BD1631J50100AHF

Model BD1631J50100AHF Rev K Ultra Low Profile 0805 Balun 50Ω to 100Ω Balanced Description The BD1631J50100AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation wireless chipsets in an easy to use surface mount package covering 802.11b+g+n, GSM, DCS, PCS and UMTS. The BD1631J50100AHF is ideal for high volume manufacturing and is higher performance than traditional ceramic and lumped element baluns. The BD1631J50100AHF has an unbalanced port impedance of 50 and a 100 balanced port impedance*. This transformation enables single ended signals to be applied to differential ports on modern semiconductors. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The BD1631J50100AHF is available on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications*: Specifications subject to change without notice. ROOM (25C) Features:             1.6 – 3.1 GHz 0.7mm Height Profile 50 Ohm to 2 x 50 Ohm 802.11 b & g +n Compliant Low Insertion Loss DCS, PCS & UMTS Compliant Input to Output DC Isolation Surface Mountable Tape & Reel Non-conductive Surface RoHS Compliant Halogen Free Parameter Frequency Unbalanced Port Imp. Balanced Port Imp.** Return Loss Insertion Loss*** Amplitude Balance Phase Balance Power Handling @85C Power Handling @100C Power Handling @105C Operating Temperature Min. Typ. 2.0 14 -55 50 100 17 0.6 0.15 2.3 Max Min. 2.5 1.6 10 0.8 0.6 4.8 0.8 0.55 0.48 +140 Typ. 50 100 13 0.7 0.7 2.3 -55 Max Unit 3.1 GHz Ω Ω dB dB dB Degrees Watts Watts Watts ºC 1.0 1.0 4.8 0.8 0.55 0.48 +140 * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD1631J50100AHF Rev K Typical Broadband Performance: 500 MHz to 8500 MHz. Insertion Loss 0 -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 7000 7500 8000 8500 7500 8000 8500 5500 5500 5000 4500 4000 3500 3000 2500 2000 1500 8500 8000 7500 7000 6500 -20 6000 -2 5500 -15 5000 -1.5 4500 -10 4000 -1 1000 0 -5 500 0 -0.5 3500 6500 5 3000 7000 10 2500 6000 1 0.5 2000 6500 15 deg 1.5 1500 5000 Phase Balance 20 500 6000 Amplitude Balance 2 1000 4500 Frequency [MHz] Frequency [MHz] [dB] 4000 500 8500 8000 7500 7000 6500 6000 5500 5000 4500 4000 3500 3000 2500 2000 -3.6 1500 -36 500 -3.3 1000 -3 -33 3500 -2.7 -30 3000 -2.4 -27 2500 -2.1 -24 2000 -1.8 -21 1500 -18 1000 [dB] [dB] Re turn Loss - Input 0 Frequency [MHz] Frequency [MHz] CMRR 0 -3 -6 -9 -12 -18 -21 -24 -27 -30 -33 8500 8000 7500 7000 6500 6000 5500 5000 4500 4000 3500 3000 2500 2000 1500 500 -36 1000 [dB] -15 Frequency [MHz] Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD1631J50100AHF Rev K Typical Performance: 1600 MHz to 3100 MHz Inse rtion Loss -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 2800 2900 3000 3100 2900 3000 3100 2500 2400 2300 2200 2100 2000 1900 1800 3100 3000 2900 2800 2700 -20 2600 -2 2500 -15 2400 -10 2300 -1 -1.5 1700 0 -5 1600 0 -0.5 2200 2700 5 2100 2800 10 2000 2700 1 0.5 1900 2600 15 deg 1.5 1800 2500 Phase Balance 20 1700 2600 Amplitude Balance 2 1600 2400 Frequency [MHz] Frequency [MHz] [dB] 2300 1600 3100 3000 2900 2800 2700 2600 2500 2400 2300 2200 2100 2000 -3.6 1900 -36 1800 -3.3 1700 -3 -33 2200 -2.7 -30 2100 -2.4 -27 2000 -2.1 -24 1900 -1.8 -21 1800 -18 1700 [dB] 0 1600 [dB] Return Loss - Input 0 Frequency [MHz] Frequency [MHz] CMRR 0 -3 -6 -9 -12 -18 -21 -24 -27 -30 -33 3100 3000 2900 2800 2700 2600 2500 2400 2300 2200 2100 2000 1900 1800 1700 -36 1600 [dB] -15 Frequency [MHz] Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD1631J50100AHF Rev K Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. An example of a DC-biased footprint is also shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. DC Bias Footprint No Bias Footprint Circuit Pattern Dimensions are in Millimeters Mounting Footprint Circuit Pattern Footprint Pad (s) Footprint Pad (s) Solder Resist Solder Resist Dimensions are in Millimeters Mounting Footprint Plated thru holes to ground Capacitor 6x .41 4x .25 Plated thru holes to ground 6x .41 DC Bias 3x Transmission lines 3x Transmission lines .04 .04 6x .33 6x .33 .66 .66 PART ORIENTATION TOP DOWN Plated thru holes to ground PART ORIENTATION TOP DOWN 4x .25 Visit us at www.anaren.com Plated thru holes to ground USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD1631J50100AHF Rev K Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-D. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. 2.00 .25 4.00 1.75 3.50 8.00 1.60 2.41 .81 4.00 Direction of Part Feed (Unloading) Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282