AAT1117XMY-3.3-B1

$1$/2*,& 7(&+ General Description TM AAT1117 1 Amp Linear Regulator Features • • • • • • Guaranteed 1.2V max Dropout at max current Adjustable or Factory programmed output voltages Excellent performance over line, load Current limit protection Over-Temperature protection SOT-223, TO-252 (DPAK) and TO-220 packages The AAT1117 is a Positive Linear Regulator designed to deliver 1 amp. It features adjustable or fixed output voltages and excellent performance over line and load variations. The device is able to protect itself and the load from short circuit conditions with integrated current limiting circuitry. Thermal shutdown is activated to prevent damage under extreme conditions. The AAT1117 is available in surface mount SOT223 or TO-252 (DPAK), and through-hole TO-220 packages. Applications • • • • • Active SCSI Terminators High Efficiency Linear Regulators Post Regulators for Switching Supplies Battery Chargers 5V to 3.3V Linear Regulators Preliminary Information Typical Application INPUT IN OUTPUT AAT1117 GND/ADJ OUT 10uF 10uF Advanced Analogic Technologies, Inc. 1250 Oakmead Pkwy, Suite 310, Sunnyvale, CA 94086 (408)524-9684 Fax (408)524-9689 2-1 1117.2000.05.0.92 $1$/2*,& 7(&+ Symbol VIN IOUT TJ ΘJA ΘJA ΘJA PD PD PD TLEAD TM AAT1117 1 Amp Linear Regulator Absolute Maximum Ratings (TA=25°C unless otherwise noted) Description Input Voltage DC Output Current Operating Junction Temperature Range Thermal Resistance (SOT-223) Thermal Resistance (TO-252) Thermal Resistance (TO-220) Maximum Power Dissipation (SOT-223) Maximum Power Dissipation (TO-252) Maximum Power Dissipation (SOT-220) Maximum Soldering Temperature (at leads, 10 sec) Max 15 PD/(VIN-VO) 0 to 125 150 80 60 Internally Limited 300 Units V mA °C °C/W °C/W °C/W mW mW mW °C Note: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. Functional operation at conditions other than the operating conditions specified is not implied. Only one Absolute Maximum rating should be applied at any one time. Recommended Operating Conditions Symbol VIN T Description Input Voltage Ambient Temperature Range Rating VOUT+1.2 to 13.2 Units V °C -40 to +85 Electrical Characteristics AAT1117-ADJ(TJ=25°C unless otherwise noted) Symbol VREF ∆VOUT/ VOUT ∆VOUT/ VOUT VDO ILIM TC ∆V/∆T IADJ ∆IADJ IOUTMIN VN PSRR Description Reference Voltage Conditions VIN = 5V, IOUT = 10mA TJ=25°C Full temp Min 1.238 1.225 Typ 1.250 1.250 Max 1.262 1.275 0.2 0.3 0.4 0.3 0.4 1.2 % Units V Line Regulation Load Regulation Dropout Voltage 1 Current Limit Ouput Voltage Temp. Coeff. Temperature Stability Adjust Pin Current Adjust Pin Current Change Minimum Load Current RMS Output Noise Ripple Rejection Ratio VIN = 4.75 - 7V, TJ=25°C IOUT = 10mA TJ=25°C VIN = 4.75 - 15V, IOUT = 10mA Full temp TJ=25°C VIN = 5V, IOUT = 10mA -1A Full temp IOUT = 10mA -1A, Full temp ∆VOUT = ±1% VIN = 2.75 - 7V Full temp VIN = 2.75 - 7V, IOUT = 10mA - 1A VIN = 5V, IOUT = 100mA, Full temp TJ=25°C VIN = 2.75 - 7V, IOUT = 10mA - 1A Full temp VIN = 2.75 - 7V, IOUT = 10mA - 1A, Full temp VIN = 5V TJ = 25°C VIN = 5V, IOUT = 1A, Full temp 0.05 0.2 1.0 1.0 0.005 0.5 55 % V A %/°C % 90 0.2 5 0.003 72 5 10 µA µA mA %VOUT dB 60 Advanced Analogic Technologies, Inc. 1250 Oakmead Pkwy, Suite 310, Sunnyvale, CA 94086 (408)524-9684 Fax (408)524-9689 2-2 1117.2000.05.0.92 $1$/2*,& 7(&+ Symbol VOUT ∆VOUT/ VOUT ∆VOUT/ VOUT VDO ILIM IQ TC ∆V/∆T VN PSRR Description Output Voltage TM AAT1117 1 Amp Linear Regulator Electrical Characteristics AAT1117-3.3 (fixed)(TJ=25°C unless otherwise noted) Conditions VIN = 5V, IOUT = 0A TJ=25°C Full temp Min 3.270 3.234 Typ 3.30 3.30 Max 3.330 3.336 0.2 0.3 0.4 0.3 0.4 1.2 % Units V Line Regulation Load Regulation Dropout Voltage 1 Current Limit Quiescent Current Ouput Voltage Temp. Coeff. Temperature Stability RMS Output Noise Ripple Rejection Ratio VIN = 4.75 - 7V, TJ=25°C IOUT = 0A TJ=25°C VIN = 4.75 - 15V, IOUT = 0A Full temp TJ=25°C VIN = 5V, IOUT = 0A -1A Full temp IOUT = 0A -1A, ∆VOUT = ±1%, Full temp VIN = 4.75 - 7V, Full temp VIN = 5V, IOUT = 0-1A, Full temp VIN = 4.75 - 7V, IOUT = 0 - 1A VIN = 5V, IOUT = 100mA, Full temp TJ = 25°C VIN = 5V, IOUT = 1A, Full temp 0.05 0.2 1.0 1.0 6 0.005 0.5 0.003 72 % V A mA %/°C % %VOUT dB 13 60 Note 1: VDO is defined as VIN - VOUT when VOUT is 98% of nominal. Advanced Analogic Technologies, Inc. 1250 Oakmead Pkwy, Suite 310, Sunnyvale, CA 94086 (408)524-9684 Fax (408)524-9689 2-3 1117.2000.05.0.92 $1$/2*,& 7(&+ Pin Descriptions Pin # 1 TM AAT1117 1 Amp Linear Regulator Symbol GND/ADJ Function For the fixed version of AAT1117, pin 1 is the ground connection. For the adjustable version, this pin is the ADJ pin. See detailed description for further information regarding configurations. Output pin – should be decoupled with 10µF tantalum or greater output capacitor. Input pin - should be decoupled with 10µF tantalum or greater capacitor. 2 3 OUT IN Functional Block Diagram VIN VOUT Over-Current Protection Over-Temp Protection VREF GND/ADJ Advanced Analogic Technologies, Inc. 1250 Oakmead Pkwy, Suite 310, Sunnyvale, CA 94086 (408)524-9684 Fax (408)524-9689 2-4 1117.2000.05.0.92 $1$/2*,& 7(&+ Ordering Information Output Voltage 3.3V 3.3V 3.3V Adjustable Adjustable Adjustable TM AAT1117 1 Amp Linear Regulator Package SOT-223 TO-252 (DPAK) TO-220 SOT-223 TO-252 (DPAK) TO-220 Marking Part Number Bulk AAT1117XMY-3.3-B1 N/A AAT1117XPY-3.3-B1 AAT1117XMY-ADJ-B1 N/A AAT1117XPY-ADJ-B1 Tape and Reel AAT1117XMY-3.3-T1 AAT1117XNY-3.3-T1 N/A AAT1117XMY-ADJ-T1 AAT1117XNY-ADJ-T1 N/A Advanced Analogic Technologies, Inc. 1250 Oakmead Pkwy, Suite 310, Sunnyvale, CA 94086 (408)524-9684 Fax (408)524-9689 2-5 1117.2000.05.0.92 $1$/2*,& 7(&+ TM AAT1117 1 Amp Linear Regulator Pin Configuration SOT-223 (Top View) TO-252 (Top View) VIN VOUT GND/ADJ TO-220 (Top View) VIN VOUT (connected with heat sink) GND VIN VOUT ADJ/GND Advanced Analogic Technologies, Inc. 1250 Oakmead Pkwy, Suite 310, Sunnyvale, CA 94086 (408)524-9684 Fax (408)524-9689 2-6 1117.2000.05.0.92 $1$/2*,& 7(&+ Package Information TO 220 TM AAT1117 1 Amp Linear Regulator Dim A b C1 D E e e1 e3 F H1 K CP Q L a b1 R Note: E A F Q CP H1 a ( 5X) D E - PIN b1 L R e3 b C1 H e e1 Millimeters Min Max 4.06 4.83 0.63 1.02 0.38 0.56 14.22 14.99 9.78 10.54 2.29 2.79 4.83 5.33 1.14 1.40 1.14 1.40 5.94 6.55 2.29 2.92 3.71 3.96 2.62 2.87 13.16 13.79 3° 7° 1.14 1.52 6.17 REF Inches Min Max 0.160 0.190 0.025 0.040 0.015 0.022 0.560 0.590 0.385 0.415 0.090 0.110 0.190 0.210 0.045 0.055 0.045 0.055 0.234 0.258 0.090 0.115 0.146 0.156 0.103 0.113 0.518 0.543 3° 7° 0.045 0.060 0.243 REF 1. Dimension C1 apply for TIN plate finish. 2. For solder DIP lead finish dimension, C1 should be 0.015”~0.027” (0.38mm~0.69mm) SOT 223 D B Dim A A1 B B1 C D e e1 E H S t θ θ1 θ2 Note: 02 0 c H E e S A 01 Millimeters Min Max 1.50 4.83 0.02 1.02 2.95 0.56 0.65 14.99 0.25 10.54 6.30 2.79 2.30 TYP 4.60 TYP 3.30 1.40 6.70 6.55 0.85 2.92 1.10 3.96 10° MAX 10 16° 10 16° Inches Min Max 0.060 0.067 0.001 0.004 0.116 0.124 0.026 0.033 0.100 0.014 0.248 0.264 0.0905 TYP 0.181 TYP 0.130 0.146 0.264 0.287 0.033 0.041 0.043 0.051 10° MAX 10° 16° 10° 16° t A1 B1 e1 1. 2. Package outline exclusive of any mold flashes dimension. Package outline exclusive of burr dimension. Advanced Analogic Technologies, Inc. 1250 Oakmead Pkwy, Suite 310, Sunnyvale, CA 94086 (408)524-9684 Fax (408)524-9689 2-7 1117.2000.05.0.92 $1$/2*,& 7(&+ TO - 252 ( D PA K ) TM AAT1117 1 Amp Linear Regulator Dim A B C D E F G H I J K L Note: 1. 2. E K L B A F Millimeters Min Max 0.45 0.55 1.65 1.95 0.90 1.50 0.45 0.60 6.40 6.80 5.40 5.80 2.20 2.85 0.00 *2.30 0.00 0.90 0.00 0.80 5.20 5.50 1.20 1.60 Inches Min Max 0.0177 0.0217 0.0650 0.0768 0.0354 0.0591 0.0177 0.0236 0.2520 0.2677 0.2126 0.2283 0.0866 0.1122 0.0000 *0.0906 0.0000 0.0354 0.0000 0.0315 0.2047 0.2165 0.0472 0.0630 M J H G C D Controlling dimension: Millimeters. Maximum lead thickness includes lead finish thickness; minimum lead thickness is the minimum thickness of base material. Advanced Analogic Technologies, Inc. 1250 Oakmead Pkwy, Suite 310, Sunnyvale, CA 94086 (408)524-9684 Fax (408)524-9689 2-8 1117.2000.05.0.92