PRFS-1003-0008

RFS1003 5.1-5.9 GHz U-NII Power Amplifier Applications • U-NII fixed-wireless CPE • 5 GHz ISM band wireless equipment • WLAN/802.11a/HIPERLAN/2 Product Description The RFS1003 power amplifier is a high-power, highperformance GaAs MESFET IC designed for use in transmit applications in the 5.1-5.9 GHz frequency band. With a P1dB of 29 dBm, the device is ideal as a final stage for wireless applications requiring high transmit linearity. The input of the PA is matched to 50 ohms and the output can be easily matched for optimum linearity and power performance at the desired frequency of operation between 5.1 and 5.9 GHz. GND GND GND VD2 VD1 24 N/C 23 22 21 20 19 N/C 1 2 Interstage Match 18 17 16 Input Match N/C N/C GND GND 3 4 5 6 Interstage Match RF OUT Product Features • • • • • 29 dBm P1dB@7V 24 dBm P1dB@3V 20 dB gain Input matched to 50 ohms Simple output matching RF IN 15 14 13 RF OUT GND RF OUT N/C GND 7 GND 8 VG1 9 GND 10 VG2 11 GND 12 VG3 Functional Block Diagram 1.00 0.80 4.00 4 0.45 0.35 0.275 0.225 Pin 1 24 1 1 ALL DIMENSIONS ARE IN MILLIMETERS, ANGLES IN DEGREES. 2 THE TERMINAL #1 IDENTIFIER AND PAD NUMBERING CONVENTION SHALL CONFORM TO JESD 95-1 SPP-012 3 LEAD COPLANARITY: 0.05 MAX. 4 DIMENSION APPLIES TO METALLIZED PAD AND IS MEASURED BETWEEN 0.25 AND 0.30 MM FROM PAD TIP. INDEX AREA 4.00 0.50 TYP 0.05 1.00 2.80 SQ TOP VIEW SIDE VIEW BOTTOM VIEW 4x4 mm Package Outline 05/2003 R FS1003 5.1-5.9 GHz U-NII Power Amplifier Parameter 1 Specification Min. 5150 29 24 28 20 21 ±0.5 -35 -35 -60 50 8.7 15 11 7 -1.1 400 350 25 Typ. Max. 5850 Unit MHz dBm dBm % dB dB dB dBc dBc dBc/30 kHz dB dB dB dB V V mA mA µA Condition Overall Frequency Range Output P1dB Efficiency at P1dB Small Signal Gain Gain Flatness Harmonics 2nd Harmonic 3rd Harmonic Spurious (Stability)2 Reverse Isolation Noise Figure Input Return Loss Output Return Loss Power Supply Drain Operating Voltage Gate Operating Voltage Current Consumption Gate Leakage Current VDD = 7V VDD = 3V PIN = -20 dBm; VDD = 7V PIN = -20 dBm; VDD = 3V Across 100 MHz Band PIN = -30 to +10 dBm 10 3 VDD = 7V VDD = 3V Note 1: Test Conditions: VDD = 7.0V, PIN = +10dBm, Freq. = 5850MHz, VGG = -1.1 V, T =25C. Note 2: Load VSWR is set to 7:1 and the angle is varied 360 degrees. Absolute Maximum Ratings Parameter DC Power Supply DC Gate Voltage DC Supply Current Maximum RF input level Operating Ambient Temperature Storage Temperature Rating 8.0 -5.0 min, -0.5 max 1000 +13 -40 to +85 -55 to +150 Unit V V mA dBm °C °C Ordering Information Part Number PRFS-1003-0EVL PRFS-1003-0005 PRFS-1003-0006 PRFS-1003-0007 PRFS-1003-0008 PRFS-1003-0009 Temp. Range ( °C) -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 Package Description Evaluation Board 13" Reverse Tape/Reel 13" Tape/Reel 7" Reverse Tape/Reel 7" Tape/Reel Bulk – 4x4 mm 24-pin LPCC Quantity 1 2500 pcs. 2500 pcs. 1000 pcs. 1000 pcs. 1-999 pcs. 2 05/2003 NOTES 05/2003 3 ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059,U.S.A. Tel: +1(908)668-5000 Fax: +1(908)668-5132 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 4 05/2003