C0810J5003AHF-B

Model C0810J5003AHF Rev D PRELIMINARY Ultra Low Profile 0805 3 dB, 90° Hybrid Coupler Description The C0810J5003AHF is a low cost, low profile sub-miniature high performance 3 dB coupler in an easy to use surface mount package. It is designed for 800 – 1000MHz applications including: GSM, WCDMA, CDMA and 900MHZ ISM applications. The C0810J5003AHF is ideal for balanced power and low noise amplifiers, plus signal distribution and other applications where low insertion loss and tight amplitude and phase balance are required. The C0810J5003AHF is available on tape and reel for pick and place high volume manufacturing. All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical and mechanical stability. All parts have been subjected to rigorous qualification testing and units are 100% RF tested . Detailed Electrical Specifications: Specifications subject to change without notice. Features:  800 – 1000 MHz  0.68 mm Height Profile  LTE Bands: 5,6,8,12,13,14, 17, 18, 19, 20  GSM, WCDMA & 900 MHz ISM  Surface Mountable  Tape & Reel  RoHS Compliant  Halogen-Free Parameter Frequency Port Impedance Return Loss Isolation Insertion Loss* Amplitude Balance Phase Balance Power Handling @85C Power Handling @105C Operating Temperature Group Delay (0.7-1.0GHz) (nSec) Extended Band Min Typ Max Nominal Band Min Typ Max 700 800 18 18 1000 50 28 21 0.5 0.6 4 -55 21 18 0.6 0.9 7 4 3 +105 1000 50 31 23 0.5 0.6 4 -55 0.6 0.9 7 4 3 +105 25°C Unit MHz Ω Ω dB dB dB Degrees Watts Watts ºC Min. Typ. Max. 0.20 0.24 0.28 Outline Drawing Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model C0810J5003AHF Rev D Typical Broadband Performance: 500 MHz. to 8000 MHz. Insertion Loss 0.0 -3 -3.0 -6 -6.0 -9.0 -12 -12.0 -15 -15.0 7000 7500 8000 7000 7500 8000 4500 6500 5000 4000 4500 3500 2500 3000 2000 1000 1500 8000 7500 6500 7000 -360 6000 -288 -10 5500 -216 -8 4500 -144 -6 5000 -4 4000 -72 500 0 -2 3000 6500 72 0 3500 5500 144 2 2500 6000 216 4 2000 5500 288 6 deg 360 8 1000 5000 Phase Balance 10 1500 6000 Amplitude Balance 500 4000 3000 Frequency [MHz] Frequency [MHz] [dB] 3500 2500 500 8000 7500 6500 7000 6000 5500 4500 5000 4000 3000 -36.0 3500 -33.0 -36 2500 -30.0 -33 2000 -27.0 -30 1000 -24.0 -27 1500 -21.0 -24 1500 -18.0 -21 2000 -18 1000 [dB] -9 500 [dB] Return Loss - Input 0 Frequency [MHz] Frequency [MHz] Isolation 0 -3 -6 -9 -12 -18 -21 -24 -27 -30 -33 8000 7500 6500 7000 6000 5500 4500 5000 4000 3500 2500 3000 2000 1500 500 -36 1000 [dB] -15 Frequency [MHz] Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model C0810J5003AHF Rev D PRELIMINARY Typical Performance: 700 MHz. to 1100 MHz. Insertion Loss Return Loss - Input 0.0 0 -0.3 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 -1.8 -3.6 700 Frequency [MHz] Frequency [MHz] Phase Balance Amplitude Balance 20 15 1 10 0.5 5 0 1100 1000 -20 900 -15 -2 800 -10 700 -1 -1.5 Frequency [MHz] 1100 -5 1000 -0.5 900 0 800 deg 1.5 700 2 [dB] 1100 -3.3 -36 1000 -3.0 -33 1100 -2.7 -30 1000 -2.4 -27 900 -2.1 -24 800 -21 800 -18 900 [dB] -6 700 [dB] -3 Frequency [MHz] C0810J5003AHF Power Derating Curve Isolation 9 0 800-1000MHz 8 -3 -6 7 -9 6 -12 Power (Watts) -18 -21 -24 5 4 3W -27 3 -30 2 -33 Frequency [MHz] 1100 1000 900 800 -36 700 [dB] -15 1 0 0 20 40 60 80 100 105 120 140 160 180 200 Mounting Interface Temperature ( C) Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model C0810J5003AHF Rev D Definition of Measured Specifications Mathematical Representation Parameter Return Loss Isolation Insertion Loss Definition i, j, k, m is denoted as the port index of input, isolated, direct and coupled port for specific pin configuration shown in the table The impedance match of the coupler to a 50 system. Return Loss is an alternate means to express VSWR. The input power divided by the sum of the power at the two output ports. The input power divided by the sum of the power at the two output ports. Amplitude Balance The difference in power between the two outputs. Phase Balance The difference in phase angle between the two output ports. 20log10 ( Sii ) 20log10 S ji 2 2 10log10 ( Smi  Ski ) 20 log10 ( Ski ) Smi Ski  Smi  90o *100% RF test is performed per spec definition for pin configuration 1 and port 1 (input port) is connected to pin1, port 2 (isolated port) is connected to pin 3, port 3 (direct port) is connected to pin 4 and port 4 (isolated) is connected to pin 6. Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model C0810J5003AHF Rev D PRELIMINARY Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. 6x 0.35 4x 0.30 6x 0.33 0.66 6x 0.05 4x Transmission Line Plated thru holes to ground Circuit Pattern Footprint Pad (s) Solder Resist Dimensions are in Millimeters Mounting Footprint Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model C0810J5003AHF Rev D Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-D. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282