C150N50Z4

C150N50Z4 5Z2050 Surface Mount Termination 150 Watts, 50 Description Features:  RoHS Compliant  150 Watts  DC – 4.0 GHz  AlN Ceramic  Non-Nichrome Resistive Element  Low VSWR  100% Tested  Small Size The C150N50Z4 is high performance Aluminum Nitride (AlN) surface mount termination intended as a cost competitive alternative to Beryllium Oxide (BeO). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating high power 90 degree couplers and for use in microstrip circuits. The termination is also RoHS compliant! General Specifications Resistive Element Substrate Terminal Finish Operating Temperature Thick film AlN Ceramic Matte Tin over Nickel Barrier -50 to +200C (see de rating chart) Tolerance is 0.010”, unless otherwise specified. Designed to meet o r exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Resistance Value: Power: Frequency Range: Return Loss 50 Ohms,  2% 150 Watts DC – 4.0 GHz >24 dB DC - 2.7 GHz >20 dB DC - 4.0 GHz Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 C150N50Z4 Typical Performance: C150N50Z4 C150N50Z4 Power De-rating: Mounting Footprint: *Actual performance could be limited by the solder properties of the application Mounting Footprint and Procedure: USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing.