AP130
300mA Low Dropout (LDO) Linear Regulator Features
- Input voltage range is up to 7V - Dropout voltage 400mV at 300mA output current - Guaranteed 300mA output current. - Internal RON =1.5Ω PMOS draws no base current - Low quiescent current 50µA - Output voltage 2% accuracy, 1.5V to 5V with 0.1V step - Fast transient response - Good load regulation - Current limit and thermal shutdown protection - 3 leads SOT89, TO92 and SOT23 packages
General Descriptions
The AP130 is a 300mA, fixed output voltage, low dropout linear regulator. The Device includes pass element, error amplifier, band-gap, current-limit and thermal shutdown circuitry. The characteristics of low dropout voltage and less quiescent current make it good for some critical current application, for example, some battery powered devices. The typical quiescent current is approximately 50µA from zero to maximum load. Due to internal flexible design, result in extensively fixed output voltage versions and make it convenient to use for applications. Built-in current-limit and thermal-shutdown functions prevent any fault condition from IC damage.
Applications
- Wireless Communication - Battery Powered device - CD-ROM, DVD, and LAN Card - PC peripheral
Ordering Information
AP130 XX XX X X
Output voltage
15 : 1.5V ~ ~ 25 : 2.5V 50 : 5.0V ~ ~
Package
Y : SOT89 YR : SOT89R W: SOT23 R: SOT23R Z : TO92 ZR : TO92R
Lead Free
Blank : Normal L : Lead Free Package
Packing
Blank:Tube A : Taping
Block Diagram
IN Error Amp
OUT
Current Limit
-+
Thermal Shutdown
Bandgap
1.08V GND
This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sale of the product.
Rev. 1.0 May 7, 2004 1/9
AP130
300mA Low Dropout (LDO) Linear Regulator Pin Assignments and Pin Descriptions
Package Type ( Top View )
3
Code
No. 1
Name IN OUT GND GND OUT IN OUT GND IN GND
Description
w
1 2
2 3 1
( SOT23) ( Top View )
3
R
1 2
2 3 1
(SOT23R) ( Top View )
Y
1 2 3
2 3 1
(SOT89) ( Top View ) YR
1 2 3
IN: Power Input OUT: Output Voltage GND: Ground
2 3 1
IN OUT IN GND OUT GND IN OUT
(SOT89R) (Top View)
Z
1 2 3
2 3 1
(TO92) (Top View) ZR
1 2 3
2 3
(TO92R)
Anachip Corp. www.anachip.com.tw 2/9
Rev. 1.0 May 7, 2004
AP130
300mA Low Dropout (LDO) Linear Regulator Absolute Maximum Ratings
Symbol VCC TOP TST Input voltage Operating junction temperature range Storage temperature range Power dissipation, PD @TA=25ºC TO-92 SOT-89 SOT-23 Package thermal resistance TO-92 SOT-89 SOT-23 Parameter Rating -0.1 to +7 -40 to +125 -65 to +150 +0.6 +0.5 +0.25 +100 +100 +250 Unit V ºC ºC W W W ºC/W ºC/W ºC/W
PD
θJA
Electrical Characteristics
TA=25ºC, CIN=1µF, COUT=10µF, unless otherwise specified.
Symbol VDROP ILIMIT ∆VLINE PSRR ∆VLOAD ∆VOUT ISB
Parameter Dropout voltage (Note 1) Current Limit (Note 2) Line regulation Ripple Rejection Load regulation (Note 3) Output voltage accuracy Output voltage temperature coefficient (Note 4) Standby current
Conditions IL=300mA VIN=5V,VOUT=0V IL=1mA, VIN=5~7V F=100Hz, CIN=1μF, CO=10uF, IL=100mA IL=1~300mA, VIN=5V IL=1mA, VIN=5V
Min. -350 ----2 --
Typ. 400 450 0.1 58 30 -50 50
Max. 500 -0.3 -40 +2 150 100
Unit mV mA % dB mV % PPM/ºC μA
IL=0, VIN=5V
--
Note 1. Dropout voltage is defined as the input to output differential voltage. Dropout is measured at constant junction temperature by using pulsed ON time, and the criterion is VOUT inside target value ±2%. This test is skipped at the condition of VIN
很抱歉,暂时无法提供与“AP13015ZRLA”相匹配的价格&库存,您可以联系我们找货
免费人工找货