BD2040J50100AHF

Model BD2040J50100AHF Rev C PRELIMINARY Ultra Low Profile 0805 Balun 50Ω to 100Ω Balanced Description The BD2040J50100AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation wireless chipsets in an easy to use surface mount package covering multiple ISM bands. The BD2040J50100AHF is ideal for high volume manufacturing and is higher performance than traditional ceramic and lumped element baluns. The BD2040J50100AHF has an unbalanced port impedance of 50 and a 100 balanced port impedance. This transformation enables single ended signals to be applied to differential ports on modern semiconductors. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The BD2040J50100AHF is available on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25C) Features:            2000 – 4000 MHz 0.7mm Height Profile 50 Ohm to 2 x 50 Ohm Multiple ISM bands Low Insertion Loss Input to Output DC Isolation Surface Mountable Tape & Reel Non-conductive Surface RoHS Compliant Halogen Free Parameter Min. Frequency Unbalanced Port Impedance Balanced Port Impedance Return Loss Insertion Loss* Amplitude Balance Phase Balance CMRR Power Handling @85C Power Handling @105C Operating Temperature 2650 13.0 -55 Typ. 50 100 16.9 0.8 0.6 8.2 21.7 Max Min. 3500 2000 10 1.0 1.3 13.0 2 1.2 +105 Typ. 50 100 14.2 1.06 0.8 15 17 -55 Max Unit 4000 MHz Ω Ω dB dB dB Degrees dB Watts Watts ºC 1.3 1.48 16.5 2 1.2 +105 * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD2040J50100AHF Rev C Typical Broadband Performance: 500 MHz. to 8.5 GHz. Insertion Loss 0 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 Frequency [MHz] 7500 8000 8500 7500 8000 8500 5000 4500 4000 3500 3000 2000 2500 1000 8500 8000 7500 7000 6500 -20 6000 -15 -2 5500 -1.5 5000 -10 4500 -1 1500 0 -5 500 0 -0.5 4000 6500 5 3500 7000 0.5 3000 6500 10 2500 7000 1 2000 5500 15 1500 6000 1.5 deg 2 1000 6000 Phase Balance 20 500 4500 Frequency [MHz] Amplitude Balance [dB] 5500 Frequency [MHz] 5000 3500 500 8000 8500 7000 7500 6000 6500 5500 4500 5000 3500 4000 2500 3000 -3.6 2000 -36 1000 -3.3 1500 -3 -33 4000 -2.7 -30 2500 -2.4 -27 3000 -2.1 -24 2000 -1.8 -21 1000 -18 1500 [dB] 0 -3 500 [dB] Return Loss - Input Frequency [MHz] CMRR 0 -3 -6 -9 -12 -18 -21 -24 -27 -30 -33 8500 8000 7500 7000 6500 6000 5500 5000 4500 4000 3500 3000 2500 2000 1500 1000 -36 500 [dB] -15 Frequency [MHz] Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD2040J50100AHF Rev C PRELIMINARY Typical Performance: 1900 MHz. to 4100 MHz. Insertion Loss 0 -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 4100 3900 4000 3700 3800 3800 3500 3600 3600 3100 3200 2900 4000 4100 3900 3200 3300 3000 3100 2800 2900 2700 2500 2600 2400 2300 2100 2200 4100 3900 4000 3700 3800 3500 3600 3300 3400 3100 -20 3200 -2 2900 -15 3000 -1.5 2700 -10 2800 -1 2500 -0.5 1900 0 -5 2000 0 2600 3700 5 2300 3300 10 0.5 2400 3400 15 1 2100 3400 1.5 deg 20 2200 3000 Phase Balance 2 1900 3500 Amplitude Balance 2000 2700 Frequency [MHz] Frequency [MHz] [dB] 2800 2500 1900 4100 3900 4000 3700 3800 3500 3600 3300 3400 3100 3200 2900 3000 2700 2800 2500 2600 2300 2400 2100 -3.6 2200 -36 1900 -3.3 2000 -3 -33 2600 -2.7 -30 2300 -2.4 -27 2400 -2.1 -24 2100 -1.8 -21 2200 -18 2000 [dB] [dB] Return Loss - Input 0 Frequency [MHz] Frequency [MHz] CMRR 0 -3 -6 -9 -12 -18 -21 -24 -27 -30 -33 4100 4000 3900 3800 3700 3600 3500 3400 3300 3200 3100 3000 2900 2800 2700 2600 2500 2400 2300 2200 2100 2000 -36 1900 [dB] -15 Frequency [MHz] Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD2040J50100AHF Rev C Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. An example of a DC-biased footprint is also shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. No Bias Footprint Circuit Pattern DC Bias Footprint Dimensions are in Millimeters Mounting Footprint Circuit Pattern Footprint Pad (s) Footprint Pad (s) Solder Resist Solder Resist Dimensions are in Millimeters Mounting Footprint Plated thru holes to ground 0402 Capacitor 6x .41 4x .25 Plated thru holes to ground 6x .41 3x Transmission lines 3x Transmission lines .04 6x .33 .04 6x .33 .66 .66 Plated thru holes to ground 4x .25 Visit us at www.anaren.com Plated thru holes to ground USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD2040J50100AHF Rev C PRELIMINARY Packaging Information: Parts are available in reel and are packaged per EIA 481-D. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282