BD1722J50100AHF

BD1722J50100AHF Rev E Ultra Low Profile 0805 Balun 50Ω to 100Ω Balanced Description: The BD1722J50100AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation wireless chipsets in an easy to use surface mount package covering the DCS, PCS, UMTS and CDMA frequencies. The BD1722J50100AHF is ideal for high volume manufacturing and is higher performance than traditional ceramic, and lumped element baluns. The BD1722J50100AHF has an unbalanced port impedance of 50Ω and a 100Ω balanced port impedance. This transformation enables single ended signals to be applied to differential ports on modern semiconductors. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The BD1722J50100AHF is available on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications: Specifications subject to change without notice Features: • • • • • • • • • • • 1700 – 2200 MHz 0.7mm Height Profile 50 Ohm to 2 x 50 Ohm DCS/PCS/UMTS/CDMA Low Insertion Loss Input to Output DC Isolation Surface Mountable Tape & Reel Non-conductive Surface RoHS Compliant Halogen Free ROOM (25°C) Parameter Min. Frequency Unbalanced Port Impedance Balanced Port Impedance Return Loss Insertion Loss* Amplitude Balance Phase Balance CMRR Power Handling @85oC Power Handling @105oC Operating Temperature 1700 9 -55 Typ. 50 100 13 0.9 0.4 4 29 *Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Max Unit 2200 MHz Ω Ω dB dB dB Degrees dB Watts Watts ºC 1.2 1.2 6 2.0 1.3 +140 Outline Drawing: 1 BD1722J50100AHF Rev E Typical Performance: 500 MHz. to 8.5 GHz. 2 BD1722J50100AHF Rev E Wide Band Performance: 1600 MHz. to 2300 MHz. 3 BD1722J50100AHF Rev E Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown on the next page. An example of a DC-biased footprint is also shown on the next page. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. No Bias Footprint DC Bias Footprint 4 BD1722J50100AHF Rev E Packaging and Ordering Information: Parts are available in reel and are packaged per EIA 481-D. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. Contact us: rf&s_support@ttm.com 5