AAT4682

Dual Electronic Resettable Switch General Description The AAT4682 dual electronic resettable fuse is a member of AnalogicTech’s Application Specific Power MOSFET™ (ASPM™) product family. It has two 1A current limited P-channel MOSFET power devices that remain fully enhanced as long as the input power supply is above an under-voltage lockout threshold and the load is below the current limit setting. If the load increases above the current limit setting, as is the case during a short circuit, the MOSFET effectively becomes a constant current source equal to the current limit. If the current limit condition persists long enough to heat the MOSFET to an extreme temperature, both devices will thermal cycle off and on until the current limit condition is removed. Independent open drain FAULT flags signal an over-current or over-temperature condition. Quiescent current typically is a low 10µA. The AAT4682 is available in a Pb-free, 6-pin SOT23 package and is specified over the -40°C to +85°C temperature range. AAT4682 Features • • • • • • • • • • • SmartSwitch™ Dual P-Channel MOSFETs 500mA Steady State Load Current 600mA Minimum Current Limit Trip Point Low Quiescent Current, Typically 10µA Over-Temperature Protection Fast Transient Response: —