0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
AAT3129

AAT3129

  • 厂商:

    ANALOGICTECH(研诺)

  • 封装:

  • 描述:

    AAT3129 - High Efficiency 1X/1.5X/2X Charge Pump for RGB Color LED Applications - Advanced Analogic ...

  • 详情介绍
  • 数据手册
  • 价格&库存
AAT3129 数据手册
AAT3129 High Efficiency 1X/1.5X/2X Charge Pump for RGB Color LED Applications General Description The AAT3129 is a high efficiency charge pump DC/DC converter with tri-mode load switch (1X) fractional (1.5X) and doubling (2X) conversion for color LED applications. A single current source output provides a regulated current to drive R, G, and B LEDs via three internal switches. With a simple single wire serial bus, the RGB module can be easily controlled to display 4096 colors. AnalogicTech's Advanced Simple Serial Control™ (AS2Cwire™) serial digital input is used to enable, disable, and set the duty cycle of each internal MOSFET switch. Low external parts count (two 1µF flying capacitors and two small bypass capacitors at VIN and OUT) makes the AAT3129 ideally suited for small battery-powered applications. The AAT3129 has a thermal management system to protect the device in the event of a short-circuit condition on any of the output pins. Built-in softstart circuitry prevents excessive inrush current during start-up. High switching frequency enables the use of small external capacitors. A low current shutdown feature disconnects the load from VIN and reduces quiescent current to less than 1µA. The AAT3129 is available in a Pb-free, 12-pin TSOPJW package. Features • • • • • • • • • • • • ChargePump™ VIN Range: 2.7V to 5.5V Common Anode RGB LED Control 4096 Color with Single Wire Digital Control 40mA to 180mA Fixed Current Source AS2Cwire Digital Brightness Control Low Noise Constant Frequency Operation Small Application Circuit Regulated Output Current No Inductors 1MHz Switching Frequency IQ
AAT3129
1. 物料型号: - 型号:AAT3129 - 描述:高效率1X/1.5X/2X电荷泵,用于RGB彩色LED应用。

2. 器件简介: - AAT3129是一款高效率的电荷泵DC/DC转换器,具有三模式负载开关(1X)、分数(1.5X)和倍增(2X)转换功能,适用于彩色LED应用。通过三个内部开关为红、绿、蓝LED提供稳定的电流。使用单线串行总线,RGB模块可以轻松控制以显示4096种颜色。

3. 引脚分配: - 1号引脚:C2+,飞电容2正极。 - 2号引脚:CP,电荷泵输出。 - 3号引脚:C1-,飞电容1负极。 - 4号引脚:C1+,飞电容1正极。 - 5号引脚:ISRC,电流源输出。 - 6号引脚:EN/SET,AS2Cwire控制引脚。 - 7号引脚:DB,开路开关蓝色二极管阴极。 - 8号引脚:DG,开路开关绿色二极管阴极。 - 9号引脚:DR,开路开关红色二极管阴极。 - 10号引脚:GND,地。 - 11号引脚:IN,输入电源。 - 12号引脚:C2-,飞电容2负极。

4. 参数特性: - 输入电压范围:2.7V至5.5V。 - 固定电流源:40mA至180mA。 - 低噪声恒频操作。 - 无电感器。 - 开关频率:1MHz。 - 林 Shutdown电流:小于1µA。

5. 功能详解: - AAT3129具有热管理系统,可在输出引脚短路时保护设备。内置软启动电路可防止启动时电流过大。高开关频率允许使用较小的外部电容器。低电流Shutdown功能可断开负载与输入电压的连接,将静态电流降至小于1µA。

6. 应用信息: - 时尚RGB、移动手机、MP3播放器、PDA、便携设备、RGB彩色LED、RGB摄影闪光灯、智能手机。

7. 封装信息: - AAT3129提供无铅的12引脚TSOPJW封装。
AAT3129 价格&库存

很抱歉,暂时无法提供与“AAT3129”相匹配的价格&库存,您可以联系我们找货

免费人工找货