AP393NA

AP393 Low Power Low Offset Voltage Dual Comparators Features - Wide supply Voltage range: 2.0V to 36V Single or dual supplies: ±1.0V to ±18V - Very low supply current drain (0.4 mA) – independent of supply voltage - Low input biasing current: 25 nA - Low input offset current: ±5 nA - Maximum offset voltage: ±3 mV - Input common-mode voltage range includes ground - Differential input voltage range equal to the power supply voltage - Low output saturation voltage: 250 mV at 4 mA - Output voltage compatible with TTL, DTL, ECL, MOS and CMOS logic systems - 8-pin PDIP and SOP Pb-Free packages General Description The AP393 consists of two independent precision voltage comparators with an offset voltage specification as low as 2.0 mV max for two comparators which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. These comparators also have a unique characteristic in that the input common-mode voltage range includes ground, even though operated from a single power supply voltage. Application areas include limit comparators, simple analog to digital converters; pulse, squarewave and time delay generators; wide range VCO; MOS clock timers; multivibrators and high voltage digital logic gates. The AP393 is designed to directly interface with TTL and CMOS. When operated from both plus and minus power supplies, the AP393 will directly interface with MOS logic where their low power drain is a distinct advantage over standard comparators. Advantages - High precision comparators - Reduced VOS drift over temperature - Eliminates need for dual supplies - Allows sensing near ground - Compatible with all forms of logic - Power drain suitable for battery operation Pin Assignment (Top View) OUTPUT 1 1 INVERTING INPUT 1 2 NON-INVERTING INPUT 1 3 GND 4 8 AP393 7 6 5 V+ OUTPUT 2 INVERTING INPUT 2 NON-INVERTING INPUT 2 SOP-8L/PDIP-8L Pin Descriptions Pin Name OUTPUT 1 INVERTING INPUT 1 NON-INVERT ING INPUT 1 GND Pin No. 1 2 3 4 Description Channel 1 Output Channel 1 Negative Input Channel 1 Positive Input Ground Pin Name NON-INVERT ING INPUT 2 INVERTING INPUT 2 OUTPUT 2 + V Pin No. 5 6 7 8 Description Channel 2 Positive Input Channel 2 Negative Input Channel 2 Output Vcc This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sale of the product. Rev. 1.0 Sep 7, 2004 1/13 AP393 Low Power Low Offset Voltage Dual Comparators Ordering Information AP393 X X Package N: PDIP-8L S: SOP-8L Packing Blank: Tube A : Taping Block Diagram OUTPUT 1 1 8 V+ INVERTING INPUT 1 2 A B ++ - 7 OUTPUT 2 NON-INVERTING INPUT 1 3 - 6 INVERTING INPUT 2 GND 4 5 NON-INVERTING INPUT 2 V+ 3.5µA 100µA 3.5µA 100µA Q2 +INPUT Q1 Q3 Q4 Q5 OUTPUT -INPUT Q6 Q8 Q7 This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sale of the product. Rev. 1.0 Sep 7, 2004 2/13 AP393 Low Power Low Offset Voltage Dual Comparators Absolute Maximum Ratings (Note 10) Symbol VCC VIN VIN ICC PD TOP TST TLead Parameter Supply Voltage Differential Input Voltage (Note 8) Input Voltage Input Current (VIN-0.3V) (Note 3) Molded DIP Power Dissipation (Note 1) Metal Can Small Outline Package Output Short-Circuit to Ground (Note 2) Operating Temperature Range Storage Temperature Range Lead Temperature Range (Soldering, 10 sec) PDIP Soldering (10 sec) Soldering Information Vapor Phase (60 sec) SOP Infrared (15 sec) ESD rating (1.5kΩ in with 100pF) Rating 36 36 -0.3 to +36 50 780 660 510 Continuous 0 to +70 -65 to +150 +260 +260 +215 +220 1300 Unit V V V mA mW o o C C o C o C V Electrical Characteristics (VCC=5V, TA=25oC, unless otherwise stated) Symbol Parameter VOFFSET Input Offset Voltage IBIAS IOFFSET ICC Input Bias Current Conditions (Note 9) Min. 0 50 6.0 - Typ. 1.0 25 5.0 0.4 1 200 300 1.3 16 250 0.1 Max. 5.0 250 50 V+ -1.5 1 2.5 400 - Unit mV nA nA V mA V/mV ns µs mA mV nA IO(Sink) VSAT IO(Leak) IIN(+) or IIN(-) with Output In Linear Range, VCM=0V (Note 5) Input Offset Current IIN(+) - IIN(-) VCM=0V Input Common Mode Voltage Range V+ =30V (Note 6) V+ =5V Supply Current RL=∞ V+ =36V + RL > 15kΩ, V =15V Voltage Gain VO=1V to 11V VIN=TTL Logic Swing, Large Signal Response Time VREF=1.4V, VRL=5V, RL=5.1kΩ Response Time VRL=5V, RL=5.1kΩ (Note 7) Output Sink Current VIN(-)=1V, VIN(+)=0, VO 0V (or V-, if Differential Input Voltage Used), (Note 8) Min. 0 - Typ. - Max. 9 150 400 V -2.0 700 1.0 36 + Unit mV nA nA V mV µA V Anachip Corp. www.anachip.com.tw 3/13 Rev. 1.0 Sep 7, 2004 AP393 Low Power Low Offset Voltage Dual Comparators Note 1: For operating at high temperatures, the AP393 must be derated based on a 125°C maximum junction temperature and a thermal resistance of 170°C/W which applies for the device soldered in a printed circuit board, operating in a still air ambient. The AP393 must be derated based on a 150°C maximum junction temperature. The low bias dissipation and the “ON-OFF” characteristic of the outputs keeps the chip dissipation very small (PD