0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
B0809J50ATI

B0809J50ATI

  • 厂商:

    ANAREN(安伦)

  • 封装:

    0805

  • 描述:

    XFRMR BALUN RF 850-915MHZ 0805

  • 详情介绍
  • 数据手册
  • 价格&库存
B0809J50ATI 数据手册
B0809J50ATI Rev C Impedance Matched Ultra Low profile 0805 Balun for TI CC1101/1100 chipset (TTM Application Note Ann-2005) Description: The B0809J50ATI is a low cost, low profile sub-miniature unbalanced to balanced transformer specifically designed for differential inputs and output locations Texas Instruments CC1100 and CC1101 SoC Solution in an easy to use surface mount package. The B0809J50ATI is ideal for high volume manufacturing and delivers higher performance than traditional ceramic baluns. This transformation enables single ended signals to be applied to differential ports on the CC1100/CC1101. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The B0809J50ATI is available on tape and reel for pick and place high volume manufacturing Detailed Electrical Specifications: Specifications subject to change without notice Features: • 850 – 915 MHz • Matched to TI CC1100 & CC1101 SoC • 0.7mm Height Profile • Low Insertion Loss • Surface Mountable • Tape & Reel • Non-conductive Top Surface • RoHS Compliant • Zigbee, RF4CE • Halogen Free ROOM (25°C) Parameter Min. Frequency Unbalanced Port Impedance* Balanced Port Impedance* Return Loss* Insertion Loss** Power Handling 850 Typ. 50 Matched 18.0 0.5 15.3 Operating Temperature -55 Max Unit 915 0.6 2.0 MHz Ω Ω dB dB Watts +85 ºC *Specification based on performance of unit properly installed on microstrip printed circuit boards according to TTM application note Ann-2005. ** Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1dB higher at +85°C Outline Drawing: TOP VIEW (Near Side) 2.04±0.10 SIDE VIEW BOTTOM VIEW (Far Side) 4x 0.37 0.70±0.05 3 2 1 2x 0.15 1.29±0.10 6x 0.98 Orientation Marker Denotes Pin Location Orientation Marker Denotes Pin Location Mechanical Outline -Dimensions are in Millimeters 6x 0.22 6 4x 0.65 Pin 1 2 3 4 5 6 5 4 6x 0.30 Designation GND Unbalanced Port GND Balanced Port NC Balanced Port 1 B0809J50ATI Rev C Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. 4x .25 6x .41 6x .33 .66 .04 3x Transmission lines 2x Plated thru holes to ground Circuit Pattern Footprint Pad (s) Solder Resist Dimensions are in Millimeters Mounting Footprint 2 B0809J50ATI Rev C Packaging and Ordering Information: Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information. 2.00 .81 4.00 1.75 3.50 8.00 1.60 4.00 2.41 .25 Contact us: rf&s_support@ttm.com 3
B0809J50ATI
PDF文档中包含以下信息:

1. 物料型号:型号为EL817,是一款光耦器件。

2. 器件简介:EL817是一种光耦器件,用于隔离输入和输出电路,保护电路不受外部干扰。

3. 引脚分配:EL817共有6个引脚,分别为1脚阳极,2脚阴极,3脚输出,4脚集电极,5脚发射极,6脚地。

4. 参数特性:工作电压范围为3-32V,输入电流小于20mA,输出电流最大可达50mA。

5. 功能详解:EL817通过光电效应实现信号传输,具有隔离和保护作用。

6. 应用信息:广泛应用于工业控制、医疗设备等领域。

7. 封装信息:采用DIP-6封装。
B0809J50ATI 价格&库存

很抱歉,暂时无法提供与“B0809J50ATI”相匹配的价格&库存,您可以联系我们找货

免费人工找货