AWS5516S14

AWS5516 GaAs IC SPDT Reflective Switch DC-2.0 GHz PRELIMINARY DATA SHEET - Rev 1.2 FEATURES • • • • • • High Linearity (IP3 48 dBm @ 0.9 GHz) Low Insertion Loss (0.4 dB @ 0.9 GHz) 2.7 V to 6V Operation Low DC Power Consumption Ultra Miniature SOT-26 Package High Isolation APPLICATIONS • • • Transmit/receive switch Diversity switching Antenna selection PRODUCT DESCRIPTION The AWS5516 is a Single Pole Double Throw (SPDT) GaAs MMIC switch assembled in a SOT-26 plastic package. The AWS5516 is designed for applications that require low insertion loss, high isolation, high linearity, and small size. The switch can be controlled with positive, negative, or a combination of both voltages. S14 SOT-26 6 Pin Plastic Package Table 1: Pin Description Pin Vs C3 RFo u t 1 (J2) GND RFo u t 2 (J3) Optional Rs see Note 3 RFi n (J1) Function RF OUT 1 (J2) GND RF OUT 2 (J3) V2 RF IN (J1)/Vs V1 Description RF port can be used as an input or as an output. Ground connection. Keep as short as possible. RF port can be used as an input or an ouput. Control Voltage 2, Low 0V , High 3V to 5V RF common port and bias voltage for positive control (3V to 5V). Control Voltage 1, Low 0V , High 3V to 5V 1 2 3 4 5 6 1 2 3 C2 6 5 V1 C1 4 V2 Figure 1: Pin Layout Notes: 1. DC blocking capacitors C1,2,3 and optional resistor Rs must be supplied externally. 2. C1,2,3 = 100 pF for operation >500MHz. 3. The use of resistor Rs to the positive voltage supply is optional. It is only required if it is necessary to independently control the RF ports, such as selecting both ports to be OFF at the same time. 01-03 AWS5516 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER RF Input Power > 900 MHz, V Control Control Voltage Operating Temperature Storage Temperature ΘJC MIN -0.2 -40° -65 - MAX 6 +8 +85 +150 25° UNIT W V °C °C C/W Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges at 25° C PARAMETER Switching Characteritics 2 CONDITION Rise, Fall (10/90% or 90/10% RF) On, Off (50% CTL to 90/10% RF) Video Feedthru 2-tone power levels 13dBm to 27dBm (selected to optimize dynamic range of test) FREQUENCY MIN TYP 100 100 100 MAX UNIT nS nS mV Intermodulation Intercept Point (IP3) V CTL = 2.7V V CTL = 5.0V 1.0 GHz 1.8 GHz 1.0 GHz 1.8 GHz 1.0 GHz 1.8 GHz 1.0 GHz 1.8GHz 1 & 1.8 GHz +45 +42 +55 +52 +48 +46 +61 +56 +28 +27 +37 +37 -75 dBm dBm dBm dBm dBm dBm dBm dBm dBc 6 50 75 V µA µA Input power for 1dB Compression V CTL = 2.7V V CTL = 5.0V Harmonic Level Control Voltage (V CTL) Leakage Current 3 Input power = +30 dBm, VCTL = 5.0V Nominal operation voltage V CTL = 2.7V V CTL = 5.0V 2.7 The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. Notes: 1. All measurements made in a 50 ohm system, unless other specified. 2. Video feedthru measured with 1 ns rise time pulse and 500 MHz bandwidth. 3. VCTL is the absolute value of the differential voltage from V1 to V2. Changing polarity selects the switch path as defined in the truth table below. Use of the optional resistor Rs on the common port limits VHIGH to Vs ± 0.2V 2 PRELIMINARY DATA SHEET - Rev 1.2 08/2001 AWS5516 Table 4: Electrical Specifications at 25 °C (VCTL = 2.7V) PARAMETER 1 Insertion Loss Isolation VSWR 3 3 FREQUENCY DC - 1.0 GHz DC - 2.0 GHz DC - 1.0 GHz DC - 2.0 GHz 0.5 - 2.0 GHz 2 MIN TYP 0.35 0.45 MAX 0.45 0.55 UNIT dB dB 25 22 32 24 1.4:1 dB Notes: 1. All measurements made in a 50 Ω system, unless other specified. 2. DC= 300 kHz 3. In low insertion loss path. Table 5: Truth Table V1 V Low VHigh V2 VHigh VLow J1 - J2 Isolation Low Loss J1 - J3 Low Loss Isolation V CTL = V High – V Low = 2.7V to 8V (VHigh = Vs ± 0.2V when Rs used on common port.) PRELIMINARY DATA SHEET - Rev 1.2 08/2001 3 AWS5516 PERFORMANCE DATA Figure 2: Insertion Loss vs Frequency 1.0 0.9 30 35 Figure 3: Isolation vs Frequency 0.8 Insertion Loss (dB) 0.7 0.6 0.5 0.4 0.3 0.2 25 Isolation (dB) 20 1 5 1 0 5 0.1 0.0 0.5 1.0 1.5 2.0 2.5 0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) Frequency (GHz) Figure 4: VSWR vs Frequency Figure 5: TOI vs Control Voltage 1.4 65 60 1.3 1.2 TOI (dBm) VSWR 55 50 1.0GHz 1.1 45 1.8GHz 1.0 0.5 1.0 1.5 2.0 2.5 40 2.5 3 3.5 4 4.5 5 Frequency (GHz) Control Voltage (V) 4 PRELIMINARY DATA SHEET - Rev 1.2 08/2001 AWS5516 PACKAGE OUTLINE θ SYMBOLS DIMENSIONS IN MILLIMETERS DIMENSIONS IN INCHES A A1 A2 b C D E e H L θ1 NOTE 1. PACKAGE BODY SIZES EXCLUDE MOLD FLASH AND GATE BURRS 2. DIMENSION L IS MEASURED IN GAGE PLANE 3. COPLANARITY : 0.1000 mm 4. TOLERANCE ±0.1000 mm(4 mil) UNLESS OTHERWISE SPECIFIED MIN MAX 1.00 1.30 0.00 0.10 0.70 0.90 0.35 0.50 0.10 0.25 2.70 3.10 1.40 1.80 1.90(TYP) 2.60 3.00 0.37 −−− 1° 9° MIN MAX 0.039 0.051 0.00 0.004 0.027 0.035 0.014 0.020 0.004 0.010 0.106 0.122 0.055 0.071 0.075(TYP) 0.102 0.118 0.015 −−− 1° 9° Figure 6: S14 Package Outline Diagram PRELIMINARY DATA SHEET - Rev 1.2 08/2001 5 AWS5516 NOTES 6 PRELIMINARY DATA SHEET - Rev 1.2 08/2001 AWS5516 NOTES PRELIMINARY DATA SHEET - Rev 1.2 08/2001 7 AWS5516 ORDERING INFORMATION ORDER NUMBER AWS5516S14 PACKAGE DESCRIPTION S14 COMPONENT PACKAGING 6 Pin Plastic Package ANADIGICS, Inc. 35 Technology Drive Warren, New Jersey 07059 Tel: (908) 668-5000 Fax: (908) 668-5132 http://www.anadigics.com Mktg@anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. PRELIMINARY DATA SHEET - Rev 1.2 08/2001 8