A1101R09A-EZ4A

EZ4x Module Series A1101R09C-EZ4x The A1101R09C-EZ4x is a high-performance demonstration platform, designed to showcase Anaren's family of FCC & IC certified AIR Modules. It features an A1101R09C AIR 900 MHz connectorized Module, and is designed to quickly connect to the Texas Instruments eZ430 Development Kit battery board or USB debugging interface Product Overview The A1101R09C-EZ4x is a target board assembly with the Anaren A1101R09C radio module in the industry’s smallest package (9 x 12 x 2.5mm) mounted on it. This module is fully compliant with Texas Instruments eZ430-RF2500 Development Kit, and plugs directly into either the battery board or USB debugging interface via the 6 pin header. It is designed to be a direct-replacement for the access point and end point target board modules included with the Texas Instrument eZ430RF2500 Development Kit. Each Anaren A1101R09C Radio Module is FCC & IC certified and incorporates the Texas Instruments CC1101 transceiver chip. button connector receptacle. This module is designed to effortlessly integrate into a wide range of applications, including: industrial control, building automation, low-power wireless sensor networks, lighting control, and automated meter reading. As a stand-alone module for your final design implementation, Anaren’s A1101R09C has an LGA pad footprint with an industry-standard U.FL Layout Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057 800.411.6596 / http://www.anaren.com / AIR@anaren.com Nomenclature Pin Diagram EZ4x Connections A 1 2 3 4 5 Battery / USB: ST1 ST2 ST3 ST4 ST5 ST6 P3.4 / UCA0TXD / UCA0SIMO GND RST / SBWTDIO TEST / SBWTCK VCC (3.6V) P3.5 / UCA0RXD / UCA0SOMI Chip series Function Frequency band Form factor Module Type 6 Firmware (EZ4 only) (Anaren) (CC1101, CC110L, CC2500) (R = radio only) (x100MHz) (A = Internal Antenna, C = Connector) (EM1 = Eval Module, EZ4x = EZ-430 Module) (A = Access Point, E = End Point, X = Custom (or no firmware) To view the entire available family of AIR Modules & Development options, please visit our website at: http://www.anaren.com/air Interface: P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 GND VCC P2.0 / ACLK / A0 / OA0I0 P2.1 / TAINCLK / SMCLK / A1 /A0O P2.2 / TA0 / A2 / OA0I1 P2.3 / TA1 / A3 / VREF– / VeREF–/ OA1I1 / OA1O P2.4 / TA2 / A4 / VREF+ / VeREF+/ OA1I0 P4.3 / TB0 / A12 / OA0O P4.4 / TB1 / A13 / OA1O P4.5 / TB2 / A14 / OA0I3 P4.6 / TBOUTH / A15 / OA1I3 GND P2.6 / XIN (GDO0) P2.7 / XOUT (GDO2) P3.2 / UCB0SOMI / UCB0SCL P3.3 / UCB0CLK / UCA0STE P3.0 / UCB0STE / UCA0CLK / A5 P3.1 / UCB0SIMO / UCB0SDA PLEASE NOTE: Additional information on the Texas Instruments CC1101 Development Kit can be found in the company’s latest datasheet release at http://www.ti.com This product is not to be used in any implantable medical device or external medical device intended to regulate or monitor biological functions, including but not limited to devices such as pacemakers, defibrillators, cardiac resynchronization devices, pressure sensors, biochemical stimulators and neurostimulators. ANAREN MAKES NO WARRANTY OF FITNESS OR MERCHANTABILITY OF THIS PRODUCT FOR ANY USE OF THIS TYPE. Anaren shall not be responsible for any consequential damages arising from the sale or use of this product for any use of this type. The ultimate user of the product assumes all risk of personal injury or death arising from a prohibited use. Caution! ESD sensitive device. Precautions should be used when handling the device in order to prevent permanent damage. Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057 800.411.6596 / http://www.anaren.com / AIR@anaren.com 1219a