1M803S

Model 1M803S Rev. C Micro Xinger 3dB Hybrid Coupler Description The 1M803S Micro Xinger® is a low profile, miniature 3dB hybrid coupler in an easy to use surface mount package designed for U-NII, ISM and hyperLAN applications. The 1M803S is designed for balanced amplifiers and signal distribution and is an ideal solution for the ever increasing demands of the wireless industry for smaller printed circuit boards and high performance. Parts have been subjected to rigorous qualification testing and units are 100% tested. They are manufactured using materials with x and y thermal expansion coefficients compatible with common substrates such as FR4 and G-10. Produced with 6 of 6 RoHS compliant tin immersion. ELECTRICAL SPECIFICATIONS** Features: • 5.0 – 6.0 GHz • Very Low Loss • High Isolation • 90o Quadrature • • • • • Surface Mountable Tape And Reel New Micro-Package 100% Tested Lead Free Frequency GHz Isolation dB Min Insertion Loss dB Max VSWR Max:1 5.0 – 6.0 Amplitude Balance dB Max 20 Phase Balance Degrees 0.25 Power Ave. CW Watts 1.21 ΘJC ºC/Watt Operating Temp. ºC ± 0.30 ±3 20 78.1 -55 to +85 **Specification based on performance of unit properly installed on microstrip printed circuit boards with 50 Ω nominal impedance. Specifications subject to change without notice. Mechanical Outline .065±.007 [1.66±0.18] Pin 1 .400±.010 [10.16±0.25] Pin 2 GND .200±.010 [5.08±0.25] 4X .048±.00 [1.22±0. .104±.004 [2.64±0.10] Denotes Array Number .304±.004 [7.72±0.10] 4X .024±.004 [0.61±0.10] Pin 4 GND Pin 3 Dimensions are in Inches [Millimeters] 1M803S Mechanical Outline Tolerances are Non-Cumulative Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model 1M803S Rev. C Typical Performance: 5.0 GHz. to 6.0 GHz. Coupling 1M803S -2.8 -10 Isolation 1M803S -3 -20 Coupling (dB) -3.2 -3.4 -3.6 5000 5200 5400 5600 5800 6000 Isolation (dB) -30 -40 -50 5000 5200 5400 5600 5800 6000 Frequency (MHz) Return Loss 1M803S 0 -87 Frequency (MHz) Phase Balance 1M803S -10 -88 Return Loss (dB) -20 -30 -40 -50 5000 5200 5400 5600 5800 6000 Phase Balance (D ) -89 -90 -91 -92 -93 5000 5200 5400 5600 5800 6000 Frequency (MHz) Frequency (MHz) Pin Configuration Mounting Footprint To ensure proper electrical and thermal performance there must be a ground plane with 100% solder connection underneath the part Multiple plated thru holes to ground .300 [7.62] .100 [2.54] 4X .034 [0.86] 4X .063 SQ [1.60] 4X 50 Transmission Line Dimensions are in Inches [Millimeters] 1M803S Mounting Footprint USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing. Model 1M803S Rev. C Carrier Tape Parts are oriented in embossed tape as shown below .157 [4.00] .012 [.30] .079 [2.00] A Ø.059 [Ø1.50] .069 [1.70] _ .453 [11.50] .433 [11.00] MODEL NO. .945 [24.00] .094 [2.40] SECTION A-A Dimensions are in inches [mm] .228 [5.80] A .315 [8.00] Direction of Part Feed (Unloading) Reel • Parts are available in both reel and tube • Quantity of 48 parts available per tube ØA ØC ØD QUANTITY/REEL 2000 TABLE 1 REEL DIMENSIONS (inches [mm]) ØA 13.0 [330.2] B 0.945 [24.0] ØC 4.0 [101.6] ØD 0.512 [13.0] B Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392