C2023J5003AHF

Model C2023J5003AHF Rev G PRELIMINARY Ultra Low Profile 0805 3 dB, 90° Hybrid Coupler Description The C2023J5003AHF is a low cost, low profile sub-miniature high performance 3 dB coupler in an easy to use surface mount package. It is designed for WiMax,WiBro, UMTS, and IMT2000 applications. The C2023J5003AHF is ideal for balanced power and low noise amplifiers, plus signal distribution and other applications where low insertion loss and tight amplitude and phase balance are required. The C2023J5003AHF is available on tape and reel for pick and place high volume manufacturing. All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical and mechanical stability. All parts have been subjected to rigorous qualification testing and units are 100% RF tested. Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25C) Features:  1985 – 2350 MHz  0.7mm Height Profile  WiMax, WiBro, UMTS & IMT2000 applications  High Isolation & Low Loss  Surface Mountable  Tape & Reel  Non-conductive Surface  RoHS Compliant  Halogen-Free Parameter Min. Frequency Port Impedance Return Loss Isolation Insertion Loss* Amplitude Balance Phase Balance (relative to 90°) Power Handling @ 85C Power Handling @ 105C Operating Temperature 1985 18 21 Typ. 50 22 25 0.3 0.1 2 Max Unit 2350 MHz Ω dB dB dB dB Degrees Watts Watts ºC 0.4 0.8 6 4 3 +105 -55 * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing Top View (Nearside) 2.04±0.10 Bottom View (Farside) Side View 4x 0.37 0.68±0.07 1 2 3 2x 0.15 1.29±0.10 6x 0.98 6x 0.22 Orientation Marker Denotes Pin Location Orientation Marker Denotes Pin Location 6 5 4 4x 0.65 6x 0.30 Pin 1 2 3 4 5 6 Configuration-1 Input GND Isolated Direct GND Coupled Configuration-2 Isolated GND Input Coupled GND Direct Configuration-3 Direct GND Coupled Input GND Isolated Configuration-4 Coupled GND Direct Isolated GND Input Visit us at www.anaren.com Mechanical Outline -Dimensions are in Millimeters -Tolerances are Non-Cumulative USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model C2023J5003AHF Rev G Typical Broadband Performance: 500 MHz. to 6000 MHz. Insertion Loss -0.300 -6 -0.600 -9 -0.900 -12 -1.200 -15 -1.500 4500 6000 0.5 5 4500 4000 3500 3000 2500 2000 1500 -20 6000 -2 5500 -15 5000 -1.5 4500 -10 4000 -1 1000 0 -5 500 0 -0.5 3500 6000 10 3000 5500 1 2500 5500 15 2000 5000 20 deg 2 1500 4000 Phase Balance 1.5 1000 5000 Amplitude Balance 500 3500 Frequency [MHz] Frequency [MHz] [dB] 3000 2000 500 6000 5500 5000 4500 4000 3500 -3.600 3000 -3.300 -36 2500 -3.000 -33 2000 -2.700 -30 1500 -2.400 -27 1000 -2.100 -24 2500 -1.800 -21 1000 -18 1500 [dB] 0.000 -3 500 [dB] Return Loss - Input 0 Frequency [MHz] Frequency [MHz] Isolation 0 -3 -6 -9 -12 -18 -21 -24 -27 -30 -33 6000 5500 5000 4500 4000 3500 3000 2500 2000 1500 1000 -36 500 [dB] -15 Frequency [MHz] Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model C2023J5003AHF Rev G PRELIMINARY Typical Performance: 1900 MHz. to 2400 MHz. Insertion Loss Return Loss - Input 0.0 0 -0.3 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 -1.8 Frequency [MHz] Phase Balance Amplitude Balance 20 15 1 10 0.5 5 0 1900 2400 2300 2200 -20 2100 -15 -2 2000 -10 1900 -1 -1.5 Frequency [MHz] 2400 -5 2300 -0.5 2200 0 2100 deg 1.5 2000 2 [dB] 2400 1900 Frequency [MHz] 2300 -3.6 2200 -3.3 -36 2400 -3.0 -33 2300 -2.7 -30 2200 -2.4 -27 2100 -2.1 -24 2000 -21 2000 -18 2100 [dB] -6 1900 [dB] -3 Frequency [MHz] C2023J5003AHF Power Derating Curve 7 Isolation 0 2000-2300MHz 6 -3 -6 5 -9 -12 Power (Watts) -18 -21 -24 4W 4 3 -27 2 -30 -33 -36 Frequency [MHz] 2400 2300 2200 2100 2000 1 1900 [dB] -15 0 0 20 40 60 80 85 100 120 140 160 180 200 Mounting Interface Temperature ( C) Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model C2023J5003AHF Rev G Definition of Measured Specifications Mathematical Representation Parameter Return Loss Isolation Insertion Loss Definition i, j, k, m is denoted as the port index of input, isolated, direct and coupled port for specific pin configuration shown in the table The impedance match of the coupler to a 50 system. Return Loss is an alternate means to express VSWR. The input power divided by the sum of the power at the two output ports. The input power divided by the sum of the power at the two output ports. Amplitude Balance The difference in power between the two outputs. Phase Balance The difference in phase angle between the two output ports. 20log10 ( Sii ) 20log10 S ji 2 2 10log10 ( Smi  Ski ) 20log10 ( Ski ) Smi Ski  Smi  90o *100% RF test is performed per spec definition for pin configuration 1 and port 1 (input port) is connected to pin1, port 2 (isolated port) is connected to pin 3, port 3 (direct port) is connected to pin 4 and port 4 (isolated) is connected to pin 6. Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model C2023J5003AHF Rev G PRELIMINARY Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. 6x 0.35 4x 0.30 6x 0.33 0.66 6x 0.05 4x Transmission Line Plated thru holes to ground Circuit Pattern Footprint Pad (s) Solder Resist Dimensions are in Millimeters Mounting Footprint Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model C2023J5003AHF Rev G Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. 2.00 .25 4.00 1.75 3.50 8.00 1.60 2.41 .81 4.00 Direction of Part Feed (Unloading) Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282