ACA2404S7P2

ACA2404 750/870 MHz CATV High Output Power Doubler Line Amplifier ADVANCED PRODUCT INFORMATION - Rev 0.0 FEATURES • • • • • • • • • 21.5 dB Gain Characterized at +58 dBmV Output Very Low Distortion Excellent 75 Ω Input and Output Match Stable with High VSWR Load Conditions Monolithic Design for Consistent Performance Part-to-Part Surface Mount Package Compatible with Automatic Assembly Low Cost Alternative to Hybrids Meets Cenelec Standards APPLICATIONS • CATV Line Amplifiers, System Amplifiers, Distribution Nodes S7 Package 16 Pin Wide Body SOIC with Heat Slug PRODUCT DESCRIPTION The ACA2404 is a highly linear, high output power, monolithic GaAs RF amplifier that has been developed to replace standard CATV hybrid amplifiers, in new designs. Offered in a convenient surface mount package, the MMIC consists of two pairs of parallel amplifiers that are optimized for exceptionally low distortion and noise figure. A hybrid equivalent that provides flat gain response and excellent input and output return loss over the 40 to 870 MHz CATV downstream band is formed when one ACA2404 is cascaded between two appropriate transmission line baluns. 1A RF Input 2A RF Output 1B 2B ACA2404 Figure 1: Hybrid Application Diagram 05/2003 ACA2404 1 2 3 4 5 6 7 8 GND 2A IN GND 1A IN 1B IN I SET 2B IN GND Figure 2: Pin Out GND 1A OUT Bias 1A 2A OUT 2B OUT Bias 1B 1B OUT GND 16 15 14 13 12 11 10 9 Table 1: Pin Description PIN 1 2 3 4 5 6 7 8 NAME GND 2AIN GND 1AIN 1BIN ISET 2BIN GND DESCRIPTION Ground Amplifier 2A Input Ground Amplifier 1A Input Amplifier 1B Input Current Adjust Amplifier 2B Input Ground PIN 9 10 11 12 13 14 15 16 NAME GND 1BOUT B i as 1B 2BOUT 2AOUT B i as 1A 1AOUT GND DESCRIPTION Ground Amplifier 1B Output Bias for 1B Amplifier Amplifier 2B Output and Supply Amplifier 2A Output and Supply Bias for 1A Amplifier Amplifier 1A Output Ground 2 ADVANCED PRODUCT INFORMATION - Rev 0.0 05/2003 ACA2404 ELECTRICAL CHARACTERISTICS Table 2: Absolute Mimimum and Maximum Ratings PARAMETER Supply (pins 12, 13) Current Adjust (pin 6) RF Power at Inputs (pins 4, 5) Storage Temperature Soldering Temperature Soldering Time MIN 0 0 -65 - MAX +28 +4 +75 +150 +260 5.0 UNIT VD C VD C dBmV °C °C S ec Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Notes: 1. Pins 2, 4, 5 and 7 should be AC-coupled. No external DC bias should be applied. 2. Pins 11 and 14 are bias feeds for input amplifiers 1A and 1B. No external DC bias should be applied. 3. Pins 10 and 15 receive DC bias directly from pins 11 and 14. No other external bias should be applied. Table 3: Operating Ranges PARAMETER Supply: VDD (pins 12, 13) Current Adjust (pin 6) RF Frequency Case Temperature MIN 40 -40 TYP +24 +3 - MAX 870 +110 UNIT VD C VD C MHz °C The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. ADVANCED PRODUCT INFORMATION - Rev 0.0 05/2003 3 ACA2404 Table 4: AC and DC Electrical Specifications (TA = +25 °C, VDD = +24 VDC) PARAMETER Gain at 870 MHz (1) Cable Equivalent Slope Gain Flatness Noise Figure (1) (1) MIN 20.8 18 485 - TYP 21.5 0 ± 0.2 4.0 -75 -67 -69 -64 -62 -60 22 500 2.7 MAX 22.1 5.0 -70 -67 -60 515 3.3 UNIT dB dB dB dB COMMENTS to 870 MHz (1) CTB (1) 77 Channels (2) 110 Channels (3) CSO (1) 77 Channels (2) 110 Channels (3) XMOD (1) 77 Channels (2) 110 Channels (3) Return Loss (Input/Output) (1) Supply Current Thermal Resistance dB c dB c dB c dB mA °C/W 75 Ω system Notes: (1) Measured with baluns on the input and output of the device. (2) Parts measured with 77 channels, +58 dBmV power, 13.5 dB tilt at 870 MHz. (3) Parts measured with 110 channels, +54 dBmV power, 13.5 dB tilt at 870 MHz. 4. All specifications as measured on Evaluation Board (see Figures 13 & 14). 4 ADVANCED PRODUCT INFORMATION - Rev 0.0 05/2003 ACA2404 PERFORMANCE DATA Figure 3: Noise Figure vs. Frequency (TA = +25 °C, VDD = +24 V) 5.0 4.5 Noise Figure (dB) 4.0 3.5 3.0 2.5 2.0 0 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) 24.0 23.5 23.0 22.5 Figure 4: Gain (S21) vs. Frequency (TA = +25 °C, VDD = +24 V, 75 W system) Gain (dB) 22.0 21.5 21.0 20.5 20.0 19.5 19.0 0 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) ADVANCED PRODUCT INFORMATION - Rev 0.0 05/2003 5 ACA2404 Figure 5: Input and Output Return Loss (S11 and S22) vs. Frequency (TA = +25 °C, VDD = +24 V, 75 W system) 0 -5 -10 Return Loss (dB) -15 -20 -25 -30 -35 -40 -45 -50 0 100 200 300 400 500 600 700 800 900 1000 S11 S22 Frequency (MHz) 0 -5 -10 -15 Figure 6: Isolation (S12) vs. Frequency (TA = +25 °C, VDD = +24 V, 75 W system) Isolation (dB) -20 -25 -30 -35 -40 -45 -50 0 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) 6 ADVANCED PRODUCT INFORMATION - Rev 0.0 05/2003 ACA2404 Figure 7: CTB vs. Frequency (110 channels, +54 dBmV power, 13.5 dB tilt at 870 MHz) -40 -45 -50 -55 CTB (dBc) -60 -65 -70 -75 -80 -85 -90 0 100 200 300 400 500 600 700 800 Frequency (MHz) Figure 8: CSO vs. Frequency (110 channels, +54 dBmV power, 13.5 dB tilt at 870 MHz) -50 -55 -60 -65 CSO (dBc) -70 -75 -80 -85 -90 -95 -100 0 100 200 300 400 500 600 700 800 Frequency (MHz) Figure 9: XMOD vs. Frequency (110 channels, +54 dBmV power, 13.5 dB tilt at 870 MHz) -40 -45 -50 -55 XMOD (dBc) -60 -65 -70 -75 -80 -85 -90 0 100 200 300 400 500 600 700 800 Frequency (MHz) ADVANCED PRODUCT INFORMATION - Rev 0.0 05/2003 7 ACA2404 Figure 10: CTB vs. Frequency (77 channels, +58 dBmV power, 13.5 dB tilt at 870 MHz) -40 -45 -50 -55 CTB (dBc) -60 -65 -70 -75 -80 -85 -90 0 100 200 300 400 500 600 Frequency (MHz) Figure 11: CSO vs. Frequency (77 channels, +58 dBmV power, 13.5 dB tilt at 870 MHz) -50 -55 -60 -65 CSO (dBc) -70 -75 -80 -85 -90 -95 -100 0 100 200 300 400 500 600 Frequency (MHz) Figure 12: XMOD vs. Frequency (77 channels, +58 dBmV power, 13.5 dB tilt at 870 MHz) -40 -45 -50 -55 XMOD (dBc) -60 -65 -70 -75 -80 -85 -90 0 100 200 300 400 500 600 Frequency (MHz) 8 ADVANCED PRODUCT INFORMATION - Rev 0.0 05/2003 ACA2404 APPLICATION INFORMATION Figure 13: Evaluation Board Layout C4 1 16 15 14 13 12 11 10 9 R2 +24 V Vt GND 2AIN GND 1AIN 1BIN ISET 2BIN GND ACA2404 GND 1AOUT Bias 1A 2AOUT 2BOUT Bias 1B 1BOUT GND L1 C6 C1 RF IN 2 3 L3 C10 TVS C15 T1 C2 C11 4 5 6 7 C8 C12 C13 C9 C7 L4 L2 C14 T2 RF OUT R1 R3 C3 8 IDD Adjust (+24 V) C5 Figure 14: Evaluation Board Schematic ADVANCED PRODUCT INFORMATION - Rev 0.0 05/2003 +24 V 9 ACA2404 Table 5: Evaluation Board Parts List R EF C 1, C 2, C 3, C 6, C 7, C 10, C 14 C 4, C 5, C 8, C 9 C11 C 15 C12, C13, R1, R2, R3 TVS L1, L2, L3, L4 R1 CONNECTOR (1) (4) DESCRIPTION 0.01 µF CHIP CAP 470 pF CHIP CAP 0.5 pF CHIP CAP 47 µF ELECT. CAP NOT USED TVS 24 VOLT 600 WATT 680 nH INDUCTOR 75 KΩ Resistor 75 Ω N MALE PANEL MOUNT Ferrite Core Wire Printed Circuit Board (3) QTY VENDOR 7 4 1 1 MURATA MURATA MURATA DIGI-KEY CORP VENDOR P/N GRM39X7R103K50V GRM39X7R471K50V GRM36COG0R5C50 P5275-ND 1 4 1 2 2 DIGI-KEY CORP COILCRAFT DIGI-KEY CORP PASTERNACK ENTERPRISES FAIR-RITE MWS WIRE IND. SMBJ24ACCCT-ND 1008CS-681XKBC P75KGCT-ND P E 4504 2843002702 T-2361429-20 24V X 1A C 50 14996Y T1, T2 (2) (BALUN) 1 1 STANDARD PRINTED CIRC. INC INDIUM CORP OF AMERICA INDIUM 300 X 160 MILS Notes: (1) N connector center pin should be approximately 80 mils in length. (2) T1, T2 balun: 6.5 turns thru, as shown in Figure 15. (3) Due to the power dissapation of this device, the printed circuit board should be mounted / attached to a heat sink. (4) 400 mA minimum current rating. Metalized traces on P.C.B. Pin #1 Keep leads twisted Wrap-around metal at corners - or vias Figure 15: Balun Drawing 10 ADVANCED PRODUCT INFORMATION - Rev 0.0 05/2003 ACA2404 PACKAGE OUTLINE Figure 16: S7 Package Outline - 16 Pin Wide Body SOIC with Heat Slug ADVANCED PRODUCT INFORMATION - Rev 0.0 05/2003 11 ACA2404 ORDERING INFORMATION ORDER NUMBER A C A 2404S 7P 2 A C A 2404S 7P 0 TEMPERATURE RANGE -40 to 110 oC -40 to 110 oC PACKAGE DESCRIPTION COMPONENT PACKAGING 16 Pin Wide Body 1,500 piece tape and reel SOIC with Heat Slug 16 Pin Wide Body Plastic tubes (25 pieces per tube) SOIC with Heat Slug ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 12 ADVANCED PRODUCT INFORMATION - Rev 0.0 05/2003