ZB-AANMAN-BN0001

1 2 3 4 5 ECN NO. A F B C220320 6 7 8 DATE SIGN DESCRIPTION 2021/10/09 Xiaofeng New Initial 2022/03/02 Xiaofeng B X60 (L Dimensions refer to table ) # 0.25 QC L B Code THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. IT IS CONFIDENTIAL AND A REV. 1.00 E This feature less than L(36.3mm) does not exist 6.7 (Ref.) 3.1 Detail: A C Laser Etching Corresponding Pin Number Detail: A ZB- XX NMAN-BN0001 XX:Number Of Contacts（Pitch） AA:40(P0.9)/20(P1.8) AB:38(P0.9)/19(P1.8) AC:36(P0.9)/18(P1.8)/12(P2.7) AD:34(P0.9)/17(P1.8) AE:32(P0.9)/16(P1.8 AF:30(P0.9)/15(P1.8)/10(P2.7) AG:28(P0.9)/14(P1.8) AH:26(P0.9)/13(P1.8) AI:24(P0.9)/12(P1.8)/8(P2.7) AJ:22(P0.9)/11(P1.8) B TOLERANCE .X # 0.25 .XX # 0.1 .XXX # 0.05 ANGLES # 1 1 Amphenol LTW Z CONN., N SHLD, B, NONE, M SCALE REV. $ 2 1:1 B SIZE SHEET A4 WC-REV. .0 1 OF 11 Xiaofeng DWG NO ZB-XXNMAN-BN0001 CUSTOMER Feng-Li 5 6 Jerry 7 2021/10/09 DATE APPROVED BY ALTW 4 2021/10/09 DATE CHECKED BY QC :Inspection item 3 DATE DRAWN BY ITEM NO 2021/10/09 8 WI0814-03-表單01A2 Amphenol LTW. A TITLE UNIT:mm Note: QC * Important Dimensions To Check. * Material:Thermoplastic, Black. * FFC Recommended Pitch： 1.0mm,1.5mm,2.0mm. * WTB Recommended Applicable Wire gauge 22AWG ~ 26AWG * All Parts Are RoHS Compliant. PROPERTY OF Amphenol LTW. DISCLOSURE TO THIRD PARTY HAS TO BE AUTHORIZED BY 18.0 D 1 2 3 4 5 6 7 8 A A QC C 0.60 Pin "n-1" Pin 2 QC C #0.05 A A B 0.180 0.35 Pin "n" 0.60 #0.05 B Reinforcing Plate D 3.00 2.25 Pin 1 #0.07 A 2* 1.85 2* 3.80 2* 0.70 FPC A B 0.180 #0.05 #0.05 A B A 0.75 Detail B Pin "n-1" 0.90 D QC 0.80 QC QC Pin 1 QC 1.80 17.4 B 14.8 6.00 4.20 B 2.20 Pin 2 E Pin "n" 3.00 2.25 2* 1.85 2* 3.80 A C 2.20 1.80 2* 0.70 B #0.07 4.20 0.80 6.00 QC B 14.8 C #0.05 B B F #0.05 A D 0.60 Gold finger above flat surface B C Detail: B RECOMMENDED FPC LAYOUT RECOMMENDED FPC LAYOUT B L(mm) A(mm) B(mm) C(mm) D(mm) PIN L(mm) A(mm) B(mm) C(mm) D(mm) 24 27.3 19.8 9.45 10.35 25.3 22 25.5 18.0 9.45 8.55 23.5 28 30.9 23.4 11.25 12.15 28.9 26 29.1 21.6 11.25 10.35 27.1 32 34.5 27.0 13.05 13.95 32.5 30 32.7 25.2 13.05 12.15 30.7 36 38.1 30.6 14.85 15.75 36.1 34 36.3 28.8 14.85 13.95 34.3 40 41.7 34.2 16.65 17.55 39.7 38 39.9 32.4 16.65 15.75 37.9 TITLE UNIT:mm TOLERANCE .X # 0.25 .XX # 0.1 .XXX # 0.05 ANGLES # 1 1 Amphenol LTW Z CONN., N SHLD, B, NONE, M SCALE REV. $ 2 1:1 B SIZE SHEET A4 WC-REV. .0 2 OF 11 DRAWN BY DWG NO CHECKED BY Xiaofeng ZB-XXNMAN-BN0001 CUSTOMER Feng-Li ALTW 4 5 6 2021/10/09 DATE Jerry 7 2021/10/09 DATE APPROVED BY QC :Inspection item 3 DATE ITEM NO 2021/10/09 8 WI0814-03-表單01A2 Amphenol LTW. A PIN PROPERTY OF Amphenol LTW. DISCLOSURE TO THIRD PARTY HAS TO BE AUTHORIZED BY Recommend Optional THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. IT IS CONFIDENTIAL AND A Flexible Printed Circuit Pitch 0.9mm 1 2 3 4 5 6 7 8 #0.07 A 2* 0.70 QC B 0.180 C 0.60 B A 0.35 FPC #0.05 Recommend Optional Pin "n" 1.80 #0.05 17.4 Pin 1 0.75 Detail C QC 6.00 B 14.8 E QC 3.00 2.20 B 2.25 B Gold finger above flat surface #0.05 A 0.60 0.80 #0.05 QC 2* 1.85 2* 3.80 F Detail: C Reinforcing Plate A D D RECOMMENDED FPC LAYOUT B 1 B(mm) C(mm) D(mm) 11 25.5 18.0 9.45 8.55 23.5 12 27.3 19.8 9.45 10.35 25.3 13 29.1 21.6 11.25 10.35 27.1 14 30.9 23.4 11.25 12.15 28.9 15 32.7 25.2 13.05 12.15 30.7 16 34.5 27.0 13.05 13.95 32.5 17 36.3 28.8 14.85 13.95 34.3 18 38.1 30.6 14.85 15.75 36.1 19 39.9 32.4 16.65 15.75 37.9 20 41.7 34.2 16.65 17.55 TITLE UNIT:mm TOLERANCE .X # 0.25 .XX # 0.1 .XXX # 0.05 ANGLES # 1 A(mm) Amphenol LTW Z CONN., N SHLD, B, NONE, M SCALE REV. $ 2 1:1 B SIZE SHEET A4 WC-REV. .0 3 OF 11 39.7 Xiaofeng DWG NO ZB-XXNMAN-BN000 1 CUSTOMER Feng-Li 5 6 Jerry 7 2021/10/09 DATE APPROVED BY ALTW 4 2021/10/09 DATE CHECKED BY QC :Inspection item 3 DATE DRAWN BY ITEM NO 2021/10/09 8 WI0814-03-表單01A2 Amphenol LTW. A L(mm) PROPERTY OF Amphenol LTW. DISCLOSURE TO THIRD PARTY HAS TO BE AUTHORIZED BY C PIN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. IT IS CONFIDENTIAL AND A Flexible Printed Circuit Pitch 1.8mm 1 2 3 4 5 6 7 8 A 0.60 QC D 2* 0.70 Detail D B 2.25 Pin "n-1" QC FPC #0.05 Pin 1 #0.05 #0.07 A Pin 2 Pin "n" QC 0.60 2.70 #0.05 #0.05 A 5.40 A B A 0.75 0.80 3.00 QC Pin "n-1" 5.40 C QC 17.4 4.20 2.70 Pin 1 D B Pin "n" E 4.20 B 2.25 2.20 B 14.8 6.00 E #0.07 A B Pin 2 2* 0.70 0.80 6.00 QC B 14.8 D 2* 1.85 2* 3.80 #0.05 QC 3.00 E 2* 1.85 2* 3.80 A 2.20 F 0.180 A C Reinforcing Plate B 0.180 B A A F #0.05 Recommend Optional 0.60 B Gold finger above flat surface C Detail: D RECOMMENDED FPC LAYOUT RECOMMENDED FPC LAYOUT B L(mm) F(mm) A(mm) B(mm) C(mm) D(mm) E(mm） 8 27.3 25.3 16.2 7.65 8.55 10.35 5.85 PIN L(mm) 12 38.1 36.1 27.0 13.05 13.95 15.75 11.25 10 32.7 TITLE UNIT:mm TOLERANCE .X # 0.25 .XX # 0.1 .XXX # 0.05 ANGLES # 1 1 Amphenol LTW Z CONN., N SHLD, B, NONE, M SCALE REV. $ 2 1:1 B SIZE SHEET A4 WC-REV. .0 4 OF 11 F(mm) A(mm) B(mm) C(mm) 30.7 21.6 13.05 8.55 DRAWN BY DWG NO CHECKED BY ZB-XXNMAN-BN0001 11.25 6 2021/10/09 DATE Feng-Li Jerry 7 2021/10/09 DATE APPROVED BY ALTW 5 10.35 Xiaofeng CUSTOMER 4 E(mm) DATE ITEM NO QC :Inspection item 3 D(mm) 2021/10/09 8 WI0814-03-表單01A2 Amphenol LTW. A PIN PROPERTY OF Amphenol LTW. DISCLOSURE TO THIRD PARTY HAS TO BE AUTHORIZED BY F 0.35 B THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. IT IS CONFIDENTIAL AND A Flexible Printed Circuit Pitch 2.7mm 1 2 3 4 5 6 7 8 A Detail E B Pin "n-1" Pin 2 B #0.05 #0.07 A QC QC PCB 2.25 Pin 1 QC C 0.80 B #0.05 2.20 0.80 Pin "n-1" 0.60 #0.05 A Pin 1 0.90 D 2* 0.70 QC 4.20 6.00 B 14.8 B 2.20 Pin 2 E Pin "n" QC 4.20 2.25 C 1.80 6.00 1.80 2* 0.70 B #0.07 A B 14.8 0.80 #0.05 QC 3.00 C 2* 1.85 2* 3.80 B 3.00 A 2* 1.85 2* 3.80 A1 F QC C 0.180 Pin "n" 0.60 #0.05 A B B 0.180 A A The welding point A FFC D 0.35 #0.05 Recommend Optional RECOMMENDED FFC LAYOUT 0.50 C B Gold finger above flat surface RECOMMENDED FFC LAYOUT Detail: E B L(mm) A(mm) B(mm) C(mm) D(mm) PIN L(mm) A(mm) B(mm) C(mm) D(mm) 24 27.3 19.8 9.45 10.35 25.3 22 25.5 18.0 9.45 8.55 23.5 28 30.9 23.4 11.25 12.15 28.9 26 29.1 21.6 11.25 10.35 27.1 32 34.5 27.0 13.05 13.95 32.5 30 32.7 25.2 13.05 12.15 30.7 36 38.1 30.6 14.85 15.75 36.1 34 36.3 28.8 14.85 13.95 34.3 40 41.7 34.2 16.65 17.55 39.7 38 39.9 32.4 16.65 15.75 37.9 TITLE UNIT:mm TOLERANCE .X # 0.25 .XX # 0.1 .XXX # 0.05 ANGLES # 1 1 Amphenol LTW Z CONN., N SHLD, B, NONE, M SCALE REV. $ 2 1:1 B SIZE SHEET A4 WC-REV. .0 5 OF 11 DRAWN BY DWG NO CHECKED BY Xiaofeng ZB-XXNMAN-BN000 1 CUSTOMER Feng-Li ALTW 4 5 6 2021/10/09 DATE Jerry 7 2021/10/09 DATE APPROVED BY QC :Inspection item 3 DATE ITEM NO 2021/10/09 8 WI0814-03-表單01A2 Amphenol LTW. A PIN PROPERTY OF Amphenol LTW. DISCLOSURE TO THIRD PARTY HAS TO BE AUTHORIZED BY D A THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. IT IS CONFIDENTIAL AND A Flexible Flat Cables Pitch 0.9mm 4 0.80 2* 0.70 QC 6.00 B 14.8 E Pin "n" 0.60 QC 1.80 C 0.180 B QC 3.00 2.20 B 2.25 Pin 1 7 PCB 0.80 #0.05 Detail F 0.35 #0.05 A B Gold finger above flat surface A #0.05 Recommend Optional B D 8 #0.07 A F 6 0.50 QC 5 #0.05 3 2* 1.85 2* 3.80 2 Detail: F The welding point A FFC D RECOMMENDED FFC LAYOUT L(mm) A(mm) B(mm) C(mm) D(mm) 11 25.5 18.0 9.45 8.55 23.5 12 27.3 19.8 9.45 10.35 25.3 13 29.1 21.6 11.25 10.35 27.1 14 30.9 23.4 11.25 12.15 28.9 15 32.7 25.2 13.05 12.15 30.7 16 34.5 27.0 13.05 13.95 32.5 17 36.3 28.8 14.85 13.95 34.3 18 38.1 30.6 14.85 15.75 36.1 19 39.9 32.4 16.65 15.75 37.9 20 41.7 34.2 16.65 17.55 C B UNIT:mm TOLERANCE .X # 0.25 .XX # 0.1 .XXX # 0.05 ANGLES # 1 1 Amphenol LTW Z CONN., N SHLD, B, NONE, M SCALE REV. $ 2 1:1 B SIZE SHEET A4 WC-REV. .0 6 OF 11 39.7 Xiaofeng DWG NO ZA-XXNMAN-BN0001 CUSTOMER Feng-Li 5 6 Jerry 7 2021/10/09 DATE APPROVED BY ALTW 4 2021/10/09 DATE CHECKED BY QC :Inspection item 3 DATE DRAWN BY ITEM NO 2021/10/09 8 WI0814-03-表單01A2 Amphenol LTW. A TITLE PROPERTY OF Amphenol LTW. DISCLOSURE TO THIRD PARTY HAS TO BE AUTHORIZED BY PIN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. IT IS CONFIDENTIAL AND A 1 Flexible Flat Cables Pitch 1.8mm 1 2 3 4 5 6 7 8 A 2.20 4.20 B Pin "n" Pin "n-1" QC 0.60 2.70 5.40 C D Pin 1 QC PCB Pin 1 B QC 0.180 0.80 #0.05 #0.07 A B 2.25 2* 0.70 0.80 Pin "n-1" Detail J #0.05 #0.05 2.25 D 3.00 B E B 14.8 B 14.8 6.00 E #0.07 A QC Pin 2 2* 0.70 0.80 B QC 2.20 D 4.20 E 2* 1.85 2* 3.80 A 6.00 A1 2* 1.85 2* 3.80 #0.05 QC 3.00 F Pin 2 2.70 QC A Pin "n" 0.60 #0.05 A 5.40 B A B A 0.180 C B The welding point A FFC 0.35 C A F #0.05 Recommend Optional 0.50 B Gold finger above flat surface Detail: J RECOMMENDED FFC LAYOUT RECOMMENDED FFC LAYOUT B L(mm) F(mm) A(mm) B(mm) C(mm) D(mm) E(mm） 8 27.3 25.3 16.2 7.65 8.55 10.35 5.85 PIN L(mm) 12 38.1 36.1 27.0 13.05 13.95 15.75 11.25 10 32.7 TITLE UNIT:mm TOLERANCE .X # 0.25 .XX # 0.1 .XXX # 0.05 ANGLES # 1 1 Amphenol LTW Z CONN., N SHLD, B, NONE, M SCALE REV. $ 2 1:1 B SIZE SHEET A4 WC-REV. .0 7 OF 11 F(mm) A(mm) B(mm) C(mm) 30.7 21.6 13.05 8.55 DRAWN BY DWG NO CHECKED BY ZA-XXNMAN-BN0001 11.25 6 2021/10/09 DATE Feng-Li Jerry 7 2021/10/09 DATE APPROVED BY ALTW 5 10.35 Xiaofeng CUSTOMER 4 E(mm) DATE ITEM NO QC :Inspection item 3 D(mm) 2021/10/09 8 WI0814-03-表單01A2 Amphenol LTW. A PIN PROPERTY OF Amphenol LTW. DISCLOSURE TO THIRD PARTY HAS TO BE AUTHORIZED BY F THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. IT IS CONFIDENTIAL AND A Flexible Flat Cables Pitch 2.7mm 1 2 3 4 5 6 7 8 A A Pin "n-1" #0.05 QC 0.60 A 0.90 C B 0.180 D Detail H PCB Pin "n-1" Pin 2 QC B C A A B D #0.05 3.00 2.25 2* 1.85 2* 3.80 2* 0.70 Pin 1 #0.05 #0.07 A QC 6.00 4.20 B 14.8 Pin 1 0.80 0.80 B QC QC B 2.20 Pin 2 E Pin "n" QC 1.80 2.20 2.25 C 4.20 1.80 2* 0.70 B #0.07 A 6.00 0.80 B 14.8 QC #0.05 C 3.00 B 2* 3.80 A1 2* 1.85 F Pin "n" 0.60 #0.05 A B A 0.180 A D Wire 0.35 C RECOMMENDED WTB LAYOUT B Gold finger above flat surface Detail: H PIN L(mm) A(mm) B(mm) C(mm) D(mm) PIN L(mm) A(mm) B(mm) C(mm) D(mm) 24 27.3 19.8 9.45 10.35 25.3 22 25.5 18.0 9.45 8.55 23.5 28 30.9 23.4 11.25 12.15 28.9 26 29.1 21.6 11.25 10.35 27.1 32 34.5 27.0 13.05 13.95 32.5 30 32.7 25.2 13.05 12.15 30.7 36 38.1 30.6 14.85 15.75 36.1 34 36.3 28.8 14.85 13.95 34.3 40 41.7 34.2 16.65 17.55 39.7 38 39.9 32.4 16.65 15.75 37.9 TITLE UNIT:mm TOLERANCE .X # 0.25 .XX # 0.1 .XXX # 0.05 ANGLES # 1 1 Amphenol LTW Z CONN., N SHLD, B, NONE, M SCALE REV. $ 2 1:1 B SIZE SHEET A4 WC-REV. .0 8 OF 11 DRAWN BY DWG NO CHECKED BY Xiaofeng ZA-XXNMAN-BN0001 CUSTOMER Feng-Li ALTW 4 5 6 2021/01/15 DATE Jerry 7 2021/01/15 DATE APPROVED BY QC :Inspection item 3 DATE ITEM NO 2021/01/15 8 WI0814-03-表單01A2 Amphenol LTW. A 0.50 RECOMMENDED WTB LAYOUT B #0.05 Recommend Optional PROPERTY OF Amphenol LTW. DISCLOSURE TO THIRD PARTY HAS TO BE AUTHORIZED BY The welding point THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. IT IS CONFIDENTIAL AND A Wire to Board Pitch 0.9mm 3 QC 0.80 5 A 2.25 QC QC QC 1.80 C B 0.180 8 0.80 #0.05 3.00 2.20 6.00 B 14.8 Pin "n" 0.60 Pin 1 E 7 Detail I PCB #0.05 A 0.35 #0.05 Recommend Optional B A B Gold finger above flat surface A D 0.50 2* 0.70 B F 6 Detail: I The welding point D Wire C PIN L(mm) A(mm) B(mm) C(mm) D(mm) 11 25.5 18.0 9.45 8.55 23.5 12 27.3 19.8 9.45 10.35 25.3 13 29.1 21.6 11.25 10.35 27.1 14 30.9 23.4 11.25 12.15 28.9 15 32.7 25.2 13.05 12.15 30.7 16 34.5 27.0 13.05 13.95 32.5 17 36.3 28.8 14.85 13.95 34.3 18 38.1 30.6 14.85 15.75 36.1 19 39.9 32.4 16.65 15.75 37.9 20 41.7 34.2 16.65 17.55 B UNIT:mm TOLERANCE .X # 0.25 .XX # 0.1 .XXX # 0.05 ANGLES # 1 1 Amphenol LTW Z CONN., N SHLD, B, NONE, M SCALE REV. $ 2 1:1 B SIZE SHEET A4 WC-REV. .0 9 OF 11 39.7 Xiaofeng DWG NO ZA-XXNMAN-BN0001 CUSTOMER Feng-Li 5 6 Jerry 7 2021/10/09 DATE APPROVED BY ALTW 4 2021/10/09 DATE CHECKED BY QC :Inspection item 3 DATE DRAWN BY ITEM NO 2021/10/09 8 WI0814-03-表單01A2 Amphenol LTW. A TITLE PROPERTY OF Amphenol LTW. DISCLOSURE TO THIRD PARTY HAS TO BE AUTHORIZED BY RECOMMENDED WTB LAYOUT THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. IT IS CONFIDENTIAL AND A Wire to Board Pitch 1.8mm 4 #0.07 #0.05 2 2* 1.85 2* 3.80 1 2 3 4 D E QC Pin 1 QC 5.40 0.60 Pin "n-1" QC 0.60 2.70 #0.05 A 5.40 B C A #0.05 QC Pin 1 #0.05 A C Pin "n" 6.00 Pin "n-1" 2.70 B 0.180 B 14.8 Detail G PCB 2.25 3.00 #0.05 A 2* 3.80 0.80 #0.07 B B 3.00 QC 0.80 2* 1.85 #0.05 Pin 2 2* 0.70 QC B 2.20 Pin "n" 4.20 6.00 2.25 2* 1.85 2* 3.80 B 2* 0.70 D #0.07 A Pin 2 8 2.20 0.80 4.20 E B 14.8 7 A QC D 6 A F E 5 0.180 B A A F B A F Wire C 0.35 #0.05 RECOMMENDED WTB LAYOUT B Gold finger above flat surface 0.50 Recommend Optional RECOMMENDED WTB LAYOUT Detail: G B L(mm) F(mm) A(mm) B(mm) C(mm) D(mm) E(mm） 8 27.3 25.3 16.2 7.65 8.55 10.35 5.85 PIN L(mm) 12 38.1 36.1 27.0 13.05 13.95 15.75 11.25 10 32.7 TITLE UNIT:mm TOLERANCE .X # 0.25 .XX # 0.1 .XXX # 0.05 ANGLES # 1 1 Amphenol LTW Z CONN., N SHLD, B, NONE, M SCALE REV. $ 2 1:1 B SIZE SHEET A4 WC-REV. .0 10 OF 11 F(mm) A(mm) B(mm) C(mm) 30.7 21.6 13.05 8.55 DRAWN BY DWG NO CHECKED BY ZA-XXNMAN-BN0001 11.25 6 2021/10/09 DATE Feng Li Jerry 7 2021/10/09 DATE APPROVED BY ALTW 5 10.35 Xiaofeng CUSTOMER 4 E(mm) DATE ITEM NO QC :Inspection item 3 D(mm) 2021/10/09 8 WI0814-03-表單01A2 Amphenol LTW. A PIN PROPERTY OF Amphenol LTW. DISCLOSURE TO THIRD PARTY HAS TO BE AUTHORIZED BY The welding point THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. IT IS CONFIDENTIAL AND A 1 Wire to Board Pitch 2.7mm 1 2 3 4 5 6 7 8 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. IT IS CONFIDENTIAL AND A Packing: F Vacuum-Cover Lower Cover ( 360.00 ) E D Am ph en ol LT W R UP C (3 90 50 ) (3 ) 60 PCS/Tray B Note: QC * Important Dimensions To Check. * Material: PET,0.6mm,CR TOLERANCE .X # 0.25 .XX # 0.1 .XXX # 0.05 ANGLES # 1 1 Amphenol LTW Z CONN., N SHLD, B, NONE, M SCALE REV. $ 2 1:1 B SIZE SHEET A4 WC-REV. .0 11 OF 11 Xiaofeng DWG NO ZB-XXNMAN-BN0001 CUSTOMER Feng Li 5 6 Jerry 7 2021/10/09 DATE APPROVED BY ALTW 4 2021/10/09 DATE CHECKED BY QC :Inspection item 3 DATE DRAWN BY ITEM NO 2021/10/09 8 WI0814-03-表單01A2 Amphenol LTW. A TITLE UNIT:mm PROPERTY OF Amphenol LTW. DISCLOSURE TO THIRD PARTY HAS TO BE AUTHORIZED BY ( 340.00 ) ( 270 ) 20 Tray/BOX