C1W131350R0J5A3

Model C1W1313XXXXJ5A3 RESISTOR, SMT .05 X .05, 5%, 1W General Specifications: Features Resistive Element: Au Substrate: 5 mil Lapped BeO Terminal Finish: Au/Sn Solder over gold Operating Temperature: -55 °C TO 125 °C Electrical Specifications: • 5 mil Lapped BeO Resistance Value: Multiple (see table 1) • Thick Film Construction Power: 1W • Non-Nichrome Resistive Element Temperature Coefficient (TCR) ppm/°C: 300/°C • Terminals: Note: Tolerance is ±unless otherwise specified. Designed to meet of exceed applicacble portions of MIL-E-5400. Operation temperature (see chart for derating temperatures). Specifications subject to change with out notice. Au/Sn Solder over gold • Solder Mount • Resistance Tolerance 5% Outline Drawing: Dimensions shown in inches ±0.002 unless otherwise shown .012 .005 min 2 PLCS. .005 ±.010 0.001 .050 .046 .050 2 PLCS. USA / Canada: Toll Free: Europe: Availalble on Tape and Reel for Pick and Place Manufacturing Sheet 1 of 2 (315)432-8909 (800) 544-2414 +44 2392-232392 C1W1313XXXXJ5A3 (097) REV A.xlsx Model C1W1313XXXXJ5A3 Values: Table 1 Part Number Value (Ohms) Tolerance C1W131350R0J5A3 50 ±5% C1W13131000J5A3 100 ±5% Power De-rating: Suggested Mounting: For best RF performance, mount with epoxy, resistive side down. For best power performance, epoxy or solder mount with backside pad down Gold terminals are wire bondable. USA / Canada: Toll Free: Europe: Availalble on Tape and Reel for Pick and Place Manufacturing Sheet 2 of 2 (315)432-8909 (800) 544-2414 +44 2392-232392 C1W1313XXXXJ5A3 (097) REV A.xlsx