AP1304E-SPLA

AP1301/2/4/5 Single Coil Fan Motor Full Wave Driver Features - Compatible to a Hall element - Operating voltage (VCC) : 4V to 20V - Lock shutdown and automatic restart - Speed indication output (FG) named as AP1301/4 - Rotation detection output (RD) named as AP1302/5 - Output current(AP1301/2) IO=500mA(max) - Output current(AP1304/5) IO=350mA(max) - Operating temperature (Topr) : -30ºC to +85ºC - SOP-8L/ SOP-8L EP package - Include Thermal Shutdown circuit General Description The AP1304/5 is single phase full wave drive design, which is suited for small fans (such as CPU cooling fans). The low switching noise and effective motor drive are another advantage. All functions, including lock shutdown, automatic restart, rotation detection (RD), and speed indication output (FG) have been incorporated into one chip. When the motor is under lock condition, lock shutdown function turns off the output current. When the lock condition is removed, the IC automatically restarts and allows DC fan to run. In addition, the RD function is to detect the motor status and the FG is to provide the rotation speed. The AP1301/2 are heat sink version of AP1304/5. From function wise, AP1301 is the same as AP1304, and AP1302 is the same as AP1305. Application - CPU cooling fans Pin Assignment ( Top view ) ININ+ CT OUT1 1 2 AP1301/2/4/5 3 4 SOP-8L 6 5 OUT2 GND 8 7 RD/FG VCC Pin Descriptions Name VCC IN+ RD/FG INGND CT OUT2 OUT1 Description Power input Hall input Rotation detection / Speed indication Hall input Ground Timing capacitor Driver output Driver output Ordering Information AP130X X - X X X Function - RD output (1305) without heat sink - FG output (1304) - RD output (1302) with heat sink - FG output (1301) Wafer Body Blank or A~Z : if necessary to specify Package Lead Packing Blank : Tube A : Taping Blank: Normal S: SOP-8L SP: SOP-8L EP L: Lead Free This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sale of the product. Rev. 0.2 Apr. 16, 2004 1/5 AP1301/2/4/5 Single Coil Fan Motor Full Wave Driver Block Diagram VCC 7 Reg. Driver1 Driver 2 4 6 OUT1 OUT2 IN+ 2 + Hall amp Control Logic 3 CT RD/ FG 8 Lock Detection Automatic Restart 5 GND IN- 1 Application Circuit D1 input C1 R1 VCC OUT1 Hall element IN+ OUT2 R2 V1 L1 AP1301/2/4/5 INCT C2 RD(FG) GND R6 RD(FG) output Anachip Corp. www.anachip.com.tw 2/5 Rev 0.2 Apr.16, 2004 AP1301/2/4/5 Single Coil Fan Motor Full Wave Driver Absolute Maximum Ratings Parameter Input voltage Output current Maximum output withstand voltage RD/FG maximum output withstand voltage RD/FG maximum output current Allowable power dissipation Operating temperature Storage temperature *note1 : Reduced by 5.5mW for each increase in Ta of 1ºC over 25 ºC (TA=25ºC) Symbol VCC AP1304/5 AP1301/2 Vout Vr/Vf Ir/If AP1304/5 AP1301/2 TOPR TSTG Rating 20 350 500 20 20 5 550*(note1) 1000 -30 to +85 -55 to +150 Unit V mA V V mA mW ºC ºC IOUT PD Electrical Characteristics ( T =25ºC, V A CC =5V, unless otherwise noted) Parameter Power supply voltage Hall input voltage (DC+AC) Supply current Charge current Discharge current Charge/discharge ratio Output Low Level Voltage Output High Level Voltage Hall input sensitivity RD/FG pin output low RD/FG output pin leakage current Symbol Vcc VBH ICC ICHG IDHG RCD Vol Voh VHN Conditions Min. 4 0.2 -1.9 0.32 5.0 3.9 Rating Typ. Max. --6.5 2.8 0.46 6.0 0.2 4.1 7 15 0.3 30 20 VCC-1.5 10 3.7 0.60 7.0 0.3 Unit V V mA uA uA -V V mV V uA Includes the amplitude of signal The output is off VCT = 1.5V VCT = 1.5V IGHG/IDCHG Io=200mA Io=200mA Zero peak value (including offset and hysteresis) VRDL, Vfgl IRD , Ifg = 5mA Irdl,Ifgl Vrd,Vfg=15V -- 0.1 Truth Table INH L - IN+ L H - CT L L H OUT1 H L off OUT2 L H off RD L L off FG L H - Mode Rotating Rotating Lockup protection activated Latch-type RD output is low during rotation and high during stop Anachip Corp. www.anachip.com.tw 3/5 Rev 0.2 Apr.16, 2004 AP1301/2/4/5 Single Coil Fan Motor Full Wave Driver Performance Characteristics (without heat sink AP1304/5) Ta (°C) 25 50 60 70 80 85 90 95 100 138 105 110 110 83 115 55 120 28 Pd (mW) 550 413 358 303 248 220 193 165 Pd (m W ) 600 500 400 300 200 100 0 0 25 P ower D issipation Curve 50 75 85 100 125 150 T a (。 C ) Note：SOP-8L package. Performance Characteristics (with heat sink AP1301/2) Ta (°C) 25 50 60 70 80 85 90 95 100 400 105 360 110 320 115 280 120 240 Pd (mW) 1000 800 720 640 560 520 480 440 Pd (m W ) 1000 900 800 700 600 500 400 300 200 100 0 P ower Dissipation Curve 25 50 75 85 100 125 150 Ta ( 。 C) Note：SOP-8L EP package. Anachip Corp. www.anachip.com.tw 4/5 Rev 0.2 Apr.16, 2004 AP1301/2/4/5 Single Coil Fan Motor Full Wave Driver Marking Information 8 (Top View) 7 6 5 Logo Part Number AC AP1301/2/4/5 YY WW X X Blank : normal L : Lead Free Package Date code X: internal code WW: Xth week,01-52 Y: Year, "01"=2001 "02"=2002 4 1 2 3 SOP-8L Package Information Package Type: SOP-8L ( Normal / Expose Pad ) X Expose Pad H Y E VIEW "A" D 7 (4X) A2 A 0.015x45 A1 e B y C VIEW "A" Dimensions In Millimeters Min. Nom. Max. A 1.40 1.60 1.75 A1 0.10 0.25 A2 1.30 1.45 1.50 B 0.33 0.41 0.51 C 0.19 0.20 0.25 D 4.80 5.05 5.30 E 3.70 3.90 4.10 e 1.27 H 5.79 5.99 6.20 L 0.38 0.71 1.27 y 0.10 0O 8O θ (Expose pad) X 2.92 Y 2.34 Symbol Anachip Corp. www.anachip.com.tw 5/5 Dimensions In Inches Min. Nom. Max. 0.055 0.063 0.069 0.040 0.100 0.051 0.057 0.059 0.013 0.016 0.020 0.0075 0.008 0.010 0.189 0.199 0.209 0.146 0.154 0.161 0.050 0.228 0.236 0.244 0.015 0.028 0.050 0.004 0O 8O 0.115 0.092 - ~ L 7 (4X) Rev 0.2 Apr.16, 2004