin contacts
Use the following coded number ordering procedure :
1.
2.
Connector Type
Shell Type
TVP
3.
Service Class
00
4.
Shell Size –
Insert Arrangement
RQW
5.
Contact Type
21–75
Step 1. Select a Connector Type
TV
Tri-Start Series Connector with metal shells
TVP
Back panel mounted receptacle with metal shells
CTV
Tri-Start Series Connector with composite shells
CTVP
Back panel mounted receptacle with composite shells
Step 2. Select a Shell Style
Wall mount receptacle
02
Box mount receptacle available only with the PCB
tails and epoxy backfilled (non-removable)
06
Straight plug
07
Jam nut receptacle
For ordering of connectors with
any other quadrax contacts or
differential twinax contacts,
please consult Amphenol
Aerospace for part numbers.
Alternate Keying
Position
P
B
Step 6. Select an Alternate Keying Position
Locksmith keying–rotation of minor keys. See Series III Alternate
Positions below “N” not required for normal position
Tri-Start Alternate
Positions
A plug with a given rotation
letter will mate with a
receptacle with the same
rotation letter. The angles for
a given connector are the
same whether it contains
pins or sockets. Inserts are
not rotated in conjunction
with the master key/keyway.
RECEPTACLE
(front face shown)
˚
AR
BSC
˚
BR
BSC
˚
DR
BSC
Connectors
˚
CR
BSC
PLUG
(front face shown)
˚
BP
BSC
Corrosion resistance stainless steel
140
132
118
140
155
131
215
248
230
205
234
197
265
320
312
275
304
240
RGQK
Stainless steel ground plane
QDT
Durmalon plated, Nickel-PTFE alternative to cadmium
GQDT
Groundplane Durmalon
11, 13,
and 15
N
A
B
C
D
E
95
113
90
53
119
51
141
156
145
156
146
141
208
182
195
220
176
184
236
292
252
255
298
242
QDZ
Zinc Nickel Black Conductive
17and19
N
A
B
C
D
E
80
135
49
66
62
79
142
170
169
140
145
153
196
200
200
200
180
197
293
310
244
257
280
272
Step 4. Select a Shell Size and
Insert Arrangement
See insert arrangements available with quadrax contacts on
preceding pages. Shell Size and Insert Arrangements are together in one
chart. First number represents Shell Size, second number is the Insert
Arrangement
21, 23,
and 25
N
A
B
C
D
E
80
135
49
66
62
79
142
170
169
140
145
153
196
200
200
200
180
197
293
310
244
257
280
272
25L, 33,
and 37
N
A
B
C
D
E
80
135
49
66
62
79
142
170
169
140
145
153
188
188
188
188
188
188
293
310
244
257
280
272
Step 5. Select Contact Type
P
Pin contacts
S
Socket contacts
* The incorporation of quadrax or differential twinax contacts requires a
modified connector to accommodate keyed contacts.
Options
Others
105
102
80
35
64
91
BackShells
9
N
A
B
C
D
E
Class L
DR°
or
DP°
BSC
22992
CR°
or
CP°
BSC
5015
BR°
or
BP°
BSC
Pyle
AR°
or
AP°
BSC
26500
Key & Keyway
Arrangement
Identification Letter
Crimp Rear
Release
Matrix
Shell
Size
RGQW Olive drab cadmium plated ground plane
RQK
˚
DP
BSC
Matrix|Pyle
Olive drab cadmium plate
˚
CP
BSC
83723 III
RQW
˚
AP
BSC
26482
Electroless nickel plated ground plane
Cables
MAIN
KEYWAY
Matrix 2
Electroless nickel plated
RGQF
Fiber
Optics
Contacts
Step 3. Select a Service Class with Quadrax
RQF
High
Speed
MAIN
KEYWAY
EMI Filter
Transient
00
6.
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
For more information on Tri-Start, MIL-DTL-38999 Series III connectors see the section in this catalog.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
243
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
Large crimping area assures low contact resistance and high
tensile strength
Back insulator positively captivates inner contact against
axial loads
Front insulator provides closed entry for socket inner contact
Recessed inner contact is protected
Outer contact has rugged wall section for durability
TYPICAL SUBMINIATURE COAX
SOCKET CONTACT has socket outer
contact with a pin inner contact
High
Speed
Fiber
Optics
General Description
Amphenol® Coaxial Contacts -Offer several advantages
for reliable interconnection and continued performance:
•
•
•
•
•
Accessories
Aquacon
Herm/Seal
PCB
Coaxial Contacts for MIL-DTL-38999
TYPICAL SUBMINIATURE COAX
PIN CONTACT has pin outer con
tact with a socket inner contact
Jacket
Contacts
Insulation
Connectors
MIL-DTL-38999 LJT-R, JT-R, TV-R, SJT-R MS Type,
Coax Size 12 Socket Assembled Contact
Braid
Center
Conductor
Cable Illustration - Coax Contact
Matrix|Pyle
MIL-DTL-38999 LJT-R, JT-R, TV-R, SJT-R MS Type,
Coax Size 16 Pin Unassembled Contact
Options
Others
244
Finish of mating contact parts: supplied with 0.000050 min. gold over nickel
on mating parts. Other finishes are available; consult Amphenol for further
information.
Coax Size 12 & 16 Contact Performance:
• Typical VSWR: 1.5:1 maximum up to 700 MHz and 500 MHz
respectively, for properly cabled size 12 and 16 coaxial contacts in the
M38999 Series I, II and III
• Insulation Resistance: 5,000 megohms minimum @ 25°C
• Dielectric Withstanding Voltage:
Size 12: 1,000 VAC Rms @ sea level, 250 VAC Rms @ 50,000 ft.
Size 16: 800 VAC Rms @ sea level, 250 VAC Rms @ 50,000 ft.
MIL-DTL-38999 LJT-R, JT-R, TV-R, SJT-R MS Type,
Coax Size 8 Pin Assembled Contact
BackShells
Class L
22992
5015
Coax Contacts are gold plated, crimp termination
Crimp Rear
Release
Matrix
Pyle
26500
83723 III
26482
Matrix 2
EMI Filter
Transient
Cables
• Contact Resistance: See MIL-C-39029/27, /28, /75, /76, /77, /78
Coax Size 8 Contact Performance:
• Typical VSWR when terminated to specified 50 ohm cable:
1.5:1 maximum up to 3 GHz (excluding 21-033101/2-27)
• Insulation Resistance: 5,000 megohms minimum @ 25°C
• Dielectric Withstanding Voltage:
1,300 VAC Rms @ sea level, 250 VAC Rms @ 50,000 ft.
• Contact Resistance: See MIL-C-39029/59, /60
MIL-DTL-38999 LJT-R, JT-R, TV-R, SJT-R MS Type,
Coax Size 8 Socket Unassembled Contact
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Amphenol
Aerospace
Coaxial Contacts for MIL-DTL-38999
Application Data
38999
JT-R Series, MIL-DTL-38999 Series II,
SAE AS39029 (27, 28, 76, 78)
COAX CONTACTS FOR USE IN JT-R CONNECTORS
Contact Part Number
Cable
(Termination Instruction Sheet)**
RG-178B/U, RG-196A/U
Haveg
30-00761, 30-02024,
30-02033
Tensolite
24713/A955KK1, 26723/
A955KK1
Haveg 61-02051
(L-2035-AP)
21-033122-561†
21-033121-561†
21-033122-563
(M39029/76-424)
21-033121-563
(M39029/78-432)
21-033122-546
(M39029/28-211)
21-033121-546
(M39029/27-210)
(L-2035-F)
16
(L-2035-AL)
Removal
M22520/4-01
with Positioner
M22520/4-02
M81969/8-07
or
M81969/14-03
or
Amphenol
11-8674-16
11-8794-16
or
MS27495A16
or
MS27534-16
M81969/8-08
or
M81969/14-03
or
Amphenol
11-8675-16
11-8795-16
or
MS27495R16
or
MS27534-16
M22520/2-01
with Positioner
M22520/2-35
or with
Daniels Positioner
K532
21-033122-544
21-033121-544
21-033122-545
21-033121-545
21-033122-547†
21-033121-547†
(L-2035-M)
(L-2035-R)
(L-2035-U)
(L-2035-X)
(L-2035-E)
12
(L-2035-N)
(L-2035-S)
M22520/2-01
with Positioner
M22520/2-34
or with
Daniels Positioner
K323
M22520/31-01
with Positioner
M22520/31-02
or
Daniels GS-200
Tool
with Positioner
G2P330
M81969/8-09
or
M81969/14-04
or
Amphenol
11-8674-12
11-8794-12
or
MS27495A12
or
MS27534-12
M81969/8-10
or
M81969/14-04
or
Amphenol
11-8675-12
11-8795-12
or
MS27495R12
or
MS27534-12
(L-2035-V)
(L-2035-Y)
Pyle
All contacts mate with other contacts in this series which have the same inner and outer contact diameters.
Daniels crimping tools are available from:
Daniels Mfg. Corp. 6103 Anno Ave., Orlando FL 32809
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Options
Others
Finish of mating contact parts: Contact part numbers shown in the chart above are supplied with 0.000050 min. gold
(Knoop hardness 130-200) over nickel on mating parts. Other finishes are available; consult Amphenol.
BackShells
Socket 21-033123-564 on RG-196A/U cable will mate with
pin 21-033122-563 on RG-188A/U cable which is used in
both this and the JT-R series.
Class L
LJT, TV, SJT,
Amphe-Lite
Example:
22992
Socket 21-033121-564 on RG-196A/U cable will mate with
pin 21-033122-563 on RG-188A/U cable which is used in
both this and the LJT-R series.
5015
JT Example:
Crimp Rear
Release
Matrix
NOTE: SAE AS39029 supersedes MIL-C-39029
**Termination instructions are packaged with each contact and can be found on-line at:
www.amphenol-aerospace.com/serviceinstructions.asp
26500
MIL-DTL-38999 CONTACT DATA
Matrix|Pyle
21-033121-543†
Contacts
83723 III
21-033122-543†
Fiber
Optics
Cables
(L-2035-G)
21-033121-541
(M39029/27-402)
High
Speed
Connectors
(L-2035-AE)
21-033122-541
(M39029/28-409)
(L-2035-C)
Insertion
(L-2035-AH)
(L-2035-AN)
(L-2035-AD)
Crimp Ferrule
26482
Gore GWN1159A
21-033121-562†
Inner Contact
Installation Tools
Matrix 2
Raychem 9527A1318
21-033122-562†
(L-2035-AG)
Crimping Tools
EMI Filter
Transient
RG-180B/U, RG-195A/U,
Raychem 9528A1318
Raychem 9530A5314
Socket
21-033121-564
(M39029/78-433)
(L-2035-AK)
RG-174A/U, RG-188A/U,
RG-161/U,
RG-187A/U, RG-316/U,
RG-179B/U,
Haveg 8100207, Times
(HS-179)
AA3248, Teledyne 11299,
Raychem 7528H1424
Raychem 5022E5111
Pin
21-033122-564
(M39029/76-425)
Contact
Size
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
245
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
Contacts
5015
Matrix|Pyle
Options
Others
BackShells
Class L
22992
Crimp Rear
Release
Matrix
Pyle
26500
83723 III
26482
Matrix 2
EMI Filter
Transient
Cables
246
LJT-R, MIL-DTL-38999 Series I; TV-R, MIL-DTL-38999 Series III; Amphe-Lite and SJT-R
Series, SAE AS39029 (28, 59, 60, 75, 76, 77)
Contact Part Number
Contact
Size
Cable
Pin
21-033122-564
(M39029/76-425)
Socket
21-033123-564
(M39029/77-429)
Haveg 30-00761, 30-02024,
30-02033
Tensolite 24713/A955KK1,
26723/A955KK1
21-033122-562†
21-033123-562†
Haveg 61-02051
21-033122-561†
21-033123-561†
RG-174A/U, RG-188A/U,
RG-316/U,
RG-161/U RG-187A/U,
RG-179B/U,
Haveg 8100207, Times
(HS-179)
Raychem 7528H1424
AA3248, Teledyne 11299
21-033122-563
(M39029/76-424)
21-033123-563
(M39029/77-428)
21-033122-546
(M39029/28-211)
21-033123-546
(M39029/75-416)
RG-180B/U, RG-195A/U,
Raychem 9528A1318
21-033122-541
(M39029/28-409)
21-033123-541
(M39029/75-417)
Raychem 5022E5111
21-033122-543†
21-033123-543†
Raychem 9530A5314
21-033122-544†
21-033123-544†
Raychem 9527A1318
21-033122-545†
21-033123-545†
Raychem 9527A1314
21-033122-585
21-033123-585
Gore GWN1159A, Nexans
RG179-DT
21-033122-547
21-033123-547
M/A-Com 5M2869-001
21-033122-589
21-033123-589
RG-178B/U, RG-196A/U
High
Speed
Connectors
Application Data, cont.
COAX CONTACTS FOR USE IN LJT-R, TV-R, AMPHE-LITE AND SJT-R CONNECTORS
Accessories
Aquacon
Herm/Seal
PCB
Fiber
Optics
Coaxial Contacts for MIL-DTL-38999
RG-187A/U, RG-179B/U,
RG-174A/U,
RG-188A/U, RG-316/U,
RG-161/U
Haveg 8100207, Times
(HS-179)AA3248, Teledyne
11299
(L-2035-AG)
(L-2035-AN)
(L-2035-AK) †
(L-2035-AD)
(L-2035-F)
(L-2035-C)
(L-2035-M) †
(L-2035R)
(L-2035-U) †
(L-2035-GG)
(L-2035-X) †
(L-2035-GR)
21-033102-023†
(L-1107-C)
Inner Contact
(L-2035-AR)†
16
(L-2035-AM) †
21-033102-024*
(L-1107-D)
Installation Tools
Crimp Ferrule
Insertion
Removal
M22520/2-01
with Positioner
M22520/2-35
or with
Daniels Positioner
K532
M22520/4-01
with Positioner
M22520/4-02
M81969/8-07
or
M81969/14-03
or
Amphenol
11-8674-16
11-8794-16
or
MS27495A16
or
MS27534-16
M81969/8-08
or
M81969/14-03
or
Amphenol
11-8675-16
11-8795-16
or
MS27495R16
or
MS27534-16
M22520/2-01
with Positioner
M22520/2-34
or with
Daniels Positioner
K323
M22520/31-01
with Positioner
M22520/31-02
or
Daniels
GS-200 Tool
with Positioner
G2P330
M81969/8-09
or
M81969/14-04
or
Amphenol
11-8674-12
11-8794-12
or
MS27495A12
or
MS27534-12
M81969/8-10
or
M81969/14-04
or
Amphenol
11-8675-12
11-8795-12
or
MS27495R12
or
MS27534-12
M22520/2-01
with Positioner
M22520/2-31††
or solder
M22520/5-01
with die set
M22520/5-03 (A)
or M22520/5-08
(A)
M22520/5-35 (B)
or M22520/10-01
with Die Set
M22520/10-05
(A)
M22520/5-01
with die set
M22520/5-05 (A)
or M22520/5-19
(B)
or M22520/10-01
with Die Set
M22520/10-07
(A)
Hand
inserted
11-9170
or
MS
(L-2035-AJ
(L-2035-AF)
(L-2035-H)
(L-2035-D)
(L-2035-P)
(L-2035-T) †
12
(L-2035-W)
(L-2035-GH)
(L-2035-Z) †
(L-2035-GT)
21-033101-023†
(L-1107-G)
8
RG-142B/U, RG-223/U,
SF-142 (solder inner
conductor)
Crimping Tools
21-033101-024*
(L-1107-H)
NOTE: SAE AS39029 supersedes MIL-C-39029
CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part
numbers indicate applicable die closure. Commercial equivalents with the same
die closure dimension may be used.
CHART CONTINUES ON NEXT PAGE
† Consult Amphenol Aerospace for current release of this contact or
instruction sheet if applicable.
†† When inner contact is installed by crimping only. 11-10134 Expander Tool
Kit must be used to assemble rear insulator over contact.
**Termination instructions are packaged with each contact and can be found
on-line at: www.amphenol-aerospace.com/serviceinstructions.asp
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Amphenol
Aerospace
Coaxial Contacts for MIL-DTL-38999
Application Data, cont.
38999
LJT-R, MIL-DTL-38999 Series I; TV-R, MIL-DTL-38999 Series III; Amphe-Lite and
SJT-R Series, SAE AS39029 (28, 59, 60, 75, 76, 77), cont.
COAX CONTACTS FOR USE IN LJT-R, TV-R, AMPHE-LITE AND SJT-R CONNECTORS, CONT.
Contact Part Number
Cable
Haveg 51-03111, Tensolite
28895/2X1
RG-180B/U, RG-195A/U,
Raychem 9528A1318
(Termination Instruction Sheet)***
Pin
Socket
21-033102-022
21-033101-022
(L-1107-B)
21-033102-021
(M39029/60-367
Supersedes
MS27536)
(L-1107-A)
RD-316 Double Shield
(M17/152-00001)
(L-1107-J)
21-033102-026
(L-1107-M)
(L-1107-F)
21-033101-021
(M39029/59-366
Supersedes
MS27535)
21-033101-025
(L-1107-N)
M22520/2-01
with Positioner
M22520/2-31**
or solder
M22520/5-01
with die set
M22520/5-05 (B)
or M22520/5-41
(B)
or M22520/10-01
with Die Set
M22520/10-07 (B)
M22520/2-01
with Positioner
M22520/2-31
M22520/5-01
with Die Set
M22520/5-37 (B)
or
M22520/10-01
with Die Set
M22520/10-15 (A)
21-033102-039
21-033101-036†
FA-19X
21-033652-001
21-033653-001
21-033102-041
21-033101-041
(L-1107-W)
M22520/2-01
with Positioner
M22520/2-31
(L-1107-AB)
(L-2091-B)
† Consult Amphenol Aerospace for current release of this contact or instruction
sheet if applicable
** When inner contact is installed by crimping only. 11-10134 Expander Tool
Kit must be used to assemble rear insulator over contact.
***Termination instructions are packaged with each contact and can be found
on-line at: www.amphenol-aerospace.com/serviceinstructions.asp
BackShells
NOTE: SAE AS39029 supersedes MIL-C-39029
NOTE: Contacts can be ordered by part numbers given in chart
CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part
numbers indicate applicable die closure. Commercial equivalents with the same
die closure dimension may be used.
Solder
M22520/5-01
with Die Set Y25
(B)
M22520/5-01
with Die Set
M22520/5-05 (B)
Class L
(L-1107-AF)
M22520/2-01
with Positioner
K1106
M22520/5-01
with Die Set
M22520/5-05 (B)
or
M22520/10-01
with Die Set
M22520/10-07 (B)
22992
(L-1107-AG)
(L-1107-Q)
5015
5022A1311-0
Solder
M22520/5-01
with Die Set
M22520/5-45 (A)
M22520/5-01
with Die Set
M22520/5-05 (B)
Pyle
21-033101-037
(L-1107-Y)†
M22520/2-01
with Positioner
M22520/2-10
26500
21-033102-037
(L-1293-B)
11-9170 or MS
Matrix|Pyle
21-033101-036†
(L-2091-A)
Cables
83723 III
21-033102-036
(L-1107-AC)
Connectors
26482
21-033101-029
(L-1107-V)
Contacts
Matrix 2
21-033102-029
(L-1107-P)
Fiber
Optics
Crimp Rear
Release
Matrix
RG-58 (M17/155-00001),
M17/028-RG-058 RG303
Times LMR-195-UF
(L-1107-AA)
Removal
High
Speed
Hand
inserted
8
(L-1286-B)
Insertion
(L-1107-M)
21-033101-027
T Flex-402 Utiflex UFB142G
Raychem 7524A1311
Crimp Ferrule
21-033101-026
21-033102-027
5M2869-001
ESC432101 BMS13-65
Inner Contact
Installation Tools
(L-1107-E)
RG-400, ECS3C058A
ECS352001 ECS432101
5021D1331-0
Crimping Tools
EMI Filter
Transient
Raychem 7524D5111-9
(triax cable - contact will
terminate inner coax portion
only)
21-033102-025
Contact
Size
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
Options
Others
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
247
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
The matched impedance coax contact is available in size 12. It incorporates a captivated
inner contact which “snaps into” the outer contact preventing displacement or
pull-back of the inner contact in situations where the cable may be bent.
TYPICAL MATCHED IMPEDANCE
COAX SOCKET CONTACT
has socket outer contact with a captivated
pin inner contact
High
Speed
Contacts
Connectors
26482
Matrix 2
EMI Filter
Transient
Cables
TYPICAL MATCHED IMPEDANCE
COAX PIN CONTACT
has pin outer contact with a captivated
socket inner contact
Design features and benefits of the Matched Impedance:
• For use in 90 degree angle or bent cable applications
• Provides 50 ohm matched impedance resulting in low VSWR
and low insertion loss
• Frequency range for a mated pair extends to 3 GHz and beyond,
higher than other coaxial contacts previously offered.
• Ideally suited for D38999 high performance and MIL-STD-1760
high band coaxial contact requirements
High Performance Size 12 and 8 Coax
50 or 75 Ohm matched
Matrix|Pyle
83723 III
Pyle
26500
5015
Crimp Rear
Release
Matrix
Class L
22992
BackShells
Options
Others
Matched Impedance
Coax Contact Performance:
LJT-R, MIL-DTL-38999 Series I, JT-R, MIL-DTL-38999 Series II, and
TV-R, MIL-DTL-38999 Series III
Use with Cable
248
for MIL-DTL-38999
Amphenol® Matched Impedance Size 12 Coaxial Contacts for
RF/Microwave, High Frequency and High Performance Requirements
Accessories
Aquacon
Herm/Seal
PCB
Fiber
Optics
Matched Impedance Coaxial Contacts
RG316,
T-Flex-405
Semflex SM405
RG-316,
T-Flex-405
RD316,
Filotex,
ET124962,
M17/152-00001
Comment
M39029/102/103
50W
Pin
Socket
21-033651-011
21-033650-011
Electrical Specifications:
• Contact impedance = 50 ohms nominal
• Frequency range = 0–3 GHz Operable at higher
frequencies depending on cable selection.
Consult Amphenol for details.
Contact
(Termination Instruction (Termination Instruction
Size
Sheet)***
Sheet)***
(L-2092-C)
JT-R, MIL-DTL-38999
Series II, 50W
21-033729-011
•
21-033650-017
• Insulation resistance: 5 gigaohms min. @ 25°C
(L-2092-C)
(L-2092-P)
M39029/102/103 Type
50W
21-033651-017
JN1088WT
JN1104*50C
50W
21-033213-042
PAN6422XQ
PAN6841*50C
50W
21-033651-012
21-033650-012
RG178,
Gore CXN 3403
M39029/102/103 Type
50W
21-033651-018
21-033650-018
RG178,
Gore CXN 3403
JT-R, MIL-DTL-38999
Series II, 50W
(L-2092-F)
(L-2092-E)
(L-2092-K)
(L-2092-F)
• VSWR: 1.20 + .04F (F in GHz) max. up to 3 GHz
• Insertion Loss: .11 fGHz dB max.
21-033214-042
Environmental Specifications:
(L-2092-D)
• Thermal limits: –55 ° to 200°C
12
Mechanical Specifications:
• Mating: slide-on
(L-2092-K)
• Mounting: conforms to M39029/102 & /103
envelope dimensions
21-033729-018
(L-2092-K)
21-033651-022
21-033650-022
Dielectric withstanding voltage
(for a mated pair):
At sea level = 1000 VRMS
At 50, 000 ft. = 250 VRMS
SFT-316-TR
M39029/102/103 Type
50W
Semflex SW060
M39029/102/103 Type
50W
21-033651-025
21-033650-025
Semflex SW086
(solid inner
conductor)
M39029/102/103 Type
50W
21-033651-026
21-033650-026
RG-179†
75W
21-033592-001
21-033591-001
8
* Add P or S for pin or socket
** *Termination instructions are packaged with each contact
and can be found on-line at:
www.amphenol-aerospace.com/serviceinstructions.asp
PIC V76261†
75W
21-033592-021
21-033591-021
8
†21-033591-XXX sockets will only mate with Amphenol 210333592-XXX pins
Belden 1855A†
75W
21-033592-031
21-033591-031
8
(L-2092-N)
(L-2092-N)
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Amphenol
Aerospace
Typical Contact Installation Instructions
for Coax Contacts
38999
The following is an example of a contact instruction sheet that would be shipped within the package of contacts for a Crimp, Size 12
Coax Contact for use in Subminiature, D38999 connectors. The sheet provides detailed instructions for assembling the component
parts and for crimping the contact to coaxial cable, along with the recommended cable and tooling to be used. Installation instructions
are included within all contacts for D38999 connectors. For installation instructions for other connector series, there are separate
documents (not included in packaging of parts) as follows: L- 633 for Miniature solder types, L-613 for Miniature SE types, L-660 for
Miniature CE types, and L-650 for MS/Standard and Heavy Duty types. For any other instructions needed, consult Amphenol. Most
installation instructions can be found on-line at www.amphenol-aerospace.com (from home page, go to Service Instructions and enter
contact part number or instruction sheet number).
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
21-033651-011 (PIN)
21-033650-011 (SOCKET)
21-033651-011 (PIN)
21-033650-011 (SOCKET)
.330 REF.
.135
OUTER CRIMP FERRULE
CABLE
OUTER JACKET
.195
High
Speed
A1 & A2
CABLE
DIELECTRIC
CABLE
OUTER BRAID
Fiber
Optics
CABLE OUTER BRAID
.165
A3
CABLE
CENTER
CONDUCTOR
CABLE
DIELECTRIC
Contacts
Connectors
Cables
.165
REF.
EMI Filter
Transient
CABLE CENTER CONDUCTOR
CABLE DIELECTRIC
INNER CONTACT ASSEMBLY
(SOCKET SHOWN FOR REFERENCE)
B
INSPECTION HOLE
CABLE
OUTER BRAID
INNER CONTACT
MUST BUTT INSULATOR
Pyle
26500
5015
Class L
22992
FSCM77820
L-2092-C October 2001
Matrix|Pyle
C
83723 III
OUTER FERRULE
26482
.010 / .030
OUTER CONTACT ASSEMBLY
(PIN SHOWN FOR REFERENCE)
Matrix 2
CABLE DIELECTRIC
MUST BUTT
BUSHING
Crimp Rear
Release
Matrix
Contact, Pin and Socket, Coaxial,
Type LJT-R & TV-R, (MIL-DTL-38999 Series I & III) Crimp,
Size 12
Installation Instructions
See table on reverse side for coaxial cable recommended
and crimp tool information.
A. 1. Slide outer crimp ferrule over cable outer jacket as
shown.
2. Strip cable outer braid as illustrated. Ends must be cut
cleanly and at right angles to the axial plane of the
cable. The cable must not be deformed while making
cuts.
3. Flare outer braid, then strip cable dielectric as shown.
B. 1. Assemble inner contact assembly over cable center
conductor and cable dielectric until inside bore of
bushing butts against cable dielectric.
2. Cable center conductor must be visible through the
inspection hole in the inner contact wire well.
3. Crimp inner contact wire well using crimp tool listed in
table.
C. 1. Carefully slide outer contact assembly over inner
contact assembly and under cable outer braid until
inner contact butts against insulator shoulder as
illustrated. (Inner contact assembly will snap into the
locked position when fully assembled inside the outer
contact assembly.)
2. Bring outer crimp ferrule forward over cable outer
braid as illustrated. (Continue to push the inner
contact assembly fully forward while bringing the
outer crimp ferrule into position.)
3. Crimp outer crimp ferrule using crimp tool listed in
table (.156 Max. over ferrule after crimping). Trim
excess braid ahead of crimp ferrule, if necessary.
CONTACT INSERTION INTO CONNECTOR
Using insertion tool (part number M81969/8-09 or
M81969/14-04), insert contact assembly into rear connector
grommet hole. Contact must be aligned with hole and not
inserted at an angle. Push forward until contact is felt to snap
into position within insert. Remove tool.
CONTACT REMOVAL FROM CONNECTOR
Position removal tool (part number M81969/8-10 or
M81969/14-04) around cable and slide tool down wire until
tool tips enter rear grommet and come to a positive stop.
Hold tool tip firmly against positive stop on contact, grip wire
and simultaneously remove tool, contact and cable.
Tools
21-033651-011
Matched Impedance*
Size 12 Coax
Pin
21-033650-011
Matched Impedance*
Size 12 Coax
Socket
Outer Contact
Crimp Tool
Setting
Positioner
(Daniels)
RG316
(M17/113-RG316)
MH992 (Daniels)
5
K1360
RG179
(M17/094-RG179)
MH992 (Daniels)
4
K1360
RG316
(M17/113-RG316)
MH992 (Daniels)
5
K1360
RG179
(M17/094-RG179)
MH992 (Daniels)
4
K1360
Tool
Positioner
M22520/5-01
M22520/5-03 (A)
or
M22520/5-35 (B)
Options
Others
Description
Inner Contact
BackShells
Coaxial Cable
Accommodated
Amphenol ®
Part Number
* Matched Impedance applies when contacts are terminated to RG316 cable only.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
249
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
High Frequency Contacts for MIL-DTL-38999
Series III Circular General Description
Amphenol® High Frequency Contacts
Amphenol and SV Microwave (an Amphenol company) offer DC to 40 GHz
high frequency size 8, 12 and 16 coaxial contacts for the D38999 Series III
housing and standard inserts. These contacts allow any application to
continue to use the D38999 connector and be able to expand the use to
include the microwave transmission lines. Features include:
• Superior electrical performance and high frequency capability
• Blindmate advantage and maintenance of an accurate phase length
when mated
• Can be terminated to a multiple of cable types depending on the application
• Uses standard interfaces based on MIL-STD-348, and can be installed in
any MIL-DTL-38999 size 8, 12 or 16 insert
• Unique “Float Mount” technology allows for consistent microwave
performance while maintaining tight mechanical tolerances
High
Speed HIGH FREQUENCY CONTACTS
Fiber
Optics
Contacts
Connectors
5015
Matrix|Pyle
Options
Others
BackShells
Class L
22992
Crimp Rear
Release
Matrix
Pyle
26500
83723 III
26482
Matrix 2
EMI Filter
Transient
Cables
250
SPECIFICATIONS
Electrical
(Mated pair size 8 - RG 405 Semi-Rigid Cable)
Impedance 50 W
Frequency Range
DC - 40 GHz
VSWR
1.05 +.01 (freq. GHz)
Insertion Loss
0.03. (freq. GHz)
Insulation Resistance (Min.)
10,000 M W
Contact Resistance (Max.)
Center conductor:
6.0 mW
outer conductor:
3.0 mW
outer to cable:
0.5 mW
Dielectric Withstanding Voltage 1,000 VRMS
Corona Extinction Voltage
250 VRMS
RF High Potential Voltage
500 VRMS
RF Leakage
- (80-freq. GHz)
HIGH FREQUENCY COAX CONTACTS
FOR USE IN D38999, SERIES III CONNECTORS
High Frequency
Amphenol Part
Number
(Termination
Instruction Sheet)
(300-17-008)
21-033448-01HF
Frequency
For use
with Cable
BMZ
40 GHZ
TFLEX-405
21-033448-02HF
18 GHZ
TFLEX-405
BMZ
12 GHZ
RG-400/
RG-142
(300-89-008)
21-033449-04HF
(300-89-002)
Body and Sleeve
Ferrule
Contact & Lock Ring
Insulator
Spring
Rear Body & Contacts
21-033449-06HF
18 GHZ
21-033449-08HF
21-033448-08HF
BMA
26.5 GHZ
TFLEX-405
BMA
26.5 GHZ
TFLEX-402
BMZ75
Ohm
2 GHZ
LMR-24075
SMPM
65 GHZ
TFLEX-405
21-033449-11HF
8
21-033321-009
8
21-033321-010
8
21-033321-007
8
21-033321-010
8
21-033321-008
12
N/A
16
N/A
8
21-033321-007
Pin
SMPS
65 GHZ
0.047 Dia.
Cable
BMZ
2 GHZ
RG179
Socket
Pin
Socket
Pin
Socket
Pin
Socket
21-033449-10HF
21-033448-10HF
21-033321-007
Pin
21-033449-09HF
21-033448-09HF
8
Socket
TFLEX-402
21-033449-07HF
21-033448-07HF
21-033321-007
Socket
BMZ
(300-89-002)
21-033448-06HF
8
Pin
21-033449-03HF
21-033448-03HF
Piggyback
Grommet
Socket
BMZ
(300-89-009)
(300-89-008)
Cavity
Size
Pin
21-033449-02HF
(300-89-009)
Type
Socket
(300-17-008)
21-033448-04HF
Environmental
Interface
21-033449-01HF
Materials and Finish
Stainless steel per
AMS-5640 Alloy UNS
S30300 Type 1
Brass per ASTM B16,
Alloy UNS C36000
Beryllium copper per ASTM
B196 Alloy UNS C17300, Td04
PTFE per ASTM D1710,
Type 1, Grade 1, Class B
Stainless steel per ASTM
A313 Type 631
Gold per ASTM B488 Type II,
Code C, Class 1.27;
over Nickel per AMS-QQ-N-290
Class 1 (60µ inches);
over Copper per MIL-C-14550
(10µ inches)
Passivated per AMS-2700, Type 2
Subminiature MIL-DTL-38999 Series III
Connector with Size 8 High Frequency Contacts
21-033448-11HF
Temperature Range
–65°C to +125°C
Corrosion (Salt Spray) MIL-STD-202, Method 101, Condition B
Vibration
MIL-STD-202, Method 204, Condition D, 20 Gs
Shock
MIL-STD-202, Method 213, Condition 1, 100 Gxs
Thermal Shock
MIL-STD-202, Method 107, Condition B, –65°C to +125°C
Moisture Resistance MIL-STD-202, Method 106, Less step 7B
Barometric Pressure (Altitude) MIL-STD-202, Method 105, Condition C, 70,000 ft.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Pin
Socket
Pin
Socket
Pin
Amphenol
Aerospace
Twinax Contacts for MIL-DTL-38999
General Description, Application Data - Size 10 &12
38999
Amphenol® Twinax Contacts -Were designed for
use with twinax cable in Data Bus systems. Twinax contacts
provide the following benefits:
• Protection from magnetic interference
• Protection from electrostatic interference including nuclear
electromagnetic pulse
• Meets parameters defined by MIL-STD-1553B
• Maintains shield integrity through a multi-pin circular
connector and does not require contact polarization within
the insert
Jacket
Braid
Insulation
Cable Illustration - Twinax Contact
SIZE 10 & 12 CONCENTRIC TWINAX
CONTACTS
The size 12 concentric twinax contact interface was developed for
JN1104 EuroFighter contacts, and can be used in any size 12
cavity M38999 I, II or III or SJT connector.
Features:
• Operating temperature –55°C to 175°C
• Pins are scoop-proof
• Meets performance levels of M38999 connector
• 4 components, gold plated crimp termination
• For use with a variety of cables (See chart below)
Center
Conductor
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
High
Speed
Fiber
Optics
Concentric Twinax Contacts Size 12
Contacts
Connectors
Cables
EMI Filter
Transient
TYPICAL ELECTRICAL PERFORMANCE
Size 10 & 12 Concentric Twinax Contacts
21-033908-025
0024A0024, Fileca
F2709-13-CA
21-033909-028
21-033908-028
EPD32263A,10612,
GSC-12-2548-00
ASNE0849,
5PTM1T04-1
21-033909-029
21-033908-029
(L-2092-G)
(L-2092-G)
(L-2092-G)
(L-2092-G)
21-033909-081
21-033908-081
VG95218T023D002
21-033909-091
21-033908-091
VG95218T023D002,
55PC1221-24
21-033909-101
21-033908-101
(L-2092-AB)
(L-2092-AC)
(L-2092-AB)
(L-2092-AC)
Same as -91 except
new ferrule with wire
support
(L-2092-AC)
21-033640-025
0024A0024
21-033640-028
(L-2092-W)
12
JN1104 Interface
D38999 Series II
10
Supplied with
Thermal fit sleeve
D38999 Series I, III
(L-2092-V)
21-033844-001
(L-1255-A)
21-033843-001
(L-1255-B)
Options
Others
M17/176-00002,
GSC-12-2549-00
5M2022-003
D38999 Series I, III
BackShells
(L-2092-AC)
JN1104 Interface
12
Class L
(L-2092-H)
22992
(L-2092-H)
Connector
Series
5015
21-033909-025
Pyle
Socket
Comments
Crimp Rear
Release
Matrix
Pin
M17/176-00002,
ST5M1212-002,
TWC-78-1
Contact Size
26500
(Termination Instruction Sheet)**
Matrix|Pyle
For use with
Cable
Concentric Twinaxial Contact
Part Number
83723 III
SIZE 10 & 12 CONCENTRIC TWINAX CONTACTS FOR USE IN D38999 CONNECTORS
26482
Unassembled Components of Size
12 Concentric Twinax Contact
Matrix 2
Voltage Rating: 500 Vrms max. @ sea level
Contact Resistance:
Center @ 1 Amp, 55 millivolts max. voltage drop @ 25°C
Intermediate @ 1 Amp, 55 millivolts max. voltage drop @ 25°C
Outer @ 12 Amps, 85 millivolts max. voltage drop @ 25°C
Operating Frequency: 0–30 MHz
Dielectric Withstanding Voltage:
Center to Intermediate 800 VAC Rms @ Sea Level
Intermediate to Outer 500 VAC Rms @ Sea Level
**Termination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
251
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
Contacts
• ARINC 404, ARINC 600 and R27 Series rectangular connectors.
Supplied by Amphenol Canada.
5015
Matrix|Pyle
SIZE 8 CONCENTRIC TWINAX CONTACTS
The size 8 concentric Twinax contact was developed for use in MILSTD-1553 Airborne multiplex data bus applications which require high
performance interconnect characteristics in multi-pin connectors. Ideal
for this application need is the high performance Tri-Start connector with
its fully scoop-proof feature of recessed pins. The concentric Twinax
contact is crimp terminable to twisted shielded cable. Features include:
•
•
•
•
•
•
•
MIL-DTL-38999 Series III Connector with Twinax
Contacts and Standard Contacts
Provides protection from magnetic and electrostatic interference
including nuclear electromagnetic pulse
Maintains shield integrity through a multi-pin circular
connector and does not require contact polarization within the insert
175°C rated and meets performance levels of MIL-DTL-38999
Series III connectors
MIL-C-17/176-00002 cable termination
Gold plated full crimp termination contacts qualified to
M39029/90 & /91
Integral part of the MIL-STD-1760 interconnection system
Also available in modified but intermateable versions for termination
to a host of cables (See chart on next page)
Concentric Twinax Contacts Size 8
TYPICAL ELECTRICAL PERFORMANCE
Size 8 Concentric Twinax Contacts
Voltage Rating: 500 Vrms max. @ sea level
Contact Resistance:
Center @ 1 Amp, 55 millivolts max. voltage drop @ 25°C
Intermediate @ 1 Amp, 55 millivolts max. voltage drop @ 25°C
Outer @ 12 Amps, 75 millivolts max. voltage drop @ 25°C
Operating Frequency: 0–20 MHz
Dielectric Withstanding Voltage:
Center to Intermediate: 1000 VAC Rms @ Sea Level
Intermediate to Outer: 500 VAC Rms@ Sea Level
Options
Others
BackShells
Class L
22992
Crimp Rear
Release
Matrix
Pyle
26500
83723 III
26482
Matrix 2
EMI Filter
Transient
Cables
High performance connectors within the D38999 families are the most
commonly used connectors for incorporation of Twinax contacts. These
connectors offer wide versatility in insert arrangements for not only
concentric Twinax contacts, but also coax, triax, PCB, wire wrap,
thermocouples and EMI filter contacts.
• Wire Integrated Connectors (WICS) for Data Bus Systems.
Consult Amphenol Aerospace, Sidney, NY.
High
Speed
Connectors
General Description, Application Data - Size 8
Other connectors available with concentric Twinax contacts:
Accessories
Aquacon
Herm/Seal
PCB
Fiber
Optics
Twinax Contacts for MIL-DTL-38999
252
SHORT PROFILE TWINAX CONTACT OPTION
A Short Profile size 8 Twinax is available that can be used with a low
profile right angle backshell and can offer increased packaging efficiency.
Consult Amphenol Aerospace for further information.
Short Profile Twinax vs
Standard Length Twinax Contact
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Twinax Contacts for MIL-DTL-38999
General Description, Application Data - Size 8, cont.
Amphenol
Aerospace
SIZE 8 CONCENTRIC TWINAX CONTACTS FOR USE IN D38999 CONNECTORS
38999
Size 8 Concentric Twinaxial Contact
Part Number
(Termination Instruction Sheet)**
For use with
Cable
M17/176-00002
T3-46T08-LD
T3-47T08-LD
(PN-430)
M17/176-00002
21-033190-000
21-033191-000
(L-1253-B)
Without seals
M17/176-00002
21-033190-001
21-033191-001
Supplied with piggyback grommet seal
21-033190-026
21-033191-026†
21-033190-022
21-033191-022
Without seals
21-033190-027
21-033191-027
(L-1253-L)
Supplied with heat shrink seal
21-033190-029
21-033191-029
(L-1253-L)
Supplied with piggyback grommet seal
21-033190-030
21-033191-030
(L-1253-L)
Without seals
21-033190-040
21-033191-040
(L-1253-T)
Supplied with heat shrink sleeve
Axon P517417
21-033190-081
21-033191-081
Supplied with piggyback grommet seal
Raychem 10612, 5M2022-003
21-033190-261
21-033191-261†
Raychem 10612, 5M2022-003
21-033190-262
21-033190-262†
Raychem 10614,
7724C8664
T3-46TB08-LD
T3-47TB08-LD
(PN-494)
Without seals
7820D0111 (20 AWG)
T3-467C08-LD
T3-47TC08-LD
(PN-537)
Without seals
Short profile
Supplied with heat shrink seal (.465)
Short profile
Supplied with heat shrink seal (.465)
Short profile
Without seals (.263)
Short profile
Supplied with piggyback grommet seal (.465)
Short profile
Supplied with heat shrink seal (.465)
(PN-430)
(L-1253-A)
(L-1253-A)
Raychem 10612, 5M2022-003
(L-1253-AA)
(L-1253-C)
(L-1253-K)
(L-1253-K)
(L-1253-K)
(L-1253-S)
(L-1253-W)†
(L-1253-AA)
(L-1253-AA)
(PN-494)
(PN-537)
(L-1253-B)
(L-1253-D)
(L-1253-Y)†
T3-47TE08-LD
M17/176-00002
T3-46TD08-LD
T3-47TD08-LD
M17/176-00002
21-033910-015†
21-033922-015
M17/176-00002
21-033617-001
21-033922-015
Gore CNX2702
T3-46TF08-LD
T3-47TF08-LD
(PN-1001)
(PN-1000)
(PN-1005)
(REF PN-100)
(PN-1002)
Short profile
Without seals (.303)
21-033190-070
21-033191-070
(L-1253-V)
Without seals
21-033190-071
21-033191-071
(L-1253-V)
Supplied with piggyback grommet seal
21-033190-072
21-033191-072
(L-1253-V)
Supplied with heat shrink seal
21-033190-090†
21-033191-090
(L-1253-AD)
Without seals
21-033190-091†
21-033191-091
(L-1253-AD)
Supplied with piggyback grommet seal
21-033190-092†
21-033191-092
(L-1253-AD)
Supplied with heat shrink seal
21-033190-625
21-033191-628
M39029/113-625 & /114-628
Supplied with heat shrink seal
(L-1253-U)
(L-1253-U)
(L-1253-U)
(L-1253-AG)
(L-1253-AG)
D38999
Series I, III
Options
Others
M17/176-00002
(PN-1002)
Supplied with heat shrink seal
BackShells
0024A0311, PIC E1024
(PN-1005)
Cables
Class L
0024A0311, PIC E1024
(PN-1005)
Connectors
22992
0024A0311, PIC E10244
(PN-1000)
Contacts
Supplied with piggyback grommet seal
P-209546-27†
M17/176-00002
S280W502-1, Fileca F2709-13-CA,
HS5930, Raychem 10602 0024G0024,
0024A0024
S280W502-1, Fileca F2709-13-CA,
HS5930, Raychem 10602 0024G0024,
0024A0024 Tensolite 24463/9P025x-2(LD)
S280W502-1, Fileca F2709-13-CA,
HS5930, Raychem 10602 0024G0024,
0024A0024
(PN-1001)
Fiber
Optics
Pyle
T3-46TE08-LD
High
Speed
Crimp Rear
Release
Matrix
Gore CXN2268
Without seals
EMI Filter
Transient
Raychem 10614, EPD22189B,
7724C8664, 05A0771,
GC875TM24H, T10971
Raychem 10613,
PAN711-6421, 23089/RC
Raychem 10613,
PAN711-6421, 23089/RC
Raychem 10613,
PAN711-6421, 23089/RC
GSC-12-2548-00,
7726D0664, ASNE 08072003-09
(L-1253-B)
5015
21-033191-530
(L-1253-A)
(L-1253-AG)
26500
21-033190-529
(L-1253-AG)
Matrix|Pyle
M17/176-00002,
5PTM1T04-2
Comments
AS39029/113-625 & /114-628 (Amphenol)
Supplied with heat shrink seal
AS39029/90/91 (Amphenol)
Supplied with heat shrink seal
M39029/90/91 (Pyle)
Supplied with heat shrink seal
83723 III
21-033191-628
26482
Socket
21-033190-625
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
Matrix 2
Pin
M17/176-00002
Connector
Series
**Termination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp
† Consult Amphenol Aerospace for current release of this contact or instruction sheet if applicable.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
253
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
Triax Contacts for MIL-DTL-38999
General Description, Application Data
Amphenol® Triax Contacts -Provide additional shielding
when terminated to triax cable having solid or stranded center
conductors. Amphenol supplies triax contacts in sizes 8, 10 and 12
and they are ideally suited for use in D38999 Series I, II and III
circular connectors.
Features and benefits of Amphenol triax contacts include:
• Incorporates three conductors, designed for use with triax cable
• Each of the three conductors are separated by dielectric
insulation to isolate ground planes
• Shielding effectiveness is improved with two isolated shields
• May be specified for direct connection to printed circuit boards
• May be mixed with coax, twinax and power contacts in a
single connector
Jacket
Insulation
Center
Conductor
Braid
Cable Illustration - Triax Contact
TYPICAL ELECTRICAL PERFORMANCE
Size 8, 10 and 12 Triax Contacts
Contact Resistance:
High
Speed
Center @ 1 Amp, 120 millivolts max. voltage drop @ 25°C
Intermediate @ 1 Amp, 60 millivolts max. voltage drop @ 25°C
Outer @ 12 Amps, 90 millivolts max. voltage drop @ 25°C
Fiber
Optics
Operating Frequency:
Size 12: 0-30 MHz
Size 10: 0-300 MHz
Size 8:
0-500 MHz
Triax Size 8 Pin Contact
Contacts
Connectors
Cables
EMI Filter
Transient
Dielectric Withstanding Voltage:
Center to Intermediate 800 VAC Rms @ Sea Level
Intermediate to Outer 500 VAC Rms @ Sea Level
Insulation Resistance:
1000 megohms minimum @ 25°C
5015
Matrix|Pyle
Options
Others
BackShells
Class L
22992
Crimp Rear
Release
Matrix
Pyle
26500
83723 III
26482
Matrix 2
Triax Size 12 Socket Contact
SIZE 8, 10 & 12 TRIAX CONTACTS FOR USE IN D38999 SERIES I & III CONNECTORS
For use with
Cable
Size 8, 10, 12 Triax Contact Part Number
Size
5M2397-002, 81264-02, RGX-179, RT-179,
Champlain 81-00321A, Tensolite
28883/02060X-1(LD),
7528A5314, Thermatics 12447, 28883/02060X-1,
RTG 179, Semflex RT316
8
752866314, 7528G6314
8
5M2559-001, 81264-01,
Tensolite 28598/9J063T-1, Teledyne 13809,
Cheminax 9530F5214
8
ST5M1323-001, Champlain 81-00700,
Teledyne 11914/1, Times AA6603,
Tensolite 26895/90334X-1
8
Tyco 7530A5314
8
5M2397-002
10
JN1088WU (75W), JN1088WT (50W)
GSC-03-81497-00 (75W)
12
12
GSC-03-81497-00 (75W)
12
Harbour TRX179, Times Microwave AA-6151
(RT-179), Axon RGX-179, 540-1050-000 (75W)
12
10602 (Twinax)
8
(Termination Instruction Sheet)**
Pin
Socket
21-033198-003
21-033197-003
21-033198-011
21-033197-011
21-033198-004
21-033197-004
21-033198-010
21-033197-010
21-033198-014
21-033197-014
21-033800-001
21-033801-001
21-033909-012
21-033908-012
21-033909-023
21-033908-023
21-033909-033
21-033908-033
21-033909-071
21-033908-071
(L-1254-F)
(L-1254-V)
(L-1254-D)
(L-1254-S)
(L-1256-A)
(L-1256-J)
(L-1256-M)
(L-1256-P)
(L-1256-AA)
21-033724-015
(L-1255-C)
Comments
(L-1254-E)
(L-1254-T)
(L-1254-C)
(L-1254-S)
(L-1256-B)
(L-1256-J)
(L-1256-M)
(L-1256-P)
JN1104 Interface
Replaced by -33 with
improved rear insulator
JN1104 Interface
(L-1256-AA)
(Consult with
Amphenol for
availability)
Special design with triax
mating end and twinax
cable termination
**Termination instructions are packaged with each contact
and can be found on-line at:
www.amphenol-aerospace.com/serviceinstructions.asp
254
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Coax, Twinax & Triax PC Tail Contacts
General Description, Application Data
Amphenol
Aerospace
Amphenol® Printed Circuit Tail Contacts
are currently supplied as follows:
• 8, 12 and 16 Coax
• 8, 10 and 12 Twinax
• 8 Triax (socket only)
PC Tail shielded contacts provide a cost effective packaging
solution for limited space applications where connectors are
attached to printed circuit boards. High reliability is assured
with factory pre-assembled contacts and standardization
termination to the board. PC Tail contacts are available for
MIL-DTL-38999 Series I and III circular connectors and also
for ARINC 404, ARINC 600 and R27 rectangular connectors.
The following pages show the available PC Tail contact part
numbers for 38999 Circular connectors. See page 265 & 266
for information on twinax contacts for ARINC Rectangular
connectors along with compatible cable terminations.
Consult Amphenol Aerospace for further information on the
applicable tooling for these contacts.
38999
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
PC Tail Coax and Twinax Contacts
for Attachment to Printed Circuit Boards
High
Speed
Fiber
Optics
Contacts
Connectors
TYPICAL ELECTRICAL PERFORMANCE
Cables
Size 8, 12 & 16 PC Tail Coax Contacts
EMI Filter
Transient
Contact Resistance:
Center @ 1 Amp, 55 millivolts max. voltage drop @ 25°C
Outer @ 1 Amp, 55 millivolts max. voltage drop @ 25°C
Operating Frequency: 0–500 MHz
Dielectric Withstanding Voltage:
Center to Outer 500 VAC Rms @ Sea Level
Insulation Resistance
1,000 megohms minimum @ 25°C
Matrix|Pyle
83723 III
Pyle
26500
Size 8, PC Tail Twinax Socket Contact
for use in D38999 Connectors
TYPICAL ELECTRICAL PERFORMANCE
Class L
Contact Resistance:
Center @ 1 Amp, 55 millivolts max. voltage drop @ 25°C
Intermediate @ 1 Amp, 55 millivolts max. voltage drop @ 25°C
Outer @ 1 Amp, 55 millivolts max. voltage drop @ 25°C
Operating Frequency: 0–500 MHz
Dielectric Withstanding Voltage:
Center to Intermediate 500 VAC Rms @ Sea Level
Intermediate to Outer 500 VAC Rms @ Sea Level
Insulation Resistance
1,000 megohms minimum @ 25°C
22992
Size 8 PC Tail Triax Contacts
5015
Crimp Rear
Release
Matrix
Contact Resistance:
Center @ 1 Amp, 55 millivolts max. voltage drop @ 25°C
Intermediate @ 1 Amp, 55 millivolts max. voltage drop @ 25°C
Outer @ 1 Amp, 55 millivolts max. voltage drop @ 25°C
Operating Frequency: 0–20 MHz
Dielectric Withstanding Voltage:
Center to Intermediate 500 VAC Rms @ Sea Level
Intermediate to Outer 500 VAC Rms @ Sea Level
Insulation Resistance
1,000 megohms minimum @ 25°C
26482
Size 8, 10 & 12 PC Tail Twinax Contacts
Matrix 2
TYPICAL ELECTRICAL PERFORMANCE
BackShells
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Options
Others
D38999 Connector with PC Tail Coax Contacts,
Sealing Plugs in unused contact cavities and
PC Tail Alignment Disc
255
Amphenol
Aerospace
Coax, Twinax & Triax PC Tail Contacts
Application Data, cont.
38999
III
HD
Dualok
II
I
SJT
PC TAIL COAX, TWINAX, AND TRIAX CONTACTS FOR USE IN D38999 SERIES I & III CONNECTORS
Size
Accessories
Aquacon
Herm/Seal
PCB
PC Tail Coax
Contact Part Number
PC Tail Twinax Contact
Part Number
PC Tail Triax
Contact Part Number
Tails*
8 Pin
21-033733-007
8 Pin
21-033733-002
PCB 2 tails
For epoxy filled connector
8 Pin
21-033733-004
PCB 2 tails
For epoxy filled connector
8 Pin
21-033733-005
PCB 4 outer tails, 1 inner
8 Pin
21-033733-009
PCB 2 tails
8 Pin
21-033733-008
PCB 2 tails
8 Socket
21-033426-001
8 Pin
PCB 2 tails
PCB 2 tails
21-033967-115
PCB 3 tails
8 Pin
21-033967-125
PCB 3 tails
High
Speed
8 Pin
21-033967-015
PCB 3 tails
8 Pin
21-033967-045
PCB 3 tails
Fiber
Optics
8 Pin
21-033967-055
PCB 3 tails
8 Pin
21-033967-065
PCB 3 tails
Contacts
8 Pin
21-033967-085
PCB 3 tails
8 Pin
21-033967-095
PCB 3 tails
8 Pin
P-209550†
PCB 3 tails
8 Pin
P-209532-1
PCB 9 tails
8 Pin
P-209532-2
PCB 9 tails
8 Socket
21-033921-015
PCB 3 tails
8 Socket
21-033921-045
PCB 3 tails
8 Socket
21-033921-035
PCB 3 tails
8 Socket
21-033921-065
PCB 3 tails
8 Socket
21-033921-075
PCB 3 tails
8 Socket
21-033921-115†
PCB 3 tails
8 Socket
21-033479-001
PCB 3 tails
8 Socket
21-033479-021
PCB 3 tails
8 Socket
21-033921-105†
PCB 3 tails
Connectors
5015
8 Socket
DB-109002
PCB 2 tails
8 Socket
21-033919-015
PCB 2 tails
8 Socket
21-033919-025
PCB 2 tails
Matrix|Pyle
256
M39029/90/91 Interface
AS39029/114 Type
(with hood)
AS39029/114 Type
(with hood)
M39029/90/91 Interface
.040 dia. tails
M39029/91 Interface
Outer body grounded to shell
8 Pin
21-033828-001
PCB 3 tails
8 Pin
21-033828-021
PCB 3 tails
8 Pin
21-033828-041
PCB 3 tails
8 Socket
21-033840-001
PCB 3 tails
8 Socket
21-033840-021
PCB 2 tails
Outer body grounded to shell
8 Socket
10 Pin
12 Socket
21-033841-001
PCB 2 tails
PCB 2 tails
Outer body grounded to shell
Outer body grounded to shell
21-033844-002†
* Consult Amphenol Aerospace for tail configurations and tail diameters.
† Consult Amphenol Aerospace for current release of this contact.
Options
Others
BackShells
Class L
22992
Crimp Rear
Release
Matrix
Pyle
26500
83723 III
26482
Matrix 2
EMI Filter
Transient
Cables
Comments
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Coax, Twinax & Triax PC Tail Contacts
Application Data, cont.
Amphenol
Aerospace
PC TAIL COAX, TWINAX, AND TRIAX CONTACTS FOR USE IN D38999 SERIES I & III CONNECTORS
Size
PC Tail Coax
Contact Part
Number
PC Tail Twinax
Contact Part
Number
PC Tail Triax
Contact Part
Number
Tails*
12 Pin
21-033686-008
PCB 2 tails
12 Pin
21-033686-009
PCB 2 tails
12 Pin
21-033686-005
PCB 2 tails
Comments
Outer tail clip type
12 Pin
21-033686-010
PCB 2 tails
12 Pin
21-033686-013
PCB 2 tails
Outer tail clip type
12 Pin
21-033687-006
PCB 2 tails
For epoxy filled connector
12 Pin
21-033687-007
PCB 2 tails
PCB 2 tails
12 Pin
21-033686-016†
12 Socket
21-033614-001
PCB 2 tails
12 Socket
21-033614-021
PCB 2 tails
12 Socket
21-033614-041
PCB 2 tails
12 Socket
21-033611-003
PCB 2 tails
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
High
Speed
Outer tail clip type
12 Socket
21-033440-001
PCB 3 tails
12 Socket
21-033430-001
PCB 2 tails
Outer tail clip type, M38999 Series II
12 Socket
21-033430-021
PCB 2 tails
M38999 Series II
12 Socket
21-033430-041
Fiber
Optics
Contacts
Connectors
Cables
M38999 Series II
21-033633-001†**
PCB 4 tails
12 Pin
21-033633-007**
PCB 4 tails
12 Socket
21-033393-006**
PCB 4 tails
12 Socket
21-033393-005**
PCB 4 tails
12 Socket
21-033433-001**
PCB 4 tails
PCB 90 degree, 2 tails
16 Pin
21-033856-065
PCB 2 tails
16 Pin
21-033634-015
PCB 1 tail
16 Pin
21-033634-035
PCB 1 tail
16 Pin
21-033634-045
PCB 1 tail
16 Pin
21-033386-001
PCB 2 tails
16 Socket
21-033857-001
PCB 2 tails
16 Socket
21-033610-001
PCB 2 tails
16 Socket
21-033610-002
PCB 2 tails
16 Socket
21-033441-001
PCB 2 tails
16 Socket
21-033606-001
PCB 2 tails
21-033606-021†
PCB 2 tails
21-033606-031†
PCB 2 tails
16 Socket
21-033610-003
PCB 2 tails
16 Socket
21-033857-003
PCB 2 tails
M38999 Series II
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Options
Others
* Consult Amphenol Aerospace for tail configurations and tail diameters.
** Size 12 twinax and triax contacts are intermatable.
† Consult Amphenol Aerospace for current release of this contact.
BackShells
16 Socket
16 Socket
Outer body grounded to shell
Class L
PCB 2 tails
PCB 2 tails
22992
21-033857-008
21-033857-007
5015
16 Socket
16 Socket
Outer body grounded to shell
Pyle
PCB 2 tails
26500
21-033856-015
21-033856-025
M38999 Series II, JN1104 Interface
Crimp Rear
Release
Matrix
16 Pin
16 Pin
JN1104 Interface
Matrix|Pyle
PCB 4 tails
83723 III
PCB 4 tails
26482
21-033633-002**
21-033633-006**
Matrix 2
12 Pin
12 Pin
EMI Filter
Transient
12 Pin
38999
257
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
Front face of pin inserts illustrated
A
Connectors
EMI Filter
Transient
Cables
Insert Arrangement
Connector Series
Service Rating
9-5
10-2
TV
SJT
Grounded
Number of Contact
Contact Size
JT
12-4
LJT
JT, SJT
II
13-4
14-4
LJT, TV
JT
15-4
LJT
I
I
2
3
4
4
16
16
16
12
A
Insert Arrangement
Available in
Connector Series
L A
K
M B
C
R N
J
P
H
D
B
C
14-5
G
15-5
JT, SJT LJT, TV
A
G
F
14-15
E
15-15
E
A
L
B
B
C
H
C
E
F
J
B
H
K
M
G
D
F
D
D
C
E
F
14-68
15-68
14-97
15-97
JT
LJT
JT, SJT
LJT, TV
JT, SJT LJT, TV
JT, SJT LJT, TV
I
17-6
Service Rating
II
5
14
1
8
8
4
6
Contact Size
16
20
16
16
20
16
12
K A
G
26482
B
F
Insert Arrangement
16-8
17-8
Service Rating
Y
M
L
E
16-13
17-13
JT, SJT
LJT
UC
D
V
W
K
J
A
B
Z
X
I
1
A
T
S
N
D
F
D
JT, SJT LJT, TV
C
M
N
G
C
E
P
L
H
I
R
B
J
H
Connector Series
I
16-6
Number of Contact
H
17
6
E
F
G
B
D
C
30
11
16-99
17-99
17-2
JT, SJT LJT, TV
LJT
17-22
TV
I
LJT
I
Number of Contact
8
13
21
2
38
1
2
2
Contact Size
16
16
20
16
22D
8
12
8
2
13 14
12
3
11
22 15 16
23
21
17
20
9
8
Service Rating
Contact Size
19
7
4
18
6
S
G
C
L
b
Z
L
E
19-11
LJT
JT, SJT LJT, TV
M
II
J
K
N
X E
M
Y
a
M
D
W
H
F
A
d T
P
C
e
N
D
18-11
c
P
F
V
c
a
L
K
V
g
f
Z
J
H
D
W
X
Y
U
C
A
f
V
B
U
e
b
G
Coax
S
R
B
U
d
R
B
K
5
17-25
Insert Arrangement
Number of Contact
24
H
A
T
A
J
1
M
TV
II
Connector Series
W
C
E
F
S
G
N
K
R
M
19-28
18-30
19-30
19-31
JT
LJT
JT
LJT
TV
I
B
g
h
18-28
I
E
M
22
2
11
26
2
29
1
2
1
12
22D
8
16
20
16
20
16
8
12
22D
The insert arrangements shown on this page and the next page represent
the most readily available patterns within the 38999 Circular Series. If you
require other arrangements than what are shown here, consult Amphenol
for further availability. In most cases, unless otherwise stated, size 8
and size 12 cavities can be filled with either coax, twinax, triax or power
contacts.
CONTACT LEGEND
8
Coax/Twinax/
Triax or Power
258
13-3
1
D
Matrix 2
Matrix|Pyle
83723 III
Pyle
26500
5015
LJT, TV
B
C
8 Twinax
E
Crimp Rear
Release
Matrix
Class L
22992
12-3
A
C
A
10
BackShells
11-2
D
B
D
A
I
A
Options
Others
C
A
B
High
Speed
Contacts
Incorporating Coax, Twinax and Triax Contacts
B
Accessories
Aquacon
Herm/Seal
PCB
Fiber
Optics
Insert Arrangements - MIL-DTL-38999
10
12
Twinax/Triax/ Coax/Twinax/
or Power
Triax or
Power
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
16
20
22D
Coax or
Power
Power
Power
Amphenol
Aerospace
Insert Patterns - MIL-DTL-38999
Incorporating Coax, Twinax and Triax Contacts
Front face of pin inserts illustrated
A
L
K
C
M
T
J
U
R
G
Insert Arrangement
19-68
18-96
LJT
JT
Service Rating
F
D
N
C
R
H
D
E
JT
C
L
P
D
G
20-11
21-11
E
F
E
20-16
JT, SJT LJT, TV
B
S
J
C
F
F
18-68
Connector Series
G
J
G
E
A
M
K
B
K
D
P
S
H
L
H
B
H
N
A
J
A
B
21-16
JT, SJT LJT, TV
I
I
I
II
Number of Contact
18
9
11
16
Contact Size
16
12
12
16
38999
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
High
Speed
Fiber
Optics
T
N
W
V
U
A
X
j
S
i
M
L
c
F
C
B
N
U
D
V
J
L
C
V
K
S
T
U
J
F
F
G
21-75
20-79
21-79
22-21
23-21
SJT
LJT, TV
SJT
LJT
JT, SJT
LJT, TV
M
II
II
37
I
2
4
17
21
Contact Size
20
16
8
22D
16
1
A
M
A
B
N
L
S
K
C
P
D
B
G
J
E
G
J
C
K
R
H
L
F
F
EE
s
V
S
KK
CC
p
R
23-99
24-4
Connector Series
TV
LJT
LJT
JT, SJT
Service Rating
M
II
II
AA
m
H
J
K
L
G
g
h
25-4
LJT, TV
I
9
4
16
11
48
8
16
12
16
16
20
16
10
12
Twinax/Triax/ Coax/Twinax/
or Power
Triax or
Power
Options
Others
8
BackShells
40
22D
CONTACT LEGEND
Coax/Twinax/
Triax or Power
Class L
23-97
M
F
f
22992
23-54
Insert Arrangement
z
k
N
E
e
BB
n
P
D
d
y
JJ
LL
q
C
c
x
HH
DD
r
U
T
D
E
FF
t
W
H
GG
u
X
5015
2
26 3
27 4
45 46
5
28
6
29
53 47
30
49 48 31
7
32
8
33
34
9
10
35 12 11
B
b
Crimp Rear
Release
Matrix
23
22
21 44
20 43 52
42
19
41
51
40
39 50
18
38
37
17
36
16
15
14 13
25
Pyle
24
a
w
v
26500
A
Z
Y
Matrix|Pyle
20-75
83723 III
21-39
LJT, TV
26482
20-39
Number of Contact
Number of Contact
E
H
H
D
JT, SJT
Service Rating
Contact Size
Cables
R
X
G
K
Connectors
B
W
L
E
M
G
H
J
K
P
C
E
b
d
p
A
P
Matrix 2
Connector Series
a
n
D
Contacts
A
M
B
R
D
Z
m
q
f
e
N
Insert Arrangement
r
C
A
T
S
EMI Filter
Transient
g
P
Y
k
h
R
B
16
20
22D
Coax or
Power
Power
Power
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
259
Amphenol
Aerospace
Insert Patterns - MIL-DTL-38999
Incorporating Coax, Twinax and Triax Contacts
38999
III
HD
Dualok
II
I
SJT
M
A
B
A
S
A
B
R
L
N
K
P
U
J
C
V
R
T
D
S
H
3
X
F
1
W
Y
E
M
V
L
Z
a
L
G
W
K
H
24-19
25-19
JT, SJT LJT, TV
Connector Series
Service Rating
High
Speed
24-20
SJT
JT, SJT LJT, TV
I
Number of Contact
19
10
13
3
4
12
12
Contact Size
12
20
16
8
12
16
12
(Locations U and Y - Dedicated to Fiber Optics)
Contacts
Connectors
U
A
Cables
R
S
B
T
EMI Filter
Transient
N
f
a
d
M
e
Z
L
X
Y
26482
Matrix 2
Matrix|Pyle
L
g
P
J
JT, SJT
LJT, TV
r
t
s
N
M
24-43
L
JT, SJT LJT, TV
I
37
23
20
Contact Size
16
16
20
16
Pyle
A
s
T
Y
v
AA
r
Z
a
q
n
z
m
w
y
k
M
Connector Series
H
D
J
C
b E
N
Insert Arrangement
B
C
S p
R
I
A
B
X
u
x
g
h
f
K
L
24-46
SJT
Service Rating
d
e
J
K
25-43
I
W
G
H
e
f
29
t
F
d
R
LJT, TV
x
u
S
G
E
b
h
T
H
JT, SJT
26500
83723 III
K
D
c
v
F
a
b
M
k
C
a
q
w
Y
Z
25-37
Service Rating
Crimp Rear
Release
Matrix
5015
F
m
U
E
p
Number of Contact
P
Class L
N
n
24-37
U
22992
p
c
25-29
V
BackShells
P
24-29
Insert Arrangement
Connector Series
X
m
H
J
k
B
Z
n
V
D
r
G
K
q
d
E
W
W
W
A
Y
X
C
h
R
D
V
B
V
f
e
U
c
g
S
C
b
A
T
P
Options
Others
G
25-24
N
Fiber
Optics
F
c
G
H
G
L
K
D
F
E
J
25-46
25-11*
LJT, TV
LJT, TV
I
N
Number of Contact
40
4
2
2
9
Contact Size
20
16
8
20
10
CONTACT LEGEND
* For use in MIL-STD-1760 applications with MIL-DTL-38999 Series III.
8
Coax/Twinax/
Triax or Power
260
F
H
24-24
LJT, TV
I
E
U
V
J
25-20*
D
T
J
Insert Arrangement
C
S
X
F
2
K
Accessories
Aquacon
Herm/Seal
PCB
U
6
7
R
N
D
T
5
4
Y
N
M
E
G
Z
P
B
P
C
10
12
Twinax/Triax/ Coax/Twinax/
or Power
Triax or
Power
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
16
20
22D
Coax or
Power
Power
Power
MIL-DTL-5015, MIL-DTL-22992 Circular
Connector Overview
Amphenol
Aerospace
38999
Amphenol’s medium to heavy weight circular include the MS/Standard
MIL-DTL-5015 series and the heaviest weight, largest size circular is the Heavy
Duty MIL-DTL-22992 series. These time-tested circulars have been used for
several years. They are dependable general duty and environmentally resistant
connectors for military and industrial applications.
Shielded coax contacts, although more popularly used in 38999 types and 26482
types, can be incorporated into some arrangements of the 5015 and 22992 type
circulars. Shielded coaxial contacts within these series are considered MS
modifications to the MIL-spec connector and the coax contacts are pre-installed
in the connector. Normal operating voltage with power contacts only is up to 3000
VAC (RMS) at sea level for MIL-DTL-5015 circulars. The Heavy Duty types are
designed for high current capacity and have current ratings (with power contacts
only) of up to 200 amps.
Standard and Heavy Duty Circular offer these features for contact
termination flexibility:
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
MS/Standard MIL-DTL-5015 Type Connectors
• Insert arrangements that can incorporate:
• Size 4, 8 & 12 Crimp Coax contacts, pre-installed in the connector
• Wide selection of connector shell styles and sizes
• Standard power contact options within the various connector styles include: solder type,
crimp front release, crimp rear release
• Coax contacts are designed to the same high performance standards as power contacts.
Coax and power contacts may be intermixed with no degradation of connector reliability.
Contacts
Connectors
Cables
Heavy Duty QWLD,
MIL-DTL-22992 Connectors
See MS/Standard catalog 12-020 for complete information on these styles
MS-A, MS-C, MS-E, MS-F, MS-R
QWL
Pyle
26500
• A more compact heavy duty design for industrial power
and control applications
See Catalog 12-053 for complete information on these styles.
Matrix|Pyle
• Designed for most power and control circuits
• Military MIL-DTL-22992 qualified versions & proprietary equivalents
See Catalog 12-052 for complete information on these styles.
83723 III
QWLD
26482
Amphenol® Heavy Duty Circular
MIL-DTL-22992 Connector Family:
Matrix 2
• Produced in strict accordance with MIL-DTL-5015
• Threaded coupling, solder or crimp rear insertion contacts
(coax available in crimp type only)
• Class A, Solid Shell - intended for general connector usage
• Class C, Pressurized - for use on pressurized bulkheads or
pressure barriers
• Class E/F, Environmental Resisting - ideally suited for installation where condensation, vibration and rapid changes in
pressure or temperature are considerations
• Class R, Lightweight Environmental Resisting - shorter in
length and lighter in weight than Class E
Fiber
Optics
EMI Filter
Transient
Amphenol® MS/Standard Circular
MIL-DTL-5015* Type Connector Family:
High
Speed
GENERAL ORDERING INFORMATION
Class L
BackShells
Options
Others
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
22992
* Amphenol also offers the following other MIL-DTL-5015 Circular Connectors which are threaded coupling
(consult Amphenol Industrial for availability of shielded contacts in any of these series):
• Amphenol®/Matrix® MIL-DTL-5015 with crimp rear releasable and rear insertable contacts. (See Matrix 5015 section of this catalog)
• Amphenol® MIL-DTL-5015 Modifications (Ask for Industrial Catalog 12-021)
NOTE:
• Amphenol® GT Series with reverse bayonet coupling (Ask for Catalog 12-024)
MIL-DTL-5015 supersedes MIL-C-5015
• Amphenol® AC Threaded and AC-B Bayonet Series
MIL-DTL-22992 supersedes MIL-C-22992
(Ask for Industrial Catalog 12-025)
5015
Crimp Rear
Release
Matrix
Amphenol MS/Standard MIL-DTL-5015 type and Heavy Duty MIL-DTL-22992 type circulars are normally supplied with a full complement
of power contacts, separately packaged. Coax contacts are ordered by part number as referenced in the part number charts on the
following pages of this catalog, and are substituted for the power contacts at the time of the cable or equipment assembly. Coax contacts
are pre-installed in these series. Installation instructions for the coax contacts for these series are provided in Amphenol document L-650.
HOW TO ORDER:
1. Select the coax contacts designed for the cable being used from the chart on page 409 of this catalog.
Select a connector insert from those shown on page 44 which will accommodate the quantity and size of coaxial contacts needed plus
any power contacts required.
2. Determine the MS/Standard or Heavy Duty Series style desired. (See features of each series referenced above) The catalog
referenced for each series will guide you in determining shell style, finish, service class and insert rotation required for your application.
MS/Standard MIL-DTL-5015 Type Connectors (Catalog 12-020 on-line at www.amphenol-industrial.com)
Catalog 12-052 - MIL-DTL-22992 QWLD Connectors (on-line at www.amphenol-aerospace.com)
Catalog 12-053 - QWL Connectors (on-line at www.amphenol-aerospace.com)
3. Consult Amphenol Aerospace with the pertinent cable, contact, insert arrangement and connector style choices for complete
connector part number.
261
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
Coaxial Contacts for MIL-DTL-5015,
Heavy Duty MIL-DTL-22992 General Description
Amphenol® Coaxial Contacts- Can be incorporated into MS/Standard
MIL-DTL-5015 Type Circular Connectors and Heavy Duty MIL-DTL-22992 Connec
tors. They offer the same durability advantages and design benefits for reliable
interconnection as the Amphenol coax contacts used in high performance D38999
connectors. A variety of military and commercial shielded cables are accommodated
within these circular series.
Other features of the coax contacts available for MS/Standard and Heavy Duty
circulars include:
• Several insert arrangements that can incorporate:
• Size 4, 8 and 12 coax contacts
Accessories
Aquacon
Herm/Seal
PCB
• Advanced shielding wire technology in a rugged military connector
• Single connector with multiple coaxial connection eliminates cross-mating
High
Speed
• Positive contact captivation - especially important in these series with its much
higher coupling/uncoupling force
• Older shielded cable type availability
Fiber
Optics
Contacts
Connectors
Cables
Matrix|Pyle
Coax Contact, Pin
for use in MS/Standard MIL-DTL-5015 and
Heavy Duty MIL-DTL-22992 Connectors
Size 4, 8 & 12 Contacts
Contact Resistance:
Center @ 1 Amp, 170 millivolts max. voltage drop @ 25°C
Outer @ 12 Amps, 150 millivolts max. voltage drop @ 25°C
Dielectric Withstanding Voltage:
Size 4 & 8: 1,300 VAC Rms @ sea level
Size 12: 1,000 VAC Rms @ sea level
Size 4, 8 & 12: 250 VAC Rms @ 50,000 ft.
Insulation Resistance
5,000 megohms minimum @ 25°C
All contacts in these series are non-impedance matched contacts.
Part numbers 21-033063-XX( ) and 21-033064-XX( ) are moisture
seal design (internal O-ring).
Pyle
26500
83723 III
26482
Matrix 2
EMI Filter
Transient
TYPICAL ELECTRICAL PERFORMANCE
CONTACT FINISHES:
5015
Coax Contact, Socket
for use in MS/Standard MIL-DTL-5015 and
Heavy Duty MIL-DTL-22992 Connectors
1
2
3
4
5
E
F
H
0.00020 min. silver over copper flash
0.00005 min. gold (Knoop hardness 130-200) over silver
0.00010 min. gold (Knoop hardness 130-200) over silver
0.00010 min. gold (Knoop hardness 130-200) over copper
0.00005 min. gold (Knoop hardness 130-200) over nickel
0.00005 min. gold (Knoop hardness 90 max.) over copper
0.00005 min. gold (Knoop hardness 130-200) over copper
0.00010 min. gold (Knoop hardness 130-200) over copper
Options
Others
BackShells
Class L
22992
Crimp Rear
Release
Matrix
Suffix Finish
262
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Amphenol
Aerospace
Coaxial Contacts for MIL-DTL-5015,
Heavy Duty MIL-DTL-22992 Application Data
L
F
H MATING
38999
PIN DIA
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
G
SOCKET
L
H
F
G MATING
PIN
PIN DIA
NOTE: All contacts of the same size and the same inner and outer contact diameters (G & H) will mate with each other.
COAX CONTACTS
For use in MS/Standard MIL-DTL-5015 Type and Heavy Duty MIL-DTL-22992 Type Connectors
Contact Part Number
Cable
Finish
on
Mating
Size
Parts
(See
Pg. 42)
(See L-650 Termination
Instruction Sheet for all
contacts listed below)**
Pin
Socket
Dimensional Data
(See Drawings above)
G
Dia.
H
Dia.
±
0.001
F
Across
Flats
±0.004
Crimp Ferrule Tools
L
Length Ref.
Pin
Socket
MIL-T-22910/7-1
Tool Use with Die
Part Number
MIL-T-22520/5-01
Tool Use with Die
Part Number
MIL-T-229520/10-01
Tool Use with Die
Part Number
Retainer
Nut
Wrench
8
8
8
8
8
5
1
††
3
***
0.0355
± 0.0010
0.218
0.280
1.481
1.511
21-033013-005
21-033014-005
21-033015-002
21-033016-002
21-033034-005 21-033033-005†
21-033130-005( ) 21-033129-005( )
21-033064-021( ) 21-033063-021( )
8
8
8
8
8
5
3
1
***
***
0.0355
± 0.0010
0.218
0.280
1.481
1.511
21-033060-010( ) 21-033059-010( )
4
***
0.0400
± 0.0010
0.344
0.375
21-033013-003
21-033014-003
21-033015-001
21-033016-001
21-033033-003
21-033034-003
RG-161/U,
RG-174A/U, 21-033130-003( )† 21-033129-003( )†
RG-179B/U, 21-033064-020( )† 21-033063-020( )†
8
8
8
8
8
5
3
1
***
***
0.0355
± 0.0010
0.218
0.280
21-033013-021
21-033014-021
21-033033-001
21-033034-001
21-033047-001
21-033048-001
21-033130-001( )† 21-033129-001( )†
12
12
12
12
5
1
***
***
0.0200
± 0.0005
0.128
0.172
21-033013-022†
12
5
0.0200
± 0.0005
0.128
0.172
1.481
1.511
M22910/7-11 (B)
M22520/5-03 (B)
M22520/5-33 (B)
M22520/10-05 (B)
11-8676-1
RG-180B/U,
RG-195A/U
21-033013-006
21-033014-006
21-033034-006† 21-033033-006†
21-033047-003
21-033048-003
21-033130-006( )† 21-033129-006( )
8
8
8
8
5
1
***
***
0.355
± 0.0010
0.218
0.280
1.481
1.511
M22910/7-15 (B)
M22520/5-05 (B)
M22520/5-41 (B)
M22520/10-07 (B)
11-8676-2
RG-212/U
21-033060-011( ) 21-033059-011( )
4
***
0.0625
± 0.0010
0.344
0.375
1.669
1.605
M22910/7-14 (A)
M22520/5-39 (A)
RG-140/U,
RG-302/U
21-033013-008
21-033014-008
21-033033-008
21-033034-008
21-033130-008( )† 21-033129-008( )†
8
8
8
5
1
***
0.0355
± 0.0010
0.218
0.280
1.481
1.511
M22910/7-17 (B)
M22520/5-05 (A)
M22520/5-19 (B)
M22520/10-07 (A)
21-033013-004
21-033014-004
21-033033-004
21-033034-004
21-033130-004( ) 21-033129-004( )
8
8
8
5
1
***
0.0355
± 0.0010
0.218
0.280
1.481
1.511
M22910/7-17 (B)
M22520/10-07 (A)
21-033060-102( ) 21-033059-012( )
4
***
0.0625
± 0.0010
M22520/5-05 (A)
M22520/5-19 (B)
0.344
11-8676-3
11-8676-4
1.511
M22910/7-12 (B)
M22520/5-03 (A)
M22520/5-08 (A)
M22520/5-35 (B)
M22520/10-05 (A)
Class L
22992
11-8676-4
5015
11-8676-2
11-8676-2
BackShells
1.605
Pyle
1.669
26500
11-8676-1
Matrix|Pyle
1.605
83723 III
11-8676-4
† Consult Amphenol Aerospace for current availability of this contact.
CRIMPING TOOLS: Italicized letters in parenthesis that follow
positioner part numbers indicate applicable die closure. Commercial
equivalents with the same die closure dimension may be used.
†† 21-033047-X and 21-033048-X are supplied with E (soft gold)
finish on mating socket parts, and F (hard gold) finish on mating pin
parts.**Termination instruction sheet L-650 can be found on-line at:
www.amphenol-aerospace.com/serviceinstructions.asp
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Options
Others
***See finish options for MS/Standard and Heavy Duty contacts listed on page 262.
Replace the parenthesis of the contact part number with the finish suffix number. However,
you should consult Amphenol Aerospace regarding the availability of all finish choices for
each part number.
Cables
11-8676-2
1.481
0.375
M22520/5-45 (B)
11-8676-2
26482
RG-55B/U,
RG-142A/U,
RG-142B/U,
RG-223/U
21-033014-022†
M22910/7-18 (B)
Connectors
M22520/10-07 (B)
Crimp Rear
Release
Matrix
RG-178B/U,
RG-196A/U
M22520/5-05 (B)
M22520/5-41 (B)
Matrix 2
RG-187A/U,
RG-188A/U,
RG-316/U
1.669
M22910/7-15 (B)
EMI Filter
Transient
RG-59B/U,
RG-62A/U,
RG-62B/U,
RG-210/U
Fiber
Optics
Contacts
21-033013-001
21-033014-001
21-033033-002
21-033034-002
21-033047-002
21-033048-002
21-033015-005
21-033016-005
21-033130-002( ) 21-033129-002( )
RG-58C/U,
RG-141A/U,
RG-303/U
High
Speed
263
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
Insert Arrangements - Standard
MIL-DTL-5015, Heavy Duty MIL-DTL-22992
Incorporating Coax Contacts
Front face of pin inserts illustrated
C
A
B
Accessories
Aquacon
Herm/Seal
PCB
C
B
D
A
C
B
18-10
18-16
20-4
MS/Standard, QWLD, QWL
MS/Standard, QWLD, QWL
MS/Standard, QWLD, QWL
MS/Standard, QWLD, QWL
A
A
C
D
Service Rating
High
Speed
A
16-10
Insert Arrangement
Connector Series
D
Number of Contact
3
4
1
4
Contact Size
12
12
12
12
Fiber
Optics
Contacts
F
F
Connectors
Cables
EMI Filter
Transient
E
26482
Matrix 2
Matrix|Pyle
G
B
D
D
C
G
F
I
H
C
G
B
A
A
E
D
B
E
D
C
G
20-16
24-2
24-11
MS/Standard, QWLD, QWL
MS/Standard, QWLD, QWL
MS/Standard, QWLD, QWL
MS/Standard, QWLD, QWL
Service Rating
A
A
D
Number of Contact
7
2
7
7
3
6
Contact Size
12
12
16
12
8
12
Connector Series
A
M
Pyle
26500
A
U
N
E
P
F
K
V
5015
C
B
Y
M
W
e
D
T
J
P
a
H
B
F
K
R
b
I
A
E
O
V
d
C
X
I
Z
G
L
D
N
U
c
A
B
S
Crimp Rear
Release
Matrix
Class L
22992
H
J
R
BackShells
I
20-15
W
Options
Others
F
H
T
264
C
A
B
Insert Arrangement
83723 III
E
A
S
X
C
G
L
28-6
28-11
32-8
MS/Standard, QWLD, QWL
MS/Standard, QWLD, QWL
MS/Standard, QWLD, QWL
Service Rating
D
A
A
Number of Contact
3
4
18
6
24
Contact Size
4
12
16
12
16
Insert Arrangement
Connector Series
The insert arrangements shown on this page represent the most readily available patterns within
the MIL-DTL-5015 and MIL-DTL-22992 Series. If you require other arrangements than what are
shown here, consult Amphenol for further availability. MS/Standard connectors have over 200 insert
pattern arrangements available, and within these patterns any size 4, 8 or 12 contact cavities can be
incorporated with coax contacts. However, you need to consult Amphenol, Sidney NY for availability
and ordering information. All coax contacts in the Standard and Heavy Duty series come pre-installed
in connectors.
CONTACT LEGEND
4
8
12
16
Coax or Power
Coax/
Twinax/Triax
or Power
Coax/Twinax/
Triax or
Power
Coax or
Power
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Rectangular Rack & Panel Connectors
That Incorporate High Speed Contacts
Amphenol
Aerospace
38999
Amphenol provides an impressive array of Rectangular
Interconnection products to meet the needs of high
density systems such as opto-electrical backplanes used
in many applications that include: medical equipment,
IC chip testers, telecommunications, military and
commercial aviation, military ground vehicles,
GPS systems, space and industrial applications.
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
ARINC 600 and R27 Rack and Panel connectors can
incorporate:
• Size 8 Coax contacts
• Size 1 and size 5 Coax (consult Amphenol Canada)
• Size 12 Twinax contacts
• Size 8 Quadrax contacts
• Size 8 Differential Twinax contacts
ARINC 600 Rack and Panel Rectangular Connectors
ARINC 600 Rack and Panel Connectors
are high density connectors that can
incorporate high speed shielded contacts
Fiber
Optics
Contacts
Connectors
Cables
EMI Filter
Transient
Matrix|Pyle
83723 III
Pyle
26500
R27 Series Rack and Panel Connector
can incorporate high speed shielded contacts
5015
Crimp Rear
Release
Matrix
Class L
22992
See Amphenol Canada Publication for R27 Series Connectors for
complete information.
• The R27 Series is a robust rectangular connector designed to
meet or surpass all the requirements of the MIL-DTL-83527
specification and EN 3682 European Standard.
• Well suited for harsh environments - enhanced environmental
sealing, robust and durable shells, EMI shielding spring
• Filtered or non-filtered
• Connectors, shells, inserts, termination modules and contacts are
sold separately or fully assembled
• Interchangeable insert patterns with ARINC 600 models
• Contact options: standard contacts are power/signal crimp rear
release in sizes 12, 16, 20 and 22 in crimp or PCB; or shielded
coax, concentric twinax, quadrax contacts; or fiber optics
26482
R27 Rack and Panel Rectangular Connectors
Matrix 2
See Amphenol Canada Publication SL-379, ARINC 600 Rack and
Panel Connectors for complete information.
• The ARINC 600 is the successor to the ARINC 404 for many of
the new avionics designs and offers lower mating force contacts,
increased contact count and a front release, floating keying
system
• ARINC 600 Connectors are a recognized standard rack and
panel connector for aircraft applications with both environmental
and non-environmental versions available
• Designed to meet all relevant ARINC 600 connector specifications
• Front removable keying posts
• Up to 800 size 22 contact positions in one connector
• Contact options: standard contacts are power/signal crimp rear
release in sizes 12, 16, 20 and 22 in crimp or PCB; or shielded
coax, concentric twinax, quadrax contacts; or fiber optics
• Waveguide connections
High
Speed
BackShells
Options
Others
Coax Contact , Size 8 for use in ARINC
Rack and Panel Connectors
Quadrax Contact , Size 8 for use in ARINC
Rack and Panel Connectors
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
265
Amphenol
Aerospace
38999
III
HD
Dualok
II
I
SJT
Application Data
ARINC 600 & R27 Rack and Panel Connectors
QUADRAX CONTACTS
FOR USE IN ARINC 600 & R27 CONNECTORS
Contact Part Number
(Termination Instruction Sheet)**
Cable
Tensolite NF24Q100-01,
24443/9P025X-4(LD),
S280W502-4, 24443/03130X-4(LD),
PIC E51424
Accessories
Aquacon
Herm/Seal
PCB
Socket
21-033382-021
21-033383-021
100
21-033382-031
21-033383-031
100
21-033382-101
21-033383-101
100
21-033382-071
21-033383-071
110
21-033382-061
21-033383-061
150
(L-2119-I)
Draka Fileca F-4704-5, NF22Q100
(L-2119-AS)†
JSFY02-1
†
Tensolite 26473/02006X-4(LD),
Gore RCN8328
Impedance
(Ohms)
Pin
(L-2119-AH)
Draka Fileca F-4703-3
High
Speed
Fiber
Optics
High Speed Contacts for Rack & Panel
(L-2119-L)
(L-2119-AH)
(L-2119-I)
(L-2119-AS)†
†
(L-2119-L)
EMI Filter
Transient
Contact Part Number
Socket
ABS0386WF24
21-033378-021
21-033379-021
100
ASNE0272TK22
21-033378-031
21-033379-031
100
ASNE0272TK24
21-033378-041
21-033379-041
100
Tensolite 24463/9P025X-2(LD)
21-033378-051
21-033379-051
100
GC875TM24H
21-033378-061
21-033379-061
77
21-033378-071
21-033379-071
110
26482
Matrix 2
Matrix|Pyle
83723 III
Impedance
(Ohms)
Pin
(L-2119-G)
(L-2119-G)
(L-2119-G)
†
(L-2119-AU)
†
Pyle
26500
5015
Crimp Rear
Release
Matrix
Class L
22992
(Termination Instruction Sheet)**
Cable
(L-2119-G)
(L-2119-G)
M22520/2-01
with Positioner Daniels K709
(M22520/2-37)
M22520/5-01
with Die Set M22520/5-45
(Location B)
M22520/2-01
with Positioner Daniels K709
(M22520/2-37)
M22520/5-01
with Die Set M22520/5-45
(Location A)
(L-2119-G)
†
(L-2119-AU)
†
Contact Part Number
Cable
(Termination Instruction Sheet)**
Pin
RG-179,
RG316
RG-179,
RG316
BackShells
Socket
Contact
Size
21-033676-001 21-033675-001
(L-2090-B)
(L-2090-A)
21-033476-001 21-033475-001
Crimping Tools
Inner
Outer
Contact
Contact
M22520/10-01
M22520/2-01
with Die Set
with Positioner
M22520/10-05 (A)
K1275
8
Inner
Contact
Outer Contact
M22520/2-01
with Positioner Daniels K709
(M22520/2-37)
M22520/5-01
with Die Set M22520/5-45
(Location A & B)
PCB QUADRAX CONTACTS
FOR USE IN ARINC 600 & R27 CONNECTORS
PCB
Quadrax
Contacts
Contact Part Number
Pin
PCB (.346
Length)
PCB (.473
Length)
Socket
Impedance
(Ohms)
Contact
Size
100
8
21-033397-171
21-033398-261
21-033676-002 21-033675-002
†
†
TWINAX CONTACTS
FOR USE IN ARINC 600 & R27 CONNECTORS
Contact Part Number
Cable
Crimping Tools
Contact
Size
8
COAX CONTACTS
FOR USE IN ARINC 600 & R27 CONNECTORS
5M2869-001
Options
Others
Outer Contact
DIFFERENTIAL TWINAX CONTACTS
FOR USE IN ARINC 600 & R27 CONNECTORS
Cables
(Termination Instruction Sheet)**
Pin
Socket
EPD 32263,
21-033631-004† 21-033632-003
10612,
(L-2092-U)†
(L-2092-J)
GSC-12-2548-00
266
Inner
Contact
8
Contacts
Connectors
Crimping Tools
Contact
Size
Contact
Size
12
Crimping Tools
† Consult Amphenol Aerospace for current release of this contact or
instruction sheet if applicable.
Daniels crimping tools are available from Daniels Mfg. Corp. 6103 Anno
Ave., Orlando, FL 32809
**Termination instructions are packaged with each contact and can be
found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp
Inner
Outer
Contact
Contact
GS200-1
MH992
with Positioner with Positioner
GP959
K1365
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Amphenol
Aerospace
Guide for Selecting High Frequency
Contacts and Cables
Date_______________________________________________
The following check list is provided to help you specify a high
frequency contact and cable system, and it will help our design
team to meet your requirements. You may copy this page and fax it
to Amphenol Aerospace 607-563-5157, attention Contact Design.
Or call 607-563-5011 or 800-678-0141 for assistance.
Amphenol
Salesperson________________________________________
CONNECTOR INFORMATION
Connector Family: TV-R c LJT-R c JT-R c
CUSTOMER INFORMATION
Other ________________________________________
Customer Company Name___________________________________________
Insert Arrangement Desired____________________________
Engineer Name____________________________________________________
Shell Style__________________________________________
Program_________________________________________________________
Shell Plating________________________________________
38999
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
High
Speed
Forecast__________________________________________________________
CONTACT INFORMATION
CABLE INFORMATION
Type: Coaxial c Concentric Twinax c Triax c
Cable Part Number*___________________________________________
Cable Manufacturer ___________________________________________
Coaxial c
Triax c
Differential Twinax* c Quadrax* c
Contact Impedance Matched? Yes c
Quadrax c
Cable Impedance____________________________________
75W c 100W c 150W c
No c
Other_______
Braid Type_____________________________
O.D. of First Jacket_________________________
Jacket Material_________________________
O.D. of Second Braid_______________________
Braid Type_____________________________
O.D. of Second Jacket______________________
Jacket Material_________________________
(flat, round, wrap)
(flat, round, wrap)
Braid AWG ______________________
Braid AWG______________________
Class L
PERFORMANCE INFORMATION
22992
It is essential that a 3 foot sample of the cable be supplied for performance and crimp tool development.
5015
O.D. of First Braid__________________________
Pyle
Material of Inner Insulation _______________
26500
O.D. of Inner Insulation_____________________
Matrix|Pyle
Material of Inner Wires ___________________
Crimp Rear
Release
Matrix
No. of Inner Wire Strands___________________
83723 III
O.D. of Inner Wire_________________________ AWG of Inner Wires______________________
26482
* Quadrax and Differential Twinax currently available in
size 8 only.
Matrix 2
* if not an RG-Number complete below information:
50W c
Connectors
Cables
Size*: 8 c 12 c 16 c
Twinax c
Contacts
EMI Filter
Transient
Cable Type:
Fiber
Optics
Electrical Protocol _________________________________________________________________________________________________
Cross Talk___________________________ db
Operating Frequency______________________ Attenuation____________________________
Current Outer Contact______________
VAC (RMS)
Amp
Application Temperature___________________
Insertion Loss___________________
_________________DC
Options
Others
Operating Voltage ____________________
BackShells
VSWR Requirement 1. to 1.__________________
Current Inner Contacts_________________ Amp
Environmental Requirement__________________________________________
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
267
工商网监
湘ICP备2023018690号
