C8A50Z4A

Model C8A50Z4A Surface Mount Termination 8 Watts, 50Ω Description The C8A50Z4A is high performance Alumina (Al203) Surface Mount termination intended as a low cost alternative to Aluminum Nitride (AlN). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The termination is also RoHS compliant! General Specifications Features: Resistive Element Substrate Terminal Finish Operating Temperature • RoHS Compliant • 8 Watts • DC – 6.0 GHz Thick film Al2O3 Ceramic Matte Tin over Nickel Barrier -55 to +125°C (see de rating chart) Tolerance is ±0.010”, unless otherwise specified. Designed to meet or exceed applicable portions of MIL-E-5400. All dimensions in inches. • Al203 Ceramic • Non-Nichrome Resistive Element Electrical Specifications 50 Ohms, ± 2% 8 Watts DC – 6.0 GHz >19 dB • 100% Tested Resistance Value: Power: Frequency Range: Return Loss • Small Size Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. • Low VSWR Outline Drawing HATCHED AREA(S) INDICATE LOCATION OF PLATED SURFACES UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES 1 of 2 USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model C8A50Z4A Typical Performance: C8A50Z4A Power De-rating: C8A50Z4A Mounting Footprint and Procedure: *Actual performance could be limited by the solder properties of the application Tape and Reel: 2 of 2 USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392