U99-B104-200T

CFP2 Series Connector Product Specification S6081C Rev 1.0 About Amphenol Commercial Products Amphenol’s commercial connector products are used in a variety of end user applications including networking, telecom, server & computer, storage & HDD, consumer electronics and entertainment, professional audio & Industrial & Military/Aerospace. Related Products QSFP+ U99-B104-XXXX 104 POSITION CFP2 SERIES CONNECTOR 38 POSITION CONNECTOR Overview This short form Product Specification defines the general use and performance parameters for Amphenol’s CFP2 series connector. THRU THE BEZEL CAGE ASSEMBLY WITH HEAT SINK The interconnect system comprises a 104 position 0.6 mm pitch connector designed to be compatible with the 100G Form factor Pluggable (CFP) Multi-source Agreement. Availability: In Production Usage 1x3 BEHIND THE BEZEL CAGE ASSEMBLY WITH HEAT SINK AND LIGHT PIPES The connector system is capable of data rates up to 10 Gbps per channel (up to 10 channels) or 25 Gbps per channel (up to 8 channels) with resonance dampening for improved signal integrity (104 position connector). Applications CXP CAGE AND CONNECTOR ASSEMBLY WITH ROUND PIN HEAT SINK AND ELASTOMER GASKET Revision Date: May 4, 2011 Intended for use in high speed serial interconnect applications such as:  Clusters  Servers  Storage devices General Requirements Connectors are tape and reel packaged for robotic pick-and-place. Page 1 of 2 S6081C Rev 1.0 About Amphenol Commercial Products Amphenol’s commercial connector products are used in a variety of end user applications including networking, telecom, server & computer, storage & HDD, consumer electronics and entertainment, professional audio & Industrial & Military/Aerospace. Related Products QSFP+ 38 POSITION CONNECTOR Connector Electrical Characteristics Operating Voltage: 3.3V Operating Current: 1.875A Connector Mechanical Characteristics Insertion Force: 80 N Withdrawal Force: 50 N Durability: 200 mating cycles Material Requirements Unless otherwise specified, the materials for each component shall be:  Contacts o Base material – Phosphor Bronze o Contact Normal Force – 40g nominal o Formed edge o Plating  Mating area – 30 microinches (0.76 µm) µin min Gold over 50 µin (1.27 µm) min Nickel  Solder tails – 100 microinches (2.54 µm) µin min Tin, over 50 µin (1.27 µm) min Nickel  Housings: Black color, glass-reinforced, lead-free solder reflow process compatible thermoplastic, UL94V-0 rated  Resonance dampening feature: Conductive polymer. Temperature rise: Meets the requirement of 30° C ΔT Operating and storage temperature: -40° to +85° C THRU THE BEZEL CAGE ASSEMBLY WITH HEAT SINK Process Characteristics Connectors are tape and reel packaged Cages offered in various options (refer to S6066C) Maximum process temperature during soldering is 260°C for 10 seconds Belly-to-belly placement possible, allowing for two cages to mount on opposite sides of PCB Resonance Dampening Features 1x3 BEHIND THE BEZEL CAGE ASSEMBLY WITH HEAT SINK AND LIGHT PIPES This connector incorporates a ground commoning device to provide better common mode performance and reduced crosstalk at resonance frequencies. CXP Available Documents Drawing Numbers: P-U99-B104-XXXX CFP2 Series Connector Contact factory or Authorized Amphenol representative for alternate configurations CAGE AND CONNECTOR ASSEMBLY WITH ROUND PIN HEAT SINK AND ELASTOMER GASKET Amphenol Canada Corp. 605 Milner Avenue Toronto, Ontario, Canada, M1B 5X6 +1 416 291 4401 Page 2 of 2 Copyright © Amphenol Corporation 2013 • All rights reserved www.amphenolcanada.com THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP.