B0430J50100AHF

Anaren Syracuse(SYR) A TTM Technologies Company 6635 Kirkville Rd. East Syracuse, NY 13057 Tel 315.432.8909 www.ttm.com www.anaren.com June 5th, 2018 Notice of Specification Change Customer: Anaren P/N: All 42124-G001/B0430J50100AHF Anaren PCN # 00001 Notice of Specification Change(s): Anaren regrets to inform you that a specification change is required for the B0430J50100AHF balun. We are splitting the band into two narrow bands, 400 – 2500MHz and 2501 – 3000MHz. The tables below outline the current specifications and updated specifications on the datasheet. Current Data Sheet Specifications: Frequency Return Loss Insertion Loss Amplitude Balance Phase Balance Power Handling Operating Temp. MHz dB Min dB Max dB Max Deg Min Watts Max ºC 400 - 3000MHz 8.4 4.0 1.4 12 0.4 -55 to +105 Waiver Specifications: Frequency Return Loss Insertion Loss Amplitude Balance Phase Balance Power Handling Operating Temp. MHz dB Min dB Max dB Max Deg Min Watts Max ºC 400 - 2500MHz 8.4 4.0 1.4 12 0.4 -55 to +105 2501 - 3000MHz 7.0 4.0 1.4 12 0.4 -55 to +105 Justification: When Anaren originally established the specifications for this part, they were based on estimated projections for material and process stability established during low volume pilot builds. As we have increased production quantities, it has become apparent that these projections were too optimistic. The net result is that this part has had consistently poor yield. Anaren Microwave, Inc. 6635 Kirkville Road East Syracuse, NY 13057 Phone: 315 432 8909 Fax: 315 432 8970 www.anaren.com Model B0430J50100AHF Rev D PRELIMINARY Ultra Low Profile 0805 Balun 50Ω to 100Ω Balanced Description The B0430J50100AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed specifically for differential inputs and output locations on next generation A to D and D to A Converter IC’s in an easy to use surface mount package, covering 400 MHz–3000 MHz. The B0430J50100AHF is ideal for high volume manufacturing and delivers higher performance than traditional wire wound baluns. The B0430J50100AHF has an unbalanced port impedance of 50 and a 100 balanced port impedance. This transformation enables single ended signals to be applied to differential ports. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The B0430J50100AHF is available on tape and reel for pick and place high volume manufacturing. Note that for optimal performance, the B0430J50100AHF should be used with a 10 pF series capacitor on the unbalanced port as shown in p. 2 & 3. Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25C) Features:           400 – 3000 MHz 0.7mm Height Profile 50 Ohm to 2 x 50 Ohm Low Insertion Loss Designed for A-D and D-A Converters Surface Mountable Tape & Reel Non-conductive Surface RoHS Compliant Halogen Free Parameter Min. Frequency Unbalanced Port Impedance Balanced Port Impedance Return Loss Insertion Loss* Amplitude Balance Phase Balance CMRR Power Handling Operating Temperature 400 Typ. 50 100 9.9 3.4 0.7 7 25 8.4 Max Unit 3000 MHz Ω Ω dB dB dB Degrees dB Watts ºC 4.0 1.4 12 @85C 0.4 +105 -55 * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing TOP VIEW (Near Side) SIDE VIEW BOTTOM VIEW (Far Side) 4x 0.37 2.04±0.10 0.64±0.06 1 2 3 2x 0.15 1.29±0.10 6x 0.98 Orientation Marker Denotes Pin Location Orientation Marker Denotes Pin Location Mechanical Outline -Dimensions are in Millimeters Pin 1 2 3 4 5 6 6x 0.22 6 5 4 4x 0.65 6x 0.30 Designation GND Unbalanced GND Balanced Port NC Balanced Port Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model B0430J50100AHF Rev D Typical Performance: 300 MHz. to 3100 MHz. with an external 10 pF capacitor on pin 2 Return Loss - Input Insertion Loss 0 0 -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -1.5 -18 [dB] -21 -1.8 -2.1 -24 -2.4 -27 -2.7 -30 -3 -33 -3.3 2500 2700 2900 3100 2700 2900 3100 2300 2300 2500 2100 2100 1900 1700 1500 1300 Frequency [MHz] 1100 900 300 700 -3.6 3100 2700 2900 2500 2300 2100 1900 1700 1500 1300 1100 900 700 500 300 -36 500 [dB] -15 Frequency [MHz] Phase Balance 1.5 15 1 10 0.5 5 Frequency [MHz] 1900 1700 1500 1300 3100 2900 2700 2500 2300 2100 1900 1700 1500 1300 1100 -20 900 -2 700 -15 500 -1 -1.5 1100 -5 -10 900 -0.5 700 0 500 0 300 deg 20 300 [dB] Amplitude Balance 2 Frequency [MHz] CMRR 0 -3 -6 -9 -12 -18 -21 -24 -27 -30 -33 3100 2900 2700 2500 2300 2100 1900 1700 1500 1300 1100 900 700 500 -36 300 [dB] -15 Frequency [MHz] Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model B0430J50100AHF Rev D PRELIMINARY Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. This component requires a 10 pF capacitor to be mounted in front of the unbalanced port (Pin 2) of the balun as shown in the drawing below for optimum performance. The capacitor should be placed as close as possible to the balun to minimize transmission line effects as shown in the suggested PCB footprint below. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. Dimensions are in Millimeters Mounting Footprint Circuit Pattern Footprint Pad (s) Solder Resist 0402 Capacitor 6x .41 .04 6x .33 .66 3x Transmission lines 4x .25 3x Plated thru holes to ground Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model B0430J50100AHF Rev D Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-D. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282