WM-00AU03-09-B1

Magnetic Connector Series Magnetic Connector Series This series offers low profile, compact, sealed connectors that withstand exposure to rain, dust, dirt and chemicals. Stingray connectors are intended for First Responders, Security and Military personnel. Stingray features a magnetic, non-keyed mating system which allows the connector to be easily mated without the need for pre-alignment and eliminates the need to operate any coupling mechanisms. Stingray has been optimised for USB 2.0 & Ethernet protocols, and is an excellent solution for audio, power or data signals. 2 The low profile Stingray connector sits flat against the body to prevent snagging & damage. It is self-aligning due to the strong magnetic connection, and allows customisation and flexibility of cable routing as the cable can be rotated through 360o when the connector is mated. Features Benefits Magnetic mating mechanism Aids blind-mate performance and prevents inadvertent damage if the user forgets to unmate Non-keyed rotatable mating Does not require pre-alignment when mating. Cable exit angle is infinitely variable and can be set and adjusted by the user Wipe clean interface featuring sprung-loaded contacts Easy cleaning and decontamination 5000+ mating cycles Increased connector life before replacement Compatible with USB 2.0, Ethernet and Audio signal requirements Allows interconnection of various equipment including computers, radios and headsets Last mate contact Allows hot-swapping of equipment and signals (i.e. interface is passive until the connector is fully mated) 90° Cable exit within the height of the connector Cable runs parallel to the body eliminating loops and preventing snagging IP68 sealed High degree of sealing prevents ingress of dust and moisture STINGRAY SERIES Stingray features and terminology Sprung contacts Interfacial seal Flexible overmould Non-keyed, rotatable interface ‘Last-mate, first-break’ contact 22 mm Views of the mated pair Stingray performance information Test parameter Description Electrical Current rating 3A per contact continuous, 5A per contact peak Data rate USB 2.0 compliant Insulation resistance 5000 MΩ at 500 VDC Contact resistance